Interaction between $$left{ {left. {10overline{1} 2} right}} right.$$ 10 1 ¯ 2 and $$left{ {left. {30overline{3} 4} right}} right.$$ 30 3 ¯ 4 twin in magnesium alloy

Journal of Materials Science - The dislocation–twin and twin–twin interaction play a crucial role as they impact morphology and distribution of twin interfaces, and ultimately influence...     

Experimental Measurements of Thermophysical Properties of \mathrm{Al}_{2}\mathrm{O}_{3}– and \mathrm{TiO}_{2}–Ethylene Glycol Nanofluids

This paper presents measurements of the thermal conductivity and the dynamic viscosity of $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol and $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol (1 % to 3 % particle volume fraction) nanofluids carried out in the temperature range from $0\,^{\circ }$ 0 ° C to $50\,^{\circ }$ 50 ° C. The thermal-conductivity measurements were performed by using a transient hot-disk TPS 2500S apparatus instrumented with a 7577 probe (2.001 mm in radius) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The dynamic-viscosity measurements and the rheological analysis were carried out by a rotating disk type rheometer Haake Mars II instrumented with a single-cone probe (60 mm in diameter and $1^{\circ }$ 1 ° ) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The thermal-conductivity measurements of the tested nanofluids show a great sensitivity to particle volume fraction and a lower sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a thermal-conductivity enhancement (with respect to pure ethylene glycol) from 1 % to 19.5 % and from 9 % to 29 %, respectively. $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids exhibit Newtonian behavior in all the investigated temperature and particle volume fraction ranges. The relative viscosity shows a great sensitivity to the particle volume fraction and weak or no sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a dynamic viscosity increase with respect to ethylene glycol from (4 to 5) % to 30 % and from 14 % to 50 %, respectively. Present experimental measurements were compared both with available measurements carried out by different researchers and computational models for thermophysical properties of nanofluids.     

Synthesis of $$\hbox {Ag}_{2}\hbox {Se}$$–graphene–$$\hbox {TiO}_{2} $$TiO2 nanocomposite and analysis of photocatalytic activity of $$\hbox {CO}_{2}$$CO2 reduction to $$\hbox {CH}_{3}\hbox {OH}$$CH3OH

The present work deals with the development of a new ternary composite, \(\hbox {Ag}_{2}\hbox {Se}\)–\(\hbox {G}\)–\(\hbox {TiO}_{2}\), using ultrasonic techniques as well as X-ray diffraction (XRD), scanning electron microscopy (SEM), high transmission electron microscopy (HTEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and UV–Vis diffuse reflectance spectra (DRS) analyses. The photocatalytic potential of nanocomposites is examined for \(\hbox {CO}_{2}\) reduction to methanol under ultraviolet (UV) and visible light irradiation. \(\hbox {Ag}_{2}\hbox {Se}\)–\(\hbox {TiO}_{2}\) with an optimum loading graphene of 10 wt% exhibited the maximum photoactivity, obtaining a total \(\hbox {CH}_{3}\hbox {OH}\) yield of 3.52 \(\upmu \hbox {mol}\,\hbox {g}^{-1}\,\hbox {h}^{-1}\) after 48 h. This outstanding photoreduction activity is due to the positive synergistic relation between \(\hbox {Ag}_{2}\hbox {Se}\) and graphene components in our heterogeneous system.     

Fusion Diagrams in the \mathrm{BiBO}_{3}–\mathrm{YbBO}_{3} and \mathrm{Bi}_{4}\mathrm{B}_{2}\mathrm{O}_{9}–\mathrm{YbBO}_{3} Systems

A calculation model of the Gibbs energy of ternary oxide compounds from the binary components was used. Thermodynamic properties of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2}\mathrm{O}_{3}\) – \(\mathrm{B}_{2}\mathrm{O}_{3}\) ternary systems in the condensed state were calculated. Thermodynamic data of binary and ternary compounds were used to determine the stable sections. The probability of reactions between the corresponding components in the \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) system was estimated. Fusibility diagrams of systems \(\mathrm{BiBO}_{3}\) – \(\mathrm{YbBO}_{3}\) and \(\mathrm{Bi}_{4} \mathrm{B}_{2} \mathrm{O}_{9}\) – \(\mathrm{YbBO}_{3}\) were studied by physical–chemical analysis. The isothermal section of the phase diagram of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) at 298 K is built, as well as the projection of the liquid surface of \(\mathrm{BiBO}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) – \(\mathrm{YbBO}_{3}\) .     

In situ synthesis and properties of self-reinforced $$\hbox {Si}_{3} \hbox {N}_{4}\textendash \hbox {SiO}_{2}\textendash \hbox {Al}_{2} \hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3} \ (\hbox {La}_{2}\hbox {O}_{3}$$) glass–ceramic composites

In-situ-grown \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\)-reinforced \(\hbox {SiO}_{2}\textendash \hbox {Al}_{2}\hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) self-reinforced glass–ceramic composites were obtained without any \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) seed crystal. These composites with different compositions were prepared in a nitrogen atmosphere for comparison of phase transformation and mechanical properties. The results showed that \(\hbox {SiO}_{2}\textendash \hbox {Al}_{2}\hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) glass can effectively promote \(\upalpha \)- to \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) phase transformation. The crystallized \(\hbox {Y}_{2}\hbox {Si}_{2}\hbox {O}_{7}\textendash \hbox {La}_{4.67}\hbox {Si}_{3}\hbox {O}_{13}\) phases with a high melting point significantly benefited the high-temperature mechanical properties of the composites. The \(\hbox {Si}_{3}\hbox {N}_{4}\textendash \hbox {SiO}_{2}\textendash \hbox {Al}_{2} \hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) glass–ceramic composites exhibit excellent mechanical properties compared with unreinforced glass–ceramic matrix, which is undoubtedly attributed to the elongated \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) grains. These glass–ceramic \(\hbox {Si}_{3}\hbox {N}_{4}\) composites with excellent comprehensive properties might be a promising material for high-temperature applications.     

Co-yield surfaces for {111}〈110〉 slip and {111}〈112〉 twinning in fcc metals

The co-yield surfaces in fcc single crystals for slip on 11111110 and twinning on {111}112 systems have been analyzed and derived systematically for the first time. The results demonstrated that only if the ratio of the critical resolved shear stress (CRSS) for twinning to that for slip is within the range of , slip and twinning can occur together. There are only two types of co-yield surfaces when is within this range. The corresponding analytical expressions of all possible types of yield vertices are also derived and tabulated. One type consists of 259 co-yield stress states when , which can be classified into 21 groups in stress space according to the crystal symmetry. The other type contains 259 co-yield stress states also when , which can be subdivided into 19 groups. Of the two types of the co-yield stress states, 139 ones are common and 120 ones are different.     

Thermodynamic Investigation of the Eutectic Mixture of the $$\hbox {LiNO}_{3}$$–$$\hbox {NaNO}_{3}$$NaNO3–$$\hbox {KNO}_{3}$$KNO3–$$\hbox {Ca}(\hbox {NO}_{3})_{2}$$Ca(NO3)2 System

Molten nitrate salt is usually employed as heat transfer or energy storage medium in concentrating solar power systems to improve the overall efficiency of thermoelectric conversion. In the present work, the liquidus curves of the \(\hbox {LiNO}_{3}\)–\(\hbox {NaNO}_{3}\)–\(\hbox {KNO}_{3}\)–\(\hbox {Ca}(\hbox {NO}_{3})_{2}\) system is determined by conformal ionic solution theory according to the solid–liquid equilibrium state of the binary mixture. The calculated eutectic temperature of the mixture is \(93.17\,{^{\circ }}\hbox {C}\), which is close to the experimental value of \(93.22\,{^{\circ }}\hbox {C}\) obtained from differential scanning calorimetry (DSC). Visualization observation experiments reveal that the quaternary eutectic mixture begins to partially melt when the temperature reaches \(50\,{^{\circ }}\hbox {C}\), and the degree of melting increases with temperature. The mixture is completely melted at \(\hbox {130}\,{^{\circ }}\hbox {C}\). The observed changes in the dissolved state at different temperatures correlate well with the DSC heat flow curve fluctuations.     

Molecular beam epitaxy of semipolar AlN(11\bar{2}2) and GaN(11\bar{2}2) on m-sapphire

We report on the plasma-assisted molecular-beam epitaxy of semipolar $\hbox{AlN}(11\bar{2}2)$ and GaN( $11\bar{2}2$ ) films on $(1\bar{1}00)$ m-plane sapphire. AlN deposited on m-sapphire settles into two main crystalline orientation domains, $\hbox{AlN}(11\bar{2}2)$ and $\hbox{AlN}(10\bar{1}0),$ whose ratio depends on the III/V ratio. Growth under moderate nitrogen-rich conditions enables to isolate the $(11\bar{2}2)$ orientation. The in-plane epitaxial relationships of $\hbox{AlN}(11\bar{2}2)$ on m-plane sapphire are $[11\bar{2}\bar{3}]_{\rm AlN} \vert \vert [0001]_{\rm sapphire}$ and $[1\bar{1}00]_{\rm AlN} \vert \vert [11\bar{2}0]_{\rm sapphire}.$ GaN deposited directly on m-sapphire results in ( $11\bar{2}2$ )-oriented layers with ( $10\bar{1}\bar{3}$ )-oriented inclusions. A ～100 nm-thick AlN( $11\bar{2}2$ ) buffer imposes the ( $11\bar{2}2$ )-orientation for the GaN layer grown on top. By studying the Ga-desorption on GaN( $11\bar{2}2$ ), we conclude that these optimal growth conditions corresponds to a Ga excess of one monolayer on the GaN( $11\bar{2}2$ ) surface.     

The effect of basal dislocation on { 11(2)1 } twin boundary evolution in a Mg-Gd-Y-Zr alloy

This study aims to understand the features of { 11(2)1 } twin boundaries in a high strain rate compressed Mg-10Gd-3Y-0.4Zr using electron backscatter diffraction (EBSD) and transmission electron microscopy(TEM).Based on the Schmid factor calculations,the basal -dislocations are easily activated within the { 11(2)1 } twin and suppressed in the surrounding matrix.The consequent basal dislocation-twin interaction during deformation can lead to the misorentiation deviation of { 11(2)1 } twin boundaries,accompanying with the formation of a step at the twin boundary.Such a { 11(2)1 } twin boundary evolution mechanism provides a new vision of twinning behavior in Mg alloys.     

深冲IF钢再结晶{111}纤维织构形成机制探讨

为了探讨深冲IF钢再结晶织构与退火温度之间的关系及{111}再结晶织构形成机制,采用X射线衍射三维取向(ODF)和背散射电子衍射(EBSD)分析技术并结合金相组织观察,利用Gibbs-Thom son方程对冷轧IF钢在不同退火温度下的再结晶织构演变规律及形成机制进行研究.实验结果表明:随着退火温度的增加,再结晶量逐渐增多,γ纤维织构强度亦相应增强,同时,α纤维织构强度则逐渐降低;冷轧IF钢再结晶初期的织构转变主要发生在γ纤维织构之间.研究表明,再结晶核心的形成主要以"显微择优形核"为主,晶核的长大则主要以择优生长为主,而Σ重位点阵晶界在再结晶γ纤维织构形成过程中起着重要作用.     

Structural characterization of the { 11-22 } twin boundary and the corresponding stress accommodation mechanisms in pure titanium

{11-22} compression twin plays an important role in accommodating deformation along the c axis of HCP metals.However,the studies on the interface structure of {11-22} twin boundary (TB),especially the twin tip,and the corresponding local stress release mechanism are still limited.This work studied the interface characters of {11-2 2} TB of a deformed pure titanium by transmission electron microscope.The { 11-2 2} TB presented serrated character,consisting of coherent twin boundary (CTB) and (0002)T // (11-2-2)M or (11-2-2)T // (0002)M steps,and the twin tip was fully composed of the basal-pyramidal (BPy) and pyramidal-basal (PyB) steps.The twin tip presents asymmetric morphology and the step height at the twin tip is much larger than that away from the twin tip.Two types of local stress accommodation mechanisms were observed: zonal dislocation emission and hexagonal close packed structure to face-centered cubic structure transformation.The zonal dislocation was produced by the dissociation of the 1/3 < 11-2-3 > dislocation that was nucleated at the twin tip and the phase transformation was introduced by emission of Shockley partial dislocations from the {11-2 2} twin boundary.     

金属团簇化合物W2Ag4S8(dppf)2激发态非线性光学性质

用Z扫描方法测量了金属团簇化合物W2Ag4S8(dppf)2的非线性光学响应,发现团簇W2Ag4S8(dppf)2具有显著的反饱和吸收和自聚焦等非线性光学性质.应用激发态理论分析了团簇W2Ag4S8(dppf)2的非线性吸收和非线性折射,结果与实验数据一致.通过数值模拟获得激发态和基态吸收截面比值Ka及非线性折射度比值Kr,阐述了Ka和Kr的物理意义.确定了团簇W2Ag4S8(dppf)2的三阶极化率x(3).团簇化合物W2Ag4S8(dppf)2对脉宽为纳秒的激发脉冲限幅效果比较好.     

Role of slip and {10-12} twin on the crystal plasticity in Mg-RE alloy during deformation process at room temperature

The deformation mechanism of slips and twins has a considerable influence on the plasticity of magne-sium alloys.However,the roles of slips and twins in the room-temperature deformation of Mg-rare earth(Mg-RE) alloys with high contents of rare earth elements is rarely investigated.Here,the microstruc-tural evolution and deformation mechanism of an aged Mg-SY-2Nd-3Sm-0.SZr alloy during uniaxial compression at room temperature were systematically investigated using in-situ electron-backscattered diffraction and transmission electron microscopy.The results indicated that in the early stage of defor-mation,the Mg-RE alloy was mainly controlled by the slip of dislocations in the basal plane and the coordinated c-axis strain of the {10-12} twin.With an increase in the strain,the grain orientation became more suitable for the initiation of pyramidal Ⅱ dislocations in the later stage of deforma-tion;these dominated the deformation mechanism.In the twin evolution of the Mg-RE alloy,there were three types of twin-twin interaction behaviors:(i) single twin variant 'parallel'structure,(ii) single twin variant 'cross' structure,and (iii) multi twin variant 'cross' structure.In addition,three types of twin-grain boundary interaction behaviors were summarized:(i) twin 'refracting through'grain boundary,(ii) twin'parallel through'grain boundary,and (iii) twin 'fusing through'grain boundary,which are expected to act as new means and solutions for the twin strengthening of magnesium alloys.     

Chemical synthesis and characterization of nano-sized rare-earth ruthenium pyrochlore compounds $$\hbox {Ln}_{2}\hbox {Ru}_{2}\hbox {O}_{7}$$ (Ln = rare earth)

The rare-earth ruthenium pyrochlores \(\hbox {Ln}_{2}\hbox {Ru}_{2}\hbox {O}_{7}\) (\(\hbox {Ln} = \hbox {La}^{3+}\), \(\hbox {Pr}^{3+}\), \(\hbox {Nd}^{3+}\), \(\hbox {Sm}^{3+}\) and \(\hbox {Gd}^{3+}\)) have been synthesized by the tartrate co-precipitation method, which allowed control of their composition and morphology. The preparation processes were monitored by thermal studies (TG-DTA). The obtained ruthenates were characterized by X-ray diffraction (XRD), TEM, d.c. electrical conductivity, thermoelectric power and dielectric constant measurements. X-ray diffraction patterns for all pyrochlore samples indicate a single-phase crystalline material with a cubic structure except for \(\hbox {LaRuO}_{3}\), which shows perovskite orthorhombic structure. The structural parameter for the solid obtained was successfully determined by Rietveld refinement based on the analysis of powder XRD pattern. The TEM photographs of these compounds exhibited the average particle size in the range of 36.4–73.8 nm. The data on the temperature variation of d.c. electrical conductivity showed that all rare-earth ruthanates are semiconductors and major carriers are electrons. The conduction mechanism of these compounds seems to be oxygen non-stoichiometry. The variation of dielectric constant at various frequencies showed initially interfacial polarization up to 275 kHz and beyond, which shows domain wall motion.