A new adaptive EWMA control chart for monitoring the process dispersion

The exponentially weighted moving average (EWMA), cumulative sum (CUSUM), and adaptive EWMA (AEWMA) control charts have had wide popularity because of their excellent speed in tracking infrequent process shifts, which are expected to lie within certain ranges. In this paper, we propose a new AEWMA dispersion chart that may achieve better performance over a range of dispersion shifts. The idea is to first consider an unbiased estimator of the dispersion shift using the EWMA statistic, and then based on the magnitude of this shift, select an appropriate value of the smoothing parameter to design an EWMA chart, named the AEWMA chart. The run length characteristics of the AEWMA chart are computed with the help of extensive Monte Carlo simulations. The AEWMA chart is compared with some of the existing powerful competitor control charts. It turns out that the AEWMA chart performs substantially and uniformly better than the EWMA‐S², CUSUM‐S², existing AEWMA, and HHW‐EWMA charts when detecting different kinds of shifts in the process dispersion. Moreover, an example is also used to explain the working and implementation of the proposed AEWMA chart.     

Mixed Exponentially Weighted Moving Average–Cumulative Sum Charts for Process Monitoring

The control chart is a very popular tool of statistical process control. It is used to determine the existence of special cause variation to remove it so that the process may be brought in statistical control. Shewhart‐type control charts are sensitive for large disturbances in the process, whereas cumulative sum (CUSUM)–type and exponentially weighted moving average (EWMA)–type control charts are intended to spot small and moderate disturbances. In this article, we proposed a mixed EWMA–CUSUM control chart for detecting a shift in the process mean and evaluated its average run lengths. Comparisons of the proposed control chart were made with some representative control charts including the classical CUSUM, classical EWMA, fast initial response CUSUM, fast initial response EWMA, adaptive CUSUM with EWMA‐based shift estimator, weighted CUSUM and runs rules–based CUSUM and EWMA. The comparisons revealed that mixing the two charts makes the proposed scheme even more sensitive to the small shifts in the process mean than the other schemes designed for detecting small shifts. Copyright © 2012 John Wiley & Sons, Ltd.     

A New Cumulative Sum Quality Control Scheme for Monitoring the Process Mean

A control chart is a powerful statistical process monitoring tool that is frequently used in many industrial and service organizations to monitor in‐control and out‐of‐control performances of the manufacturing processes. Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts have been recognized as potentially powerful tool in quality and management control. These control charts are sensitive to both small and moderate changes in the process. In this paper, we propose a new CUSUM (NCUSUM) quality control scheme for efficiently monitoring the process mean. It is shown that the classical CUSUM control chart is a special case of the proposed controlling scheme. The NCUSUM control chart is compared with some of the recently proposed control charts by using characteristics of the distribution of run length, i.e. average run length, median run length and standard deviation of run length. It is worth mentioning that the NCUSUM control chart detects the random shifts in the process mean substantially quicker than the classical CUSUM, fast initial response‐based CUSUM, adaptive CUSUM with EWMA‐based shift, adaptive EWMA and Shewhart–CUSUM control charts. An illustrative example is given to exemplify the implementation of the proposed quality control scheme. Copyright © 2013 John Wiley & Sons, Ltd.     

New memory‐type dispersion control charts

The exponentially weighted moving average (EWMA) control chart is a memory‐type process monitoring tool that is frequently used to monitor small and moderate disturbances in the process mean and/or process dispersion. In this study, we propose 2 new memory‐type control charts for monitoring changes in the process dispersion, namely, the generally weighted moving average and the hybrid EWMA charts. We use Monte Carlo simulations to compute the run length profiles of the proposed control charts. The run length comparisons of the proposed and existing charts reveal that the generally weighted moving average and hybrid EWMA charts provide better protection than the existing EWMA chart when detecting small to moderate shifts in the process dispersion. An illustrative dataset is also used to show the superiority of the proposed charts over the existing chart.     

The Performance of the Adaptive Exponentially Weighted Moving Average Control Chart with Estimated Parameters

The adaptive exponentially weighted moving average (AEWMA) control chart has the advantage of detecting balance mixed range of mean shifts. Its performance has been studied under the assumption that the process parameters are known. Under this assumption, previous studies have shown AEWMA to provide superior statistical performance when compared with other different types of control charts. In practice, however, the process parameters are usually unknown and are required to be estimated. Using a Markov Chain approach, we show that the performance of the AEWMA control chart is affected when parameters are estimated compared with the known‐parameter case. In addition, we show the effect of different standard deviation estimators on the chart performance. Finally, a performance comparison is conducted between the exponentially weighted moving average (EWMA) chart and the AEWMA chart when the process parameters are unknown. We recommend the use of the AEWMA chart over the ordinary EWMA chart especially when a small number of Phase I samples is available to estimate the unknown parameters. Copyright © 2012 John Wiley & Sons, Ltd.     

An adaptive EWMA control chart for monitoring the process mean in Bayesian theory under different loss functions

The Shewhart control chart is used for detecting the large shift and an exponentially weighted moving average (EWMA) control chart is used for detecting the small/moderate shift in the process mean. A scheme that combines both the Shewhart control chart and the EWMA control chart in a smooth way is called the adaptive EWMA (AEWMA) control chart. In this paper, we proposed a new AEWMA control chart for monitoring the process mean in Bayesian theory under different loss functions (LFs). We used informative (conjugate prior) under two different LFs: (1) squared error loss function and (2) linex loss function for posterior and posterior predictive distributions. We used the average run length and standard deviation of run length to measure the performance of the AEWMA control chart in the Bayesian theory. A comparative study is conducted for comparing the proposed AEWMA control chart in Bayesian theory with the existing Bayesian EWMA control chart. We conducted a Monte Carlo simulation study to evaluate the proposed AEWMA control chart. For the implementation purposes, we presented a real-data example.     

New GWMA‐CUSUM control chart for monitoring the process dispersion

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts have been widely accepted because of their fantastic speed in identifying small‐to‐moderate unusual variations in the process parameter(s). Recently, a new CUSUM chart has been proposed that uses the EWMA statistic, called the CS‐EWMA chart, for monitoring the process variability. On similar lines, in order to further improve the detection ability of the CS‐EWMA chart, we propose a CUSUM chart using the generally weighted moving average (GWMA) statistic, named the GWMA‐CUSUM chart, for monitoring the process dispersion. Monte Carlo simulations are used to compute the run length profiles of the GWMA‐CUSUM chart. On the basis of the run length comparisons, it turns out that the GWMA‐CUSUM chart outperforms the CUSUM and CS‐EWMA charts when identifying small variations in the process variability. A simulated dataset is also used to explain the working and implementation of the CS‐EWMA and GWMA‐CUSUM charts.     

On mixed memory control charts based on auxiliary information for efficient process monitoring

Control charts are popular monitoring tools in statistical process control toolkit. These are used to identify assignable causes in the process parameters (location and/or dispersion). These assignable causes result in a shift in the process parameter(s). The shift can be categorized into three sizes (small, moderate, and large). Memory control charts such as the exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts are effective for identifying small-to-moderate shift(s) in the process. Likewise, mixed memory control charts are useful for efficient process monitoring. In this study, we have proposed two new mixed memory control charts based on auxiliary information named MxMEC and MxMCE control charts to improve the efficiency of these mixed charts. The MxMEC chart is a merger of the auxiliary information based MxEWMA chart and the classical CUSUM chart. Likewise, the MxMCE chart integrates the auxiliary information based MxCUSUM with the classical EWMA chart. The proposed MxMEC and MxMCE charts are evaluated through famous performance measures including average run length, extra quadratic loss, relative average run length, and performance comparison index. The performance of the study proposals is compared with the existing counterparts such as the classical CUSUM and EWMA, MxCUSUM, MxEWMA, MEC, MCE, and runs rules-based CUSUM charts. The comparisons revealed the superiority of the proposed charts against other competing charts particularly for small-to-moderate shifts in the process location. Finally, a real-life data is used to show the implementation procedure of the proposed charts in practical situations.     

A New Hybrid Exponentially Weighted Moving Average Control Chart for Monitoring Process Mean

Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are commonly used for monitoring the process mean. In this paper, a new hybrid EWMA (HEWMA) control chart is proposed by mixing two EWMA control charts. An interesting feature of the proposed control chart is that the traditional Shewhart and EWMA control charts are its special cases. Average run lengths are used to evaluate the performances of each of the control charts. It is worth mentioning that the proposed HEWMA control chart detects smaller shifts substantially quicker than the classical CUSUM, classical EWMA and mixed EWMA–CUSUM control charts. Copyright © 2012 John Wiley & Sons, Ltd.     

Mixed Cumulative Sum–Exponentially Weighted Moving Average Control Charts: An Efficient Way of Monitoring Process Location

Shewhart, exponentially weighted moving average (EWMA), and cumulative sum (CUSUM) charts are famous statistical tools, to handle special causes and to bring the process back in statistical control. Shewhart charts are useful to detect large shifts, whereas EWMA and CUSUM are more sensitive for small to moderate shifts. In this study, we propose a new control chart, named mixed CUSUM‐EWMA chart, which is used to monitor the location of a process. The performance of the proposed mixed CUSUM‐EWMA control chart is measured through the average run length, extra quadratic loss, relative average run length, and a performance comparison index study. Comparisons are made with some existing charts from the literature. An example with real data is also given for practical considerations. Copyright © 2014 John Wiley & Sons, Ltd.     

Distribution‐free mixed cumulative sum‐exponentially weighted moving average control charts for detecting mean shifts

In this paper, we propose distribution‐free mixed cumulative sum‐exponentially weighted moving average (CUSUM‐EWMA) and exponentially weighted moving average‐cumulative sum (EWMA‐CUSUM) control charts based on the Wilcoxon rank‐sum test for detecting process mean shifts without any distributional assumption of the underlying quality process. The performances of the proposed charts are measured through the average run‐length, relative mean index, average extra quadratic loss, and average ratio of the average run‐length and performance comparison index. It is found that the proposed charts perform better than its counterparts considered in this paper under non‐normal distributions and outperform the classical mixed CUSUM‐EWMA and EWMA‐CUSUM charts in many cases under the normal distribution. The effect of the phase I sample size is also investigated on the phase II performance of the proposed charts. A numerical illustration is given to demonstrate the implementation and simplicity of the proposed charts.     

New Synthetic CUSUM and Synthetic EWMA Control Charts for Monitoring the Process Mean using Auxiliary Information

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are potentially powerful process monitoring tool because of their excellent speed in detecting small to moderate shifts in the process parameters. These control charts can be further improved by integrating them with the conforming run length control chart, resulting in the synthetic CUSUM (SynCUSUM) and synthetic EWMA (SynEWMA) charts. In this paper, we enhance the detection abilities of the SynCUSUM and SynEWMA charts using the auxiliary information. With suitable assumptions, the proposed control charts encompass the existing SynCUSUM, SynEWMA, CUSUM, and EWMA charts. Extensive Monte Carlo simulations are used to study the run length profiles of the proposed control charts. It turns out that the proposed near‐optimal control charts with the auxiliary information perform uniformly and substantially better than the existing near‐optimal SynCUSUM, SynEWMA, CUSUM, and EWMA charts. The proposed and existing control charts are also illustrated with the help of an example. Copyright © 2017 John Wiley & Sons, Ltd.     

A Multivariate Exponentially Weighted Moving Average Control Chart

A multivariate extension of the exponentially weighted moving average (EWMA) control chart is presented, and guidelines given for designing this easy-to-implement multivariate procedure. A comparison shows that the average run length (ARL) performance of this chart is similar to that of multivariate cumulative sum (CUSUM) control charts in detecting a shift in the mean vector of a multivariate normal distribution. As with the Hotelling's χ² and multivariate CUSUM charts, the ARL performance of the multivariate EWMA chart depends on the underlying mean vector and covariance matrix only through the value of the noncentrality parameter. Worst-case scenarios show that Hotelling's χ² charts should always be used in conjunction with multivariate CUSUM and EWMA charts to avoid potential inertia problems. Examples are given to illustrate the use of the proposed procedure.     

New Synthetic EWMA and Synthetic CUSUM Control Charts for Monitoring the Process Mean

Exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) control charts are potentially powerful statistical process monitoring tools because of their excellent speed in detecting small to moderate persistent process shifts. Recently, synthetic EWMA (SynEWMA) and synthetic CUSUM (SynCUSUM) control charts have been proposed based on simple random sampling (SRS) by integrating the EWMA and CUSUM control charts with the conforming run length control chart, respectively. These synthetic control charts provide overall superior detection over a range of mean shift sizes. In this article, we propose new SynEWMA and SynCUSUM control charts based on ranked set sampling (RSS) and median RSS (MRSS) schemes, named SynEWMA‐RSS and SynEWMA‐MRSS charts, respectively, for monitoring the process mean. Extensive Monte Carlo simulations are used to estimate the run length characteristics of the proposed control charts. The run length performances of these control charts are compared with their existing powerful counterparts based on SRS, RSS and MRSS schemes. It turns out that the proposed charts perform uniformly better than the Shewhart, optimal synthetic, optimal EWMA, optimal CUSUM, near‐optimal SynEWMA, near‐optimal SynCUSUM control charts based on SRS, and combined Shewhart‐EWMA control charts based on RSS and MRSS schemes. A similar trend is observed when constructing the proposed control charts based on imperfect RSS schemes. An application to a real data is also provided to demonstrate the implementations of the proposed SynEWMA and SynCUSUM control charts. Copyright © 2014 John Wiley & Sons, Ltd.     

CS‐EWMA Chart for Monitoring Process Dispersion

Control charts are the most extensively used technique to detect the presence of special cause variations in processes. They can be classified into memory and memoryless control charts. Cumulative sum and exponentially weighted moving average control charts are memory‐type control charts as their control structures are developed in such a way that the past information is not ignored as it is done in the case of memoryless control charts, like the Shewhart‐type control charts. The present study is based on the proposal of a new memory‐type control chart for process dispersion. This chart is named as CS‐EWMA chart as its plotting statistic is based on a cumulative sum of the exponentially weighted moving averages. Comparisons with other memory charts used to monitor the process dispersion are done by means of the average run length. An illustration of the proposed technique is done by applying the CS‐EWMA chart on a simulated dataset. Copyright © 2012 John Wiley & Sons, Ltd.     

New EWMA control charts for monitoring process dispersion using auxiliary information

The exponentially weighted moving average (EWMA) control chart is a well‐known statistical process monitoring tool because of its exceptional pace in catching infrequent variations in the process parameter(s). In this paper, we propose new EWMA charts using the auxiliary information for efficiently monitoring the process dispersion, named the auxiliary‐information–based (AIB) EWMA (AIB‐EWMA) charts. These AIB‐EWMA charts are based on the regression estimators that require information on the quality characteristic under study as well as on any related auxiliary characteristic. Extensive Monte Carlo simulation are used to compute and study the run length profiles of the AIB‐EWMA charts. The proposed charts are comprehensively compared with a recent powerful EWMA chart—which has been shown to be better than the existing EWMA charts—and an existing AIB‐Shewhart chart. It turns out that the proposed charts perform uniformly better than the existing charts. An illustrative example is also given to explain the implementation and working of the AIB‐EWMA charts.     

Improving the Performance of Exponentially Weighted Moving Average Control Charts

A control chart is a graphical tool used for monitoring a production process and quality improvement. One such charting procedure is the Shewhart‐type control chart, which is sensitive mainly to the large shifts. For small shifts, the cumulative sum (CUSUM) control charts and exponentially weighted moving average (EWMA) control charts were proposed. To further enhance the ability of the EWMA control chart to quickly detect wide range process changes, we have developed an EWMA control chart using the median ranked set sampling (RSS), median double RSS and the double median RSS. The findings show that the proposed median‐ranked sampling procedures substantially increase the sensitivities of EWMA control charts. The newly developed control charts dominate most of their existing counterparts, in terms of the run‐length properties, the Average Extra Quadratic Loss and the Performance Comparison Index. These include the classical EWMA, fast initial response EWMA, double and triple EWMA, runs‐rules EWMA, the max EWMA with mean‐squared deviation, the mixed EWMA‐CUSUM, the hybrid EWMA and the combined Shewhart–EWMA based on ranks. An application of the proposed schemes on real data sets is also given to illustrate the implementation and procedural details of the proposed methodology. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel design of composite generally weighted moving average and cumulative sum charts

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) charts are popular statistical tools to improve the performance of the Shewhart chart in detecting small process shifts. In this study, we propose the mixed generally weighted moving average (GWMA)‐CUSUM chart and its reverse‐order CUSUM‐GWMA chart to enhance detection ability compared with existing counterparts. The simulation revealed that the mixed GWMA‐CUSUM and mixed CUSUM‐GWMA charts have the sensitivity to detect small process shifts and efficient structures compared with the mixed EWMA‐CUSUM and mixed CUSUM‐EWMA charts, respectively. Moreover, the mixed GWMA‐CUSUM chart with a large design parameter has robust performance, regardless of the high tail t distribution or right skewness gamma distribution.     

An adaptive exponentially weighted moving average chart for the mean with variable sampling intervals

The AEWMA control chart is an adaptive EWMA (exponentially weighted moving average) type chart that combines the Shewhart and the classical EWMA schemes in a smooth way. To improve the detection performance of the FSI (fixed sampling interval) AEWMA control chart 7 in terms of the ATS(average time to signal), this paper proposes a new VSI (variable sampling interval) AEWMA control chart. A Markov chain approach is used to calculate the ATS values of the new VSI AEWMA control chart, and comparative results show that the proposed control chart performs better than the standard FSI AEWMA control chart and than other VSI control charts over a wide range of shifts.     

Adaptive CUSUM and EWMA charts with auxiliary information and variable sampling intervals for monitoring the process mean

The variable sampling interval (VSI) feature enhances the sensitivity of a control chart that is based on fixed sampling interval (FSI). In this paper, we enhance the sensitivities of the auxiliary information-based (AIB) adaptive Crosier cumulative sum (CUSUM) (AIB-ACC) and adaptive exponentially weighted moving average (EWMA) (AIB-AE) charts using the VSI feature when monitoring a mean shift which is expected to lie within a given interval. The Monte Carlo simulations are used to compute zero-state and steady-state run length properties of these control charts. It is found that the AIB-ACC and AIB-AE charts with VSI feature are uniformly more sensitive than those based on FSI feature. Real datasets are also considered to demonstrate the implementation of these control charts.