Ir-doped Co3O4 as efficient electrocatalyst for acidic oxygen evolution reaction

Oxygen evolution reaction (OER) is an important bottleneck for large-scale acidic water splitting applications due to its sluggish reaction kinetics. Therefore, the development of highly active, stable, and inexpensive electrocatalysts for OER remains a challenge. Herein, we develop the iridium doped Co₃O₄ (Ir–Co₃O₄) with low Ir content of 2.88 wt% for efficient acidic OER. Considering systemic characterizations, it is probably concluded that Ir can be uniformly doped into the lattice of Co₃O₄ and induce a certain distortion. The electrochemical results reveal that Ir–Co₃O₄ nanoparticles demonstrate significantly enhanced electrocatalytic OER activity and stability in 0.5 M H₂SO₄ solution compared with pure Co₃O₄, in which the overpotential at the current density of 10 mA cm⁻² decreases from 382 mV to 225 mV and the value of Tafel slope decreases from 101.7 mV dec⁻¹ to 64.1 mV dec⁻¹. Besides, Ir–Co₃O₄ exhibits excellent electrocatalytic durability for continuous 130 h's test without any activity attenuation. Moreover, this work provides a kind of high-performance acidic OER electrocatalyst for the development of hydrogen energy.     

Fe doped metal organic framework (Ni)/carbon black nanosheet as highly active electrocatalyst for oxygen evolution reaction

To alleviate the sluggish oxygen evolution reaction (OER) kinetics, it's urgent to develop electrocatalysts with high activity and low cost. In this work, Fe doped metal organic frameworks (Ni)/carbon black composites were synthesized via a facile hydrothermal method. Benefiting from the direct use of metal organic frameworks (MOFs) for OER, numerous and highly dispersed active sites are exposed to the electrolyte and reactants. By regulating Ni/Fe ratios, a high electrochemical active surface area (ECSA) and high relative surface content of active Ni³⁺ species are obtained, which mainly contribute to the high OER activity. Besides, the introduced carbon black (CB) was found to enhance the charge-transfer efficiency of the electrocatalysts, which is also favorable for OER. The optimal Ni9Fe1-BDC-0.15CB electrocatalyst shows excellent OER activity with the low overpotential of ~290 mV at 10 mA cm⁻² and the Tafel slope of ~76.1 mV dec⁻¹, which is comparable to RuO₂ and other MOFs-based OER electrocatalysts reported in recent years.     

Autologous growth of Fe-doped Ni(OH)2 nanosheets with low overpotential for oxygen evolution reaction

Highly active and durable electrocatalysts for oxygen evolution reaction (OER) play a vital role in water splitting. Despite numerous efforts, the strategies to prepare durable and effective electrocatalysts via scalable methods still remain a great challenge. In this work, we fabricated Fe-doped Ni(OH)₂ ultrathin nanosheets (Fe–Ni–OH/Ni) via autologous growing of Ni(OH)₂ from Ni foam, and in situ electrochemical-assisted doping Fe into Ni(OH)₂. Benefiting from the unique structure with large surface areas and strong coupling effects between Fe and Ni, the optimal Fe–Ni–OH electrodes exhibit remarkable catalytic performance toward OER, which requires an overpotential of 220 mV to achieve a current density of 10 mA cm⁻² with a Tafel slope of 48.3 mV dec⁻¹. The Fe–Ni–OH electrodes also possess high stability even under a high current density of 500 mA cm⁻² for 600 h with an ultralow overpotential of 290 mV. Using Ni–Fe–OH electrodes as both anode and cathode for overall water splitting, only a small overpotential of 1.57 V is required to reach a current density of 10 mA cm⁻². Moreover, the high catalytic performance and scalable preparation method can meet the emergency needs for the practical application.     

Se-doped cobalt oxide nanoparticle as highly-efficient electrocatalyst for oxygen evolution reaction

Electrolysis of water has been one of the most promising approaches for renewable energy resources while the efficient oxygen evolution reaction (OER) remains challenging. Herein, a series of different ratio of Se doped Co₃O₄ nanoparticles XSe-Co₃O₄ are prepared by hydrothermal method and applied as OER electrocatalysts. Se^2? is doped into the Co₃O₄ crystal lattice by substituting of O^2? and a large number of oxygen vacancies are generated, which provides more available activity sites for OER. Se doping increases the surface ratio of Co²⁺/Co³⁺ and accelerates the electron transport that favors OER activity promotion. The optimized doping ratio of 6%Se–Co₃O₄ presents low overpotential of 281 mV at 10 mA cm^?2, as well as a low Tafel slope of 70 mV dec^?1 in 1 M KOH solution, which has great advantages compared to the recently reported Co₃O₄-based OER electrocatalysts. This work provides new ideas for the development of efficient Co₃O₄-based OER electrocatalysts.     

Vanadium nitride based CoFe prussian blue analogues for enhanced electrocatalytic oxygen evolution

The development of efficient and stable nonprecious-metal catalysts remains a challenge for electrochemical water oxidation in practical applications. Prussian blue analogues (MM′-PBAs, A_xM_y [M′ (CN)₆]_z·nH₂O: A = alkali metal; M/M’ = transition metals), as a kind of potential electrocatalyst candidate for oxygen evolution reaction (OER), are rarely studied. Herein, by a facile coprecipitation method, CoFe–PBAs were in-situ grown on the surface of highly conductive vanadium nitride (VN) particles. The hybrid CoFe–PBAs/VN achieves the amelioration of the poor conductivity of bare CoFe–PBAs and the increase in the density of Co²⁺ active sites due to electron interaction. Compared with bare CoFe–PBAs (overpotential of 398 mV at 10 mA cm⁻² and Tafel slope of 78.35 mV dec⁻¹), the CoFe–PBAs/VN manifests a remarkably enhanced electrocatalytic activity for OER (lower overpotential of 290 mV at 10 mA cm⁻² and a smaller Tafel slope of 39.72 mV dec⁻¹), which is superior among PBAs and PBAs-derived materials reported as electrocatalysts for OER. Besides, this hybrid material behaves an excellent long-term durability. High conductivity of VN and electron interaction between VN and CoFe–PBAs contribute to the promoted catalytic performance. This study provides a novel strategy using VN substrates to support PBAs-based catalysts so as to obtain highly active and stable electrocatalysts towards practical applications.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Carbon nanorod supported metal alloy nanocubes using polydopamine as location reagent for water splitting

Transition metal catalysts were supposed to be the most likely substitute for commercial noble metal catalysts, and the development of highly active and long-term catalyst for water splitting are the future trend. Herein, Ni rectangular nitrogen doped carbon nanorods@Fe–Co nanocubes (Ni-CNRs@Fe–Co cubes) were fabricated via a facile template-free method. This simple strategy not only realizes the structure tailoring, but also achieves high-quality nitrogen-doping. Specifically, nickel dimethylglyoxime [Ni(dmg)₂] with rectangular rodlike structure was firstly synthesized by solution method, then metal-organic frameworks Fe–Co nanocube with different contents were loaded on rectangular carbon nanorods with polydopamine as the locating and the connecting agent, and finally Ni-CNRs@xFe-Co cubes were obtained by a one-step calcination. A series of electrochemical tests were researched on materials with different metal contents in the 1 M KOH solution. The Ni-CNRs@Fe–Co cubes show excellent electrocatalytic activity in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). For HER and OER, the Tafel slopes were 83.3 mV dec⁻¹ and 71 mV dec⁻¹, the onset potential were −167 mV and 1.62 V, and reached the current densities of 10 mA cm⁻², the overpotential just needed 196 mV and 433 mV, respectively. This novel synthetic strategy will provide a template-free way for cheap electrocatalysts of non-precious metal for OER and HER.     

Engineering bimetallic cactus-like NiFeOOH/CoNiSe2 heterostructure nanosheets for efficient oxygen evolution and overall water splitting

The development of structural stable, high-performance, inexpensive electrocatalysts for oxygen evolution reactions (OER) is essential to alleviate the energy crisis. Herein, cactus-like CoNiSe₂ was synthesized on nickel foam and NiFeOOH was electrodeposited on surface of CoNiSe₂ to form a core-shell structural electrode. The obtained NiFeOOH/CoNiSe₂/NF exhibited ultra-low overpotentials of 204 mV and 234 mV at 10 and 100 mA cm⁻², with a Tafel slope of 26.2 mV dec⁻¹ in 1 M KOH alkaline solution. Furthermore, the current density only decreased by 5% after a 100 h durability test at 200 mA cm⁻², showing excellent robust stability. A two-electrode system with NiFeOOH/CoNiSe₂/NF as anode and Ni/NiO@MoO_3-x/NF as cathode (NiFeOOH/CoNiSe₂/NF||Ni/NiO@MoO_3-x/NF) showed a low voltage of 1.47/1.56 V to deliver 10/100 mA cm⁻². According to the experimental and density functional theory (DFT) results, the strong electronic interactions at the NiFeOOH/CoNiSe₂/NF interface leads to an increase in the valence state of Fe and an optimisation of the adsorption free energy, which are favourable to reduce the energy consumption of the OER. This work obtained high performance OER electrocatalysts by engineering amorphous and crystalline heterointerfaces and structural design, which will provide some inspiration for similar work.     

One-pot preparation of Ni3S2@3-D graphene free-standing electrode by simple Q-CVD method for efficient oxygen evolution reaction

Efficient non-noble metal catalysts for the oxygen evolution reaction (OER) are particularly important in the practical applications of electrocatalytic water splitting (ECWS). Herein, based on a simple quasi chemical vapor deposition (Q-CVD) method, we fabricate a newly Ni₃S₂@3-D graphene free-standing electrode for efficient OER applications. The Ni₃S₂@3-D graphene integrates the advantageous features of 3-D graphene and Ni₃S₂ towards OER, such as more interfacial catalytic sites, pore-rich structure, N-doped structure and good electrical conductivity. Benefiting from the favorable features, the Ni₃S₂@3-D graphene (especially 900 °C sample) exhibits excellent OER performances in alkaline medium, which includes a low on-set potential (1.53 V), low overpotential of 305 mV at a current density of 10 mA cm⁻², and a smaller Tafel slope (50 mV dec⁻¹). This catalyst also shows ultrahigh stability after chronoamperometry response at 10 mA cm⁻² for 48 h with 30% increase in the current density. The present work opens a new approach for the one-pot construction of hybrid materials between metal sulfide and graphene to increase the electrocatalytic activity of non-noble metal OER catalysts.     

In situ construction of heterostructure NiSe–NiO nanoarrays with rich oxygen vacancy on MXene for efficient oxygen evolution

Developing high-efficiency, non-noble, earth-available electrocatalysts for the oxygen evolution reaction (OER) is vital for electrochemical energy conversion, but it is still challenging. Herein, we ingeniously designed a partial selenization method to construct NiSe–NiO heterostructure grown in situ on Ta₄C₃T_x MXene (denoted as NiSe–NiO/Ta₄C₃T_x MXene). NiSe–NiO/Ta₄C₃T_x MXene's plethora of heterointerfaces provides a wealth of active sites, fast charge and mass transfer, and favorable adsorption energies for OER intermediates, all of which contribute synergistically to the oxidation of alkaline water. As expected, taking advantage of the strong chemical and electron synergistic effects of NiSe and NiO, the synthesized NiSe–NiO/Ta₄C₃T_x MXene exhibits excellent activity for OER with a low overpotential of 255 mV at 10 mA cm⁻², a small Tafel slope of 47.4 mV dec⁻¹, as well as excellent long-term stability, exceeding that of its competitors. This study offers a novel synthetic route toward developing high-performance OER electrocatalysts for renewable energy conversion/storage systems and beyond by optimizing the catalysts' composition and architecture.     

Comparison of hydrothermal and electrodeposition methods for the synthesis of CoSe2/CeO2 nanocomposites as electrocatalysts toward oxygen evolution reaction

Promoting efficacious and low-cost catalysts for the oxygen evolution reaction (OER), as the sluggish half-reaction of the water splitting, is inevitable to make sustainable energy technologies more promising. In this work, we report a series of novel nanocomposites comprising CeO₂ nanorods decorated with CoSe₂ nanoparticles. The nanocomposites were prepared via a conventional hydrothermal synthesis or a rapid electrodeposition process, and their structure, morphology, and electrochemical performance toward OER in alkaline solution were compared. To tune the electrocatalytic activity, the mass ratio of CoSe₂ to CeO₂ was systematically varied. Compared with the hydrothermal synthesis, the much faster electrodeposition method yielded a nanocomposite with a similar or slightly better performance in OER. This nanocomposite exhibited an overpotential of 290 mV (at 10 mA cm^?2 current density), a Tafel slope of 53 mV dec^?1, and excellent electrochemical stability for 15 h. Overall, these findings demonstrate the great potential of CoSe₂/CeO₂ nanocomposites as effective OER electrocatalysts for future applications.     

Cobalt phosphide nanoparticles embedded in 3D N-doped porous carbon for efficient hydrogen and oxygen evolution reactions

An electrocatalyst based on a unique three-dimensional (3D) N-doped porous carbon sheet networks embedded with CoP₂ nanoparticles (CoP₂@3D-NPC) was synthesized by a facile pyrolysis process as well as an in-situ phosphatization method. The improved CoP₂@3D-NPC hybrid materials show excellent electrocatalytic activity toward HER and OER. This material provides a low overpotential of 126 mV at 10 mA cm⁻² in 0.5 M H₂SO₄ and 167 mV at 20 mA cm⁻² in 1.0 M KOH for HER with a small Tafel slope value of 59 mV dec⁻¹, respectively. Besides, it is also active for the OER under alkaline conditions. Such a prominent property of the CoP₂@3D-NPC electrocatalyst could be attributed to its excellent electrical conductivity of 3D carbon substrate, strong synergistic effect between CoP₂ nanoparticles and carbon nanosheet as well as extra active sites created by the N-doped structure.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Hexagonal CoFe2O4/β-Ni(OH)2 heterojunction composite as an advanced electrocatalyst for the oxygen evolution reaction

Transition metal-based heterostructure materials are considered as promising alternatives to state-of-the-art noble metal-based catalysts toward the oxygen evolution reaction (OER). Herein, for the first time, a simple interface engineering strategy is presented to synthesize efficient electrocatalysts based on a novel CoFe₂O₄/β-Ni(OH)₂ heterogeneous structure for the electrochemical OER. Remarkably, the optimized CoFe₂O₄/β-Ni(OH)₂ electrocatalyst, benefiting from its hierarchical hexagonal heterostructure with strong electronic interaction, enhanced intrinsic activity, and electrochemically active sites, exhibits outstanding OER electrocatalytic performance with a low overpotential of 278 mV to reach a current density of 10 mA cm⁻², a small Tafel slope of 67 mV dec⁻¹, and long-standing durability for 30 h. Its exceptional OER performance makes the CoFe₂O₄/β-Ni(OH)₂ heterostructure a prospective candidate for water oxidation in alkaline solution. The proposed interface engineering provides new insights into the fabrication of high-performance electrocatalysts for energy-related applications.     

Defective layered double hydroxide formed by H2O2 treatment act as highly efficient electrocatalytic for oxygen evolution reaction

Electrocatalytic reaction is the important electrode reaction for many new generation electrochemistry energy and storage devices. However, the poor reaction kinetics of those electrode reaction severely restricts its application. Highly efficient electrocatalyst is essential to resolve the problem of commercial application of those electrochemistry energy and storage devices. Herein, by simple H₂O₂ treatment, the highly efficient CoFe-Layered Double Hydroxides (LDHs) electrocatalysts with multiple defects have been synthesized (noted as D-LDHs). The D-LDHs show a low overpotential of 283 mV at 10 mA cm⁻² and small Tafel slope of 39 mV dec⁻¹ for the oxygen evolution reaction (OER). The work offers a new strategy to create defects in LDHs as highly efficient electrocatalysts for OER.     

Mesoporous nickel-sulfide/nickel/N-doped carbon as HER and OER bifunctional electrocatalyst for water electrolysis

The development of non-precious metal-based highly active bi-functional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is critical factor for making water electrolysis a viable process for large-scale industrial applications. In this study, bi-functional water splitting electrocatalysts in the form of nickel-sulfide/nickel nanoparticles integrated into a three-dimensional N-doped porous carbon matrix, are prepared using NaCl as a porous structure-forming template. Microstructures of the catalytic materials are characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and N₂ adsorption-desorption analysis. The most active catalyst synthesized in this study exhibits a low HER overpotential of 70 mV at 10 mA cm⁻² and a low Tafel slope of 45 mV dec⁻¹. In OER, the optimized sample performs better than a state-of-the-art RuO₂ catalyst and produces an overpotential of 337 mV at 10 mA cm⁻², lower than that of RuO₂. The newly obtained materials are also used as HER/OER electrocatalysts in a specially assembled two-electrode water splitting cell. The cell demonstrates high activity and good stability in overall water splitting.     

Tailoring Cr doped NiFeP nanoparticles embedded in 3D cellulose nanofibrils carbon architecture for efficient oxygen evolution reaction

Oxygen evolution reaction (OER) is considered the bottleneck that restricting the pace of electrocatalytic hydrogen production. Modulating structure and heterogeneous doping are essential approaches to effectively promote the electrocatalytic efficiency and stability. Herein, three-dimensional (3D) porous Cr doped NiFeP nanoparticles encapsulated in cellulose nanofibrils (CNF) carbon architecture (Cr–NiFeP/NC) with high-efficiency and durable OER performance was constructed. CNF played crucial role on the construction of 3D porous framework and promoting the OER performance significantly. Benefiting from the 3D porous structure, high specific surface area and exposed abundant active sites, the Cr–NiFeP/NC electrocatalyst displayed excellent OER performance, which the overpotential to deliver the current density of 10 mA cm⁻² was only 249 mV with a Tafel slope of 51.2 mV dec⁻¹ in 1.0 M KOH, outperforming the RuO₂ and other reported electrocatalysts remarkably. In addition, the Cr–NiFeP/NC electrocatalyst exhibited outstanding stability, which the overpotential was only increased by 2.5% after 48 h chronopotential measurement to deliver a current density of 10 mA cm⁻² with stable morphology and structure. This work demonstrated an integrated strategy of Cr doping and 3D porous structure modulating employed CNF as skeleton for the efficient and durable OER performance, providing a spark for hydrogen production by water splitting.     

In situ grown Cu-Based metal-organic framework on copper foam as high-performance electrocatalysts for oxygen evolution reaction

It is of great significance to develop highly efficient and robust oxygen evolution reaction (OER) electrocatalysts derived from earth-abundant and inexpensive elements for future hydrogen economy via electrochemical water splitting. Herein, Cu-based metal-organic framework (MOF) is directly supported on conductive Cu foam (CF) by a simply chemical oxidation of Cu substrate to grow Cu(OH)₂ nanowire arrays, followed by solvothermal treatment to obtain in situ grown Cu-based MOF electrode (MOF [Cu(OH)₂]/CF). The as-prepared 3D electrode shows superior OER activity with a low potential of 330 mV to deliver a current density of 10 mA cm⁻², a Tafel slope of 108 mV dec⁻¹, and excellent durability in alkaline media (1.0 M KOH). After electrolysis, XRD confirms that the initial MOFs have been transformed into CuO species, which are essentially active components for OER performance. This demonstrates that the MOFs can serve as efficient precursors for formation of highly active Cu oxide catalysts towards OER. This work provides a new strategy to develop MOFs-derived electrocatalysts for future clean energy conversion and storage systems.     

Surface engineering of 2D MOF to construct high-density Co9S8 nanoparticles supported on nitrogen doped carbon for efficient oxygen evolution reaction

Transition metal sulfides and their hybrids are promising alternative to precious metal catalyst for the oxygen evolution reaction (OER). Herein, the high-density Co₉S₈ nanoparticles (NPs) embedded in N-doped carbon has been prepared by using surface-engineered zeolitic imidazolate framework-9 (ZIF-9) nanosheets as precursor. The surface of ZIF-9 was modified with TAA, which is able to create chemical barrier and prevents metal from aggregation in the subsequent pyrolysis, thus making small Co₉S₈ NPs densely anchored on carbon layers. Arising from the unique structure, Co₉S₈@NC affords an optimized electronic structure and rich effective reactive sites for OER. As expected, Co₉S₈@NC exhibits small overpotential of 264 mV at 10 mA cm⁻², low Tafel slope of 68.4 mV dec⁻¹, and superior stability for alkaline OER (0.1 M KOH). The electrolysis cell, which was equipped with Co₉S₈@NC cathode and Pt/C anode, shows low water splitting voltage of 1.58 V at 10 mA cm⁻² in 1.0 M KOH. This work employs an efficacious surface engineering strategy to design metal sulfide-based electrocatalysts for enhancing OER performance.     

Mesoporous spinel NiFe oxide cubes as advanced electrocatalysts for oxygen evolution

Oxygen evolution reaction (OER) is the rate-controlling step of the electrochemical water splitting. The slow kinetics hinders large-scale H₂ production. Herein, the spinel NiFe oxides were prepared by directly pyrolyzing nickel hexacynoferrate precursors in air. The NiFe oxides were presented as mesoporous nanocubes with a specific surface area of 125 m² g⁻¹. The mesoporous spinel NiFe oxide nanocubes can afford a geometric current of 10 mA cm⁻² at a low overpotential of a 0.24 V and a small Tafel slope of 41 mV dec⁻¹ in alkaline solution. The specific activity can reach up to 0.37 mA cm⁻² with a turnover frequency of 0.93 s⁻¹. The superior OER activity of the NiFe oxide nanocubes (NiFeO NCs) can outperform those of the state-of-the-art IrO₂ catalysts, and compare favorably with other spinel transition metal oxides reported recently under identical condition. NiFeO NCs also show a long-term durability without significant loss of the OER activity. Our works provide a new strategy to develop efficient, robust and earth-abundant spinel NiFe oxides as advanced OER electrocatalysts to replace the expensive commercial IrO₂ catalysts for water splitting in the industrial scale.