Synthesis and characterization of polyamides and poly(amide-imide)s based on ether-sulfone-diamines

A series of polyamides and poly(amide-imide)s were prepared by the direct polycondensation of 4,4′-[sulfonylbis(1,4-phenyleneoxy)]dianiline or 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenyleneoxy)]dianiline with aromatic dicarboxylic acids and phthalimide unit-bearing dicarboxylic acids in a N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride using triphenyl phosphite and pyridine as condensing agents. The inherent viscosities of the resulting polymers were above 0.45 dL/g and up to 1.70 dL/g. Except for the polyamides derived from terephthalic acid and 4,4′-biphenyldicarboxylic acid, all the other polyamides and all poly(amide-imide)s were readily soluble in polar organic solvents such as NMP, N, N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and m-cresol, and afforded transparent and tough films by solution-casting. Most of the polymers showed distinct glass transition on their differential scanning calorimetry (DSC) traces and their glass transition temperatures (T_g) stayed between 140–264 °C. The methyl-substituted polymers showed higher T_gs than the corresponding unsubstituted counterparts. The results of the thermogravimetry analysis (TGA) revealed that all the methyl-substituted polymers showed lower initial decomposition temperatures than the unsubstituted ones.     

Syntheses and properties of aromatic polyamides derived from 4,4′-oxydibenzoic acid and aromatic diamines

A series of aromatic polyamides were synthesized by direct polycondensation of 4,4-oxydibenzoic acid with various aromatic diamines inN-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride, using triphenyl phosphite and pyridine as condensing agents. The resultant polyamides had inherent viscosities of 0.21-1.48 dL/g. Most of the polymers were organo-soluble and could be solution-cast into flexible and strong films. The glass transition temperatures (T_gs) of most polyamides could be determined with the help of differential scanning calorimetry (DSC) traces, which were recorded in the range of 170–275 °C. Thermogravi metric data of these polymers indicated that most of the polyamides showed no significant weight loss before 450 °C in either air or nitrogen atmospheres.     

Synthesis and characterization of polyimides based on isopropylidene-containing bis(ether anhydride)s

Two bis(ether anhydride)s, 4,4′-[1,4-phenylenebis(isopropylidene-1,4-phenyleneoxy)]-diphthalic anhydride (IV _a) and 4,4′-[isopropylidenebis(1,4-phenylene)dioxy]diphthalic anhydride (IV _b), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 4-nitrophthalonitrile with α,α ′-bis(4-hydroxyphenyl)-1,4-diisopropylbenzene (I _a) and 4,4′-isopropylidenediphenol (I _b) in N,N-dimethylformamide (DMF) in the presence of potassium carbonate. The bis(ether anhydride)s IV _a and IV _b were polymerized with various aromatic diamines to obtain two series of poly(ether amic acid)s VI _a–g and VII _a–g with inherent viscosities in the range of 0.30∼0.74 and 0.29∼1.01 dL/g, respectively. The poly(ether amic acid)s were converted to poly(ether imide)s VIII _a–g and IX _a–g by thermal cyclodehydration. Most of the poly(ether imide)s could afford flexible and tough films, and they showed high solubility in polar solvents such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide, and m-cresol. The obtained poly(ether imide) films had tensile strengths of 45∼83 MPa, elongations-to-break of 6∼27%, and initial modulus of 0.6∼1.7 GPa. The T_gs of poly(ether imide)s VIII _a–g and IX _a–g were in the range of 194∼210 and 204∼243 °C, respectively. Thermogravimetric analysis (TG) showed that 10% weight loss temperatures of all the polymers were above 500 °C in both air and nitrogen atomspheres.     

Synthesis and the properties of novel cycloaliphatic-aromatic polyamides having pendent N,N'-diphenyl imido groups

: We have investigated a novel monomer having two pendent phenyl imido groups for preparing new cycloaliphatic-aromatic polyamides. Novel polyamides were synthesized by direct polycondensation reaction of N,N'-diphenyl-2,3,5,6-diimido cyclohexane-1,4-dicarboxylic acid(PICA) and various aromatic diamines such as p-phenylene diamine, 4,4'-oxydianiline and 4,4'-methylene dianiline. A direct polycondensation was carried out by a Yamazaki method which is typical of using triphenyl phosphite, lithium chloride, and pyridine. Inherent viscosity of these resulting polyamides are ranged 0.20 ∼ 0.45 dl/g. A transparent flexible and tough film was casted. The glass transition temperature of the polyamide from the PICA and 4,4'-oxydianiline is 147 °C. The decomposition temperature of these polyamides are ranged from 350 ∼ 360 °C and the ash contents of them orders MDA > p-PDA > ODA according to kinds of the using diamines. And the solubilities of these polyamides are good in aprotic solvents such as DMAc, NMP, DMF. Received: 26 July 1999/Revised version: 14 September 1999/Accepted: 28 September 1999     

Synthesis and characterization of novel polyamides derived from 1,4-bis((4-amino-2-(trifluoromethyl)phenoxy)methyl)cyclohexane and aromatic dicarboxylic acids

A new aromatic diamine with a trifluoromethyl pendent group, 1,4-bis((4-amino-2-(trifluoromethyl)phenoxy)methyl)cyclohexane, was successfully synthesized in two steps from 1,4-cyclohexanedimethanol and 2-chloro-5-nitrobenzotrifluoride as starting materials. And the newly obtained diamine with various aromatic dicarboxylic acids, including isophthalic acid (IPA), 2,2-bis(4-carboxy-phenyl)hexafluoropropane (6FA) and 4,4′-oxydibenzoic acid (OBA), were polymerized, respectively via the usual Yamazaki reaction to prepare a series of fluorinated polyamides. The resulting polymers had inherent viscosities ranging from 1.85 to 2.36 dL/g. All the polymers showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents [e.g., N-methyl-2-pyrrolidone (NMP), DMAc, and DMF] and even dissolved in less polar solvents (e.g., pyridine, and tetrahydrofuran). These polymers could also be easily be cast into transparent, tough and flexible films with tensile strengths of 76.5–82.3 MPa, Young’s moduli of 1.64–1.85 GPa, and elongations at break of 10–12%. In addition, these polyamides films exhibited low dielectric constants of 2.37–2.53 at 100 MHz, low water absorptions in the range of 1.54–2.13%, and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 326–333 nm range. Furthermore these polyamides still retained good thermal stability. These combined outstanding features make these obtained polyamides competitive for advanced microelectronic applications.     

Preparation and properties of aramids based on naphthalenedicarboxylic acid and their molecular composites with amorphous nylon

Two naphthalene-aromatic polyamides were prepared from 2,6-naphthalenedicarboxylic acid and various aromatic diamines by a modified Higashi phosphorylation reaction. The first polymer, poly(4,4′-diaminobenzanilide-2,6-naphthalamide)^** (DBNA), was synthesized by the reaction of 2,6-naphthalenedicarboxylic acid with 4,4′-diaminobenzanilide. The second polymer, 50/50 copoly(1,4-phenylene/1,4-bis(4′-phenoxy)benzene-2,6-naphthalamide)^*** (PBNA), is a copolymer synthesized using an equimolar ratio of 1,4-phenylene diamine and 1,4-bis(4′-aminophenoxy)benzene. These two polymers have inherent viscosities of 4.17 and 2.32 dL g^-1, respectively, and dissolve in N-methyl-2-pyrrolidone (NMP)containing LiCl. Highstrength films were obtained by casting from these polymer solutions. Blends of DBNA/amorphous nylon and of PBNA/amorphous nylon were prepared by rapidly precipitating the ternary NMP solution into deionized water, and hot-pressing to films at 185°C. The compatibility, morphology, and mechanical properties were investigated by dynamic mechanical analysis (DMA), scanning electron microscopy (SEM), and tensile tests. The results revealed that both DBNA and PBNA were partially compatible with amorphous nylon. DBNA formed microfibrils in the amorphous nylon matrix, and its mechanical properties, tensile strength and modulus, improved with increasing DBNA content. PBNA had no reinforcing effect, perhaps because it did not form microfibrils in the amorphous nylon matrix.     

Synthesis and properties of poly(amide-imide)s based on 1,5-bis(4-trimellitimido)naphthalene

1,5-Bis(4-trimellitimido)naphthalene (II) was prepared by the condensation reaction of 1,5-naphthalenediamine and trimellitic anhydride. A series of aromatic poly(amide-imide)s (IV _a–o) was synthesized by the direct polycondensation of the diimide-diacid (II) and various aromatic diamines (III _a–o). The reaction utilized triphenyl phosphite and pyridine as condensing agents in the presence of calcium chloride in N-methyl-2-pyrrolidone (NMP). The inherent viscosities of the resulting poly(amide-imide)s were in the range of 0.55∼1.39 dL/g. These polymers were generally soluble in polar solvents, such as N,N-dimethylacetamide (DMAc), NMP, N,N-dimethylformamide (DMF). Flexible and tough poly(amide-imide) films were obtained by casting from a DMAc solution and had tensile strengths of 90∼145 MPa, elongations to break of 5∼13 %, and initial moduli of 2.29∼3.73 GPa. The glass transition temperatures of some poly(amide-imide)s were recorded in the range of 206∼218 °C, and most of the polymers did not show discernible glass transition on their DSC traces. The 10% weight loss temperatures were above 522 °C in nitrogen and above 474 °C in air atmosphere.     

Preparation and properties of poly(amideether-imide)s derived from 1,4-bis(4-aminophenoxy)benzene,trimellitic anhydride,and various aromatic diamines

An imide ring containing dicarboxylic acid, 1,4-bis(4-trimellitimidophenoxy)benzene (III), was prepared by the condensation of 1,4-bis(4-aminophenoxy)benzene and trimellitic anhydride. A series of new poly(amide-ether-imide)s were prepared by the direct polycondensation of diimide-diacid III with various aromatic diamines using triphenyl phosphite and pyridine as condensing agents inN-methyl-2-pyrrolidone (NMP) in the presence of calcium chloride. The highest inherent viscosity value of a poly(amide-ether-imide) obtained was 1.78 dL/g (inN,N-dimethylacetamide, DMAc, at 30 °C). Flexible films with excellent tensile properties were cast from DMAc solutions. Glass transition temperatures of these poly(amide-ether-imide)s were recorded in the range of 248–297 C. These polymers do not show obvious weight loss before 400°C; the decomposition temperatures at which 10% weight loss in nitrogen and in air were observed for these poly(amide-ether-imide)s in the range of 521–564°C and 501–539°C, respectively. The polymers derived fromp-phenylenediamine or the diamines containing 1,4-bisphenoxy units exhibited a higher degree of crystallinity and higher initial decomposition temperatures but poor solubility in organic solvents.     

Synthesis of Organosoluble and Optically Active Poly(ester-imide)s by Direct Polycondensation with Tosyl Chloride in Pyridine and Dimethylformamide

Summary 4,4′-Oxydiphthalic anhydride (1) was reacted with L-methionine (2) in acetic acid and the resulting N,N′-(4,4′-oxydiphthaloyl)-bis-L-methionine diacid (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4-dihydroxyanthraquinone (5c), 4,4′-dihydroxydiphenyl sulfide (5d), 2,6-dihydroxytoluene (5e), 4,4′-dihydroxydiphenyl sulfone (5f) and 2,4′-dihydroxyacetophenone (5g) was carried out in a system of tosyl chloride (TsCl), pyridine (Py) and N,N-dimethylformamide (DMF). The reactions with TsCl were significantly promoted by controlling alcoholysis with diols in the presence of the catalytic amounts of DMF to give a series of optically active poly(ester-imide)s (PEI)s with good yield and moderate inherent viscosity ranging 0.21–0.71 dL/g. The polycondensation reactions were significantly affected by the amounts of DMF, molar concentration of monomers, TsCl and pyridine, aging time, addition time of diols, temperature and the reaction time. All of the above polymers were fully characterized by ¹H-NMR, FT-IR, elemental analysis and specific rotation. Some structural characterization and physical properties of these new optically active PEIs are reported.     

Preparation and properties of new polycyclic aliphatic polyamides base on diamantane

A series of novel polycyclic aliphatic polyamides was synthesized by direct polycondensation of the 1,6-diamantane dicarboxylic acid with various alicyclic diamines in N-methyl–2–pyrrolidone (NMP) containing lithium chloride, using triphenyl phosphite and pyridine as a condensing agent. The polyamides had inherent viscosities of 0.33–0.49 dL/g. The glass transition temperatures of the these polyamides were in the range of 200–220°C, and the 5% weight loss temperatures were in the range were 290–319°C in nitrogen. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of polyamides and copolyamides based on 2,6-naphthalene dicarboxylic acid

A number of polyamides based on 2,6-naphthalene dicarboxylic acid (NDA) and various aromatic diamines were synthesized in N-methyl pyrrolidone (NMP) containing lithium chloride (LiCl) or calcium chloride (CaCl₂) by direct polycondensation using triphenyl phosphite and pyridine. The best reaction conditions for polycondensation were determined in terms of factors such as the amount of the solvency-promoting reagent such as LiCl or CaCl₂ and the initial reactant concentration. Thus, almost all polyamides were obtained with inherent viscosities above 1.0 and up to 3.28 dL/g. Similarly, high molecular weight copolyamides with inherent viscosities of 1.76–3.61 dL/g were prepared from 4,4′-oxydianiline (ODA) and mixed dicarboxylic acids of NDA/terephthalic acid (TPA) or NDA/isophthalic acid (IPA). The solubility of NDA homopolyamides depended on the diamine components. The polyamides derived from meta-, sulfone-, or alkylene-linked diamine showed increased solubility. Copolymerization of ODA with NDA/IPA led to a significant increase in solubility, whereas with NDA/TPA, it gave a limited improvement. All the homopolyamides and copolyamides showed an amorphous X-ray diffraction pattern. Almost all the polymers soluble in aprotic solvents can be solution-cast into strong and tough films. Glass transition shifts of some NDA polyamides can be observed in the differential scanning calorimetry (DSC) curves ranging from 243 to 345°C. Most NDA/IPA–ODA copolyamides also showed clear transitions in the range of 255–268°C. In nitrogen, all the polymers showed no significant weight loss up to 400°C, and their 10% weight loss temperatures were recorded in the range of 434–541°C. © 1994 John Wiley & Sons, Inc.     

Synthesis and Properties of Novel Fluorinated Poly(amide-imide)s from the 4,4′-Bis(4-trimellitimido-2-trifluoromethylphenoxy)biphenyl and Aromatic Diamines

A novel fluorinated diimide dicarboxylic acid, 4,4′-bis(4-trimellitimido-2-trifluoromethylphenoxy)biphenyl (III), was synthesized from the condensation of 4,4′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (I) and trimellititc anhydride. A series of soluble poly(amide-imide)s (PAI) V_a–h having inherent viscosities of 0.56–0.97 dL/g were prepared from reacting III with an equivalent amount of diamines by direct polycondensation using triphenyl phosphite and pyridine as condensing agents. The polymer V series afforded tough, transparent, and flexible films. They had tensile strengths ranging from 88 to 112 MPa, elongations at break from 8 to 31%, and initial moduli from 1.9 to 2.7 GPa. The glass-transition temperature (T_g) of the polymers was recorded at 235–300^○C. They had 10% weight loss at a temperature above 502^○C and left more than 54% residue even at 800^○C in nitrogen. In comparison with the nonfluorinated PAI VI series, the fluorinated V exhibited better solubility.     

Synthesis and properties of fluorinated polyamideimides with high solubility

A series of fluorinated polyamideimides (PAIs) were synthesized by the direct polycondensation of a novel diimide‐diacid, 1,4‐bis(trimellitimido‐2‐trifluoromethylphenoxy) benzene (BTTFB), with aromatic diamines by using triphenyl phosphite (TPP) and pyridine as condensation agents in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP) and CaCl₂. Most of the resulting polymers showed an amorphous nature. All the fluorinated PAIs were readily soluble in a variety of organic solvents such as NMP, N,N‐dimethyl acetamide, dimethylformamide, and dimethyl sulfoxide and could even be dissolved in less polar solvents such as THF and m‐cresol. The PAIs had inherent viscosities of 0.77–0.93 dL/g, depending on the diamines. All the soluble PAIs afforded transparent, flexible, and tough films that exhibited excellent thermal stability, good mechanical properties, and low moisture absorption. The glass transition temperatures of these PAIs ranged from 244 to 272°C and the 5% weight loss temperatures were >525°C in nitrogen. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 321–327, 2005     

Study on synthesis of novel soluble aromatic polyamides with pendant cyano groups

A series of novel soluble aromatic polyamides with pendant cyano groups were synthesized by low temperature polycondensation of aromatic diamines with a new monomer 2,6-bis(4-chloroformylphenoxy)benzonitrile (ClPOBN) in the presence of N,N-dimethylacetamide (DMAC) as the solvent and tertiary amines as the absorbent of HCl. The properties and structures of obtained polymers were characterized by means of FTIR, TG, and elemental analysis. Structures of prepared polymers are as expected. TG studies show that the polymers had excellent thermal stability as measured by 5% weight loss temperatures in nitrogen (409–438 °C).They are soluble in aprotic polar organic solvents such as N-methyl pyrrolidone (NMP), dimethyl sulphoxide (DMSO) and N,N-dimethylformamides (DMF) and are swelled in common solvents, such as CHCl_3, ethylene dichloride (DCE), CH₂Cl₂, tetrahydrofuran (THF), etc. Their thin films which cast from DMF had tensile strength of 79–93 MPa, Young’s moduli of 1.7–2.6 GP, elongation at break of 9–15%, indicating they are strong in mechanical properties.     

Synthesis and properties of fluorinated aromatic poly(amide imide)s based on 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone and various bis(trimellitimide)s

A CF₃‐containing diamine, 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone ( 2 ), was synthesized from 4,4′‐dihydroxybenzophenone and 2‐chloro‐5‐nitrobenzotrifluoride. Imide‐containing diacids ( 3 and 5B_a – 5B_g ) were prepared by the condensation reaction of aromatic diamines and trimellitic anhydride. Then, two series of novel soluble aromatic poly(amide imide)s (PAIs; 6A_a – 6A_k and 6B_a – 6B_g ) were synthesized from a diamine ( 4A_a – 4A_k or 2 ) with the imide‐containing diacids ( 3 and 5B_a – 5B_g ) via direct polycondensation with triphenyl phosphate and pyridine. The aromatic PAIs had inherent viscosities of 0.74–1.76 dL/g. All of the synthesized polymers showed excellent solubility in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide (DMAc), and afforded transparent and tough films by DMAc solvent casting. These polymer films had tensile strengths of 90–113 MPa, elongations at break of 8–15%, and initial moduli of 2.0–2.9 GPa. The glass‐transition temperatures of the aromatic PAIs were in the range 242–279°C. They had 10% weight losses at temperatures above 500°C and showed excellent thermal stabilities. The 6B series exhibited less coloring and showed lower yellowness index values than the corresponding 6A series. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3641–3653, 2006     

Organosoluble and Light-colored Fluorinated Polyimides from 2,2-Bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]sulfone and Aromatic Dianhydrides

A new trifluoromethyl-substituted diamine monomer, 2,2-bis[4-(4-amino-2-trifluoromethylpenoxy)phenyl]sulfone (II), was prepared through the nucleophilic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 4,4’-sulfonyl diphenol in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Novel fluorinated polyimides V_a–f having inherent viscosities ranging from 0.74 to 1.14 dL/g were synthesized from the diamine II with various aromatic dianhydrides via thermal imidization of poly(amic acid). Most of V series were soluble in the all test solvents, except V_b(H). These polyimide films had strengths at yield of 94–119 MPa, tensile strengths of 90–118 MPa, elongations to break of 10–16%, and initial moduli of 2.0–2.4 GPa. The glass transition temperature (T_g) of these polymers were in the range of 244–297 ^○C, their 10% weight loss temperatures were above 520 ^○C under ether nitrogen or air atmosphere, and left more than 45 wt% residue even at 800 ^○C in nitrogen. Compared with polyimides VII based on 4,4’-bis(3-aminophenoxy)diphenyl sulfone (II’), V showed better solubility and lower color intensity, dielectric constant, and moisture absorption. Their films had cutoff wavelengths between 355–402 nm, b^* values ranging from 6.8 to 32.9, dielectric constants of 3.32–4.27 (1 MHz), and moisture absorptions in the range of 0.27–0.62 wt%.     

Synthesis and properties of organosoluble poly(ether imide)s containing 4,4′(octahydro-4,7-methano-5H-inden-5-ylidene) cardo group

A series of organosoluble aromatic poly(ether imide)s (PEIs) VIIa-k were synthesized from 4,4′-[(octahydro-4,7-methano-5H-inden-5-ylidene)bis(1,4-phenylene)dioxy] diphthalic dianhydride (IV) and various aromatic diamines. PEIs synthesized through two-stage polymerization had inherent viscosities of 0.51–0.64 dL/g. This series of polymers could also be synthesized from IV and diamines in a small amount of refluxing m-cresol in a one-step process and had inherent viscosities of 0.65–0.87 dL/g. For the low melting point diamines (Vj and Vk), polymers could be obtained by bulk polymerization and had inherent viscosities of 0.36 and 0.41 dL/g. Polymers showed good organosolubility and could be cast into transparent, flexible, and tough polyimide films with good tensile properties. These PEIs had glass transition temperatures among 203–281°C. Thermogravimetric analyses established that these polymers were fairly stable up to 430°C, and the 10% weight loss temperatures were recorded in the range of 473–503°C in nitrogen and 481–512°C in air atmosphere. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 987–996, 1999     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Electrical conductivity of polyblends of poly(1,4-phenylene vinylene) and poly(2,5-dimethoxy-1,4-phenylene vinylene)

Summary A series of polyblends of poly(1,4-phenylene vinylene), PPV, and poly(2,5-dimethoxy-1,4-phenylene vinylene), PDMPV, were prepared in film form from precursor polyblends of the respective sulfonium salt polymers, which were separately prepared from the respectivebis(sulfonium salt) monomers. The blend films were doped with I₂ at room temperature to obtain a wide range of electrical conductivities (10^–2 to 10²Scm^–1) depending on the blend composition. The higher the content of PDMPV in the blends the higher was the conductivity.     

Synthesis and characterization of aromatic polyamides derived from various derivatives of 4,4’-oxydianiline

Three aromatic diamines, 2,2′-diiodo-4,4′-oxydianiline (DI-ODA 2), 2,2′-bis[p-(trifluoromethyl)phenyl]-4,4′-oxydianiline (BTFP-ODA 3) and 2,8-diaminodibenzofuran (DADBF 5) were synthesized by using 4,4-oxydianiline (4,4′-ODA) as the starting material. New aromatic polyamides 6, 7 and 8 were prepared from these three diamines and six commercially available aromatic diacids by direct polycondensation, respectively. Polyamides 6 and 7 contained bulky iodide and p-trifluoromethylphenyl substitutents that would hinder the chain packing and increase the free volume. They exhibited good optical transparency in visible light region and showed excellent solubility in organic solvents such as DMSO, DMAc, DMF and NMP. Polyamides 8 containing planar dibenzofuran moieties had the highest glass transition temperatures and decomposition temperatures among these polyamides. Polyamides 6 had the lowest decomposition temperatures due to the presence of weak carbon–iodine bond. All of these polyamides showed amorphous nature evidenced by wide angle X-ray diffraction. No endothermic peaks were observed from DSC thermograms up to their decomposition temperatures. High optical transparency and excellent solubility combined with good thermal stability make these polyamides attractive for potential soft electronics applications.