共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
介绍了异型管锯管机的设计,通过异型管锯管机的结构与工作原理分析,设计了气动系统和以FX1N-40MT为控制器、proface触摸屏为人机界面的PLC控制系统。该设备工作性能稳定、操作方便、经济适用,能够较好地完成异型管的切割。 相似文献
3.
基于ARM7的PLC编程器的设计 总被引:2,自引:1,他引:1
文中在介绍一种新型PLC装置结构的基础上,阐述了一种PLC手持编程器的设计,描述了编程器的各电路模块的设计,以及软件结构。编程器以S3C44B0作为主控制器,以CAN总线作为主要通讯接口,实现远距离监控、编程、调试PLC控制系统,能够脱机编程,能直接与计算机交换数据,有工业应用价值。 相似文献
4.
本文基于动力学原理设计中空塑料型坯形状的设计原理及控制系统.以586微机作为上位机、欧姆龙PLC作为下位机,建立多级控制系统,实现挤出过程型坯形状与壁厚控制.对程序及控制系统进行了较为详细的分析和讨论. 相似文献
5.
为满足工业生产要求和提高企业的生产的效率,设计了一种新型的工业生产线自动化搬运码垛机械手及控制系统。介绍了码垛机械手结构及检测柜平台的设计与安装、机械末端气动控制系统、电力控制系统。提出触摸屏作为上位机,以PLC作为控制器,三位五通换向电磁阀、伺服电机、气缸为驱动设备的电气机械手控制方法,重点讲解了气动回路、控制系统的硬件组成以及PID参数对控制伺服电机影响。最后,对整个电气控制系统回路进行调试和实验。实验数据表明:该电气控制系统设计合理,能够达到企业的生产要求。 相似文献
6.
7.
以田湾核电站1、2号机组一回路水化学取样控制系统PLC控制器国产化改造与可靠性提升为案例,详细介绍了该系统PLC控制器国产化改造选型方案、硬件设计、逻辑控制优化、供电模块冗余设计和改造后应用效果,为在运核电站辅助控制系统进口 PLC控制器国产化改造提供了一定借鉴,具有一定推广价值. 相似文献
8.
9.
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献