Prostaglandin-like substances formed during autoxidation of methyl linolenate

Prostaglandin-like substances other than 3-(2-ethyl-5-hydroxy-3-oxo)-cyclopentanyl-2-propenal (compound I), which upon reacting with amino acids form reddish pigments, were purified, and their chemical structures were determined. Three red pigment-forming substances (RPS) in autoxidized methyl linolenate were purified successively by gel chromatography on Sephadex LH-20, column chromatography and thin layer chromatography on Silica Gel 60, and by high performance liquid chromatography on μ-Porasil. IR spectra of the RPS showed the absorption of an ester group (νC=O 1730 cm⁻¹ in CHCl₃) and of a longer branched chain (νC-H 2800–3100 cm⁻¹), in addition to the absorption bands observed in compound I. Electron impact mass spectra of the trimethylsilyl ethers obtained after reduction with NaBH₄ and NaBD₄ were analyzed in detail and compared with those of compound I. The structures of the RPS were identified as stereoisomeric methyl 8-[2-(2-formylvinyl)-3-hydroxy-5-oxo-cyclopentanyl]-octanoates derived from methyl 12-hydroperoxy-linolenate. Presented at the general meeting of the Japanese Society of Scientific Fisheries, held at Tohoku University, Sendai, Japan, October 1984.     

Analysis of oxidation states of vanadium in vanadia–titania catalysts by the IR spectra of adsorbed NO

Adsorption of NO on vanadia–titania samples pre-subjected to different reduction treatments has been studied by FTIR spectroscopy. When the NO adsorption is performed at 85 K on oxidized samples, antisymmetric NONO species, typical for V⁵⁺ sites, are detected and characterized by bands at 1779 and 1686 cm⁻¹. At ambient temperature, however, adsorption is negligible and only with time reactive adsorption occurs producing NO⁺ (2120 cm⁻¹), nitro/nitrato species (bands in the 1650–1100 cm⁻¹ region) and weakly adsorbed NO (broad band at 1915 cm⁻¹). Adsorption of NO at ambient temperature on reduced samples results in the formation of two types of species: (i) V⁴⁺(NO)₂ dinitrosyls characterized by ν_s(NO) and ν_as(NO) at 1903–1880 and 1769–1753 cm⁻¹, respectively, and (ii) V³⁺(NO)₂ complexes, which give rise to ν_s(NO) at 1834–1822 cm⁻¹ and ν_as(NO) at 1697–1685 cm⁻¹. At low temperature the dinitrosyls are transformed into species in which more than one (NO)₂ dimer is attached to one cationic site. Addition of O₂ to NO, preadsorbed on reduced vanadia–titania samples, results in a fast oxidation of the V³⁺(NO)₂ species, whereas the V⁴⁺(NO)₂ complexes are more stable and do not disappear completely in the presence of oxygen. The results obtained suggest that NO is a convenient probe molecule for the analysis of the oxidation state of vanadium in vanadia–titania catalysts. To prevent oxidation of reduced vanadium sites, low equilibrium pressures of NO and registration of the IR spectrum soon after the NO admission are recommended. This revised version was published online in August 2006 with corrections to the Cover Date.     

IRS study of ethylene polymerization catalyst SiO2/MAO/zirconocene

Summary Lewis acidic sites (LAS) of silica, modified with TMA and MAO samples differed by TMA content, have been characterized by IR spectroscopy (CO adsorption as probe molecule at 77 K). Two types of LAS were found on the surface of silica modified with MAO and TMA: M LAS of moderate strength (ν_CO= 2204−2212 cm⁻¹) and weak W LAS (ν_CO= 2194 cm⁻¹). The concentration of these acidic sites has been estimated. It was shown by IRS study Cp₂ZrMe₂ interacts both with W LAS and M LAS. Correlation between the amount of M LAS and the activity of ethylene polymerization has been found. Received: 13 October 1998/Revised version: 10 June 1999/Accepted: 10 June 1999     

Investigation of 12-Tungstophosphoric Acid Supported on Ce0.5Zr0.5O2 Solid Solution

The nature of the Keggin ions of tungstophosphoric acid interacting with Ce_0.5Zr_0.5O₂ solid solution has been investigated. The vibrational study shows additional IR features at 1051 and 957 cm⁻¹ which are correlated to the primary Keggin anions interacting with Lewis sites involving Ce⁴⁺ and Zr⁴⁺ ions, and thus affecting the P–O and W=O_terminal bonds. The IR study indicates the formation of interfacial Ce⁴⁺–O–W and Zr⁴⁺–O–W bonds. The chemisorbed Keggin molecular layers on Ce_0.5Zr_0.5O₂ show activity towards conversion of acetophenone to styrene by Meerwein–Ponndorf–Verley reduction followed by dehydration. The activity is correlated with the relative intensities of IR peaks at 1051 and 957 cm⁻¹ of the perturbed Keggin molecular layers.     

Polymeric ionic liquid membranes as electrolytes for lithium battery applications

A new kind of polymeric ionic liquid (PIL) membrane based on guanidinium ionic liquid (IL) with ester and alkyl groups was synthesized. On addition of guanidinium IL, lithium salt, and nano silica in the PIL, a gel PIL electrolyte was prepared. The chemical structure of the PIL and the properties of gel electrolytes were characterized. The ionic conductivity of the gel electrolyte was 5.07 × 10⁻⁶ and 1.92 × 10⁻⁴ S cm⁻¹ at 30 and 80 °C, respectively. The gel electrolyte had a low glass transition temperature (T _g ) under −60 °C and a high decomposition temperature of 310 °C. When the gel polymer electrolyte was used in the Li/LiFePO₄ cell, the cell delivered 142 mAh g⁻¹ after 40 cycles at the current rates of 0.1 C and 80 °C.     

A Novel Dinucleating Ligand-Containing Hexabenzimidazoles and Its Dinuclear Zinc Complex Bridged by a Carboxylate Group for the Hydrolysis of 2-Hydroxypropyl-p-nitrophenyl phosphate

A dinuclear zinc(II) complex with the ligand bis{tris[2-(1-methylbenzimidazole-2-yl)ethyl]-methylamine}nitrilotriacetic acid sodium salt, L, was synthesized and characterized. Complex formation of L with Zn²⁺ in aqueous acetone was studied by Zn²⁺ titration using ¹H NMR and UV–vis spectroscopies. Analysis of the titration data indicates the formation of a dizinc complex. The ν_as(COO⁻) and ν_s(COO⁻) stretches were observed at 1572 and 1450 cm⁻¹, respectively. The low separation of the stretches, Δ_exp = 115 cm⁻¹, is an indication of chelating coordination of the carboxylate group between the two zinc(II) ions. The catalytic activity of [LZn₂]³⁺ 1, as a model for phosphatase that catalyze chemical transformation of phosphate ester, in the hydrolysis of the RNA model, 2-hydroxypropyl p-nitrophenyl phosphate, was examined in aqueous acetone buffer solution, pH 7.0–9.5. The mechanism of the catalytic hydrolysis suggests that the rate of acceleration is due to what is called double Lewis acid activation.     

An infrared absorption study of autoxidized methyl linoleate

Summary A study has been made of the infrared absorption spectra of autoxidized methyl linoleate in samples ranging from PV 1 to PV 940 m.e./kg. Principal changes occur in the frequency range 3400–3550 cm⁻¹ where bonded−OH groups absorb and at 1650–1775 cm⁻¹ where >c=0 groups absorb. Two maxima were observed in oxidized samples in the −OH absorption range: one sharp and distinct at 3467–70 cm⁻¹ which increased in intensity with increase in PV and a broad band which increased with increasing PV until it resolved into a true maximum at 3430 cm⁻¹. Reduction of typical oxidized samples with KI reagent resulted in disappearance of the 3430 cm⁻¹ band and appearance of a new band above 3500 cm⁻¹. The band at 3430 cm⁻¹ was attributed to −OOH groups associated by hydrogen bridging. The band at 3467 cm⁻¹ and the band appearing above 3500 cm⁻¹ were attributed to −OH groups, the band at the higher frequency resulting directly from reduction of a hydroperoxide. Absorption due to ketone and aldehyde carbonyl groups appeared only as an indefinite shoulder on the band due to the ester carbonyl. These were resolved by using the intensity of the sample with PV 1 as I_o and that for the oxidized samples as I. A plot of Log I_o/I then revealed three maxima. These indicate the presence of two and possibly three carbonyl containing substances other than the ester carbonyl in autoxidized methyl linoleate. Absorption in the two critical frequency ranges of fractions of autoxidized methyl linoleate eluted from an adsorption column correlate with interpretations made from ultraviolet absorption studies of the same substances. This paper reports research undertaken in cooperation with the Quartermaster Food and Container Institute for the Armed Forces and has been assigned number 211 in the series of papers approved for publication. The views or conclusions contained in this report are those of the authors. They are not to be construed as necessarily reflecting the views or indorsement of the Department of the Army. Presented at the Fall Meeting of the American Oil Chemists’ Society, New York, Nov. 17, 1948.     

FTIR study of CO adsorption on coked Pt–Sn/Al2O3 catalysts

Infrared spectra of adsorbed CO have been used as a probe to monitor changes in Pt site character induced by the coking of Pt/Al₂O₃ and Pt–Sn/Al₂O₃ catalysts by heat treatment in heptane/hydrogen. Four distinguishable types of Pt site for the linear adsorption of CO on Pt/Al₂O₃ were poisoned to different extents showing the heterogeneity of the exposed Pt atoms. The lowest coordination Pt atoms (ν(CO) < 2030 cm⁻¹) were unpoisoned whereas the highest coordination sites in large ensembles of Pt atoms (2080 cm⁻¹) were highly poisoned, as were sites of intermediate coordination (2030–2060 cm⁻¹). Sites in smaller two‐dimensional ensembles of Pt atoms (2060–2065 cm⁻¹) were partially poisoned, as were sites for the adsorption of CO in a bridging configuration. The addition of Sn blocked the lowest coordination sites and destroyed large ensembles of Pt by a geometric dilution effect. The poisoning of other sites by coke was impeded by Sn, this effect being magnified for Cl‐containing catalyst. Oxidation or oxychlorination of coked catalyst at 823 K followed by reduction completely removed coke from the catalyst surfaces. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical oxidation of an acid dye by active chlorine generated using Ti/Sn<Subscript>(1−<Emphasis Type="Italic">x</Emphasis>)</Subscript>Ir<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> electrodes

The generation of active chlorine on Ti/Sn_(1−x)Ir _x O₂ anodes, with different compositions of Ir (x = 0.01, 0.05, 0.10 and 0.30 ), was investigated by controlled current density electrolysis. Using a low concentration of chloride ions (0.05 mol L⁻¹) and a low current density (5 mA cm⁻²) it was possible to produce up to 60 mg L⁻¹ of active chlorine on a Ti/Sn_0.99Ir_0.01O₂ anode. The feasibility of the discoloration of a textile acid azo dye, acid red 29 dye (C.I. 16570), was also investigated with in situ electrogenerated active chlorine on Ti/Sn_(1−x)Ir _x O₂ anodes. The best conditions for 100% discoloration and maximum degradation (70% TOC reduction) were found to be: NaCl pH 4, 25 mA cm⁻² and 6 h of electrolysis. It is suggested that active chlorine generation and/or powerful oxidants such as chlorine radicals and hydroxyl radicals are responsible for promoting faster dye degradation. Rate constants calculated from color decay versus time reveal a zero order reaction at dye concentrations up to 1.0 × 10⁻⁴ mol L⁻¹. Effects of other electrolytes, dye concentration and applied density currents also have been investigated and are discussed.     

Polyamide-silica gel hybrids containing metal salts: Preparation via the sol-gel reaction

The hydrolysis and condensation of tetramethoxysilane in a DMF solution of polyamides containing LiCl, CaCl₂ or ZnCl₂, both in presence and absence of polyoxazoline, resulted in the facile formation of polyamide-silica gel hybrids. Films were cast from the resulting mixtures and evaporation of the solvent resulted in the formation of clear, transparent hybrids with the salts dispersed at the molecular level. Pyrolysis of hybrids at 600 °C gave porous silica. Pore size and surface characteristics of these silica gel samples indicated a porous nature with a pore radius of 1.1 nm for silica gels obtained from hybrids HPA-6 (containing no salt) and HPA-9 (containing ZnCl₂) and a surface area of 213 m² g⁻¹ and 310 m² g⁻¹, respectively. Silica gel from hybrid HPA-7 (containing LiCl) had a pore radius of 1.9 nm and a surface area of 15 m² g⁻¹. The silica gel samples obtained from hybrids HPA-6, HPA-7 and HPA-9 exhibited narrow slit-like pores with a pore volume of 0.68 cm³ g⁻¹. Received: 7 January 1997/Accepted: 6 March 1997     

Improved lipase-catalyzed incorporation of long-chain fatty acids into medium-chain triglycerides assisted by supercritical carbon dioxide extraction

Displacement of the equilibrium of the lipase-catalyzed interesterification between medium-chain triglyceride (MCT) and long-chain polyunsaturated fatty acid was accomplished by the removal of by-products with continuous supercritical carbon dioxide (SC−CO₂) extraction at 60°C and 100 kg/cm². The incorporation of eicosapentaenoic acid to MCT was appreciably improved by this method and was 1.3 times higher than that of the equilibrium state (47 wt%) that was obtained in a closed system. The immobilizedMucor miehei lipase was stable for more than 180 h in SC−CO₂ at 60°C and 100 kg/cm². Presented at ISF-JOCS World Congress, Tokyo, Japan, September 26–30, 1988.     

Synthesis of a novel amphiphilic polymer containing nucleobases in the self-organized nanospheres

A simple strategy to achieve molecular recognition in water is to make the polymers self-organized into nanospheres which could incorporate the functional groups containing hydrogen bonding sites into hydrophobic-lipophilic regions. A novel amphiphilic polymer, Poly(polyoxyethylene-600)-oxy-5-(6-(1-thymine)hexyl)) isophthaloyl (PPETHI), has been synthesized. The PPETHI polymer could self-organize into nanospheres in dilute aqueous solution, which were 150–300 nm in diameter as estimated by SEM. The isophthaloyl with side hexyl thymine of the polymer self-organized into hydrophobic regions and the PEG surrounded it. Molecular recognition between thymine in PPETHI polymer and adenine substrate has been studied by FT-IR. The FT-IR studies demonstrate that C₄=O of thymine has recognized with N-H of adenine through complementary nucleobases. It shows that the typical characteristic band at 3,352 cm⁻¹ of N-H stretching vibration of adenine shifted to 3,373 cm⁻¹ and the band at 1,685 cm⁻¹ of C₄=O of thymine shifted to 1,680 cm⁻¹. To confirm the formation of hydrogen bonds, the N-H band at 3,373 cm⁻¹ and C₄=O band at 1,680 cm⁻¹ have retrieved to 3,312 cm⁻¹ and 1,685 cm⁻¹ respectively upon heating to 115 °C or higher by means of variable temperature FT-IR. The formations of hydrogen-bonds between thymine in the polymer and adenine substrate in nanospheres were confirmed. It could enhance their interaction and loading capacity.     

Kinetic Studies on Oxirane Cleavage of Epoxidized Soybean Oil by Methanol and Characterization of Polyols

The kinetics of the oxirane cleavage of epoxidized soybean oil (ESO) by methanol (Me) without a catalyst was studied at 50, 60, 65, 70 °C. The rate of oxirane ring opening is given by k[Ep][Me]², where [Ep] and [Me] are the concentrations of oxiranes in ESO and methanol, respectively and k is a rate constant. From the temperature dependence of the kinetics thermodynamic parameters such as enthalpy (ΔH), entropy (ΔS), free energy of activation (ΔF) and activation energy (ΔE _a) were found to be 76.08 (±1.06) kJ mol⁻¹, −118.42 (±3.12) J mol⁻¹ k⁻¹, 111.39 (±2.86) kJ mol⁻¹, and 78.56 (±1.63) kJ mol⁻¹, respectively. The methoxylated polyols formed from the oxirane cleavage reaction , were liquid at room temperature and had three low temperature melting peaks. The results of chemical analysis via titration for residual oxiranes in the reaction system showed good agreement with IR spectroscopy especially the disappearance of epoxy groups at 825, 843 cm⁻¹ and the emergence of hydroxy groups at the OH characteristic absorption peak from 3,100 to 3,800 cm⁻¹.     

Reaction of the carbon filler and binder in production of heating elements

IR spectroscopy showed that the components react on the CF—binder boundary, as indicated by the differences in the intensity and position of the absorption bands of CO₃ ²⁻ groups at the frequency of 1805 cm⁻¹ and C=O and >C-O> groups at 1739 and 1241 cm⁻¹. Thermogravimetric analysis showed that the activation energy of degradation of carbon fibre composites (CFC) increases. This indicates formation of thermostable material with a specific structure. The CFC obtained can be classified as difficultly combustible materials. __________ Translated from Khimicheskie Volokna, No. 1, pp. 37–38, January–February, 2008.     

Stability determination of soy lecithin-based emulsions by Fourier transform infrared spectroscopy

The stability of soy lecithin-stabilized emulsions was determined by Fourier transform infrared spectroscopy. Oilin-water (o/w) emulsions were prepared with 6% (vol/vol) medium-chain triglycerides (MCT), 94% (vol/vol) water, and 4% (wt/vol) Lecigran and Lecimulthin soy lecithin. There were little or no differences between the 4% Lecigran and 4% Lecimulthin emulsions for all vibrational regions studied (OH at 3348 cm⁻¹, C=O at 1741 cm⁻¹, PO and C−O−C at 1157 cm⁻¹, and P−O−C at 1101 cm⁻¹), but the control emulsion, without emulsifier, had increased vibrations as the emulsion separated. The weaker vibrations of the more stable emulsions were probably due to reduced molecular interaction at the interface. However, added magnesium or calcium chloride enhanced the vibration of these groups, probably by disrupting the lecithin interaction at the emulsion interface.     

Free fatty acid formation and lipid oxidation on milled rice

Milled rice was stored at 37°C and 70% humidity and sampled regularly for 50 d. Rice surface lipid was extracted with isopropanol and analyzed for free fatty acids (FFA) and conjugated diene (CD) contents. Diffuse reflectance Fourier transform infrared (DRIFTS) spectra of the rice samples were also obtained. FFA and CD levels increased together during rice storage and exhibited three distinct phases. DRIFTS identified a decrease in intensity at 1746 cm⁻¹ (ester, −C=O) and increases in intensity at 1731 cm⁻¹ (aldehyde, −CO) and 1714 cm⁻¹ (fatty acid, −C=O) during storage, which correlated well with the chemical analysis data. DRIFTS spectral data were analyzed by a partial least squares regression method to identify spectral regions that correlate strongly with measured FFA and construct prediction models. Overall, the mid-infrared region (4000–400 cm¹) gave the best model (R=0.98, root mean square error of cross-validation=0.05) and also predcted the FFA content of milled rice well. The DRIFTS technique has potential for use in studying qualitative chemical changes on the milled rice surface lipids and for predicting FFA on milled rice.     

Long-term behavior of oil-based varnishes and paints I. Spectroscopic analysis of curing drying oils

The curing of drying oils at 60°C has been investigated by Fourier transform infrared spectroscopy and Fourier transform Raman analysis of linseed oil and poppyseed oil. In the first step, hydroperoxides are formed (broad vibration band centered around 3425 cm⁻¹) with concomitant conjugation and cis-trans isomerization of the double bonds (disappearance of cis bands at 3011 and 716 cm⁻¹, appearance of trans conjugated and trans nonconjugated bands at 987 and 970 cm⁻¹). The subsequent decomposition of hydroperoxides in the presence of oxygen leads to the formation of alcohols (nitrite band at 779 cm⁻¹ after nitrogen monoxide treatment), aldehydes (bands at 2810 and 2717 cm⁻¹ in gas phase), ketones (saturated and unsaturated at 1720 and 1698 cm⁻¹, respectively), carboxylic acids (saturated and unsaturated acid fluorides identified at 1843 and 1810 cm⁻¹ after SF₄ treatment), and peresters or γ-lactones (near 1770 cm⁻¹). A rapid decrease in the double-bond concentration is recorded when curing continues, and the formation of epoxides, characterized by a vibration band at 885 cm⁻¹, is observed. Thermolysis experiments have suggested the proposal of a reaction of addition of peroxyl radicals on the conjugated double bonds as a probable mechanism. This mechanism explains both the rapid disappearance of conjugated double bonds and the formation of epoxides as intermediate products observed in the initial step of curing.     

Kinetics of oxirane cleavage in epoxidized soybean oil

The kinetics of oxirane ring cleavage in epoxidized soybean oil have been studied using glacial acetic acid at 60, 70, 80 and 90°C. It was shown that the reaction can be successfully modelled as first order with respect to the epoxide concentration and second order with respect to acetic acid. The reaction velocity constant at 70°C was found to be 2 × 10⁻³ 1⁻³ hr⁻¹ mol⁻², the frequency factor, A, = 2.321 × 10⁷ hr⁻¹ and the energy of activation, E_a = 15.84 k cal mol⁻¹. The effects of the concentration of acetic acid and the temperature on the net yield of epoxides by in situ epoxidation were also studied on the basis of the predicted kinetic parameters of the reaction system.     

Isotopic Oxygen Exchange and EPR Studies of Superoxide Species on the SrF2/La2O3 Catalyst

By using the in situ IR spectroscopy, the superoxide species (O₂⁻), characterized by the O–O stretching peak at 1130 cm⁻¹, was detected on the SrF₂/La₂O₃ catalyst at temperatures up to 973 K. The introduction of ¹⁸O₂ isotope caused the 1130 cm⁻¹ peak to shift to lower wavenumbers (1095 and 1064 cm⁻¹), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance of the O₂⁻ species and that of the formation of C₂H₄ was observed, suggesting that O₂⁻ was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF₂/La₂O₃ catalyst. This conclusion was reinforced by the EPR experiments (g_xx = 2.0001, g_yy = 2.0045, g_zz = 2.0685), showing that O₂⁻ was the only paramagnetic oxygen species detectable on the O₂-preadsorbed SrF₂/La₂O₃ catalyst. These results suggest that superoxide O₂⁻ can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked.     

Nanocomposite hybrid membranes containing polyvinyl alcohol or poly(tetramethylene oxide) for fuel cell applications

New hybrid membranes containing polyvinyl alcohol (PVA) and poly(tetramethylene oxide) (PTMO) with heteropolyacid (HPA) as a hydrophilic inorganic modifier in an organic/inorganic matrix were developed for low-temperature proton exchange membrane fuel cells (PEMFCs). A maximum conductivity of 4.8 × 10⁻³ S cm⁻¹ was obtained at 80 °C and 75% RH for PVA/PWA/PTMO/H₃PO₄ (10/15/70/5 wt%), whereas the PVA/SiWA/MPTS/H₃PO₄ (50/10/10/30 wt%) membrane demonstrated a maximum conductivity of 8.5 × 10⁻³ S cm⁻¹ under identical conditions. These hybrid composite membranes were subsequently tested in a fuel cell. A maximum current density of 240 mA cm⁻² was produced at 70 °C for the PVA/PWA/PTMO/H₃PO₄ membrane, and the corresponding value for the PVA/SiWA/MPTS/H₃PO₄ membrane under identical conditions was 230 mA cm⁻². The small deviations in cell performance can be explained in terms of the variations in thickness of the membranes as well as differences in their conductivities. The fuel cell performances of these membranes decreased drastically when the temperature was increased to 100 °C.