共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
挤压铸造过程中压室与冲头之间的摩擦作用,大大降低了压射机构的寿命。通过对冲头和压室的结构进行改进,可有效减小压室与冲头之间的摩擦作用,改善压射机构的工作性能,提高挤压铸造设备的整体可靠性。 相似文献
3.
压射功能是挤压铸造设备的核心功能之一,压射过程的运动参数是对铸件的质量有着重要的影响。通过对压射运动参数进行实验研究,发现压射速度存在明显的波动,并对造成压射速度波动的主要原因进行分析,提出了改进建议。 相似文献
4.
5.
新型水平送液竖向压射的挤压铸造工艺代替传统倾斜对接压射的挤压工艺,采用间接挤压铸造工艺与模具结构设计,设置双熔杯的浇注系统,降低充填时间,并结合实例给出了挤压工艺参数的确定原则,减少产品的内部缺陷,提高了铸件的力学性能和耐腐蚀能力,避免了表面融接痕和内部气孔导致的漏油,确保了铸造件的质量精度。 相似文献
6.
7.
夏宝林 《机械工人(热加工)》2004,(5):77-78
压铸机是特种精密铸造中的一种主要设备。通过其对压铸模实现:合模后经压射机构压射使液态或半液态金属充满模具型腔;经增压、保压、冷却;然后开模取出压铸件。压铸机在合模时应产生满足压铸工艺过程所要求的足够大的锁模力,否 相似文献
8.
9.
航空短型热电偶自动检测装置技术研究 总被引:1,自引:0,他引:1
介绍了短型热电偶的检定装置的技术要求、结构及计量检测方法,在航空工业科研生产技术研究领域中具有较强的实用性.短型热电偶的检定装置技术研究,一直都是国内温度专业研究的重点.由于短型热电偶检定炉的恒定均匀温场难以实现,所以,国内没有定型的标准短型热电偶检定装置.针对短型热电偶这一检测技术难点,设立<航空短型热电偶自动检测装置技术研究>课题进行研究,经过精心研制,优选最佳方案,研制成功一套性能稳定可靠的短型热电偶的检定装置,解决了专用温度传感器的检测难题,填补了特型短电偶的检测技术空白. 相似文献
10.
金属基复合材料差压浸渗凝固装置的设计 总被引:3,自引:0,他引:3
在分析金属基复合材料差压浸渗凝固原理的基础上设计差研制了新型金属基复合材料着压浸渗固装置,讨论充型压力、充型速度、预测件预热温度、浇注温度等工艺参数对铸造金属复合材料质量的影响。并指出各种参数值的选择范围。 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
18.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献