CO2 Capture Using CaO Modified with Ethanol/Water Solution during Cyclic Calcination/Carbonation

The calcium‐based sorbent cyclic calcination/carbonation reaction is an effective technique for capturing CO₂ from combustion processes. The CO₂ capture capacity for CaO modified with ethanol/water solution was investigated over long‐term calcination/carbonation cycles. In addition, the SEM micrographs and pore structure for the calcined sorbents were analyzed. The carbonation conversion for CaO modified with ethanol/water solution is greater than that for CaO hydrated with distilled water and is much higher than that for calcined limestone. Modified CaO achieves the highest conversion for carbonation at the range of 650–700 °C. Higher values of ethanol concentration in solution result in higher carbonation conversion for modified CaO, and lead to better anti‐sintering performance. After calcination, the specific surface area and pore volume for modified CaO are higher than those for hydrated CaO, and are much greater than those for calcined limestone. The ethanol molecule enhances H₂O molecule affinity and penetrability to CaO in the hydration reaction so that the pores in CaO modified are obviously expanded after calcination. CaO modified with ethanol/water solution can act as a new and promising type of calcium‐based regenerable CO₂ sorbent for industrial applications.     

CO2 Capture Behavior of Shell during Calcination/Carbonation Cycles

The cyclic carbonation performances of shells as CO₂ sorbents were investigated during multiple calcination/carbonation cycles. The carbonation kinetics of the shell and limestone are similar since they both exhibit a fast kinetically controlled reaction regime and a diffusion controlled reaction regime, but their carbonation rates differ between these two regions. Shell achieves the maximum carbonation conversion for carbonation at 680–700 °C. The mactra veneriformis shell and mussel shell exhibit higher carbonation conversions than limestone after several cycles at the same reaction conditions. The carbonation conversion of scallop shell is slightly higher than that of limestone after a series of cycles. The calcined shell appears more porous than calcined limestone, and possesses more pores > 230 nm, which allow large CO₂ diffusion‐carbonation reaction rates and higher conversion due to the increased surface area of the shell. The pores of the shell that are greater than 230 nm do not sinter significantly. The shell has more sodium ions than limestone, which probably leads to an improvement in the cyclic carbonation performance during the multiple calcination/carbonation cycles.     

Enhancement of Ca‐Based Sorbent Multicyclic Behavior in Ca Looping Process for CO2 Separation

The Ca‐based sorbent looping cycle represents an innovative way of CO₂ capture for power plants. However, the CO₂ capture capacity of the Ca‐based sorbent decays sharply with calcination/carbonation cycle number increasing. In order to improve the CO₂ capture capacity of the sorbent in the Ca looping cycle, limestone was modified with acetic acid solution. The cyclic carbonation behaviors of the modified and original limestones were investigated in a twin fixed‐bed reactor system. The modified limestone possesses better cyclic carbonation kinetics than the original limestone at each cycle. The modified limestone carbonated at 640–660 °C achieves the optimum carbonation conversion. The acetic acid modification improves the long‐term performance of limestone, resulting in directly measured conversion as high as 0.4 after 100 cycles, while the original limestone remains at a conversion of less than 0.1 at the same reaction conditions. Both the pore volume and pore area distributions of the calcines derived from the modified limestone are better than those derived from the original limestone. The CO₂ partial pressure for carbonation has greater effect on conversion of the original limestone than on that of the modified sorbent because of the difference in their pore structure characteristics. The carbonation conversion of the original limestone decreases with the increase in particle size, while the change in particle size of the modified sorbent has no clear effect on cyclic carbonation behavior.     

Application of the random pore model to the carbonation cyclic reaction

Calcium oxide has been proved to be a suitable sorbent for high temperature CO₂ capture processes based on the cyclic carbonation‐calcination reaction. It is important to have reaction rate models that are able to describe the behavior of CaO particles with respect to the carbonation reaction. Fresh calcined lime is known to be a reactive solid toward carbonation, but the average sorbent particle in a CaO‐based CO₂ capture system experiences many carbonation‐calcination cycles and the reactivity changes with the number of cycles. This study applies the random pore model (RPM) to estimate the intrinsic rate parameters for the carbonation reaction and develops a simple model to calculate particle conversion with time as a function of the number of cycles, partial pressure of CO₂, and temperature. This version of the RPM model integrates knowledge obtained in earlier works on intrinsic carbonation rates, critical product layer thickness, and pore structure evolution in highly cycled particles. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Effect of rice husk ash addition on CO2 capture behavior of calcium-based sorbent during calcium looping cycle

Rice husk ash/CaO was proposed as a CO₂ sorbent which was prepared by rice husk ash and CaO hydration together. The CO₂ capture behavior of rice husk ash/CaO sorbent was investigated in a twin fixed bed reactor system, and its apparent morphology, pore structure characteristics and phase variation during cyclic carbonation/calcination reactions were examined by SEM-EDX, N₂ adsorption and XRD, respectively. The optimum preparation conditions for rice husk ash/CaO sorbent are hydration temperature of 75 °C, hydration time of 8 h, and mole ratio of SiO₂ in rice husk ash to CaO of 1.0. The cyclic carbonation performances of rice husk ash/CaO at these preparation conditions were compared with those of hydrated CaO and original CaO. The temperature at 660 °C–710 °C is beneficial to CO₂ absorption of rice husk ash/CaO, and it exhibits higher carbonation conversions than hydrated CaO and original CaO during multiple cycles at the same reaction conditions. Rice husk ash/CaO possesses better anti-sintering behavior than the other sorbents. Rice husk ash exhibits better effect on improving cyclic carbonation conversion of CaO than pure SiO₂ and diatomite. Rice husk ash/CaO maintains higher surface area and more abundant pores after calcination during the multiple cycles; however, the other sorbents show a sharp decay at the same reaction conditions. Ca₂SiO₄ found by XRD detection after calcination of rice husk ash/CaO is possibly a key factor in determining the cyclic CO₂ capture behavior of rice husk ash/CaO.     

Preparation and Application of the Sol-Gel Combustion Synthesis-Made CaO/CaZrO3 Sorbent for Cyclic CO2 Capture Through the Severe Calcination Condition

abstract Calcium looping method has been considered as one of the efficient options to capture CO2 in the combustion flue gas. CaO-based sorbent is the basis for application of calcium looping and shou...     

高温下改性钙基吸附剂固定床反应器从烟气中捕捉二氧化碳(英文)

Four kinds of Ca-based sorbents were prepared by calcination and hydration reactions using different precursors: calcium hydroxide, calcium carbonate, calcium acetate monohydrate and calcium oxide. The CO2 absorption capacity of those sorbents was investigated in a fixed-bed reactor in the temperature range of 350-650℃. It was found that all of those sorbents showed higher capacity for CO2 absorption when the operating temperature higher than 450℃. The CaAc2-CaO sorbent showed the highest CO2 absorption capacity of 299mg·g-1. The morphology of those sorbents was examined by scanning electron microscope (SEM), and the changes of composition before and after carbonation were also determined by X-ray diffraction (XRD). Results indicated that those sorbents have the similar chemical compositions and crystalline phases before carbonation reaction [mainly Ca(OH)2], and CaCO3 is the main component after carbonation reaction. The SEM morphology shows clearly that the sorbent pores were filled with reaction products after carbonation reaction, and became much denser than before. The N2 adsorption-desorption isotherms indicated that the CaAc2-CaO and CaCO3-CaO sorbents have higher specific surface area, larger pore volume and appropriate pore size distribution than that of CaO-CaO and Ca(OH)2-CaO.     

Sulfation rates of cycled CaO particles in the carbonator of a Ca‐looping cycle for postcombustion CO2 capture

Calcium looping is an energy‐efficient CO₂ capture technology that uses CaO as a regenerable sorbent. One of the advantages of Ca‐looping compared with other postcombustion technologies is the possibility of operating with flue gases that have a high SO₂ content. However, experimental information on sulfation reaction rates of cycled particles in the conditions typical of a carbonator reactor is scarce. This work aims to define a semiempirical sulfation reaction model at particle level suitable for such reaction conditions. The pore blocking mechanism typically observed during the sulfation reaction of fresh calcined limestones is not observed in the case of highly cycled sorbents (N > 20) and the low values of sulfation conversion characteristic of the sorbent in the Ca‐looping system. The random pore model is able to predict reasonably well, the CaO conversion to CaSO₄ taking into account the evolution of the pore structure during the calcination/carbonation cycles. The intrinsic reaction parameters derived for chemical and diffusion controlled regimes are in agreement with those found in the literature for sulfation in other systems. © 2011 American Institute of Chemical EngineersAIChE J, 2012     

石灰石和白云石高温循环脱除CO2过程分析

在N2气氛和高浓度CO2气氛两种典型锻烧气氛下,对石灰石和白云石在循环煅烧/碳酸化捕集CO2过程中的主要系统参数包括长周期循环碳酸化转化率、平均碳酸化转化率、CO2捕集效率和煅烧炉能量需求进行了实验研究和计算分析.结果表明,吸收剂补充流率和吸收剂循环流率对平均碳酸化转化率、CO2捕集效率和煅烧炉所需能量具有直接影响.在...     

Modified CaO-based sorbent looping cycle for CO2 mitigation

CaO-based sorbent looping cycle, i.e. cyclic calcination/carbonation, is one of the most interesting technologies for CO₂ capture during coal combustion and gasification processes. In order to improve the durability of limestone during the multiple calcination/carbonation cycles, modified limestone with acetic acid solution was proposed as an CO₂ sorbent. The cyclic carbonation conversions of modified limestone and original one were investigated in a twin fixed bed reactor system. The modified limestone shows the optimum carbonation conversion at the carbonation temperature of 650 °C and achieves a conversion of 0.5 after 20 cycles. The original limestone exhibits the maximum carbonation conversion of 0.15 after 20 cycles. Conversion of the modified limestone decreases slightly as the calcination temperature increases from 920 °C to 1100 °C with the number of cycles, while conversion of the original one displays a sharp decay at the same reaction conditions. The durability of the modified limestone is significantly better than the original one during the multiple cycles because mean grain size of CaO derived from the modified limestone is lower than that from the original one at the same reaction conditions. The calcined modified limestone shows higher surface area and pore volume than the calcined original one with the number of cycles, and pore size distribution of the modified limestone is superior to the original one after the same number of calcinations.     

Cyclic CO2 capture behavior of KMnO4-doped CaO-based sorbent

This study examines the CO₂ capture behavior of KMnO₄-doped CaO-based sorbent during the multiple calcination/carbonation cycles. The cyclic carbonation behavior of CaCO₃ doped with KMnO₄ and the untreated CaCO₃ was investigated. The addition of KMnO₄ improves the cyclic carbonation rate of the sorbent above carbonation time of 257 s at each carbonation cycle. When the mass ratio of KMnO₄/CaCO₃ is about 0.5-0.8 wt.%, the sorbent can achieve an optimum carbonation conversion during the long-term cycles. The carbonation temperature of 660-710 °C is beneficial to cyclic carbonation of KMnO₄-doped CaCO₃. The addition of KMnO₄ improves the long-term performance of CaCO₃, resulting in directly measured conversion as high as 0.35 after 100 cycles, while the untreated CaCO₃ retains conversion less than 0.16 at the same reaction conditions. The addition of KMnO₄ decreases the surface area and pore volume of CaCO₃ after 1 cycle, but it maintains the surface area and pores between 26 nm and 175 nm of the sorbent during the multiple cycles. Calculation reveals that the addition of KMnO₄ improves the CO₂ capture efficiency significantly using a CaCO₃ calcination/carbonation cycle and decreases the amount of the fresh sorbent.     

钙基吸收剂循环吸收CO2技术的研究进展

阐述了对钙基吸收剂循环吸收CO₂技术的研究现状,包括各个可能因素对CaO碳酸化反应的影响,如吸收剂成分、颗粒特性、反应温度、反应时间、CO₂浓度等,并总结了各种CaO吸收CO₂反应动力学模型。同时对钙基吸收剂循环吸收CO₂技术未来的研究方向作了简述。     

Economical assessment of competitive enhanced limestones for CO2 capture cycles in power plants

CO₂ capture systems based on the carbonation/calcination loop have gained rapid interest due to promising carbonator CO₂ capture efficiency, low sorbent cost and no flue gases treatment is required before entering the system. These features together result in a competitively low cost CO₂ capture system. Among the key variables that influence the performance of these systems and their integration with power plants, the carbonation conversion of the sorbent and the heat requirement at calciner are the most relevant. Both variables are mainly influenced by CaO/CO₂ ratio and make-up flow of solids. New sorbents are under development to reduce the decay of their carbonation conversion with cycles. The aim of this study is to assess the competitiveness of new limestones with enhanced sorption behaviour applied to carbonation/calcination cycle integrated with a power plant, compared to raw limestone. The existence of an upper limit for the maximum average capture capacity of CaO has been considered. Above this limit, improving sorbent capture capacity does not lead to the corresponding increase in capture efficiency and, thus, reduction of CO₂ avoided cost is not observed. Simulations calculate the maximum price for enhanced sorbents to achieve a reduction in CO₂ removal cost under different process conditions (solid circulation and make-up flow). The present study may be used as an assessment tool of new sorbents to understand what prices would be competitive compare with raw limestone in the CO₂ looping capture systems.     

Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture

The dolomite modified with acetic acid solution was proposed as a CO₂ sorbent for calcination/carbonation cycles. The carbonation conversions for modified and original dolomites in a twin fixed-bed reactor system with increasing the numbers of cycles were investigated. The carbonation temperature in the range of 630 °C–700 °C is beneficial to the carbonation reaction of modified dolomite. The carbonation conversion for modified dolomite is significantly higher than that for original sorbent at the same reaction conditions with increasing numbers of reaction cycles. The modified dolomite exhibits a carbonation conversion of 0.6 after 20 cycles, while the unmodified sorbent shows a conversion of 0.26 at the same reaction conditions, which is calcined at 920 °C and carbonated at 650 °C. At the high calcination temperature over 920 °C modified dolomite can maintain much higher conversion than unmodified sorbent. The mean grain size of CaO derived from modified dolomite is smaller than that from original sorbent with increasing numbers of reaction cycles. The calcined modified dolomite possesses greater surface area and pore volume than calcined original sorbent during the multiple cycles. The pore volume and pore area distributions for calcined modified dolomite are also superior to those for calcined unmodified sorbent during the looping cycle. The modified dolomite is proved as a new and promising type of regenerable CO₂ sorbent for industrial applications.     

Cl含量对钙基吸收剂微观结构以及动力学性能的影响

通过浸渍法向分析纯CaCO₃中添加Cl,在双固定床反应器系统和热重分析仪上研究了其对钙基吸收剂循环捕集CO₂性能的影响,利用离子反应模型对添加Cl后吸收剂化学反应控制阶段进行动力学分析。结果显示：Cl对钙基吸收剂循环捕集CO₂性能具有不利影响。当Cl/Ca摩尔比大于0.25%后,随Cl/Ca摩尔比增加,化学反应控制阶段反应速率和持续时间均减小,导致在该阶段最终碳酸化转化率降低。对添加Cl前后吸收剂孔隙分布特性进行分析发现,添加Cl导致煅烧后吸收剂烧结加剧,比表面积降低,10~120nm范围内孔分布减少,导致CO₂在吸收剂内部扩散阻力增加,同时能与CO₂反应的CaO量减少,这是导致吸收剂化学反应控制阶段碳酸化反应速度较慢、最终碳酸化转化率较低的主要原因。鉴于Cl的不利影响,在选择钙基材料作为CO₂吸收剂或合成高活性复合吸收剂时,应避免吸收剂中Cl含量过高。     

CaO-Ca9Al6O18吸收剂的碳酸化反应动力学

以柠檬酸钙和硝酸铝为前体,采用湿法混合法制备了CaO质量分数为80%的CaO-Ca₉Al₆O₁₈吸收剂,并对其CO₂吸收性能进行了研究。结果表明,CaO-Ca₉Al₆O₁₈具有优异的CO₂吸收容量和长周期循环使用稳定性,经过50次循环使用后,其转化率仍保持在78%以上,远优于传统的CaO吸收剂。在500～700℃和CO₂分压为0.005～0.015 MPa条件下,研究了CaO-Ca₉Al₆O₁₈吸收剂的碳酸化反应动力学,分别采用离子反应模型和表观模型描述化学反应动力学控制阶段(快反应段)和产物层扩散阶段(慢反应段)。实验测得的吸收剂转化率与模型预测值吻合较好,快慢反应段的活化能分别为25.6、57.7 kJ·mol^-1。该动力学模型可准确模拟CaO-Ca₉Al₆O₁₈吸收剂在长周期循环使用条件下的碳酸化反应。     

Effect of pre-calcination for modified CaO-based sorbents on multiple carbonation/calcination cycles

In the present work,the effect of pre-calcination on carbonation conversion and cyclic stability of modified CaO-based sorbent was investigated by thermogravimetric analyzer (TGA).The modified CaO-based sorbents with CaAc2 as precursor were respectively doped with different elements (Mg,Al,Ce,Zr and La).The specfic surface area,pore volume and pore size distribution were tested by N2 isothermal adsorption measurements.The phase compositions of sorbents were characterized by X-ray diffraction (XRD).The results showed that the cyclic stabilities of the sorbents were improved by pre-calcination.The pre-calcination was conducted at 900 ℃ for 5 h in air by the muffle furnace.With pre-calcination,the cyclic stabilities of sorbents could be as high as 96％after 22 cycles,such as CaO-Al,CaO-Ce and CaO-La.After contact with air,the carbonation conversions of spent sorbents with pre-calcination suddenly increased by about one-sixth due to the change of channel structure by hydration.Both the cyclic stability of sorbent and the durability of reactivation were related to the structural stability of sample,especially the stability of mesopores between 2 nm and 5.5 nm.The present work also provided an easy and low-cost method for reactivating the spent CaO-based sorbents.     

烟气中水蒸气对钙基吸收剂碳酸化的影响特性

在循环煅烧/碳酸化反应系统上考察煅烧气氛和碳酸化气氛中水蒸气含量以及CO₂分压对钙基吸收剂成型颗粒碳酸化的影响,通过对钙基吸收剂微观结构分析(扫描电镜、氮吸附分析)以理解水蒸气影响碳酸化特性的机理。结果表明,煅烧气氛和碳酸化气氛中的水蒸气均可提高钙基吸收剂的碳酸化转化率,水蒸气含量分别为10%和5%时,吸收剂的碳酸化性能较好;水蒸气在碳酸化气氛中对高铝水泥改性吸收剂的改善作用较石灰石显著。煅烧气氛中的CO₂分压越高,烧结现象越严重,降低钙基吸收剂的捕集效率;碳酸化气氛CO₂分压提高,有利于提高钙基吸收剂的碳酸化转化率。烟气中水蒸气丰富了吸收剂的微观孔隙,使得吸收剂捕集CO₂性能得到改善。     

Effect of characteristics of calcium-based sorbents on the sulfation kinetics

The microstructure and pore structure of limestone and shell as desulfurization sorbents during calcination and sulfation were investigated using the scan electron microscope and the porosimeter, respectively. The sulfation process and kinetics were analyzed by thermo-gravimetric method and modified grain reaction model. The results show that the doped alkali metal salts may improve microstructure and product diffusion of sorbent during high temperature sulfation, and enhance the initial reaction rate and the final CaO conversion of sorbents. The kinetic parameters of desulfurization with shells present compensation effect. There are linear relationships between logarithms of the pre-exponential factor ln k₀, ln D₀ and activation energies E_a, E_p, respectively. The activity of sorbent can not be exactly evaluated only by activation energies because of the compensation effect; and the k, D_s under certain experimental conditions can reflect the activity of sorbent. The particle pore diffusion and product layer diffusion control principally the rate of sulfation reaction. The pore size and structure and crystal lattice defects concentration caused by impurities or additives are the main factors to affect the sulfation capability of sorbent. There is an optimum content of alkali metal salts in the sorbent within a certain range of sulfation temperature, which helps sorbent to form a better microstructure and obtain higher reactive activity.