Hydrogen storage capacity and reversibility of Li-decorated B4CN3 monolayer revealed by first-principles calculations

This work explored the feasibility of Li decoration on the B₄CN₃ monolayer for hydrogen (H₂) storage performance using first-principles calculations. The results of density functional theory (DFT) calculations showed that each Li atom decorated on the B₄CN₃ monolayer can physically adsorb four H₂ molecules with an average adsorption energy of ?0.23 eV/H₂, and the corresponding theoretical gravimetric density could reach as high as 12.7 wt%. Moreover, the H₂ desorption behaviors of Li-decorated B₄CN₃ monolayer at temperatures of 100, 200, 300 and 400 K were simulated via molecular dynamics (MD) methods. The results showed that the structure was stable within the prescribed temperature range, and a large amount of H₂ could be released at 300 K, indicative of the reversibility of hydrogen storage. The above findings demonstrate that the Li-decorated B₄CN₃ monolayer can serve as a favorable candidate material for high-capacity reversible hydrogen storage application.     

A novel lithium decorated N-doped 4,6,8-biphenylene for reversible hydrogen storage: Insights from density functional theory

Two-dimensional (2D) carbon-based (C-based) and carbon-nitrogen (C–N) materials have great potential in the energy harvest and storage fields. We investigate a novel carbon biphenylene (C468) consisting of four-, six- and eight-membered rings of sp² carbon atoms (Fan et al., Science, 372:852-6 (2021)) for hydrogen storage. Using first-principles based Density functional theory calculations, we study the geometrical and electronic properties of C468 and N-doped C468. Lithium (Li) atoms were symmetrically adsorbed on both sides of the substrate, and their adsorption positions were determined. The maximum gravimetric density of hydrogen (H₂) adsorbed symmetrically on both sides of Li atom was studied within the scope of physical adsorption process (−0.2 eV/H₂ ∼ −0.6 eV/H₂). Li-decorated C468 can adsorb 8 upper hydrogen molecules and 8 lower hydrogen molecules, and Li-decorated N-doped C468 can adsorb 9 upper hydrogen molecules and 9 lower hydrogen molecules. The gravimetric densities of Li-decorated C468 and Li-decorated N-doped C468 can reach 9.581 wt% and 10.588 wt%, respectively. Our findings suggest significant insights for using Li-decorated C468 and Li-decorated N-doped C468 as hydrogen storage candidates and effectively expand the application scope of C-based materials and C–N materials.     

Stabilized Li-decoration and enhanced hydrogen storage on reduced graphene oxides

Hydrogen storage properties of Li-decorated graphene oxides containing epoxy and hydroxyl groups are studied by using density functional theory. The Li atoms form Li₄O/Li₃OH clusters and are anchored strongly on the graphene surface with binding energies of −3.20 and −2.84 eV. The clusters transfer electrons to the graphene substrate, and the Li atoms exist as Li⁺ cations with strong adsorption ability for H₂ molecules. Each Li atom can adsorb at least 2H₂ molecules with adsorption energies greater than −0.20 eV/H₂. The hydrogen storage properties of Li-decorated graphene at different oxidation degrees are studied. The computations show that the adsorption energy of H₂ is −0.22 eV/H₂ and the hydrogen storage capacity is 6.04 wt% at the oxidation ratio O/C = 1/16. When the O/C ratio is 1:8, the storage capacity reaches 10.26 wt% and the adsorption energy is −0.15 eV/H₂. These results suggest that reversible hydrogen storage with high recycling capacities at ambient temperature can be realized through light-metal decoration on reduced graphene oxides.     

A reversible hydrogen storage material of Li-decorated two-dimensional (2D) C4N monolayer: First principles calculations

Two-dimensional (2D) materials can be regarded as potential hydrogen storage candidates because of their splendid chemical stability and high specific surface area. Recently, a new dumbbell-like carbon nitride (C₄N) monolayer with orbital hybridization of sp³ is reported. Motivated from the above exploration, the hydrogen adsorption properties of Li-decorated C₄N monolayer are comprehensively investigated via first principles calculations based on the density functional theory (DFT). It is found that the Dirac points and Dirac cones exists in the Brillouin zone (BZ) from the calculated electronic structure and indicates the C₄N can be used as an excellent topological material. Also, the calculated phonon spectra demonstrate that the C₄N monolayer owns a strong stability. Moreover, the calculated binding energy of decorated Li atom is bigger than its cohesive energy and results in Li atoms disperse over the surface of C₄N monolayer uniformly without clustering. In addition, the Li₈C₄N complex can capture up to 24H₂ molecules with an optimal hydrogen adsorption energy of −0.281 eV/H₂ and achieves the hydrogen storage density of 8.0 wt%. The ab initio molecular dynamics (AIMD) simulations suggest that the H₂ molecules can be desorbed quickly at 300 K. This study reveals that Li-decorated C₄N monolayer can be served as a promising hydrogen storage material.     

Hydrogen adsorption and storage behaviors of Li-decorated PdS2 monolayer: An extended tight-binding study based on DFT

The hydrogen adsorption and storage of the lithium-decorated PdS₂ monolayer at nano-size has been investigated by using extended tight-binding (GFN1-xTB) based on density functional theory (DFT). The calculation results demonstrate that the average adsorption energies of 1–5H₂ change in 0.47–0.20 eV/H₂ range which decreases with increasing of adsorbed hydrogen molecule number. The gravimetric density for hydrogen storage adsorption with 12Li atom and 60H₂ molecules of Li-decorated PdS₂ monolayer is about 6.98 wt% considered as possible application in hydrogen storage. The examination of the hydrogen store mechanism between the monolayer and hydrogen molecules is presented by polarization between Pd and H₂, which can be effect on the adsorption behavior.     

Density functional theory study of reversible hydrogen storage in monolayer beryllium hydride by decoration with boron and lithium

The hydrogen storage capacity of M-decorated (M = Li and B) 2D beryllium hydride is investigated using first-principles calculations based on density functional theory. The Li and B atoms were calculated to be successfully and chemically decorated on the Surface of the α-BeH₂ monolayer with a large binding energy of 2.41 and 4.45eV/atom. The absolute value was higher than the cohesive energy of Li and B bulk (1.68, 5.81eV/atom). Hence, the Li and B atoms are strongly bound on the beryllium hydride monolayer without clustering. Our findings show that the hydrogen molecule interacted weakly with B/α-BeH₂(B-decorated beryllium hydride monolayer) with a low adsorption energy of only 0.0226 eV/H₂ but was strongly adsorbed on the introduced active site of the Li atom in the decorated BeH₂ with an improved adsorption energy of 0.472 eV/H₂. Based on density functional theory, the gravimetric density of 28H₂/8li/α-BeH₂) could reach 14.5 wt.% higher than DOE's target of 6.5 wt. % (the criteria of the United States Department of Energy). Therefore, our research indicates that the Li-decorated beryllium hydride monolayer could be a candidate for further investigation as an alternative material for hydrogen storage.     

A density functional theory and grand canonical Monte Carlo simulations study the hydrogen storage on the Li-decorated net-τ

To find ideal hydrogen storage media, hydrogen storage performance of Li decorated net-τ has been investigated by first-principles calculations. Maximum 6 Li atoms are adsorbed on net-τ, with the average binding energy of 2.15 eV for per Li atom. Based on 6Li-decorated net-τ, up to twenty H₂ molecules are adsorbed, with a high H₂ storage capacity of 12.52 wt% and an appropriate adsorption energy of 0.21 eV/H₂. Finally, H₂ uptake performance is measured by GCMC simulations. Our results suggest that Li-decorated net-τ may be a promising hydrogen storage medium under realistic conditions.     

Li-decorated graphyne as high-capacity hydrogen storage media: First-principles plane wave calculations

Taking into account the van der Waals correction, the characteristics of the Li-decorated graphyne as the hydrogen storage medium have been explored using first-principles plane wave calculations. We find that Li atom can be adsorbed not only over the center of large hexagon (H_L site) but also over the center of small hexagon (H_S site). For double-side Li decorations, there are 14H₂ molecules can be adsorbed on Li-decorated graphyne primitive cell with the adsorption energy of 0.19 eV/H₂. As a result, the hydrogen storage capacity of 13.0 wt% can be obtained. This suggests that the Li-decorated graphyne system can serve as a high-capacity hydrogen storage medium.     

Hydrogen storage properties of Li-decorated B2S monolayers: A DFT study

Hydrogen storage properties of Li functionalized B₂S honeycomb monolayers are studied using density functional theory calculations. The binding of H₂ molecules to the clean B₂S sheet proceeds through physisorption. Dispersed Li atoms on the monolayer surface increase both the hydrogen binding energies and the hydrogen storage capacities significantly. Additionally, ab initio molecular dynamics calculations show that there is no kinetic barrier during H₂ desorption from lithiated B₂S. Among the studied B₈S₄Li_x (x = 1, 2, 4, and 12) compounds, the B₈S₄Li₄ is found to be the most promising candidate for hydrogen storage purposes; with a 9.1 wt% H₂ content and 0.14 eV/H₂ average hydrogen binding energy. Furthermore, a detailed analysis of the electronic properties of the B₈S₄Li₄ compound before and after H₂ molecule adsorption confirms that the interactions between Li and H₂ molecules are of electrostatic nature.     

Computational insights of alkali metal (Li / Na / K) atom decorated buckled bismuthene for hydrogen storage

The mechanism of hydrogen molecule adsorption on 2D buckled bismuthene (b-Bi) monolayer decorated with alkali metal atoms was studied using density functional theory based first principles calculations. The decorated atoms Li, Na and K exhibited distribution on surface of b-Bi monolayer with increasing binding energy of 2.6 eV, 2.9 eV and 3.6 eV respectively. The adsorption of H₂ molecule on the slabs appeared stable which was further improved upon inclusion of van der Waals interactions. The adsorption behaviour of H₂ molecules on the decorated slabs is physisorption whereas the slabs were able to bind up to five H₂ molecules. The average adsorption energy per H₂ molecules are in range of 0.1–0.2 eV which is good for practical applications. The molecular dynamics simulation also confirmed the thermodynamic stabilities of five H₂ molecules adsorbed on the decorated slabs. The storage capacity values are found 2.24 wt %, 2.1 wt %, and 2 wt %, for respective cases of Li, Na and K atoms decorated b-Bi. The analysis of the adsorbed cases pointed to electrostatic interaction of Li and H₂ molecule. The adsorption energies, binding energies, charge analysis, structural stability, density of states, and hydrogen adsorption percentage specifies that the decorated b-Bi may serve as an efficient hydrogen storage material and could be an effective medium to interact with hydrogen molecules at room temperature.     

Li-decorated Pmmn8 phase of borophene for hydrogen storage. A van der Waals corrected density-functional theory study

We performed standard and van der Waals-corrected density functional theory calculations to investigate the hydrogen storage capacity of a phase of borophene with Pmmn symmetry and nonzero thickness. This borophene sheet (Pmmn8) has 8 atoms in its unit cell and is more stable than the planar α sheet and that the corrugated Pmmn2 sheet (2 atoms in the unit cell). Our results show that, in pristine form, the Pmmn8 sheet is not suited for hydrogen storage applications. However, decoration with Li atoms and strain increase the hydrogen storage ability of the sheet. We performed also a detailed quantum chemical topological analysis that shows that the BLi interaction in the hydrogenated Li-decorated Pmmn8 sheet is ionic. Our results for the adsorption of H₂ on the Li-decorated Pmmn8 sheet are compared with those obtained for the adsorption of H₂ on Ti-decorated zigzag graphene nanoribbons.     

First-principles study of superior hydrogen storage performance of Li-decorated Be2N6 monolayer

The potential application of pristine Be₂N₆ monolayer and Li-decorated Be₂N₆ monolayer for hydrogen storage is researched by using periodic DFT calculations. Based on the obtained results, the Be₂N₆ monolayer gets adsorb up to seven H₂ molecules with an average binding energy of 0.099 eV/H₂ which is close to the threshold energy of 0.1 eV required for practical applications. Decoration of the Be₂N₆ monolayer with lithium atom significantly improves the hydrogen storage ability of the desired monolayer compared to that of the pristine Be₂N₆ monolayer. This can be attributed to the polarization of H₂ molecules induced by the charge transfer from Li atoms to the Be₂N₆ monolayer. Decoration of Be₂N₆ monolayer with two lithium atoms gives a promising medium that can hold up to eight H₂ molecules with average adsorption energy of 0.198 eV/H₂ and hydrogen uptake capacities of 12.12 wt%. The obtained hydrogen uptake capacity of 2Li/Be₂N₆ monolayer is much higher than the target set by the U.S. Department of Energy (5.5 wt% by 2020). Based on the van't Hoff equation, it is inferred that hydrogen desorption can occur at T_D = 254 K for 2Li/Be₂N₆ (8H₂) system which is close to ambient conditions. This is a remarkable result indicating important practical applications of 2Li/Be₂N₆ medium for hydrogen storage purposes.     

Li decorated heteroborospherene C4B32 as high capacity and reversible hydrogen storage media: A DFT study

In this work, adsorption of H₂ molecules on heteroborospherene C_2v C₄B₃₂ decorated by alkali atoms (Li) is studied by density functional theory calculations. The interaction between Li atoms and C₄B₃₂ is found to be strong, so that it prevents agglomeration of the former. An introduced hydrogen molecule tilts toward the Li atoms and is stably adsorbed on C₄B₃₂. It is obtained that Li₄C₄B₃₂ can store up to 12H₂ molecules with hydrogen uptake capacity of 5.425 wt% and average adsorption energy of ?0.240 eV per H₂. Dynamics simulation results show that 6H₂ molecules can be successfully released at 300 K. Obtained results demonstrate that Li decorated C₄B₃₂ is a promising material for reversible hydrogen storage.     

An investigation of Li-decorated N-doped penta-graphene for hydrogen storage

By making use of first principles calculations, lithium-decorated (Li-decorated) and nitrogen-doped (N-doped) penta-graphene (PG) was investigated as a potential material for hydrogen storage. The geometric and electronic structures of two types of N-doped PG were studied, and the band gaps were 1.86 eV and 2.06 eV, respectively, depending on the positions of the substitution. The probable adsorption sites for Li atoms on topside and downside were calculated. Hydrogen molecules were added one by one to Li-decorated N-doped PG to research the maximum hydrogen gravimetric density. It is found that up to 5 hydrogen molecules on topside and 8 hydrogen molecules on downside can be adsorbed around a Li atom, and the average adsorption energies are in the range of physical adsorption processes (0.1–0.4 eV). The gravimetric densities can reach 7.88 wt% for N-doped PG with Li decoration. Our results suggest that Li-decorated N-doped PG is a significantly promising material for hydrogen storage.     

High-capacity hydrogen storage in Li-decorated (AlN)n (n = 12, 24, 36) nanocages

The capability of Li-decorated (AlN)_n (n = 12, 24, 36) nanocages for hydrogen storage has been studied by using density functional theory (DFT) with the generalized gradient approximation (GGA). It is found that each Al atom is capable of binding one H₂ molecule up to a gravimetric density of hydrogen storage of 4.7 wt% with an average binding energy of 0.189, 0.154, and 0.144 eV/H₂ in the pristine (AlN)_n (n = 12, 24, 36) nanocages, respectively. Further, we find that Li atoms can be preferentially decorated on the top of N atoms in (AlN)_n (n = 12, 24, 36) nanocages without clustering, and up to two H₂ molecules can bind to each Li atom with an average binding energy of 0.145, 0.154, 0.102 eV/H₂ in the Li_n(AlN)_n (n = 12, 24, 36) nanocages, respectively. Both the polarization of the H₂ molecules and the hybridization of the Li-2p orbitals with the H-s orbitals contribute to the H₂ adsorption on the Li atoms. Thus, the Li-decorated (AlN)_n (n = 12, 24, 36) nanocages can store hydrogen up to 7.7 wt%, approaching the U.S. Department of Energy (DOE) target of 9 wt% by the year 2015, and the average binding energies of H₂ molecules lying in the range of 0.1–0.2 eV/H₂ are favorable for the reversible hydrogen adsorption/desorption at ambient conditions. It is also pointed out that when allowed to interact with each other, the agglomeration of Li-decorated (AlN)_n nanocages would lower the hydrogen storage capacity.     

Two-dimensional B7P2: Dual-purpose functional material for hydrogen evolution reaction/hydrogen storage

It is well known that the development of dual-purpose materials is more significant and valuable than single-use materials due to the diversity of their use purposes. Based on density functional theory (DFT), the hydrogen evolution/hydrogen storage characteristics of two-dimensional (2D) B₇P₂ monolayer are systematically studied in this paper, focusing on the key word of clean energy-“hydrogen”. The results show that the B₇P₂ monolayer can be used as a stable metal-free decorated catalyst for hydrogen evolution reaction (HER), which is renewable and environmentally friendly. The calculated Gibbs free energy (ΔG_H1) is 0.06 eV, which is comparable or even better than that of Pt catalyst (ΔG_H1 = ?0.09 eV). In addition, we also found that the increase of hydrogen coverage and strain driving (?2%–2%) did not further enhance the HER activity of B₇P₂ monolayer, showing a poor ΔG_H1. In the aspect of hydrogen storage, we have investigated the hydrogen storage performances of alkali-metal (Li, Na and K) doped B₇P₂. It is found that in the fully loaded case, B₇P₂Li₆ is a promising hydrogen storage material with a 7.5 wt% H₂ content and 0.15 eV/H₂ average hydrogen adsorption energy (E_ave). Moreover, ab initio molecular dynamics (AIMD) calculations show that there is no dynamic barrier for H₂ desorption of Li-decorated B₇P₂ monolayer. In conclusion, our results indicate that the B₇P₂ monolayer is not only an excellent catalyst for HER, but also a promising hydrogen storage medium.     

Li-decorated double vacancy graphene for hydrogen storage application: A first principles study

Lithium decoration is an effective strategy for improving the hydrogen adsorption binding energy and the storage capacity in carbon nanostructures. Here, it is shown that Li-decorated double carbon vacancy graphene (DVG) can be used as an efficient hydrogen storage medium by means of Density Functional Theory (DFT) based calculations. The Li binding energy in DVG is 4.04 eV, which is much higher than that of pristine graphene. A maximum of four hydrogen molecules adsorb on Li decorated on one side of DVG and this leads to a gravimetric storage capacity of 3.89 wt% with an average adsorption binding energy of 0.23 eV/H₂. When Li is decorated on both sides of DVG, the gravimetric storage capacity reaches 7.26 wt% with a binding energy of 0.26 eV/H₂ which shows that desorption would take place at ambient conditions.     

Enhancement of hydrogen storage capacity on co-functionalized GaS monolayer under external electric field

Hydrogen storage properties of co-functionalized 2D GaS monolayer have been systematically investigated by first-principles calculations. The strength of the binding energy of hydrogen (H₂) molecules to the pristine GaS surface shows the physisorption interactions. Co-functionalized GaS sheet by Li, Na, K and Ca atoms enhanced the capacity of binding energies of hydrogen and strength of hydrogen storage considerably. Besides, DFT calculations show that there is no structural deformation during H₂ desorption from co-functionalized GaS surface. The binding energies of per H₂ molecules is found to be 0.077 eV for pristine GaS surface and 0.064 eV–0.37 eV with the co-functionalization of GaS surface. Additionally, in the presence of applied external electric field enhanced the strength of binding energies and it is found to be 0.09 eV/H₂ for pristine GaS case and 0.19 eV/H₂ to 0.38 eV/H₂ for co-functionalized GaS surface. Among the studied GaS monolayer is found to be the superior candidate for hydrogen storage purposes. The theoretical studies suggest that the electronic properties of the 2D GaS monolayer show the electrostatic behavior of hydrogen molecules which confirms by the interactions between adatoms and hydrogen molecules before and after hydrogen adsorption.     

The enhancement of hydrogen storage capacity in Li,Na and Mg-decorated BC3 graphene by CLICH and RICH algorithms

New hydrogen adsorption states on Li, Na, and Mg-decorated graphene-type BC₃ sheet have been investigated by first-principles calculations. The structural, electronic and binding properties, metal binding and nH₂ (n = 1–10) adsorption states of these systems are studied in detail with the Mulliken analysis, charge density differences, and partial density of states. To enhance the number of the adsorbed H₂ molecules per metal atom, and also to generate the better initial coordinates for reducing the simulation time, we present two masthematical algorithms (CLICH and RICH). The tested results on BC₃ sheet and boron-doped graphene (C₃₀B₂) show that these algorithms can increase the number of adsorbed hydrogen molecules by minimizing the computational time. It is seen that nH₂ (n = 1–10) adsorbed Li,/Na and/Mg-decorated BC₃ single- and double-sided systems are industrial materials for hydrogen storage technology, their adsorption energies fall into the acceptable adsorption energy range (0.20–0.60 eV/H₂). It is concluded from the optimized geometries and charge density differences for the higher number of H₂ adsorbed systems that not only decorated metal atom but also the sheet plays an important role in hydrogen storage process, because the boron atoms in the sheet expand the induced electric field between the adatoms and BC₃ sheet. From Mulliken analysis, there is a charge transfer mechanism between H₂ molecules and metal atoms. Moreover, the resonant peaks for the sheet, metal atoms and H₂ molecules in partial density of states curves indicate the possible hybridizations. Additionally, these adsorption processes are supported by charge density difference plots.     

Ab initio study of lithium decoration of popgraphene and hydrogen storage capacity of the hybrid nanostructure

The successful realization of extended ‘5-5-8’ line defects in graphene in a controlled way has suggested the possible formation of a new 2D carbon allotrope consisting in pentagonal-octagonal-pentagonal carbon rings. The mechanical and thermal stability of this nanostructure, called popgraphene, has recently been confirmed on the basis of first-principles calculations. Moreover, it has been proposed as a promising anode material for use in Li-ion batteries with fast charge/discharge rates. In the present paper we perform density functional theory calculations to investigate the hydrogen storage ability of popgraphene. Our calculations show that popgraphene can be decorated in a very stable way by placing Li atoms on the pentagonal carbon rings of both sides of the sheet, leaving free the octagonal carbon rings. In that condition, the Li-decorated popgraphene sheet can bind up to four H₂ molecules per unit cell, with an average adsorption energy in a range between physisorption and atomic chemisorption, which would allow for reversible hydrogen storage at moderate temperatures and pressures. Moreover, the gravimetric density of the Li-decorated popgraphene is 4.24 wt%, which is almost equal to the threshold specified by the U.S. Department of Energy for novel hydrogen-storage materials. All these results show that Li-decorated popgraphene nanostructures could be good materials for hydrogen storage.