Simple synthesis of honeysuckle-like CuCo2O4/CuO composites as a battery type electrode material for high-performance hybrid supercapacitors

In this paper, porous CuCo₂O₄/CuO composites with novel honeysuckle-like shape (CuCo₂O₄/CuO HCs) have been prepared for the first time by a simple hydrothermal method and followed with an additional annealing process in air. The unique CuCo₂O₄/CuO HCs consisted of dense and slender petals with length of 1.3–1.5 μm and width of about 50 nm, and possessed a specific surface area of 36.09 m² g^?1 with main pore size distribution at 10.63 nm. When used as the electrode materials for supercapacitors, the CuCo₂O₄/CuO HCs exhibited excellent electrochemical performances with a high specific capacity of 350.69 C g^?1 at 1 A g^?1, a rate capability of 78.6% at 10 A g^?1, and 96.2% capacity retention after 5000 cycles at a current density of 5 A g^?1. In addition, a hybrid supercapacitor (CuCo₂O₄/CuO HCs//AC HSC) was assembled using the CuCo₂O₄/CuO HCs as positive electrode and activated carbon (AC) as negative electrode. The HSC device delivered a specific capacity of 187.85 C g^?1 at 1 A g^?1 and a superior cycling stability with 104.7% capacity retention after 5000 cycles at 5 A g^?1, and possessed a high energy density of 41.76 W h kg^?1 at a power density of 800.27 W kg^?1. These outstanding electrochemical performances manifested the great potential of CuCo₂O₄/CuO HCs as a promising battery-type electrode material for the next-generation advanced supercapacitors with high-performance.     

Facile preparation of SnS2 nanoflowers and nanoplates for the application of high-performance hybrid supercapacitors

In this work, the SnS₂ nanoflowers (SnS₂ NFs) were solvothermally prepared in the solvent of ethanol, while SnS₂ nanoplates (SnS₂ NPs) were obtained through the identical conditions except for the solvent of water. The flowers were assembled with numerous nanosheets with very thin thickness, and the NPs exhibited hexagonal shape. When used as the battery-type electrode material for supercapacitors, the SnS₂ NFs delivered a specific capacity of as high as 264.4 C g^?1 at 1 A g^?1, which was higher than the 201.6 C g^?1 of SnS₂ NPs. Furthermore, a hybrid supercapacitor (HSC) was assembled with the SnS₂ as positive electrode and activated carbon (AC) as negative electrode, respectively. The SnS₂ NFs//AC HSC exhibited a high energy density of 28.1 Wh kg^?1 at 904.3 W kg^?1, which was higher than the 24.2 Wh kg^?1 at 844.3 W kg^?1 of SnS₂ NPs//AC HSC. Especially, when the power density was enhanced to the highest value of 8666.8 W kg^?1, the NFs-based device could still hold 20.4 Wh kg^?1. In addition, both HSC devices showed an excellent cycling stability after 5000 cycles at 5 A g^?1. The present method is simple and can be extended to the preparation of other transition metal sulfides (TMSs)-based electrode materials with brilliant electrochemical performance for supercapacitors.     

A comparative study of various polyelectrolyte/nanocomposite electrode combinations in symmetric supercapacitors

A more practical, nontoxic and cheaper electrolyte, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was used to construct supercapacitors with different nanocomposite electrodes. The flexible devices were fabricated including active carbon (AC) electrode and nanocomposites electrodes of AC/nano-silica (nano-SiO₂) and AC/multiwalled carbon nanotubes (MWCNTs) at various weight percentages. The symmetrical cell made from AC electrodes generated a maximum specific capacitance (Cs) of 315 F g⁻¹ at 0.5 A g⁻¹. The energy density of this device was 55.5 Wh kg⁻¹ at a power density of 690 W kg⁻¹. Excellent performance was achieved after 5000 charge-discharge cycles where the supercapacitor maintains 92% of its activity. The energy storage capability of the supercapacitors was also investigated with the addition of nano-SiO₂ and MWCNTs. The Cs of the supercapacitors made with the electrodes AC/nano-SiO₂ (5%, 10%, 25% and 50%) were 172, 228, 247 and 55 F g⁻¹, respectively. Similarly, the capacity of the device including the electrodes of AC/MWCNTs (5%, 10%, 25% and 50%) varied as 191, 244, 93 and 20 F g⁻¹ at 0.5 A g⁻¹. The maximum energy density of the devices having nano-SiO₂ and MWCNT were 44.4 Wh kg⁻¹ and 43.8 Wh kg⁻¹, respectively at a power density of 520 W kg⁻¹. A supercapacitor with certain dimension successfully operated a light-emitting diode (LED).     

Battery-type and binder-free MgCo2O4-NWs@NF electrode materials for the assembly of advanced hybrid supercapacitors

In this study, the hetero-structure of MgCo₂O₄ nanowires (MCO-NWs) and microcubes (MCO-MCs) on the skeleton of nickel foam (NF) was realized through a simple hydrothermal method and subsequent annealing treatment, and then served as a binder-free cathode for assembly of high-performance hybrid supercapacitor (HSC). Such synthetic methodology avoided the traditional usage of conductive and binder reagents for the electrode fabrication. The electrochemical tests indicated its battery-type characteristics, and the MCO-NWs@NF exhibited a huge specific capacity (C_s) of 389.0 C g^?1 as well as 86.2% capacity retention when the current density boosted from 1 to 10 A g^?1. The assembled HSC with activated carbon (AC) as anode further demonstrated the advantages of this electrode material. After 5000 cycles at 6 A g^?1, the MCO-NWs@NF//AC HSC showed good long-term cycling stability without any decay in capacitance, and could deliver an energy density (E_d) of 37.9 W h kg^?1 at the power density (P_d) of 958.1 W kg^?1, higher than the 30.4 W h kg^?1 of MCs-based HSC. These impressive results regarding electrochemical performance suggest that MCO-NWs@NF may be a promising candidate to serve as a battery-type material in electrochemical energy storage applications such as HSCs, batteries, and so on.     

Constructing 3D honeycomb-like CoMn2O4 nanoarchitecture on nitrogen-doped graphene coating Ni foam as flexible battery-type electrodes for advanced supercapattery

Reasonable structural design is significant to enable the performance in advanced energy storage devices. Herein, a 3D honeycomb-like CoMn₂O₄ nanoarchitecture (CMO) on nitrogen-doped graphene (NG) coating Ni foam (denoted as Ni/NG/CMO) flexible battery-type electrode was prepared by a facile two-step hydrothermal strategy. The honeycomb-like CoMn₂O₄ arrays not only provide abundant active sites but can also be closely combined with the Ni foam/NG substrate, which enables high reversible capacity and good cycle stability during the long cycles. Benefiting from the compositional features and 3D honeycomb-like nanoarchitecture, the Ni/NG/CMO composite electrode displays improved electrochemical performance with remarkable specific capacity of 527.0C g⁻¹ at a current density of 1 A g⁻¹, outstanding rate capability (338.6C g⁻¹ even at 20 A g⁻¹). In addition, a flexible binder-free supercapattery device has been assembled with Ni/NG/CMO as positive electrode and 3D Ni/NG as negative electrode. Such a supercapattery delivers a high energy density of 44.1 Wh·kg⁻¹ at 992.6 W kg⁻¹, 20.3 Wh·kg⁻¹ at 12430.0 W kg⁻¹ as well as excellent cycling durability. The 3D honeycomb-like Ni/NG/CMO could be considered as an advanced flexible battery-type material for high capacity and energy density fields.     

Facile sonochemical synthesis of strontium phosphate based materials for potential application in supercapattery devices

Among hybrid energy storage devices, supercapattery gained profound research interest due to its ability to give high energy density while maintaining the power density and cyclic stability. Herein, novel low-cost strontium based materials are synthesized by controlled sonochemical method and subsequently calcined at various temperatures. The multiple phases of the material synergistically contributed in the electrochemical charge storage process and give high specific capacity of 220 C g⁻¹ (as-prepared material) and 213 C g⁻¹ (calcined at 200 °C) at 0.5 A g⁻¹. A thorough electrochemical performance of optimized material is investigated as an electrode in asymmetric device. The supercapattery (SP2//AC) exhibits a specific capacity of 103.4 C g⁻¹ at 0.5 A g⁻¹ in the voltage range of 0–1.7 V. Furthermore, supercapattery offers a considerably high specific energy of 24.4 Wh kg⁻¹ at a specific power of 425 W kg⁻¹ and an excellent specific power of 1870 W kg⁻¹ by maintaining specific energy at 14.5 Wh kg⁻¹. In addition, the device retained its specific capacity to 90% after 3000 charging/discharging cycles at 1 A g⁻¹. Strontium based materials could be proposed as an appropriate electrode material for energy storage systems.     

Fabrication of a ternary PANI@Fe3O4@CFs nanocomposite as a high performance electrode for solid-state supercapacitors

In this work, a solid-state high performance supercapacitor is fabricated based on a ternary polyaniline@Fe₃O₄@carbon fibers nanocomposite. To prepare the polyaniline@Fe₃O₄@carbon fibers electrodes, a two-step method including electrophoretic deposition of Fe₃O₄ nanoparticles on carbon fibres followed by an in situ polymerization process of polyaniline is utilized. The results show that the polyaniline@Fe₃O₄@carbon fibers nanocomposite with a layer by layer microstructure is successfully formed. The fabricated nanocomposite represents a specific surface area of 3.12 m² g⁻¹. The electrochemical measurements in a three-electrode configuration reveals a high specific capacitance of 245.5 F g⁻¹ at 0.5 A g⁻¹ and an excellent cycle stability (82.44% after 1000 cycle) of the polyaniline@Fe₃O₄@carbon fibers electrode. The as-fabricated solid-state supercapacitor based on the polyaniline@Fe₃O₄@carbon fiber nanocomposite cloth with a surface area of 25 cm² powers up a blue light-emitting diode for 4 min and delivers a high energy density of 78.6 Wh.kg⁻¹ at a power density of 1047.5 W kg⁻¹.     

Gamma-ray-irradiated construction of CuCo-based nanocomposites for attractive hydrogen production and tandem hydrogenation

Nitroarenes are important chemicals but display toxity to environment and organisms. In the present work, non-precious bicomponent CuCo-based nanocomposites (CuCo₂O₄/CuO) prepared with the aid of gamma(γ)-ray-irradiation were utilized for hydrogen production from ammonia borane (AB) hydrolysis and tandem hydrogenation of nitroarenes. The γ-ray-irradiation remarkably boosted the catalytic performance for the AB dehydrogenation and the hydrogenation of nitroarenes. Hydrogen generation rate (HGR) for the CuCo₂O₄/CuO catalyst reached 856.3 mL min⁻¹·g_cat⁻¹, which was approximately two-fold than that of the catalyst prepared by conventional method (only 397.1 mL min⁻¹·g_cat⁻¹). Meanwhile, this irradiation-induced catalyst also showed excellent performance for the hydrogenation of screened nitroarenes with 100% yield of the corresponding amines. The CuCo₂O₄/CuO catalyst exhibited high reusability with ∼90% remained activity of the initial one after six runs. The bicomponent CuCo₂O₄/CuO exhibited positive hydrogen spillover and synergistic effects contributing to the considerable activity improvement, which is beneficial to the detoxication, conversion and utilization of poison nitroarenes.     

One-pot sonochemical synthesis of hierarchical MnWO4 microflowers as effective electrodes in neutral electrolyte for high performance asymmetric supercapacitors

In this article, manganese tungstate (MnWO₄) microflowers as electrode materials for high performance supercapacitor applications are prepared by a one-pot sonochemical synthesis. The crystalline structure and morphology of MnWO₄ microflowers are characterized through X-ray diffraction, field emission scanning electron microscopy. The electrochemical properties of the MnWO₄ microflowers are investigated using cyclic voltammograms, galvanostatic charge/discharge and electrochemical impedance spectroscopy. The MnWO₄ microflowers as electrode materials possess a maximum specific capacitance of 324 F g⁻¹ at 1 mA cm⁻² in the potential window from 0 to +1 V and an excellent cycling stability of 93% after 8000 cycles at a current density of 3 mA cm⁻². An asymmetric supercapacitor device is fabricated using the MnWO₄ and iron oxide (Fe₃O₄)/multi-wall carbon nanotube as the positive and negative electrode materials, it can be cycled reversibly at a potential window at 1.8 V. The fabricated ASC device can deliver a high energy density of 34 Wh kg⁻¹ at a power density of 500 W kg⁻¹ with cycling stability of 84% capacitance retained after 3000 cycles. The above results demonstrate that MnWO₄ microflowers can be used as promising high capacity electrode materials in neutral electrolyte for high performance supercapacitors.     

Facile one pot sonochemical synthesis of CoFe2O4/MWCNTs hybrids with well-dispersed MWCNTs for asymmetric hybrid supercapacitor applications

In this study, a facile sonochemical strategy is used for the fabrication of CoFe₂O₄/MWCNTs hybrids as an electrode material for supercapacitor applications. FE-SEM image demonstrates the uniformly well-distributed MWCNTs as well as porous structures in the prepared CoFe₂O₄/MWCNTs hybrids, suggesting 3D network formation of conductive pathway, which can enhance the charge and mass transport properties between the electrodes and electrolytes during the faradic redox reactions. The as-fabricated CoFe₂O₄/MWCNTs hybrids with the MWCNTs concentration of 15 mg (CFC15) delivers maximum specific capacitance of 390 F g⁻¹ at a current density of 1 mA cm⁻², excellent rate capability (275 F g⁻¹ at 10 mA cm⁻²), and outstanding cycling stability (86.9% capacitance retention after 2000 cycles at 3 mA cm⁻²). Furthermore, the electrochemical performance of the CFC15 is superior to those of pure CoFe₂O₄ and other CoFe₂O₄/MWCNTs hybrids (CFC5, CFC10 and CFC20), indicating well-dispersion MWCNTs and uniform porous structures. Also, as-fabricated asymmetric supercapacitor device using the CoFe₂O₄/MWCNTs hybrids as the positive electrode and activated carbon as the negative electrode materials shows the outstanding supercapacitive performance (high specific capacitance, superior cycling stability and good rate capability) for energy storage devices. It delivers a capacitance value of 81 F g⁻¹ at 3 mA cm⁻², ca. 92% retention of its initial capacitance value after 2000 charge-discharge cycles and excellent energy density (26.67 W h kg⁻¹) at high power density (~319 W kg⁻¹).     

Self-assembled Mo doped Ni-MOF nanosheets based electrode material for high performance battery-supercapacitor hybrid device

The application of MOF materials in supercapacitors has been greatly restricted due to the poor conductivity and structural stability. Given that, this work improves the conductivity and stability of Ni-MOF by self-assembled strategy. We report here the Mo-doped Ni-MOF nanosheets (M-NMN), in which the Mo-based clusters are encapsulated in the holes of the Ni-MOF frame structure by self-assembly. The results show that the M-NMN-1 material with a Mi/Mo molar ratio of 1: 1 exhibits an excellent electrochemical performance. Furthermore, the nanosheet structure of the M-NMN-1 materials acts as a “superhigh way” for charge transport to accelerate charge transfer rate and enhance the conductivity of the electrode materials. As-prepared M-NMN-1 electrode material exhibits high specific capacity of 802 C g⁻¹ at 1 A g⁻¹. Furthermore, assembled battery-supercapacitor hybrid device exhibits an excellent energy density of 59 Wh kg⁻¹ at a power density of 802 W kg⁻¹, and superior cycle retention of 93% after 20,000 cycles.     

Facile fabrication of comb-like porous NiCo2O4 nanoneedles on Ni foam as an advanced electrode for high-performance supercapacitor

It is very desirable to develop the high-performance supercapacitors to meet the rapidly growing demands for energy-autonomous operation and miniaturization of devices. Herein, comb-like porous NiCo₂O₄ nanoneedles on the three-dimension (3D) nickel foam (NF) have been successfully synthesized through a facile pulsed laser ablation (PLA) approach without any post-treatments and surfactant (denoted as NiCo₂O₄-PLA). The influence of working solution during the fabricated process on the properties of NiCo₂O₄-PLA has been demonstrated in detail in terms of the crystalline structure, specific surface area, morphology, and electrochemical performance. Benefiting from the large specific surface (261.4 m² g⁻¹), abundant pores, and highly conductive scaffold, the NiCo₂O₄-PLA binder-free electrode exhibits an outstanding specific capacitance (1650 F g⁻¹ at a current density of 1 A g⁻¹) and eminent cycling performance (91.78% retention after a 12,000-cycle test at a current density of 10 A g⁻¹) compared with the control samples. The assembled asymmetric device (NiCo₂O₄-PLA//AC-ASCs) delivers the high specific capacitance of 126.9 F g⁻¹ at the current density of 1 A g⁻¹, the large energy density of 56.7 Wh kg⁻¹ at a power density of 756 W kg⁻¹, and the low internal resistance. The attractive results strongly prove that it is an ideal candidate for advanced supercapacitor application.     

Formation of ultra-small Mn3O4 nanoparticles trapped in nanochannels of hollow carbon spheres by nanoconfinement with excellent supercapacitor performance

Ultra-small Mn₃O₄ nanoparticles are formed in the shell of hollow carbon spheres (HCSMn₃O₄) via nanoconfinement growth. The HCS with special cylindrical channels (about 2 nm) provides the limited space for growth of Mn₃O₄ nanoparticles and serves as a conductive substrate in electrochemical applications. The unique hollow structure shortens the distance for electrolytes to access Mn₃O₄ during the charging/discharging process. In the hybrid HCS-Mn₃O₄ structure, the interaction between Mn₃O₄ nanoparticles and HCS was enhanced resulting in good conductivity and electrochemical properties. The two-electrode supercapacitor cell composed of HCS-Mn₃O₄ shows high capacitance and energy density. The highest specific capacitance of 430 F g⁻¹ is achieved at a scanning rate of 1 mV s⁻¹ and the largest energy density of 13.5 Wh kg⁻¹ is observed at a power density of 0.3 kW kg⁻¹ by HCS-Mn₃O₄-5 with 93.15% retention after 10,000 cycles in 5 M LiCl. Symmetric HCS-Mn₃O₄-5//HCS-Mn₃O₄-5 shows higher energy density of 22.6 Wh kg⁻¹ at a power density of 0.4 kW kg⁻¹ and power density of 3.3 kW kg⁻¹ at an energy density of 16 Wh kg⁻¹ with 1 M Li₂SO₄. The technique to prepare the HCS-Mn₃O₄ hybrid materials is simple and readily scalable to satisfy industrial demand.     

Co-precipitation synthesis of nickel cobalt hexacyanoferrate for binder-free high-performance supercapacitor electrodes

Prussian blue analogue with a typical metal-organic framework has been widely used as an electrode material in supercapacitor. In this work, nickel cobalt hexacyanoferrate (Ni₂CoHCF) was grown on nickel foam directly using a simple co-precipitation method. The as-prepared Ni₂CoHCF was tested by transmission electron microscope, scanning electron microscope, X-ray diffraction and X-ray electron energy spectrum. The results showed that Ni₂CoHCF has a unique open face-centered cubic structure. The Ni₂CoHCF was used to set an asymmetric supercapacitor directly. A series of electrochemical tests showed that Ni₂CoHCF had an excellent electrochemical performance. The specific capacitance of the supercapacitor was 585 C g⁻¹ (1300.0 F g⁻¹, 162.5 mAh g⁻¹) at the current density of 0.5 A g⁻¹. After 2000 cycles, it still maintained 85.57% of its initial specific capacitance at the current density of 10 A g⁻¹. The energy density was 30.59 Wh kg⁻¹ at the power density of 378.7 W kg⁻¹. The results show that the supercapacitor constructed by Ni₂CoHCF as an electrode material has high-current charge-discharge capacity, high energy density and long cycle life.     

Synthesis of hollow carbon-incorporated NiCoM (M = Mn,Cu, Zn) layered double hydroxide nanocages for hybrid supercapacitors

Nanostructures and compositions are the most crucial aspects in the design of electrode materials with excellent properties for hybrid supercapacitors (HSCs). In this study, bimetallic CoM-zeolitic imidazolate framework-67 (CoM-ZIF-67, M = Mn, Cu, and Zn) derived nanosheet-constructed hollow carbon-incorporated NiCoM layered double hydroxide nanocages (NiCoM-LDH/C) are successfully synthesized via the thermal annealing and subsequent etching/ion-exchange reaction. As a consequence, the NiCoM-LDH/C materials exhibit significantly improved electrochemical performance. Specifically, the optimized NiCoMn-LDH/C electrode possesses an excellent capacity performance of 888.3 C g^?1 at 1 A g^?1. Moreover, the HSC device assembled by NiCoMn-LDH/C and active carbon delivers a remarkable energy density of 46.5 Wh kg^?1 at a power density of 792.5 W kg^?1 and possesses superior cyclic stability with about 92.05% capacity retention after 5000 cycles. This work may offer a feasible and effective approach for the synthesis of carbon-incorporated ternary layered double hydroxide nanocage materials for high-performance HSC applications.     

Electrospun NiO/C nanofibers as electrode materials for hybrid supercapacitors with superior electrochemical performance

In this work, the porous NiO/C nanofibers (NFs) were rationally designed and prepared by a convenient electrospinning method, and followed with a calcination conversion of the precursor in air. The NiO/C composite exhibited a net-like structure that was composed of many intertwined NFs with an average diameter of about 200 nm. The electrochemical measurements demonstrated that the porous NiO/C NFs exhibited an electrochemical feature of battery-type electrode material, and delivered a specific capacity as high as 461.26 C g^?1 under 1 A g^?1 and an excellent rate capability with 82.7% capacity retention at 10 A g^?1. A hybrid supercapacitor (NiO/C NFs//AC HSC) was assembled with NiO/C NFs as positive electrode and activated carbon (AC) as negative electrode, which delivered an energy density of 31.82 W h kg^?1 under a power density of 816.36 W kg^?1 along with an outstanding cyclic stability of 90.9% capacity retention over 5000 cycles at 5 A g^?1. This simple synthetic method can be extended to the fabrication of other transition metal oxides (TMOs)-based NFs for their further applications in high-performance electrochemical energy storage devices such as hybrid supercapacitors, batteries, and so on.     

TiO2 nanotubes supported ultrafine MnCo2O4 nanoparticles as a superior-performance anode for lithium-ion capacitors

Lithium-ion capacitors (LICs) are considered as a promising energy storage device possessing large specific energy along with high specific power due to the integration of the merits of electric double-layer capacitors (ELDCs) and lithium-ion batteries (LIBs). In the present work, TiO₂ nanotubes supported ultrafine MnCo₂O₄ nanoparticles with the size of 5–10 nm is solvothermally synthesized. It is found that the introduction of TiO₂ nanotubes can weaken the aggregation of MnCo₂O₄ nanoparticles, therefore causing the enhancement in the electrode/electrolyte interfacial contact and the reduction in Li ⁺ diffusion path. Benefiting from the synergy effect of MnCo₂O₄ and TiO₂ which can alleviate the volume change of MnCo₂O₄, the MnCo₂O₄/TiO₂ composite used in LIBs displays a large reversible capacity of 743 mAh g⁻¹ at 0.2 A g⁻¹ after 100 cycles and impressive rate performance. This composite as anode is assembled with an activated carbon (AC) electrode as cathode into MnCo₂O₄/TiO₂//AC LIC working in a wide voltage range of 0.5–4 V. This LIC can deliver high specific energies of 89.8 and 44.1 Wh kg⁻¹ at specific power of 0.25 and 3.41 kW kg⁻¹, respectively, and presents outstanding cyclic stability (76.4% of initial capacity at the end of 5000 cycles).     

Self-assembly of novel cobalt iron phosphate nanoparticles for the solid-state supercapattery and high-performance hydrogen evolution reaction

In this article, we report the preparation of novel cobalt iron phosphate nanoparticles which are self-assembled for energy storage, energy conversion, and sustainability. The self-assembled nanoparticles provide an efficient pathway for the transfer of electrons from the bulk of the materials to the interface of the electrode. This hypothesis has been derived from the analysis based on the electrochemical results for the supercapacitor-based energy storage and hydrogen evolution. The electrode consisting of self-assembled nanoparticles exhibits a maximum specific capacity of 280 C g⁻¹ at a specific current of 1 A g⁻¹. The cyclic voltammetric results suggest the prominent charge storage is by the faradaic reaction which has been concluded from Dunn's approach. The supercapattery device utilizing activated carbon (AC) as the negative electrode and cobalt iron phosphate as the positive electrode exhibit a specific capacity of 210 C g⁻¹ at 2 A g⁻¹ while the specific energy of 47.6 Wh kg^-1 at 1.6 kW kg⁻¹. Furthermore, the electrode actively catalyzes the electrochemical hydrogen evolution reaction and it can be lowering the overpotential required by the hydrogen generation. It exhibits the overpotential of 197 mV while the electrode represents the long-time (24 h) consistency for hydrogen production. These results indicate that the novel cobalt iron phosphate nanoparticles could be a potential candidate for energy storage and conversion purposes.     

Yuba-like porous carbon microrods derived from celosia cristata for high-performance supercapacitors and efficient oxygen reduction electrocatalysts

Here, a novel yuba-like porous carbon microrod is prepared via a simple and facile strategy by using the fluffy fibers of celosia cristata petals (FCCP) as the raw material. The optimized carbon microrod (FCCP-CM-900) possesses unique yuba-like structure, high specific surface area (1680 m² g⁻¹) and large pore volume (0.98 cm³ g⁻¹), and effective nitrogen (∼4.52 at.%) and oxygen (∼5.49 at.%) doping, which can enhance the wettability and conductivity (7.9 S cm⁻¹). As the electrode material for supercapacitor, FCCP-CM-900-based supercapacitor presents high specific capacitance (314.5 F g⁻¹ at 0.5 A g⁻¹) in 6.0 M KOH aqueous electrolyte. The FCCP-CM-900-based symmetrical supercapacitor displays high energy density (18.6 Wh kg⁻¹ at 233.4 W kg⁻¹) and outstanding cycling stability (98% capacitance retention after 10,000 cycles) in 1.0 M Na₂SO₄ electrolyte. In addition, served as oxygen reduction electrocatalyst, the FCCP-CM-900 also exhibits excellent catalytic activity, good durability, together with high methanol tolerance in alkaline electrolyte, which makes it a highly efficient air cathode material toward zinc–air cell.     

Improved energy conversion and storage performance enabled by hierarchical zigzag-like P-doped CuCo2O4 nanosheets based 3D electrode materials

Developing a bi-functional material which can meet both electrochemical water splitting and supercapacitors (SCs) is a hot spot in current research. In this study, hierarchical zigzag-like phosphorus doped CuCo₂O₄ nanosheets based 3D electrode materials were successfully synthesized via a hydrothermal method and followed by thermal treatment. Since the unique morphology of 2D nanosheets with zigzag-like edges could provide more reactive sites, which is not only conducive to the hydrogen evolution reaction (HER), but also conducive to the electrochemical energy storage. Meanwhile, the doping of phosphorus was adopted to improve the conductivity, which would further enhance the electrochemical properties of CuCo₂O₄. Thereafter, its performance for HER and SCs in 1 M KOH were systematically investigated. As an electrode for HER, it only required a low overpotential of 152 mV to reach 10 mA cm^?2 with a Tafel slope of 115.7 mV dec^?1. Furthermore, I-t test result showed an excellent stability. As an electrode for SCs, it exhibited a high specific capacity of 896.9C g^?1 at 1 A g^?1 in three-electrode system. All in all, the obtained hierarchical zigzag-like phosphorus doped CuCo₂O₄ nanosheets provided a feasible route for the design of bi-functional electrode materials both for energy conversion and storage.