Facile sonochemical synthesis of strontium phosphate based materials for potential application in supercapattery devices

Among hybrid energy storage devices, supercapattery gained profound research interest due to its ability to give high energy density while maintaining the power density and cyclic stability. Herein, novel low-cost strontium based materials are synthesized by controlled sonochemical method and subsequently calcined at various temperatures. The multiple phases of the material synergistically contributed in the electrochemical charge storage process and give high specific capacity of 220 C g⁻¹ (as-prepared material) and 213 C g⁻¹ (calcined at 200 °C) at 0.5 A g⁻¹. A thorough electrochemical performance of optimized material is investigated as an electrode in asymmetric device. The supercapattery (SP2//AC) exhibits a specific capacity of 103.4 C g⁻¹ at 0.5 A g⁻¹ in the voltage range of 0–1.7 V. Furthermore, supercapattery offers a considerably high specific energy of 24.4 Wh kg⁻¹ at a specific power of 425 W kg⁻¹ and an excellent specific power of 1870 W kg⁻¹ by maintaining specific energy at 14.5 Wh kg⁻¹. In addition, the device retained its specific capacity to 90% after 3000 charging/discharging cycles at 1 A g⁻¹. Strontium based materials could be proposed as an appropriate electrode material for energy storage systems.     

Hierarchical design of Ni(OH)2/MnMoO4 composite on reduced graphene oxide/Ni foam for high-performances battery-supercapacitors hybrid device

Design and synthesis advanced battery-type electrode materials with outstanding electrical conductivity and remarkable theoretical specific capacity are crucial to enhance the comprehensive performances for battery-supercapacitors (SCs). Herein, Ni(OH)₂/MnMoO₄ composite on reduced graphene oxide/Ni foam (rGO/NF) was successfully fabricated through the hydrothermal method and potentiostatic electrodeposition (Ni(OH)₂/MnMoO₄/rGO/NF). The unique honeycomb structure and the efficient synergistic effects among MnMoO₄ and Ni(OH)₂ of the as-prepared battery type electrode, as well as outstanding electronic conductivity of the reduced graphene oxide, were beneficial to the enhanced electrochemically active sites and increased specific capacity. Ni(OH)₂/MnMoO₄/rGO/NF composite employed for SCs yielded the maximum specific capacity of 1329.1 C g⁻¹ and a superb cycle property of 86.8% during 5000 cycles. Furthermore, the battery-supercapacitor hybrid (BSH) device with the Ni(OH)₂/MnMoO₄/rGO/NF and active carbon (AC) as-prepared samples showed the energy density of 61.4 W h kg⁻¹ at the power density of 428.4 W kg⁻¹. The capacity retention of the as-fabricated hybrid device reached 96.4% over 7000 cycles. Those consequences tested that the Ni(OH)₂/MnMoO₄/rGO/NF composite should be the promising category of battery-type electrodes materials of the next generation energy storage devices for the high-performances SCs.     

High-performance hybrid supercapacitor based on the porous copper cobaltite/cupric oxide nanosheets as a battery-type positive electrode material

In this work, CuCo₂O₄/CuO nanosheets (NSs) and CuCo₂O₄ oblique prisms (OPs) were synthesized at 130 °C with different amounts of hexamethyltetramine (HMTA) and reaction time through a hydrothermal method, and followed by an annealing treatment of precursors in air. The CuCo₂O₄/CuO NSs with 40 nm in thickness possessed a large specific surface area of 43.34 m² g⁻¹ and a mean pore size of 18.14 nm. The electrochemical tests revealed that the CuCo₂O₄/CuO NSs were belonged to the battery-type electrode material and exhibited a specific capacity of 395.55 C g⁻¹ at the current density of 1 A g⁻¹, higher than 258.16 C g⁻¹ for CuCo₂O₄ OPs. A hybrid supercapacitor (HSC) was assembled with activated carbon (AC) as negative electrode and CuCo₂O₄-based materials as positive electrode. The CuCo₂O₄/CuO NSs//AC HSC exhibited a high energy density of 30.18 Wh kg⁻¹ at a power density of 869.62 W kg⁻¹, and showed a fantastic cycling performance with 105.22% capacity retention over 5000 cycles. In contrast, the CuCo₂O₄ OPs//AC HSC delivered an energy density 26.27 Wh kg⁻¹ at 916.74 W kg⁻¹. These impressive electrochemical properties indicate that CuCo₂O₄/CuO NSs may serve as a promising electrode material for the highly capable hybrid supercapacitors in the near future.     

A cross-linked sheet structured poly(3,4-ethylenedioxythiophene) grown on Ni foam: Morphology control and application for long-life cyclic asymmetric supercapacitor

In this work, a cross-linked sheet structured conducting polymer ploy(3,4-ethylenedioxythiophene) (PEDOT) decorated on Ni foam is synthesized via one-step electrodeposition using the sodium p-toluenesulfonate (STSA) as surfactant and applied for supercapacitor electrode. The surfactants play a vital role in controlling the morphologies of PEDOT leading to the electrochemical performance difference. The optimized PEDOT electrode exhibits the highest capacitance of 711.6 mF cm⁻² at 3.0 mA cm⁻² in the three-electrode system. An asymmetric device (PEDOT/STSA//AC) is constructed by PEDOT/STSA (the positive electrode), activated carbon (AC) (the negative electrode) as well as 1 M Na₂SO₄ (the electrolyte). The device has been worked in a high-voltage range of 0–1.5 V, which displays the satisfied energy density of 14.0 Wh·kg⁻¹ at 535.5 W kg⁻¹. Furthermore, the PEDOT/STSA//AC device presents excellent rate capability and long-time cyclic stability.     

Enhanced electrochemical performance of supercapattery derived from sulphur-reduced graphene oxide/cobalt oxide composite and activated carbon from peanut shells

Sulphur-reduced graphene oxide/cobalt oxide composites (RGO-S/Co₃O₄) were successfully synthesized by varying mass loading of Co₃O₄ through a simple hydrothermal method. Structural, morphological, chemical compositional and surface area/pore-size distribution analysis of the materials were obtained by using XRD, Raman spectroscopy, SEM, TEM, EDX, FTIR, XPS and BET techniques, which reveal an effective synthesis of the RGO-S/Co₃O₄ composites. Electrochemical performance of the materials was evaluated using a three- and two-electrode system in 1 M KOH electrolyte. An optimized RGO-S/200 mg Co₃O₄ composite displayed the highest specific capacity of 171.8 mA h g⁻¹ and superior cycling stability of 99.7% for over 5000 cycles at 1 and 5 A g⁻¹, respectively, in a three-electrode system. A fabricated supercapattery device utilizing RGO-S/200 mg Co₃O₄ (positive electrode) and activated carbon from peanut shells (AC-PS) (negative electrode), revealed a high specific energy and power of 45.8 W h kg⁻¹ and 725 W kg⁻¹, respectively, at 1 A g⁻¹. The device retained 83.4% of its initial capacitance for over 10, 000 cycles with a columbic efficiency of 99.5%. Also, a capacitance retention of 71.6% was preserved after being subjected to a voltage holding test of over 150 h at its maximum potential of 1.45 V.     

Optimizing electrochemical performance of sonochemically and hydrothermally synthesized cobalt phosphate for supercapattery devices

The supercapattery (hybrid energy storage device) has procured miraculous heed for their significant electrochemical performance, constitute combine features of supercapacitor (prodigious power density) and batteries (substantial energy density), still crave for electrode material with better electrochemical conduct. Here, cobalt phosphate ((Co₃(PO₄)₂) nanostructures were synthesized using sonochemical and hydrothermal approach. The SEM, XRD, and EDX were employed to explore surface morphology, crystal structure, and elemental analysis respectively of as synthesized nanomaterials. The electrochemical performance was evaluated in two and three electrode assembly. The maximum specific capacity of 285 C g^-1 at 3 mV/s and 221 C g^-1 at 4.1 A g^-1 has been obtained by sonochemically synthesized nanomaterial (S1). This electrode material with optimum electrochemical performance was further investigated for supercapattery application. Asymmetric device was fabricated, comprising activated carbon as negative and S1 as positive electrode material. The supercapattery device exhibits a specific capacity of 147.2 C g^-1 bearing an outstanding energy density of 34.8 Whkg^?1 with a power density of 425.0 W kg^-1 at 0.5 A g^-1. The device was found to have a remarkable power density of 6800.0 W kg^-1 while retaining an energy density of 10.0 Whkg^?1 with exceptional capacity preservation of 87.2% after 10,000 consecutive GCD cycles even at 8.0 A g^-1. The device performance was further explored in terms of capacitive and diffusion controlled processes and found to have a maximum capacitive contribution of 63.8% at 100 mV s^-1. The sonochemical method was found to be the optimal route to synthesize nanomaterials for energy storage applications.     

Formation of hierarchical 3D cross-linked porous carbon with small addition of graphene for supercapacitors

In the present paper, starch was used as raw material to prepare carbon material with low-temperature hydrothermal route and hierarchical three-dimensional cross-linked porous carbon was successfully synthesized with the help of a small amount of graphene for high-performance supercapacitors. It's found that presence of graphene is a crucial condition for the formation of 3D porous carbon and graphene acts as a skeleton in the porous carbon. This kind of carbon material exhibited very high surface area of 1887.8 m² g⁻¹ and delivered excellent electrochemical performance. Its specific capacitance can reach 141 F g⁻¹ at 0.5 A g⁻¹ and more importantly, after 10,000 cycles 98.6% of initial specific capacitance can be maintained. To explore the practical application of the 3D porous carbon, an asymmetric supercapacitor coin-type device was assembled with 3D porous carbon and graphene as electrode materials in organic electrolyte. The constructed device exhibited high energy density of 48.5 Wh·kg⁻¹ at a power density of 1.5 kW kg⁻¹ and still maintains 39.625 Wh·kg⁻¹ under the high power density (15 kW kg⁻¹). These results will promote the rapid development of 3D porous carbon prepared by low-temperature route and the application in supercapacitors.     

Battery-type and binder-free MgCo2O4-NWs@NF electrode materials for the assembly of advanced hybrid supercapacitors

In this study, the hetero-structure of MgCo₂O₄ nanowires (MCO-NWs) and microcubes (MCO-MCs) on the skeleton of nickel foam (NF) was realized through a simple hydrothermal method and subsequent annealing treatment, and then served as a binder-free cathode for assembly of high-performance hybrid supercapacitor (HSC). Such synthetic methodology avoided the traditional usage of conductive and binder reagents for the electrode fabrication. The electrochemical tests indicated its battery-type characteristics, and the MCO-NWs@NF exhibited a huge specific capacity (C_s) of 389.0 C g^?1 as well as 86.2% capacity retention when the current density boosted from 1 to 10 A g^?1. The assembled HSC with activated carbon (AC) as anode further demonstrated the advantages of this electrode material. After 5000 cycles at 6 A g^?1, the MCO-NWs@NF//AC HSC showed good long-term cycling stability without any decay in capacitance, and could deliver an energy density (E_d) of 37.9 W h kg^?1 at the power density (P_d) of 958.1 W kg^?1, higher than the 30.4 W h kg^?1 of MCs-based HSC. These impressive results regarding electrochemical performance suggest that MCO-NWs@NF may be a promising candidate to serve as a battery-type material in electrochemical energy storage applications such as HSCs, batteries, and so on.     

A comparative study of various polyelectrolyte/nanocomposite electrode combinations in symmetric supercapacitors

A more practical, nontoxic and cheaper electrolyte, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was used to construct supercapacitors with different nanocomposite electrodes. The flexible devices were fabricated including active carbon (AC) electrode and nanocomposites electrodes of AC/nano-silica (nano-SiO₂) and AC/multiwalled carbon nanotubes (MWCNTs) at various weight percentages. The symmetrical cell made from AC electrodes generated a maximum specific capacitance (Cs) of 315 F g⁻¹ at 0.5 A g⁻¹. The energy density of this device was 55.5 Wh kg⁻¹ at a power density of 690 W kg⁻¹. Excellent performance was achieved after 5000 charge-discharge cycles where the supercapacitor maintains 92% of its activity. The energy storage capability of the supercapacitors was also investigated with the addition of nano-SiO₂ and MWCNTs. The Cs of the supercapacitors made with the electrodes AC/nano-SiO₂ (5%, 10%, 25% and 50%) were 172, 228, 247 and 55 F g⁻¹, respectively. Similarly, the capacity of the device including the electrodes of AC/MWCNTs (5%, 10%, 25% and 50%) varied as 191, 244, 93 and 20 F g⁻¹ at 0.5 A g⁻¹. The maximum energy density of the devices having nano-SiO₂ and MWCNT were 44.4 Wh kg⁻¹ and 43.8 Wh kg⁻¹, respectively at a power density of 520 W kg⁻¹. A supercapacitor with certain dimension successfully operated a light-emitting diode (LED).     

Complexing of NixMny sulfides microspheres via a facile solvothermal approach as advanced electrode materials with excellent charge storage performances

Mixed metal sulfides with high specific capacitances and superior rate capabilities can meet the need of new materials for technological advancement of energy storage systems. We demonstrate in this study a facile fabrication of microspheres-like Ni_xMn_y sulfides with different molar ratios of metallic salts through a one-step solvothermal route. The hierarchical Ni_xMn_y sulfides-based compounds feature spherical architectures with relatively rough surfaces and assembled from ultrasmall and self-aggregated nanoprimary crystals. Especially, the Ni_xMn_y sulfide (x/y = 1:1) presents an excellent battery-like performance with a high specific capacitance (219.4 mAh g⁻¹ at current density of 1 A g⁻¹) and a good rate capability (123 mAh g⁻¹ at 50 A g⁻¹), benefiting from the greatly improved faradaic redox processes boosted by the synergistic effect of Ni and Mn electroactive components and as well as fast mass transfer. Furthermore, the as-fabricated asymmetric supercapacitor based on Ni_xMn_y sulfide (x/y = 1:1) presents a maximum energy density of 34 W h kg⁻¹ at a power density of 868.1 W kg⁻¹ with both superior rate and long-term cycling stabilities. In view of low cost and improved electrochemical performance, such integrated compound proposes a new and feasible pathway as a potential electrode configuration for energy storage devices.     

Facile preparation of SnS2 nanoflowers and nanoplates for the application of high-performance hybrid supercapacitors

In this work, the SnS₂ nanoflowers (SnS₂ NFs) were solvothermally prepared in the solvent of ethanol, while SnS₂ nanoplates (SnS₂ NPs) were obtained through the identical conditions except for the solvent of water. The flowers were assembled with numerous nanosheets with very thin thickness, and the NPs exhibited hexagonal shape. When used as the battery-type electrode material for supercapacitors, the SnS₂ NFs delivered a specific capacity of as high as 264.4 C g^?1 at 1 A g^?1, which was higher than the 201.6 C g^?1 of SnS₂ NPs. Furthermore, a hybrid supercapacitor (HSC) was assembled with the SnS₂ as positive electrode and activated carbon (AC) as negative electrode, respectively. The SnS₂ NFs//AC HSC exhibited a high energy density of 28.1 Wh kg^?1 at 904.3 W kg^?1, which was higher than the 24.2 Wh kg^?1 at 844.3 W kg^?1 of SnS₂ NPs//AC HSC. Especially, when the power density was enhanced to the highest value of 8666.8 W kg^?1, the NFs-based device could still hold 20.4 Wh kg^?1. In addition, both HSC devices showed an excellent cycling stability after 5000 cycles at 5 A g^?1. The present method is simple and can be extended to the preparation of other transition metal sulfides (TMSs)-based electrode materials with brilliant electrochemical performance for supercapacitors.     

Chicken nuggets-like core/shell nanosheet arrays as high performance flexible all-solid-state supercapacitor cathode and buckwheat shell as anode

The energy density of a flexible all-solid-state supercapacitor (ASC) requires new electrode material with special structure and morphology as a prerequisite for its secured improvement. In this paper, a new morphological exploration of chicken nuggets-like core/shell NiCo₂O₄/MnO₂ (NCM) nanosheet arrays on Ni foam was employed. The application of this special morphology aims to greatly improve the electrochemical performance of the cathode electrode. Additionally, Buckwheat Biochar (BBC) is utilized as the anode while the PVA/KOH thin film is prepared as the separator. The chicken nuggets-like core/shell NCM nanosheet arrays were obtained by a two-step hydrothermal method. A series of characterization methods were carried out to further support the core/shell's well-designed structure and precise composition. The tests exhibited excellent specific capacitance of 593.3 F g^?1 at 5 mA cm^?2 and outstanding cycling stability with a retention of 90% after 10000 cycles. Furthermore, the assembled NCM//BBC ASC device indicated a high specific capacitance (239 F g^?1 at the current density of 5 mA cm^?2), this is in due part of the unique architecture of NCM nanosheet arrays and interconnected special porous structure of the BBC and the thin film PVA/KOH. Hence, the assembled ASC device exhibited high energy density (an energy density of 58 Wh·kg^?1 at 3263 W kg^?1) and remarkable cycling stability.     

Rational design of hierarchical core-shell structured CoMoO4@CoS composites on reduced graphene oxide for supercapacitors with enhanced electrochemical performance

Engineering multicomponent active materials as an advanced electrode with the rational designed core-shell structure is an effective way to enhance the electrochemical performances for supercapacitors. Herein, three-dimensional self-supported hierarchical CoMoO₄@CoS core-shell heterostructures supported on reduced graphene oxide/Ni foam have been rationally designed and prepared via a facile approach. The unique structure and the synergistic effects between two different materials, as well as excellent electronic conductivity of the reduced graphene oxide, contribute to the increased electrochemically active site and enhanced capacitance. The core-shell CoMoO₄@CoS composite displays the superior specific capacitance of 3380.3 F g⁻¹ (1 A g⁻¹) in the three-electrode system and 81.1% retention of the initial capacitance even after 6000 cycles. Moreover, an asymmetric device was successfully prepared using CoMoO₄@CoS and activated carbon as positive/negative electrodes. It is worth mentioning that the device delivered the high energy density of 59.2 W h kg⁻¹ at the power density of 799.8 W kg⁻¹ and the excellent cycle performance (about 91.5% capacitance retention over 6000 cycles). These results indicate that the core-shell CoMoO₄@CoS composites offers the novelty strategy for preparation of electrodes for energy conversion and storage devices.     

Facile one pot sonochemical synthesis of CoFe2O4/MWCNTs hybrids with well-dispersed MWCNTs for asymmetric hybrid supercapacitor applications

In this study, a facile sonochemical strategy is used for the fabrication of CoFe₂O₄/MWCNTs hybrids as an electrode material for supercapacitor applications. FE-SEM image demonstrates the uniformly well-distributed MWCNTs as well as porous structures in the prepared CoFe₂O₄/MWCNTs hybrids, suggesting 3D network formation of conductive pathway, which can enhance the charge and mass transport properties between the electrodes and electrolytes during the faradic redox reactions. The as-fabricated CoFe₂O₄/MWCNTs hybrids with the MWCNTs concentration of 15 mg (CFC15) delivers maximum specific capacitance of 390 F g⁻¹ at a current density of 1 mA cm⁻², excellent rate capability (275 F g⁻¹ at 10 mA cm⁻²), and outstanding cycling stability (86.9% capacitance retention after 2000 cycles at 3 mA cm⁻²). Furthermore, the electrochemical performance of the CFC15 is superior to those of pure CoFe₂O₄ and other CoFe₂O₄/MWCNTs hybrids (CFC5, CFC10 and CFC20), indicating well-dispersion MWCNTs and uniform porous structures. Also, as-fabricated asymmetric supercapacitor device using the CoFe₂O₄/MWCNTs hybrids as the positive electrode and activated carbon as the negative electrode materials shows the outstanding supercapacitive performance (high specific capacitance, superior cycling stability and good rate capability) for energy storage devices. It delivers a capacitance value of 81 F g⁻¹ at 3 mA cm⁻², ca. 92% retention of its initial capacitance value after 2000 charge-discharge cycles and excellent energy density (26.67 W h kg⁻¹) at high power density (~319 W kg⁻¹).     

Interconnected NiS-nanosheets@porous carbon derived from Zeolitic-imidazolate frameworks (ZIFs) as electrode materials for high-performance hybrid supercapacitors

Nickel sulfide-based materials have shown great potential for electrode fabrication owing to their high theoretical specific capacitance but poor conductivity and morphological aggregation. A feasible strategy is to design hybrid structure by introducing highly-conductive porous carbon as the supporting matrix. Herein, we synthesized hybrid composites consisting of interconnected NiS-nanosheets and porous carbon (NiS@C) derived from Zeolitic-imidazolate frameworks (ZIFs) using a facile low-temperature water-bath method. When employed as electrode materials, the as-prepared NiS@C nanocomposites present remarkable electrochemical performance owing to the complex effect that is the combined advantages of double-layer capacitor-type porous carbon and pseudocapacitor-type interconnected-NiS nanosheets. Specifically, the NiS@C nanocomposites exhibit a high specific capacitance of 1827 F g⁻¹ at 1 A g⁻¹, and excellent cyclic stability with a capacity retention of 72% at a very high current density of 20 A g⁻¹ after 5000 cycles. Moreover, the fabricated hybrid supercapacitor delivers 21.6 Wh kg⁻¹ at 400 W kg⁻¹ with coulombic efficiency of 93.9%, and reaches 10.8 Wh kg⁻¹ at a high power density of 8000 W kg⁻¹, along with excellent cyclic stability of 84% at 5 A g⁻¹ after 5000 cycles. All results suggest that NiS@C nanocomposites are applicable to high-performance electrodes in hybrid supercapacitors and other energy-storage device applications.     

Self-assembly of novel cobalt iron phosphate nanoparticles for the solid-state supercapattery and high-performance hydrogen evolution reaction

In this article, we report the preparation of novel cobalt iron phosphate nanoparticles which are self-assembled for energy storage, energy conversion, and sustainability. The self-assembled nanoparticles provide an efficient pathway for the transfer of electrons from the bulk of the materials to the interface of the electrode. This hypothesis has been derived from the analysis based on the electrochemical results for the supercapacitor-based energy storage and hydrogen evolution. The electrode consisting of self-assembled nanoparticles exhibits a maximum specific capacity of 280 C g⁻¹ at a specific current of 1 A g⁻¹. The cyclic voltammetric results suggest the prominent charge storage is by the faradaic reaction which has been concluded from Dunn's approach. The supercapattery device utilizing activated carbon (AC) as the negative electrode and cobalt iron phosphate as the positive electrode exhibit a specific capacity of 210 C g⁻¹ at 2 A g⁻¹ while the specific energy of 47.6 Wh kg^-1 at 1.6 kW kg⁻¹. Furthermore, the electrode actively catalyzes the electrochemical hydrogen evolution reaction and it can be lowering the overpotential required by the hydrogen generation. It exhibits the overpotential of 197 mV while the electrode represents the long-time (24 h) consistency for hydrogen production. These results indicate that the novel cobalt iron phosphate nanoparticles could be a potential candidate for energy storage and conversion purposes.     

Simple synthesis of honeysuckle-like CuCo2O4/CuO composites as a battery type electrode material for high-performance hybrid supercapacitors

In this paper, porous CuCo₂O₄/CuO composites with novel honeysuckle-like shape (CuCo₂O₄/CuO HCs) have been prepared for the first time by a simple hydrothermal method and followed with an additional annealing process in air. The unique CuCo₂O₄/CuO HCs consisted of dense and slender petals with length of 1.3–1.5 μm and width of about 50 nm, and possessed a specific surface area of 36.09 m² g^?1 with main pore size distribution at 10.63 nm. When used as the electrode materials for supercapacitors, the CuCo₂O₄/CuO HCs exhibited excellent electrochemical performances with a high specific capacity of 350.69 C g^?1 at 1 A g^?1, a rate capability of 78.6% at 10 A g^?1, and 96.2% capacity retention after 5000 cycles at a current density of 5 A g^?1. In addition, a hybrid supercapacitor (CuCo₂O₄/CuO HCs//AC HSC) was assembled using the CuCo₂O₄/CuO HCs as positive electrode and activated carbon (AC) as negative electrode. The HSC device delivered a specific capacity of 187.85 C g^?1 at 1 A g^?1 and a superior cycling stability with 104.7% capacity retention after 5000 cycles at 5 A g^?1, and possessed a high energy density of 41.76 W h kg^?1 at a power density of 800.27 W kg^?1. These outstanding electrochemical performances manifested the great potential of CuCo₂O₄/CuO HCs as a promising battery-type electrode material for the next-generation advanced supercapacitors with high-performance.     

Electrospun NiO/C nanofibers as electrode materials for hybrid supercapacitors with superior electrochemical performance

In this work, the porous NiO/C nanofibers (NFs) were rationally designed and prepared by a convenient electrospinning method, and followed with a calcination conversion of the precursor in air. The NiO/C composite exhibited a net-like structure that was composed of many intertwined NFs with an average diameter of about 200 nm. The electrochemical measurements demonstrated that the porous NiO/C NFs exhibited an electrochemical feature of battery-type electrode material, and delivered a specific capacity as high as 461.26 C g^?1 under 1 A g^?1 and an excellent rate capability with 82.7% capacity retention at 10 A g^?1. A hybrid supercapacitor (NiO/C NFs//AC HSC) was assembled with NiO/C NFs as positive electrode and activated carbon (AC) as negative electrode, which delivered an energy density of 31.82 W h kg^?1 under a power density of 816.36 W kg^?1 along with an outstanding cyclic stability of 90.9% capacity retention over 5000 cycles at 5 A g^?1. This simple synthetic method can be extended to the fabrication of other transition metal oxides (TMOs)-based NFs for their further applications in high-performance electrochemical energy storage devices such as hybrid supercapacitors, batteries, and so on.     

Co-precipitation synthesis of nickel cobalt hexacyanoferrate for binder-free high-performance supercapacitor electrodes

Prussian blue analogue with a typical metal-organic framework has been widely used as an electrode material in supercapacitor. In this work, nickel cobalt hexacyanoferrate (Ni₂CoHCF) was grown on nickel foam directly using a simple co-precipitation method. The as-prepared Ni₂CoHCF was tested by transmission electron microscope, scanning electron microscope, X-ray diffraction and X-ray electron energy spectrum. The results showed that Ni₂CoHCF has a unique open face-centered cubic structure. The Ni₂CoHCF was used to set an asymmetric supercapacitor directly. A series of electrochemical tests showed that Ni₂CoHCF had an excellent electrochemical performance. The specific capacitance of the supercapacitor was 585 C g⁻¹ (1300.0 F g⁻¹, 162.5 mAh g⁻¹) at the current density of 0.5 A g⁻¹. After 2000 cycles, it still maintained 85.57% of its initial specific capacitance at the current density of 10 A g⁻¹. The energy density was 30.59 Wh kg⁻¹ at the power density of 378.7 W kg⁻¹. The results show that the supercapacitor constructed by Ni₂CoHCF as an electrode material has high-current charge-discharge capacity, high energy density and long cycle life.     

Honeycomb micro/nano-architecture of stable β-NiMoO4 electrode/catalyst for sustainable energy storage and conversion devices

Multi-functionality is a highly desirable feature in designing new electrode material for both energy storage and conversion devices. Here, we report a well-integrated and stable β-NiMoO₄ that was fabricated on three dimensional (3D) nickel foam (NF) by a simple hydrothermal approach. The obtained β-NiMoO₄ with interesting honeycomb like interconnected nanosheet microstructure leads to excellent electrochemical activity. As an electrode for Supercapatteries, β-NiMoO₄–NF showed a high specific capacity of 178.2 mA h g⁻¹ (916.4 F g⁻¹) at 5 mA cm⁻² current density. Most importantly, the fabricated symmetric device exhibits a maximum specific energy of 35.8 W h kg⁻¹ with the power output of 981.56 W kg^-1 and excellent cyclic stability. In methanol electro-oxidation, the β-NiMoO₄ –NF catalyst deliver the high current density of 41.8 mA cm⁻² and much lower onset potential of 0.29 V with admirable long term stability. Apart from the above electrochemical activity, the β-NiMoO₄ –NF honeycomb microstructure demonstrates a promising non-noble electrocatalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) and showed a considerable overpotential of 351 mV (OER) and 238 mV (HER). The attractive multifunctional electrochemical activity of β-NiMoO₄–NF could be originates from their unique honeycomb micro/nano structure which can acts as an “ion reservoir” and thus leads to superior energy storage and conversion processes.