Single‐step ultrasonic synthesis of biodiesel from crude Jatropha curcas oil

A novel single‐step process with chlorosulfonic acid catalyst for ultrasonic biodiesel synthesis using feedstock with high free fatty acid content is investigated.Jatropha curcas oil has been used as the model feedstock with methanol as alcohol. The distinct merit of chlorosulfonic acid is that it catalyzes both esterification and transesterification reactions. Moreover, chlorosulfonic acid also counteracts inhibition caused by water formed during esterification, which is the cause for very slow kinetics of acid catalyzed transesterification. In addition, sonication of the reaction mixture also causes strong micromixing and emulsification that enhances the transesterification kinetics. Statistical optimization of the process shows 93% yield for 8.5 wt % catalyst, 20:1 alcohol to oil molar ratio and temperature of 333 K. Peculiar feature of this process is that high yield is seen at moderate temperature and molar ratio, which are much smaller than that for conventional sulfuric acid catalyzed processes. The activation energy for the process (57 kJ/mol) is at least 3× lower than the energy for sulfuric acid catalyzed transesterification. The thermodynamic analysis reveals that the net Gibbs energy change for the single‐step process is almost same as that for sulfuric acid catalyzed process. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1572–1581, 2014     

新型换热表面硫酸腐蚀特性的数值预测

低温腐蚀是造成换热设备失效并降低其经济性的重要原因。基于汽液平衡理论和多组分扩散影响数值模拟了不同换热管管壁表面及翅片表面酸露点温度和酸蒸气、水蒸气冷凝沉积速率等影响低温腐蚀的相关因素,数值预测了换热表面局部酸露点温度,为换热器精细设计提供指导。结果表明,燃料类型、飞灰颗粒和翅片结构均会对换热表面酸露点温度造成不同程度影响。燃料类型决定烟气成分和燃烧温度,对酸露点温度影响较大;烟气中飞灰颗粒的存在会降低酸露点温度;翅片结构能够改变周围烟气速度,影响酸露点温度和壁面上酸蒸气、水蒸气冷凝沉积速率。基于以上数值研究提出丁胞和矩形纵向涡复合H型翅片结构可降低壁面上烟气酸露点温度,降低酸蒸气、水蒸气冷凝沉积速率。     

硫酸与硝酸的异同点探讨

硫酸和硝酸都具备酸的通性,在化学反应中能够和碱以及碱性氧化物反应生成相应的水和盐,硫酸和硝酸都具有较强的氧化性,在化学工业中发挥着重要的作用。对硫酸和硝酸进行了相应的介绍,从多方面探讨了硫酸和硝酸的异同点,从而更好将硫酸和硝酸应用于化工行业中。     

Improving the barrier character of polylactide/phenoxy immiscible blend using poly(lactide‐co‐ɛ‐caprolactone) block copolymer as a compatibilizer

The improvement of the barrier character of polylactide by the addition of poly(hydroxy ether) of bisphenol A (Phenoxy) and poly(lactide‐co ‐?‐caprolactone) copolymer that acts as a compatibilizer is studied. First, differential scanning calorimetry, Fourier transformed infrared spectroscopy, and scanning electron microscopy show that the addition of the copolymer allows to obtain a miscible ternary system. The permeability of polylactide to water vapor, oxygen, and carbon dioxide is enhanced with the addition of phenoxy but better improvement in its barrier character is obtained with the addition of the compatibilizer. The effects of different factors such as miscibility, glass transition temperature, and crystallinity on the transport properties are analyzed. Several permeability prediction models for heterogeneous systems have been applied obtaining quite good results for water vapor and oxygen permeability. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45396.     

Transport Properties of Modified Montmorillonite‐Poly(ε‐caprolactone) Nanocomposites

A series of montmorillonite‐poly(ε‐caprolactone) nanocomposites were prepared according to a two‐stage procedure. In the first step Na‐type silicate clay was cation exchanged with protonated 12‐aminolauric acid. In the second step ε‐caprolactone was intercalated in the modified clay and ring‐opening polymerized. The clay content was varied regularly from 0 to 44 wt.‐%, with exfoliation of the silicate layers being detected by X‐ray diffraction in the nanocomposites dispersing up to at least 16 wt.‐% clay. Crystallization of poly(ε‐caprolactone) was not prevented in the nanocomposites, although it proceeded to a lower extent/order than in a homopolymer sample. The transport properties were investigated using water or dichloromethane as vapor permeants. In each case, a dual sorption behavior was observed as a function of the vapor activity because of the occurrence of different sorption mechanisms. The permeability of the nanocomposites to either permeant decreased with increasing clay content. In particular, the permeability behavior to water was largely dominated by the diffusion parameter.     

High Pressure Raman Spectroscopic Study of the Effects of n‐Ethylamines and Water on the 2‐Nitropropane/Nitric Acid System

High pressure Raman spectroscopy measurements in a diamond anvil cell (0–10 GPa) on 2‐nitropropane/nitric acid/X (X=triethylamine, diethylamine, and water) ternary systems and 2‐nitropropane/nitric acid/water/Y (Y=triethylamine and diethylamine) quaternary systems are reported. The modifications of the chemical behavior of the 2‐nitropropane/nitric acid model system, induced by the presence of triethylamine, diethylamine, and/or water, were studied at ambient and high pressure. At ambient pressure, the ionization of the nitric acid has been observed with each of the additives. Moreover, in the case of ethylamines, new peaks have been observed and the hypothesis of a 2‐nitropropane/ethylamine complex is advanced. At high pressure, the decomposition of the 2‐nitropropane/nitric acid system, with an oxygen balance near zero, has been observed only in presence of triethylamine. The role of each additive to the 2‐nitropropane/nitric acid system in the modification of the respective reducing and oxidizing character of the components, and in the reactivity of the system, is discussed. Several hypotheses are advanced concerning the sensitizing effect of the additives on the 2‐nitropropane/nitric acid system.     

Role of poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) in the modification of polysulfone membranes for ultrafiltration

In this study polysulfone membranes with antifouling and hydrophilic properties were synthesized using poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (AMPS) as an additive for the first time. Different wt % of AMPS was used to prepare polysulfone membranes by phase inversion method. The role of AMPS on the porosity, pore size distribution, hydrophilicity, and antifouling nature was investigated and analyzed in detail. Characterization techniques like field emission scanning electron microscope, atomic force microscopy, and imageJ software were used to characterize the morphology of prepared membranes. There is positive effect of the additive addition on all the membrane parameters like Pure water flux [101.76 L/(m² h)] (MR0) to 464.06 L/(m² h) (MR4)], hydraulic permeability [0.65 (MR0) to 2.01 (MR4)], equilibrium water content [21.74 (MR0) to 71.45 (MR4)], and porosity [0.024 (MR0) to 0.58 (MR4)]. Response surface methodology was used for the optimization of bovine serum albumin (BSA) flux and rejection. The results of the morphological as well as permeation studies depicted that permeate flux and antifouling nature were increased with the amount of AMPS present in the membrane matrix. The antifouling study of the prepared membranes was undertaken by using BSA solution of 1000 mg/L. Positive results were seen with the increase in amount of AMPS, since, the total membrane resistance has been decreased from 0.95 (MR0) to 0.74 (MR4). Separation of humic acid from aqueous medium was also performed with the best performing membrane (MR4, having the highest amount of AMPS). Separation efficiency of 100% and 94% were obtained using 10 mg/L and 50 mg/L of HA, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45290.     

Characteristics of cellulose isolated by a totally chlorine‐free method from Caragana korshinskii

The chemical composition and fiber morphology of Caragana korshinskii were investigated in this study. Isolation of cellulose was performed in a nonsulfur acetic acid/nitric acid system under various conditions. The influence of three factors, i.e., nitric acid concentration (0, 2, 4, 6, 8, or 10%), temperature (95, 100, 110, 115, 120, or 130°C), and reaction time (30, 40, 50, 60, or 90 min) on the cellulose properties (viscosity, yield, and molecular weight) was studied. The cellulose isolated was characterized by using Fourier transform infrared, gas chromatography, high performance liquid chromatography, solid‐state cross‐polarization magic angle spinning carbon‐13 nuclear magnetic resonance, wide‐angle X‐ray diffraction, and thermogravimetric analysis/differential scanning calorimetry techniques. The results showed that the treatment using 80% acetic acid and nitric acid as a catalyst under the given conditions resulted in slight acetylation of the cellulose and increased the degree of crystallinity of cellulose except for significant degradation of lignin and hemicellulosic polymers. The thermal stability of the cellulose declined with an increase in nitric acid concentration. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3251–3263, 2006     

Dehydration of light oil by pervaporation using poly(vinyl alcohol)–poly(acrylic acid‐co‐maleic acid) membranes

A new blended membrane was prepared and tested by pervaporation of light oil, a mixture of five alcohols plus water. The blended membrane was synthesized by blending poly(vinyl alcohol) and poly(acrylic acid‐co‐maleic acid) sodium salt in the presence of sulfuric acid to dope the reaction. We tested several membranes in order to choose the adequate composition to have the best permselectivity. The PVA(60)–PAA‐co‐maleic acid(40) membrane was selected as it was found to be highly selective. Sorption experiments were performed using binary and ternary water–alcohol solutions. The influence of temperature and feed composition on the selectivity and flux in pervaporation was investigated for two different binary mixtures (water/ethanol, water/isobutanol) and one ternary system (water/ethanol/isobutanol). This membrane presents good permselective properties, high water flux, and good selectivity and can even be used for high‐water activities The performances of this new membrane were compared to those obtained with the PVA(90)–PAA(10) membrane synthesized recently: The fluxes observed for the water–ethanol separation were of the same order of magnitude but the selectivity was found to be much higher. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1709–1716, 2002     

Electrolytic oxidation of Ce(III) in nitric acid and sulfuric acid media using a flow type cell

The electrochemical oxidation behavior of Ce(III) in nitric acid and sulfuric acid media with various concentrations and compositions were investigated by cyclic voltammetry (CV) and potentiostatic electrolysis. In nitric acid media, the peak potential separation for the redox reactions of the Ce(III)/Ce(IV) couple shifted to base side with the increasing concentration of nitric acid from 1 to 6 M. The kinetics of the Ce(III)/Ce(IV) couple is rapid in high concentration nitric acid. The formal potential is independent of both proton and nitrate concentrations while the standard rate constant increases with added protons but is independent of nitrate concentration. Constant-potential electrolysis also shows that a high proton concentration is electrochemically favorable for the electron transfer of the Ce(III)/Ce(IV) couple and for a high Ce(IV) yield in nitric acid media. The current efficiency was ca. 75% for the oxidation process of Ce(III) at 298 K. A Ce(IV) yield of ca. 80% was achieved for the electrolysis of 100 mM Ce(III) in 6 M HNO₃ solution. In sulfuric acid media, the peak potential separation for the redox reactions of the Ce(III)/Ce(IV) couple shifted to noble side with rising concentration of sulfuric acid from 0.1 to 2 M and then shifted to base side with further increase in the concentration. A Ce(IV) yield of ca. 95% was achieved for the potentiostatic electrolysis of 100 mM Ce(III) in 3 M H₂SO₄ solution.     

Preparation and characterization of nano‐SiO2 reinforced alginate‐based nanocomposite films (II)

Crosslinked alginate‐based nanocomposites at different SiO₂ contents were prepared successfully by blending the nano‐SiO₂ solution into low concentration alginate solution (0.5 wt %), with the alginate concentration increased step by step to the resulted concentration, in this course glycerol was used as plasticizer and 5 wt % CaCl₂ as crosslinker. The combined effect of SiO₂ content (1.5–8 wt %) on the microstructural, physical, mechanical, and optical properties of the nanocomposite films were investigated. The results showed that tensile strength and elongation was improved by about 40.33% and 89%, respectively, upon increasing the SiO₂ content to 4.5 wt %. In addition, water vapor permeability and swelling degree decreased by 19% and 16% with increasing SiO₂ content up to 8 and 4.5 wt %, respectively with respect to pure crosslinked alginate film. Thermogravimetric analysis also revealed that nano‐SiO₂ can improve the thermal stability of sodium alginate films produced by this method. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45286.     

A concise synthesis of single‐enantiomer β‐lactams and β‐amino acids using Rhodococcus globerulus

BACKGROUND: Pharmaceutical companies continue to evaluate β‐amino acids and β‐lactams in a range of drug candidates. The development of a highly efficient and selective bioresolution of cyclic β‐lactam substrates could yield enantiopure lactams and β‐amino acids with medicinal potential. The aim of this work was to discover and develop a biocatalyst capable of selectively hydrolysing β‐lactam substrates. RESULTS: Screening of our in‐house culture collection led to the discovery of a microorganism, Rhodococcus globerulus (NCIMB 41042) with β‐lactamase activity. Whole‐cell bioresolutions of the β‐lactams 1–4 were successfully carried out and in all cases enantiomeric excesses of the residual lactam and amino acid product were found to be greater than 98%. For one example, the bioresolution was optimised to operate at 60 g L^?1 substrate concentration with a 20% wt/wt cell paste loading. CONCLUSION: A microorganism, Rhodococcus globerulus (NCIMB 41042), capable of selectively hydrolysing a range of cyclic β‐lactams, has been discovered. A scalable whole‐cell bioresolution process has been developed, leading to the synthesis of multigram quantities of enantiomerically pure β‐lactams and β‐amino acids. Copyright © 2007 Society of Chemical Industry     

High‐strength regenerated cellulose fibers spun from 1‐butyl‐3‐methylimidazolium chloride solutions

High‐performance regenerated cellulose fibers were prepared from cellulose/1‐butyl‐3‐methylimidazolium chloride (BMIMCl) solutions via dry‐jet wet spinning. The spinnability of the solution was initially evaluated using the maximum winding speed of the solution spinning line under various ambient temperatures and relative humidities in the air gap. The subsequent spinning trials were conducted under various air gap conditions in a water coagulation bath. It was found that low temperature and low relative humidity in the air gap were important to obtain fibers with high tensile strength at a high draw ratio. From a 10 wt % cellulose/BMIMCl solution, regenerated fibers with tensile strength up to 886 MPa were prepared below 22 °C and relative humidity of 50%. High strengthening was also strongly linked with the fixation effect on fibers during washing and drying processes. Furthermore, an effective attempt to prepare higher performance fibers was conducted from a higher polymer concentration solution using a high molecular weight dissolving pulp. Eventually, fibers with a tensile strength of ～1 GPa and Young's modulus over 35 GPa were prepared. These tensile properties were ranked at the highest level for regenerated cellulose fibers prepared by an ionic liquid–based process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45551.     

Morphological and structural formation of the regenerated cellulose membranes recovered from its cuprammonium solution using aqueous sulfuric acid

Morphological and structural formation of the regenerated cellulose membranes from its cuprammonium hydroxide solution by acid coagulation was investigated. Scanning electron microscopic observation revealed that the morphology of the membranes changed drastically as functions of both the cellulose concentration in the original cellulose solution C_Cell and the concentration of sulfuric acid as a coagulant C_H2SO4. It was found that at a constant polymer concentration (8 wt %) the membrane prepared by using 5 wt % aqueous sulfuric acid exhibits higher water flux, far smaller swelling anisotropy parameter L_t, and larger porosity P_r with a thinner skin structure, and these parameters were proven to be associated with lower (11 0) crystal plane orientation coefficient f_{∥(11 0)} compared with those for the membranes obtained by aqueous sulfuric acid with more than 10 wt %. On the other hand, at constant coagulant concentration (10 wt %) the membrane prepared by using the polymer solution with 5 wt % shows far greater P_r with practically no distinct skin structure; hence, a higher flux. The drastic changes in the morphology and structural parameters as functions of C_Cell and C_H2SO4 were found to be well correlated with abrupt changes in material transportation (copper ion, ammonium ion, and water) from the polymer solution to aqueous coagulants as a function of C_Cell and C_H2SO4. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1669–1678, 1999     

RAFT‐mediated graft polymerization of glycidyl methacrylate in emulsion from polyethylene/polypropylene initiated with γ‐radiation

The successful reversible addition‐fragmentation (RAFT)‐mediated graft polymerization of glycidyl methacrylate (GMA) in emulsion phase from polyethylene/polypropylene nonwoven fabric using 4‐cyano‐4‐[(phenylcarbonothioyl)thio]pentanoic acid under γ‐irradiation at ambient condition is reported. While conventional graft polymerization in emulsion phase yielded grafted materials with low of grafting (Dg) values [<7.5% at 10% (wt/wt) GMA], addition of RAFT agent to the graft polymerization system allowed the synthesis of polyethylene/polypropylene‐g‐poly(GMA) with more tunable Dg (8% ≤ Dg ≤ 94%) by controlling the grafting parameters. Relatively good control (PDI ～1.2 for selected grafting conditions) during polymerization was attained at 100:1 monomer‐to‐RAFT agent molar ratio. The number average molecular weight of free poly(glycidyl methacrylate) (PGMA) increased as a function of monomer conversion. NMR analyses of the free PGMA homopolymers indicate the presence of dithiobenzoate group from 4‐cyano‐4‐((phenylcarbonothioyl)thio) pentanoic acid on the polymer chain. The reactive pendant oxirane group of the grafted GMA can be modified for various environmental and industrial applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45270.     

Synthesis,characterization of the luminescent lanthanide complexes with copolymer of (Z)‐4‐oxo‐4‐phenyloxyl‐2‐butenoic acid and styrene

The copolymers of (Z)‐4‐oxo‐4‐phenoxyl‐2‐butenoic acid with styrene (PSt/OPBA) and their macromolecular luminous lanthanide complexes (Ln‐PSt/OPBA) have been synthesized and characterized by means of GPC, elemental analysis, FTIR, X‐ray powder diffraction, spectral analysis, and thermal analysis. The IR studies showed that the carboxylic groups on the side chain of the polymer were coordinated to lanthanide ions by bidentate manner. However, the ethereal oxygen, instead of carbonyl, also bonded to the central lanthanide ions, which was an intriguing phenomenon for ester‐coordinated complexes. X‐ray diffraction experiments revealed that these PSt/OPBA copolymers were amorphous, but Ln‐PSt/OPBA were crystalline, in which the complex Eu‐L^c belonged to a high symmetric structure of orthorhombic quadratic system, with a = 10.59 ± 0.02 Å, c = 8.02 ± 0.01 Å; c/a = 0.763. In addition, the value δ (the number of free carboxylic groups) in Ln‐PSt/OPBA complexes increased with the decreasing mole ratio of styrene in the copolymers, while it decreased with increasing pH values of the solution. Eu³⁺ and Tb³⁺ complexes exhibited characteristic fluorescence with comparatively high brightness and good monochromaticity, and the fluorescence intensity was enhanced with increasing the content of lanthanide up to around 18 wt % without typical fluorescence concentration quenching behavior in the solid state. So using polymers as a matrix, Ln‐PSt/OPBA are likely to provide new materials that possess specific properties and desired features. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Selective removal of 1,2‐propanediol and 1,2‐butanediol from bio‐ethylene glycol by catalytic reaction

Ethylene glycol (EG), synthesized from biomass, frequently contains refractory 1,2‐propanediol (PDO) and 1,2‐butanediol (BDO). Selective removal of PDO and BDO was realized herein by catalytic dehydration to form volatile aldehydes, ketones, and acetals. Various acidic and basic catalysts were screened under a range of conditions for the conversion of a mixture containing 73 wt % EG, 20 wt % PDO, and 7 wt % BDO. Over H‐Beta 26 zeolite, the most selective catalyst among tested, PDO and BDO conversions reached 99.1 and 99.3%, respectively, after 4 h reaction at 453 K, with separation factors over 2. The activation energies for EG, PDO, and BDO dehydration were ca. 99.3, 69.9, and 54.0 kJ/mol, respectively, accounting for the high reactivity of PDO and BDO. The dehydration largely proceeded in the micropores of H‐Beta and depended on the number of strong Brønsted acid sites, but excessively strong acid sites enhanced the polymerization of EG. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4032–4042, 2017     

Synthesis and properties of the copolymer of acrylamide with 2‐acrylamido‐2‐methylpropanesulfonic acid

A cross‐linked copolymer of acrylamide (AM) with 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was prepared by solution polymerization. In this reaction, potassium persulfate (PPS) and N,N′‐methylenebisacrylamide (NMBA) were used as initiator and cross‐linker, respectively. This copolymer, poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropanesulfonic acid) (PAMA), can absorb up to 1749 g/g of dry polymer in distilled water and 87 g/g of dry polymer in 0.9 wt % NaCl aqueous solution at room temperature. The PAMA also has excellent performance in absorbing pure alcohols. Its absorbencies in methanol and glycol are about 310 g/g and 660 g/g, respectively. The effects of various salt solutions on the swelling properties were studied systematically, and the relationship between the absorbency and the concentrations of the different salt solutions can be expressed as Q = kcⁿ. Experimental results indicate that the absorbencies were stable at different water temperatures. The swelling rates of the copolymer in distilled water and a water/ethanol mixture (V_water:V_alcohol = 1:1) were also investigated, and the results showed that PAMA could absorb 992 g of distilled water per gram of dry polymer and 739 g of water/ethanol mixture per gram of dry polymer in five minutes. The PAMA has such good water retention at higher temperatures that the swollen gel can retain 71.6 and 49.5% of the maximum absorbency after being heated for 9 hours at 60 and 80 °C, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3481–3487, 2003     

Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)‐co‐adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)‐co‐adipate]/clay ternary nanocomposites

A series of blends based on poly(lactic acid) (PLA) and poly[(butylene succinate)‐co‐adipate] (PBSA) as well as their nanocomposites with nanoclay (PLA/PBSA/Clay ternary nanocomposites) were prepared using the twin‐screw extruder. The blends were prepared for PBSA contents ranging from 25 to 75 wt % and their corresponding nanocomposites were prepared at a single‐clay concentration. The morphology and structure of the blends and the nanocomposites were examined using field emission scanning electron microscopy, transmission electron microscopy, and X‐ray diffraction. Rheological properties (dynamic oscillatory shear measurements and elongational viscosities) of the blends, nanocomposites, and pure components were studied in detail. The strain hardening intensity of different blends and nanocomposites was compared with the behavior of the pure components. Strong strain hardening behavior was observed for blends composed of 50 wt % and higher PBSA content. However, the effect of PBSA content on the elongational viscosity was less pronounced in PLA/PBSA/Clay ternary nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Kinetics of homogeneous 5‐hydroxymethylfurfural oxidation to 2,5‐furandicarboxylic acid with Co/Mn/Br catalyst

2,5‐furandicarboxylic acid (FDCA) is a potential non‐phthalate based bio‐renewable substitute for terephthalic acid‐based plastics. Herein, we present an investigation of the oxidation rate of 5‐hydroxymethylfurfural (HMF) to FDCA in acetic acid medium using Co/Mn/Br catalyst. Transient concentration profiles of the reactant (HMF), intermediates [2,5‐diformylfuran (DFF), 5‐formyl‐2‐furancarboxylic acid (FFCA)], and the desired product (FDCA) were obtained for this relatively fast reaction in a stirred semi‐batch reactor using rapid in‐line sampling. Comparison of the effective rate constants for the series oxidation steps with predicted gas–liquid mass transfer coefficients reveals that except for the FFCA → FDCA step, the first two oxidation steps are subject to gas–liquid mass transfer limitations even at high stirrer speeds. Novel reactor configurations, such as a reactor in which the reaction mixture is dispersed as fine droplets into a gas phase containing oxygen, are required to overcome oxygen starvation in the liquid phase and further intensify FDCA production. © 2016 American Institute of Chemical Engineers AIChE J, 63: 162–171, 2017