Branched poly(ether ether ketone) based anion exchange membrane for H2/O2 fuel cell

High-performance anion exchange membranes (AEMs) are in need for practical application of AEM fuel cells. Novel branched poly(ether ether ketone) (BPEEK) based AEMs were prepared by the copolymerization of phloroglucinol, methylhydroquinone and 4,4′-difluorobenzophenone and following functionalization. The effects of the branched polymer structures and functional groups on the membrane's properties were investigated. The swelling ratios of all the membranes were kept below 15% at room temperature and had good dimensional stability at elevated temperatures. The branching degree has almost no effect on the dimensional change, but plays a great role in tuning the nanophase separation structure. The cyclic ammonium functionalized membrane showed a lower conductivity but a much better stability than imidazolium one. The BPEEK-3-Pip-53 membrane with the branching degree of 3% and piperidine functionalization degree of 53% showed the best performances. The ionic conductivity was 43 mS cm⁻¹ at 60 °C. The ionic conductivity in 1 M KOH at 60 °C after 336 h was 75% of its initial value (25% loss of conductivity), and the IEC was 83% of its initial value (17% loss of IEC), suggesting good alkaline stability. The peak energy density (60 °C) of the single H₂/O₂ fuel cell with BPEEK-3-Pip-53 membrane reached 133 mW cm⁻² at 260 mA cm⁻².     

Study on the partially cross-linked poly(styrene-b-(ethylene-co-butylene)-b-styrene) anion exchange membrane remotely (spaced hexyl) grafted double cation separated by different alkyl groups

In order to improve the alkali stability and OH⁻ conductivity of Poly (styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS)-based anion exchange membranes (AEMs), double cations with different alkyl intervals are remotely grafted onto the SEBS skeleton with hexyl as a linker through reactions such as acylation and ketone reduction. Then, SEBS-0.8Cn-0.2C6 cross-linked membranes were prepared to study the effect of the length of the alkyl chain between the dications on the ion transport and other properties. The OH⁻ conductivity of SEBS-0.8C4-0.2C6 cross-linked membrane can reach 85.27 mS cm⁻¹ at 80 °C, and the peak power density can reach 225 mW cm⁻² at a current density of 450 mA cm⁻². As the dicationic spacer alkyl chains became longer, the swelling rate and water uptake of the membranes increased, resulting in significant improvements in mechanical properties and chemical stability. After soaking in 2 M NaOH solution at 80 °C for 1200 h, the conductivity of SEBS-0.8C6-0.2C6 decreased by only 5.76%. Optimizing the side chain structure of SEBS skeleton can effectively improve the comprehensive performance of AEM.     

Highly durable and conductive poly(arylene piperidine) with a long heterocyclic ammonium side-chain for hydroxide exchange membranes

Recently, the preparation of hydroxide exchange membranes (HEMs) without ether bonds have attracted much attention because of their high chemical stability. Hence, ether-bond free, highly durable, and conductive poly(arylene piperidine)s (PAPips) tethered with heterocyclic ammonium via hexyl spacer chains were prepared successfully for HEMs via a facile synthetic procedure. The effect of the cationic groups (quaternary ammonium, piperidinium, and morpholinium) on the properties of the corresponding PAPip-based HEMs, including the morphology, hydroxide conductivity, and alkaline and chemical stability were systematically investigated. The as-designed PAPip-based membranes exhibited excellent overall performance. The membranes attached with piperidinium (IEC = 1.64 mmol g⁻¹) exhibited a hydroxide conductivity of 0.082 S cm⁻¹ at 80 °C and exhibited significant alkaline stability which maintained 80.1% of its conductivity after immersion in 1 M NaOH at 80 °C for 1500 h. The as-prepared membrane also presented a peak power density of 76 mW cm⁻² at 80 °C in a H₂/O₂ HEMFC. The resulting HEMs also showed excellent mechanical properties, thermal stability, and well-defined phase separation.     

Facile self-crosslinking to improve mechanical and durability of polynorbornene for alkaline anion exchange membranes

Crosslinking is a valid approach to enhance the mechanical and durability performance of anion exchange membranes (AEMs). Herein, a facile and effective self-crosslinking strategy, with no need for an additional crosslinker or a catalyzer, is proposed. A series of tunable self-crosslinking and ion conduction polynorbornene membranes are designed. The 5-norbornene-2-methylene glycidyl ether (NB-MGE) component which affords self-crosslinking enhances dimensional stability, while the flexible 5-norbornene-2-alkoxy-1-hexyl-3-methyl imidazolium chloride (NB-O-Im⁺Cl⁻) hydrophilic unit contributes high conductivity. The crosslinking significantly decreases the water uptake, and water swelling ratio provides excellent solvent-resistance and enhances the thermal and mechanical properties. Additionally, crosslinked rPNB-O-Im-x AEMs exhibit desirable alkaline stability. Impressively, the rPNB-O-Im-30 (IEC = 1.377) shows a moderate ion conductivity (61.8 m S cm⁻¹, 80 °C), with a suppressed water absorption and 88.17% initial OH⁻ conductivity is maintained after treated for 240 h with a 1.0 M NaOH solution at 60 °C. Suitably assessed of rPNB-O-Im-30 AEM reveals a 98.4 mW cm⁻² peak power density reached at a current density of about 208 mA cm⁻². The report offers a facile and effectual preparative technique for preparing dimensional and alkaline stable AEMs for fuel cells applications.     

Pendent piperidinium-functionalized blend anion exchange membrane for fuel cell application

Alkaline anion exchange membrane fuel cell has fast cathode reactions and thus allows the use of low cost electrocatalysts. However, its practical application is hindered by the low hydroxide ion conductivity and alkaline stability of AEM. In this study, pendent piperidinium functionalized polyetheretherketone is synthesized and blended with polybenzimidazole for fabrication of composite anion exchange membrane. The pendent piperidinium functionalized side chains can create well-connected ionic transporting channels and thus impart the blend membranes high hydroxide conductivity (61.5–72.8 mS cm⁻¹ at 80 °C) and good tensile strength (42.8–58.9 MPa). Due to the strong interactions between polybenzimidazole and piperidinium groups of the polymers as confirmed by Fourier transform infrared spectroscopy, the piperidinium functionalized blend anion exchange membrane can retain 95% of its original OH⁻ conductivity value when treated in 1 M KOH at 60 °C for 576 h. The single fuel cell assembled with the membrane can yield a peak power density of 87 mW cm⁻² at 80 °C. Our work provides a new and effective method to balance the hydroxide conductivity and alkaline stability of anion exchange membranes.     

Cross-linked anion exchange membranes with flexible,long-chain,bis-imidazolium cation cross-linker

Herein, poly (phenylene) oxide (PPO)-based cross-linked anion exchange membranes (AEMs) with flexible, long-chain, bis-imidazolium cation cross-linkers are designed and synthesized. Although the cross-linked membranes possess high ion exchange capacity (IEC) values of up to 3.51–3.94 meq g⁻¹, they have a low swelling degree and good mechanical strength because of their cross-linked structure. Though the membranes with the longest flexible bis-imidazolium cation cross-linker (BMImH-PPO) possess the lowest IEC among these PPO-based AEMs, they show the highest conductivity (24.10 mS cm⁻¹ at 20 °C) and highest power density (325.7 mW cm⁻² at 60 °C) because of the wide hydrophilic/hydrophobic microphase separation in the membranes that promote the construction of ion transport channels, as confirmed by atom force microscope (AFM) images and the small angle X-ray scattering (SAXS) analyses. Furthermore, the BMImH-PPO samples exhibit good chemical stability (10% and 6% decrease in IEC and conductivity, respectively, in 2 M KOH at 80 °C for 480 h, and a 22% decrease in weight in Fenton's reagent at 60 °C for 120 h), making such cross-linked AEMs potentially applicable in alkaline anion exchange membrane fuel cells.     

4-Aminopyridine grafted sulfonated poly(arylene ether ketone sulfone) proton exchange membrane with high relative selectivity for fuel cells

A series of sulfonated poly(arylene ether ketone sulfone)s polymer having a degree of sulfonation of 80% and a carboxyl group in the side chain (C-SPAEKS) were prepared by polycondensation. The 4-aminopyridine grafted sulfonated poly(arylene ether ketone sulfone)s polymer membranes (SPPs) were prepared by amidation reaction with the carboxyl group to immobilize 4-aminopyridine on the side chain. The ¹H NMR results and Fourier transform infrared of SPP membranes demonstrated the successful grafting of the 4-aminopyridine. Proton conductivity, water absorption, swelling ratio, and thermal stability of different proportions of SPP membranes were investigated under the different conditions. With the increase of pyridine grafting content, the methanol permeability coefficient of the membrane decreased significantly from 8.17 × 10⁻⁷ cm²s⁻¹ to 8.92 × 10⁻⁸ cm²s⁻¹ at 25 °C. And, the proton conductivity and relative selectivity of the membrane were positively correlated with the grafted pyridine content. Among them, the SPP-4 membrane exhibited the highest proton conductivity of 0.088 Scm⁻¹ at 100 °C. The relative selectivity increased from 4.73 × 10⁴ S scm⁻³ to 9.84 × 10⁴ S scm⁻³.     

Graphene inclusion effect on anion-exchange membranes properties for alkaline water electrolyzers

The main issues facing the development of Anion Exchange Membranes (AEM) are the low hydroxide ion (OH⁻) conductivity compared to protons (H⁺), and the thermal and chemical stability. Based on the its unique two-dimensional structure, graphene is estimated to be one of the best solutions for the hydrogen ions (H⁺ and OH⁻) selectivity and conductivity improvement. This work presents the graphene-composite membranes (AEMGrs) preparation and characterization in comparison with commercial FAA3-20® and FAA3-30® membranes from Fumatech. Various amounts of commercial graphene were incorporated into the Fumion® FAA-3 in NMP (10%), solutions which were then used to fabricate new AEMs by the Doctor-Blade (DB) method. Commercial and graphene-composite AEMs were studied by infrared spectroscopy with Fourier Transformation (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), water uptake (WU), ion exchange capacity (IEC), and in plane four-points electrochemical impedance spectroscopy (4p-EIS). The results indicated that the composite membranes containing 50 mg of graphene exhibited an improved IEC (3.16 mmol g⁻¹) and OH⁻ conductivity (113.27 mS cm⁻¹) at 80 °C measured in 0.01 M KOH (pH = 12).     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Macromolecule sulfonated Poly(ether ether ketone) crosslinked poly(4,4′-diphenylether-5,5′-bibenzimidazole) proton exchange membranes: Broaden the temperature application range and enhanced mechanical properties

Proton exchange membranes with a wide application temperature range were fabricated to start high-temperature fuel cells under room temperature. The volume swelling stability, oxidative stability as well as mechanical properties of crosslinked membranes have been improved for covalently crosslinking poly(4,4′-diphenylether-5,5′-bibenzimidazole) (OPBI) with fluorine-terminated sulfonated poly(ether ether ketone) (F-SPEEK) via N-substitution reactions. High proton conductivity was simultaneously realized at both high (80–160 °C) and low (40–80 °C) temperatures by crosslinking and jointly constructing hydrophilic-hydrophobic channels. The crosslinked membranes exhibited the highest proton conductivity of 191 mS cm⁻¹ at 80 °C under 98% relative humidity (RH) and 38 mS cm⁻¹ at 160 °C under anhydrous, respectively. Compared with OPBI membrane, the fuel cell performance of the crosslinked membranes showed higher peak power density at full temperature range (40–160 °C).     

Quaternary ammonium-functionalized hexyl bis(quaternary ammonium)-mediated partially crosslinked SEBSs as highly conductive and stable anion exchange membranes

We chemically modify a commercially available elastomeric triblock copolymer, poly(styrene-b-ethylene-co-butylene-b-styrene) SEBS, to produce quaternary ammonium-functionalized hexyl bis(quaternary ammonium)-mediated partially-crosslinked SEBSs with different grafting degree of the conducting head groups as highly conductive and stable anion exchange membranes (AEMs). In an attempt to achieve a high ion exchange capacity and hence conductivity of the corresponding membranes without causing ‘gelation’, which these types of SEBS polymers typically experience, we use a SEBS with a high content (57%) of styrene, and graft the quaternary ammonium (QA) as both a crosslinker and the conducting head group on the side chain of the SEBS. The partial crosslinking approach, in combination with introducing these QA-conducting head groups as the side chain of the SEBS, helps to form larger ion clusters, and also to form a nano-phase morphology with long-range connecting channels. This induced the highest ion conductivity, 174.8 mS cm⁻¹ at 80 °C, reported to date among these types of SEBS series. In addition, we obtain excellent cell performance with a current density of 450 mA cm⁻² at 0.6 V and a peak power density of 315 mW cm⁻² at 95% RH and 60 °C using the corresponding AEM.     

The effective methanol-blocking and proton conductivity membranes based on sulfonated poly (ether ether ketone ketone) and polyorganosilicon with functional groups

To solve the conflict between high proton conductivity and low methanol crossover of pristine sulfonated aromatic polymer membranes, the polyorganosilicon doped sulfonated poly (ether ether ketone ketone) (SPEEKK) composite membranes were prepared by introducing polyorganosilicon additive with various functional groups into SPEEKK in this study. Scanning electron microcopy (SEM) images showed the obtained membranes were compact. No apparent agglomerations, cracks and pinholes were observed in the SEM images of composite membranes. The good compatibility between polymer and additive led to the interconnection, thus producing new materials with great characteristics and enhanced performance. Besides, the dual crosslinked structure could be formed in composite membranes through the condensation of silanols and the strong interaction between matrix and additive. The formation of dual crosslinked structure optimized the water absorption, enhanced the hydrolytic stability and oxidative stability of membranes. Especially, the incorporation of additive improved the strength and flexibility of composite membranes at the same time, meaning that the life of the composite membranes might be extended during the fuel cell operation. Meanwhile, the proton conductivity improved with increasing additive content due to the loading of more available acidic groups. It is noteworthy that at 25% additive loading, the proton conductivity reached a maximum value of 5.4 × 10⁻² S cm⁻¹ at 25 °C, which exceeded the corresponding value of Nafion^@ 117 (5.0 × 10⁻² S cm⁻¹) under same experimental conditions. The composite membrane with 20 wt% additive was found to produce the highest selectivity (1.22 × 10⁵ S cm⁻³) with proton conductivity of 4.70 × 10⁻² S cm⁻¹ and methanol diffusion coefficient of 3.85 × 10⁻⁷ cm² s⁻¹, suggesting its best potential as proton exchange membrane for direct methanol fuel cell application. The main novelty of our work is providing a feasible and environment-friendly way to prepare the self-made polyorganosilicon with various functional groups and introducing it into SPEEKK to fabricate the dual crosslinked membranes. This design produces new materials with outstanding performance.     

Alkali-doped hyperbranched cross-linked polybenzimidazoles containing benzyltrimethyl ammoniums with improved ionic conductivity as alkaline direct methanol fuel cell membranes

Development of anion exchange membranes (AEMs) with good performance, such as high conductivity, good alkaline stability and mechanical strength, has been a hot topic for the fuel cell application. Here, a novel kind of hyperbranched cross-linker decorated with quaternary ammonium groups was introduced to polybenzimidazole (PBI) membranes and QOPBI-x membranes (where x is the weight ratio of the hyperbranched cross-linker). Compared with the linear OPBI membrane (0.091 S cm⁻¹), QOPBI-x membranes displayed an improved ionic conductivity (up to 0.122 S cm⁻¹) at 60°C after they were doped in 6 M KOH for 7 days. The KOH-doped QOPBI-x membranes also exhibited a high tensile strength (54.5-61.7 MPa) and superior alkaline stability. There is almost no decline in the ionic conductivity after being immersed in a 6 M KOH solution for 30 days. In addition, the alkaline direct methanol fuel cell (ADMFC) performance based on the KOH-doped OPBI and QOPBI-x membranes is described. The QOPBI-15 membrane displayed good performance (75.6 mW cm⁻²), which is 33.3% higher than the OPBI membrane (56.7 mW cm⁻²).     

Hydrogen production by electrochemical methanol reformation using alkaline anion exchange membrane based cell

Electrochemical methanol reformation (ECMR) is an alternative promising technology for producing hydrogen at low energy consumption compared to water electrolysis. In this process, solid polymer electrolyte Nafion® is widely employed, due to its superior proton conductivity. However, major limitations are the utilisation of expensive platinum based catalysts, high cost of the above membrane and the crossover of methanol through the polymer electrolyte membrane. In the present work, attempt has been to made to use low cost polymer electrolyte membrane and less noble electro catalyst. A series of Anion Exchange Membranes (AEM) are synthesized from Poly (2, 6-dimethyl-1, 4-phenylene oxide) (PPO) for its application in ECMR. PPO is successfully made into anion conducting by chloromethylation followed by quaternization. Two AEM's are synthesized by optimizing chloromethylation reaction time to 5 h and quaternization time to 5 and 8 h and are labelled as QPPO (C5, Q5) and QPPO (C5, Q8) respectively. Further, with the view to improve the anion conductivity further, composite AEMs are prepared by incorporating inorganic anion conducting quaternized graphene oxide particles in the matrix of PPO and QPPO (C5, Q8) polymers separately to obtain two polymers PPO/QGO and QPPO/QGO. The anionic conductivity of PPO/QGO and QPPO/QGO polymer is 1.2 × 10⁻⁴ and 1.5 × 10⁻⁴ S cm⁻¹ respectively. Both the membranes are subjected as electrolyte for ECMR application using membrane electrode assembly made by with in house synthesized nitrogen doped graphene supported Pd catalyst (Pd/NG) as anode catalyst and commercial Pt/C as cathode catalyst. The performance of composite membrane was compared with the commercial Fumasep® FAA anion exchange membrane. The polarization studies of ECMR cell with composite membrane shows comparable performance with that of commercial Fumasep® FAA-2 FAA membrane. The durability of the membrane(s) in the electrolysis environment was tested for about 20 h.     

Guanidinium cationic covalent organic nanosheets-based anion exchange composite membrane for fuel cells

Covalent organic frameworks (COFs) used for anion exchange membrane fuel cells (AEMFCs) are commonly endowed with ion conductivity by post-synthesis modification. However, this method usually results in uneven distribution of functional groups, low functionalization and severe ion capacity fade. Limited by hydrophobic skeleton and relatively large particle size of COFs, the COFs doping amount of the composite membrane is not high. Here we design and synthesize a series of guanidinium cationic covalent organic nanosheets-based anion exchange composite membranes. The positively charged guanidinium group as a building block can induce COF-DhaTG_Cl self-exfoliation into a few layered nanosheets through strong interlayer repulsion. Then, the nanosheets were introduced into quaternary ammonium-functionalized poly(2,6-dimethyl-1,4-phenyl ether) (QPPO). A series of COF-DhaTG_Cl/PPO composite AEMs was prepared with the highest doping amount of 30 wt% by casting method. The porous structure and repeat cationic guanidinium units on the skeleton will expose ion sites to the target ones, providing faster OH⁻ diffusion kinetics in one-dimensional channels. The OH⁻ conductivity of COF-DhaTG_Cl/PPO-20 composite membrane can reach 148.65 mS/cm at 80 °C. Meanwhile, the composite membrane also exhibits enhanced mechanical strength and alkaline stability with the maximum stress strength of 37.3 MPa and the residual conductivity of 96.29% after immersion in 2 M NaOH solution at 60 °C for two weeks.     

Improving the proton conductivity of sulfonated poly (ether ether ketone) membranes by incorporating a crystalline nanoassembly of trimesic acid and melamine

A novel proton exchange membrane was synthesized by embedding a crystalline which was nano-assembled through trimesic acid and melamine (TMA·M) into the matrix of the sulfonated poly (ether ether ketone) (SPEEK) to enhance the proton conductivity of the SPEEK membrane. Fourier transform infrared indicated that hydrogen bonds existed between SPEEK and TMA·M. XRD and SEM indicated that TMA·M was uniformly distributed within the matrix of SPEEK, and no phase separation occurred. Thermogravimetric analysis showed that this membrane could be applied as high temperature proton exchange membrane until 250 °C. The dimensional stability and mechanical properties of the composite membranes showed that the performance of the composite membranes is superior to that of the pristine SPEEK. Since TMA·M had a highly ordered nanostructure, and contained lots of hydrogen bonds and water molecules, the proton conductivity of the SPEEK/TMA·M-20% reached 0.00513 S cm⁻¹ at 25 °C and relative humidity 100%, which was 3 times more than the pristine SPEEK membrane, and achieved 0.00994 S cm⁻¹ at 120 °C.     

Poly(isatin-piperidinium-terphenyl) anion exchange membranes with improved performance for direct borohydride fuel cells

In this work, an effective design strategy for anion exchange membranes (AEMs) incorporating ether-bond free and piperidinium cationic groups promote chemical stability. A series of poly (isatin-piperidium-terphenyl) based AEMs were synthesized by superacid catalyzed polymerization reaction, followed by quaternization. The effect of functionalization on the performance of poly (isatin-N-dimethyl piperidinium triphenyl) (PIDPT-x) AEMs was investigated. Highly reactive N-propargylisatin was introduced into the backbone to achieve high molecular weight polymers (η_a = 2.06–3.02 dL g⁻¹) leading to robust mechanical properties, as well as modulating 1.78–2.00 mmol g⁻¹ of the ion exchange capacity (IEC) of the AEMs by feeding. Apart from that, the rigid non-ionized isatin-terphenyl segment provides AEMs improved dimensional stability with a swelling ratio of less than 12% at 80 °C. Among them, PIDPT-90 exhibited a higher OH⁻ conductivity of 105.6 mS cm⁻¹ at 80 °C. The alkali-stabilized PIDPT-85 AEM was presented, in which OH⁻ conductivity retention maintained 85.6% in a 2 M NaOH at 80 °C after 1632 h. Afterward, the direct borohydride fuel cells (DBFC) with PIDPT-90 membrane as a separator showed an open-circuit voltage of 1.63 V and a peak power density of 75.5 mWcm⁻² at 20 °C. This work demonstrates the potential of poly (isatin- N-dimethyl piperidinium triphenyl) as AEM for fuel cells.     

Flexibly crosslinked and post-morpholinium-functionalized poly(2,6-dimethyl-1,4-phenylene oxide) anion exchange membranes

Morpholinium-functionalized cross-linked poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) anion exchange membranes were prepared using a crosslinking/post-functionalization method. 4,4'-(oxybis(ethane-2,1-diyl)) dimorpholine (OEDM) having a flexible long chain and hydrophilic ether bond was for the first time used as the crosslinker. The brominated PPO reacted with OEDM, forming a crosslinked structure and accomplishing partial functionalization. Further functionalization was carried out by immersion in N-methylmorpholine aqueous solution. The degree of crosslinking was controlled by varying the proportion of brominated PPO to OEDM because excessive bromomethyl groups ensured the occurrence of crosslinking reaction. The cross-linked structure promoted the formation of micro-phase separation and effectively limited swelling. The crosslinked membrane shows much higher conductivity and lower swelling ratio compared to non-crosslinked one at similar IEC. The highest hydroxide conductivity that the crosslinked membrane achieves is 35 mS cm⁻¹ at 20 °C. The power density for the H₂/O₂ single cell assembled with this membrane is up to 193 mW cm⁻². In addition, the crosslinked PPO-MmOH-Cr membrane exhibits good alkaline stability with conductivity loss of less than 15% after soaking in 1 M KOH for 96 h.     

Novel quaternized carbon dots modified polysulfone-based anion exchange membranes with improved performance

At present, low conductivity and poor chemical stability are still the biggest challenges in the research on anion exchange membranes (AEMs). Herein, novel nanocomposite AEMs were first constructed by introducing quaternized carbon dots (QCDs) into the imidized polysulfone matrix (Im-PSU). QCDs were synthesized by quaternization of CDs derived from citric acid and ethylenediamine. The physicochemical properties and electrochemical properties of the nanocomposite AEMs were significantly improved due to the introduction of QCDs. It was found that the QCDs can improve the ion transport channel of the nanocomposite AEMs. Compared with pure Im-PSU AEM, the OH⁻ conductivity and physicochemical properties of the nanocomposite membranes were enhanced, and the OH⁻ conductivity of ImPSU-1.0%-QCDs composite membrane can reach 109.3 mS cm⁻¹ at 80 °C, and 61.2% initial OH⁻ conductivity was maintained in 1.0 M NaOH solution for 500 h at 60 °C. Our research proves that the nanofiller with a small size can better improve the performance of composite AEMs, and provide an efficient strategy for future research work in the design and preparation of AEMs.     

Synthesis of (Si-PWA)-PVA/PTFE high-temperature proton-conducting composite membrane for DMFC

The inorganic silica immobilized PWA based (Si-PWA)-PVA/PTFE composite membrane was developed by an amalgamation of pore filling and layer by layer (LBL) casting. The composition of the top layer was optimized to be 0.3 M PWA: 0.2 M TEOS: 0.15PVA concerning to proton-conductivity and methanol permeability of the membrane. Surface morphological studies and elemental analysis were carried out by using SEM-EDX. The FT-IR and XRD analysis had confirmed the intercalation of sol with PTFE. Thermal deformation of the membrane was studied by TGA and it is stable up to 180 °C. Ion exchange capacity and water uptake were determined to be 2.38 meq per gram and 21.7%. The membrane has exhibited maximum proton conductivity of 41.2 mS cm⁻¹ at 100 °C. The membrane has significantly lower methanol permeability of 3.2 × 10⁻⁷ cm² S⁻¹ compared to that of Nafion117 (7.9 × 10⁻⁷ cm² S⁻¹) at 28 °C and the same trend was observed at 40, 60, and 80 °C. The (Si-PWA)-PVA/PTFE composite membrane is showed enhanced proton conductivity and lower methanol permeability at elevated temperatures.