共查询到18条相似文献,搜索用时 93 毫秒
1.
高分子减水增强剂用于陶瓷墙地砖的研究 总被引:5,自引:0,他引:5
研究了高分子水增强剂对陶瓷墙地砖的作用,高分子减水增强剂用于陶瓷墙地砖泥浆时,适当分子量的高分子在粘土颗粒的外表层形成适当的高分子的位阻效应;就此,克服了粘土颗粒间的静电引力,产生有效的减水效果,当高分子减水剂与无机物减水剂混合使用时,既利用了无机物减水剂双电层的因素,又利用了高分子减水剂位阻的因素,减水效果更好;该高分子化合物在干燥后的粘接性,对陶瓷墙地砖的干坯强度起到了增进作用;这种复合效果可 相似文献
2.
3.
石膏减水剂作用机理研究 总被引:18,自引:0,他引:18
系统研究了萘系FDN(β-naphthalene sulfonie acid type),多羧酸系HC(polycarboxylate type),两种不同类型减水剂在石膏表面的吸附特性、界面结构、分散作用及其稳定性,以及减水剂对石膏水化进程、硬化体微结构的影响。根据性能测试结果,探讨了石膏减水剂作用机理。结果表明,减水剂吸附改变了石膏颗粒界面结构与电化学性质,通过静电斥力和空间位阻发挥分散作用。直链型FDN为平躺吸附,其分散作用主要为依赖于ξ电位的静电斥力,ξ电位则决定于石膏表面首层吸附量;接枝共聚型多羧酸减水剂为梳状吸附,其分散作用为空间位阻与静电斥力协同作用;由于新生水化产物对静电斥力的屏蔽作用,静电斥力引起的分散作用的稳定性较差,流动度经时损失大;空间位阻效应受水化影响较小,其分散作用的稳定性较好,流动度经时损失较小;减水剂对石膏水化进程、水化产物形貌影响甚微,但可明显改善硬化体孔结构,使孔隙率降低,孔径细化。 相似文献
4.
5.
聚羧酸高效减水剂的作用机理为静电斥力和空间位阻效应,其中以空间位阻效应为主.根据高聚物在固/液界面吸附行为,探讨以吸附层厚度和吸附构象作为主要参数来表征和研究聚羧酸减水剂吸附在水泥颗粒表面引起的空间位阻效应;讨论了X射线光电子能谱(XPS)、俄歇电子能谱(AES)、原子力显微镜(AFM)、光子相关光谱(PCS)、单分子力谱(SMFS)、流体力学、椭圆偏振、Monte Carlo模拟等方法在表征减水剂空间位阻的可行性、相关研究成果及其局限性,展望了聚羧酸减水剂空间位阻效应的研究前景. 相似文献
6.
XPS测定减水剂吸附层厚度 总被引:10,自引:5,他引:5
通过XPS谱图和XPS信息深度的计算方法测定了减水剂在胶凝颗粒表面的吸附层厚度。结果显示,木质素磺酸盐减水剂(LS)、改性木质素磺酸盐减水剂(GCL1-T)、萘系减水剂(FDN)和氨基磺酸盐减水剂(ASP)在水泥颗粒表面的吸附层厚度分别为8.70、10.87、1.50、7.26 nm;GCL1-T和FDN在粉煤灰表面的吸附层厚度分别为6.76 nm和0.95 nm。此方法可较准确描述减水剂在胶凝颗粒表面吸附层厚度的相对大小。由测定结果可进一步推断,FDN的分散机理以静电斥力效应为主;而空间位阻效应在LS、GCL1-T和ASP的分散机理中不可忽略。 相似文献
7.
8.
9.
本文介绍了陶瓷用墨水(简称陶瓷墨水)的制备现状,通过分析双电层效应、空间位阻效应、静电位阻效应等稳定机制,提出可通过降低色料颗粒的Stocks沉降速率、选择合适的色料、对色料颗粒进行表面改性、选择合适的分散剂、对色料颗粒进行聚合物微胶囊包裹等途径提高陶瓷墨水的稳定性。 相似文献
10.
11.
12.
采用微波法合成了腐殖酸钠-丙烯酰胺-丙烯酸钠共聚物减水剂,研究了减水剂单体配比、pH值以及加入量对陶瓷减水效果的影响,并对其机理进行了探讨. 相似文献
13.
14.
15.
16.
《Ceramics International》2021,47(18):25169-25176
In this paper, porous ceramics with high porosity and low bulk density were prepared by using steel slag and kaolin as main raw materials and polyurethane sponge as template. The effects of steel slag particle size, zirconia addition, the solid content of the slurry, and the addition of polycarboxylic acid water-reducing agent on the properties of ceramics were studied. In addition, by adding a surfactant (Sodium dodecyl sulfate) to form fine pores on the original framework of the three-dimensional network porous ceramic, the shortcomings of the single as well as the uncontrollable density and porosity of the porous ceramic, which are produced by the template method, are improved. When the grinding time of steel slag is 90 min, the content of zirconia is 3% wt, the solid content of ceramic slurry is 64% wt, and 0.6% wt polycarboxylic acid water-reducing agent and 0.4% of surfactant are added, the prepared porous ceramic skeleton is clear and good. The porous ceramic has a low bulk density (as low as 157.869 kg/m3), high porosity (about 94.05%) and high compressive strength (0.2 MPa). The crystalline phase of it is mainly composed of anorthite, gehlenite, forsterite and quartz. The addition of zirconia, water-reducing agent and surfactant only changes the macrostructure of porous ceramics, and does not change its crystal phase composition. The preparation of porous ceramics from steel slag not only solves the recycling problem of steel slag, but also provides a good substitute for main raw materials of porous ceramics. 相似文献
17.
18.
对添加三种有机高分子减水剂和两种聚磷酸盐碱水剂的Al2O3-Cr2O3-ZrO2质浇注料桨体与泥料流变参数进行对比。研究表明,在加有Al2O3、CrO3超细粉,以纯铝酸钙水泥为结合剂的浇注料中,有机减水剂的作用效果更为显著。对减水剂的作用机理和作用规律以及ξ电位,流变参数和流动值的关系作了探讨。 相似文献