Synergistic Ionic Liquid in Hole Transport Layers for Highly Stable and Efficient Perovskite Solar Cells

Perovskite solar cells (PSCs) with n-i-p structures often utilize an organic 2,2′,7,7′-tetrakis (N, N-di-p-methoxyphenyl-amine) 9,9′-spirobifluorene (spiro-OMeTAD) along with additives of lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI) and tert-butylpyridine as the hole transporting layer (HTL). However, the HTL lacks stability in ambient air, and numerous defects are often present on the perovskite surface, which is not conducive to a stable and efficient PSC. Therefore, constructive strategies that simultaneously stabilize spiro-OMeTAD and passivate the perovskite surface are required. In this work, it is demonstrated that a novel ionic liquid of dimethylammonium bis(trifluoromethanesulfonyl)imide (DMATFSI) could act as a bifunctional HTL modulator in n-i-p PSCs. The addition of DMATFSI into spiro-OMeTAD can effectively stabilize the oxidized spiro-OMeTAD⁺ cation radicals through the formation of spiro-OMeTAD⁺TFSI⁻ because of the excellent charge delocalization of the conjugated CF₃SO₂⁻ moiety within TFSI⁻. In addition, DMA⁺ cations could move toward the perovskite from the HTL, resulting in the passivation of defects at the perovskite surface. Accordingly, a power conversion efficiency of 23.22% is achieved for PSCs with DMATFSI and LiTFSI co-doped spiro-OMeTAD. Moreover, benefiting from the improved ion migration barrier and hydrophobicity of the HTL, still retained nearly 80% of their initial power conversion efficiency after 36 days of exposure to ambient air.     

Molecular Synergistic Passivation for Efficient Perovskite Solar Cells and Self-Powered Photodetectors

The interface between the perovskite and electron-transporting material is often treated for defect passivation to improve the photovoltaic performance of devices. A facile 4-Acetamidobenzoic acid (containing an acetamido, a carboxyl, and a benzene ring)-based molecular synergistic passivation (MSP) strategy is developed here to engineer the SnO_x/perovskite interface, in which dense SnO_x are prepared using an E-beam evaporation technology while the perovskite is deposited with vacuum flash evaporation deposition method. MSP engineering can synergistically passivate defects at the SnO_x/perovskite interface by coordinating with Sn⁴⁺ and Pb²⁺ with functional group  CO in the acetamido and carboxyl. The optimized solar cell devices can achieve the highest efficiency of 22.51% based on E-Beam deposited SnO_x and 23.29% based on solution-processed SnO₂, respectively, accompanied by excellent stability exceeding 3000 h. Further, the self-powered photodetectors exhibit a remarkably low dark current of 5.22 × 10⁻⁹ A cm⁻², a response of 0.53 A W⁻¹ at zero bias, a detection limit of 1.3 × 10¹³ Jones, and a linear dynamic range up to 80.4 dB. This work proposes a molecular synergistic passivation strategy to enhance the efficiency and responsivity of solar cells and self-powered photodetectors.     

Goethite Quantum Dots as Multifunctional Additives for Highly Efficient and Stable Perovskite Solar Cells

Minimization of defects and ion migration in organic–inorganic lead halide perovskite films is desirable for obtaining photovoltaic devices with high power conversion efficiency (PCE) and long‐term stability. However, achieving this target is still a challenge due to the lack of efficient multifunctional passivators. Herein, to address this issue, n‐type goethite (FeOOH) quantum dots (QDs) are introduced into the perovskite light‐absorption layer for achieving efficient and stable perovskite solar cells (PSCs). It is found that the iron, oxygen, and hydroxyl of FeOOH QDs can interact with iodine, lead, and methylamine, respectively. As a result, the crystallization kinetics process can be retarded, thereby resulting in high quality perovskite films with large grain size. Meanwhile, the trap states of perovskite can be effectively passivated via interaction with the under‐coordinated metal (Pb) cations, halide (I) anions on the perovskite crystal surface. Consequently, the PSCs with FeOOH QDs achieve a high efficiency close to 20% with negligible hysteresis. Most strikingly, the long‐term stability of PSCs is significantly enhanced. Furthermore, compared with the CH₃NH₃PbI₃‐based device, a higher PCE of 21.0% is achieved for the device assembled with a Cs_0.05FA_0.81MA_0.14PbBr_0.45I_2.55 perovskite layer.     

Ligand-Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells

Excess lead iodide (PbI₂), as a defect passivation material in perovskite films, contributes to the longer carrier lifetime and reduced halide vacancies for high-efficiency perovskite solar cells. However, the random distribution of excess PbI₂ also leads to accelerated degradation of the perovskite layer. Inspired by nanocrystal synthesis, here, a universal ligand-modulation technology is developed to modulate the shape and distribution of excess PbI₂ in perovskite films. By adding certain ligands, perovskite films with vertically distributed PbI₂ nanosheets between the grain boundaries are successfully achieved, which reduces the nonradiative recombination and trap density of the perovskite layer. Thus, the power conversion efficiency of the modulated device increases from 20% to 22% compared to the control device. In addition, benefiting from the vertical distribution of excess PbI₂ and the hydrophobic nature of the surface ligands, the modulated devices exhibit much longer stability, retaining 72% of their initial efficiency after 360 h constant illumination under maximum power point tracking measurement.     

Efficient and Stable Inverted Perovskite Solar Cells Incorporating Secondary Amines

Large‐bandgap perovskites offer a route to improve the efficiency of energy capture in photovoltaics when employed in the front cell of perovskite–silicon tandems. Implementing perovskites as the front cell requires an inverted (p–i–n) architecture; this architecture is particularly effective at harnessing high‐energy photons and is compatible with ionic‐dopant‐free transport layers. Here, a power conversion efficiency of 21.6% is reported, the highest among inverted perovskite solar cells (PSCs). Only by introducing a secondary amine into the perovskite structure to form MA_1?xDMA_xPbI₃ (MA is methylamine and DMA is dimethylamine) are defect density and carrier recombination suppressed to enable record performance. It is also found that the controlled inclusion of DMA increases the hydrophobicity and stability of films in ambient operating conditions: encapsulated devices maintain over 80% of their efficiency following 800 h of operation at the maximum power point, 30 times longer than reported in the best prior inverted PSCs. The unencapsulated devices show record operational stability in ambient air among PSCs.     

Highly Stable and Efficient FASnI3‐Based Perovskite Solar Cells by Introducing Hydrogen Bonding

Tin‐based perovskites with narrow bandgaps and high charge‐carrier mobilities are promising candidates for the preparation of efficient lead‐free perovskite solar cells (PSCs). However, the crystalline rate of tin‐based perovskites is much faster, leading to abundant trap states and much lower open‐circuit voltage (V_oc). Here, hydrogen bonding is introduced to retard the crystalline rate of the FASnI₃ perovskite. By adding poly(vinyl alcohol) (PVA), the O? H…I^? hydrogen bonding interactions between PVA and FASnI₃ have the effects of introducing nucleation sites, slowing down the crystal growth, directing the crystal orientation, reducing the trap states, and suppressing the migration of the iodide ions. In the presence of the PVA additive, the FASnI₃–PVA PSCs attain higher power conversion efficiency of 8.9% under a reverse scan with significantly improved V_oc from 0.55 to 0.63 V, which is one of the highest V_oc values for FASnI₃‐based PSCs. More importantly, the FASnI₃–PVA PSCs exhibit striking long‐term stability, with no decay in efficiency after 400 h of operation at the maximum power point. This approach, which makes use of the O? H…I^? hydrogen bonding interactions between PVA and FASnI₃, is generally applicable for improving the efficiency and stability of the FASnI₃‐based PSCs.     

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Perovskite solar cells (PSCs) have attracted great attention in the past few years due to their rapid increase in efficiency and low‐cost fabrication. However, instability against thermal stress and humidity is a big issue hindering their commercialization and practical applications. Here, by combining thermally stable formamidinium–cesium‐based perovskite and a moisture‐resistant carbon electrode, successful fabrication of stable PSCs is reported, which maintain on average 77% of the initial value after being aged for 192 h under conditions of 85 °C and 85% relative humidity (the “double 85” aging condition) without encapsulation. However, the mismatch of energy levels at the interface between the perovskite and the carbon electrode limits charge collection and leads to poor device performance. To address this issue, a thin‐layer of poly(ethylene oxide) (PEO) is introduced to achieve improved interfacial energy level alignment, which is verified by ultraviolet photoemission spectroscopy measurements. Indeed as a result, power conversion efficiency increases from 12.2% to 14.9% after suitable energy level modification by intentionally introducing a thin layer of PEO at the perovskite/carbon interface.     

A Polymerization-Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Intrinsically, detrimental defects accumulating at the surface and grain boundaries limit both the performance and stability of perovskite solar cells. Small molecules and bulkier polymers with functional groups are utilized to passivate these ionic defects but usually suffer from volatility and precipitation issues, respectively. Here, starting from the addition of small monomers in the PbI₂ precursor, a polymerization-assisted grain growth strategy is introduced in the sequential deposition method. With a polymerization process triggered during the PbI₂ film annealing, the bulkier polymers formed will be adhered to the grain boundaries, retaining the previously established interactions with PbI₂. After perovskite formation, the polymers anchored on the boundaries can effectively passivate undercoordinated lead ions and reduce the defect density. As a result, a champion power conversion efficiency (PCE) of 23.0% is obtained, together with a prolonged lifetime where 85.7% and 91.8% of the initial PCE remain after 504 h continuous illumination and 2208 h shelf storage, respectively.     

Multifunctional Polymer-Regulated SnO2 Nanocrystals Enhance Interface Contact for Efficient and Stable Planar Perovskite Solar Cells

Perovskite solar cells (PSCs) have rapidly developed and achieved power conversion efficiencies of over 20% with diverse technical routes. Particularly, planar-structured PSCs can be fabricated with low-temperature (≤150 °C) solution-based processes, which is energy efficient and compatible with flexible substrates. Here, the efficiency and stability of planar PSCs are enhanced by improving the interface contact between the SnO₂ electron-transport layer (ETL) and the perovskite layer. A biological polymer (heparin potassium, HP) is introduced to regulate the arrangement of SnO₂ nanocrystals, and induce vertically aligned crystal growth of perovskites on top. Correspondingly, SnO₂–HP-based devices can demonstrate an average efficiency of 23.03% on rigid substrates with enhanced open-circuit voltage (V_OC) of 1.162 V and high reproducibility. Attributed to the strengthened interface binding, the devices obtain high operational stability, retaining 97% of their initial performance (power conversion efficiency, PCE > 22%) after 1000 h operation at their maximum power point under 1 sun illumination. Besides, the HP-modified SnO₂ ETL exhibits promising potential for application in flexible and large-area devices.     

Stable and High-Efficiency Methylammonium-Free Perovskite Solar Cells

Organic–inorganic metal halide perovskite solar cells (PSCs) have achieved certified power conversion efficiency (PCE) of 25.2% with complex compositional and bandgap engineering. However, the thermal instability of methylammonium (MA) cation can cause the degradation of the perovskite film, remaining a risk for the long-term stability of the devices. Herein, a unique method is demonstrated to fabricate highly phase-stable perovskite film without MA by introducing cesium chloride (CsCl) in the double cation (Cs, formamidinium) perovskite precursor. Moreover, due to the suboptimal bandgap of bromide (Br⁻), the amount of Br⁻ is regulated, leading to high power conversion efficiency. As a result, MA-free perovskite solar cells achieve remarkable long-term stability and a PCE of 20.50%, which is one of the best results for MA-free PSCs. Moreover, the unencapsulated device retains about 80% of the original efficiencies after a 1000 h aging study. These results provide a feasible approach to enhance solar cell stability and performance simultaneously, paving the way for commercializing PSCs.     

Modifying PTAA/Perovskite Interface via 4-Butanediol Ammonium Bromide for Efficient and Stable Inverted Perovskite Solar Cells

Inverted perovskite solar cells (IPSCs) have witnessed an impressive development in recent years. However, their efficiency is still significantly behind theoretical limits, and device instabilities hinder their commercialization. Two main obstacles to further enhancing their performance via one-step deposition are: 1) the unsatisfactory film quality of perovskite and 2) the poor surface contact. To address the above issues, 4-butanediol ammonium Bromide (BD) is utilized to passivate Pb²⁺ defects by forming Pb N bonds and fill vacancies of formamidinium ions at the buried surface of perovskite. The wettability of poly [bis (4-phenyl) (2,4,6-triMethylphenyl) amine] films is also improved due to the formation of hydrogen bonds between PTAA and BD molecules, resulting in better surface contacts and enhanced perovskite crystallinity. As a result, BD-modified perovskite thin films show a significant increase in the mean grain size, as well as a dramatic enhancement in the PL decay lifetime. The BD-treated device exhibits an efficiency of up to 21.26%, considerably higher than the control device. Moreover, the modified devices show dramatically enhanced thermal and ambient stability compared to the control ones. This methodology paves the way to obtain high-quality perovskite films for fabricating high-performance IPSCs.     

Methylammonium Chloride as a Double-Edged Sword for Efficient and Stable Perovskite Solar Cells

The additive engineering strategy promotes the efficiency of solution-processed perovskite solar cells (PSCs) over 25%. However, compositional heterogeneity and structural disorders occur in perovskite films with the addition of specific additives, making it imperative to understand the detrimental impact of additives on film quality and device performance. In this work, the double-edged sword effects of the methylammonium chloride (MACl) additive on the properties of methylammonium lead mixed-halide perovskite (MAPbI_3-xCl_x ) films and PSCs are demonstrated. MAPbI_3-xCl_x films suffer from undesirable morphology transition during annealing, and its impacts on the film quality including morphology, optical properties, structure, and defect evolution are systematically investigated, as well as the power conversion efficiency (PCE) evolution for related PSCs. The FAX (FA = formamidinium, X = I, Br, and Ac) post-treatment strategy is developed to inhibit the morphology transition and suppress defects by compensating for the loss of the organic components, a champion PCE of 21.49% with an impressive open-circuit voltage of 1.17 V is obtained, and remains over 95% of the initial efficiency after storing over 1200 hours. This study elucidates that understanding the additive-induced detrimental effects in halide perovskites is critical to achieve the efficient and stable PSCs.     

Dopant-Free Polymer Hole Transport Materials for Highly Stable and Efficient CsPbI3 Perovskite Solar Cells

All-inorganic perovskite CsPbI₃ contains no volatile organic components and is a thermally stable photoactive material for wide-bandgap perovskite solar cells (PSCs); however, CsPbI₃ readily undergoes undesirable phase transitions due to the hygroscopic nature of the ionic dopants used in commonly used hole transport materials. In the current study, the popular donor material PM6 in organic solar cells is used as a hole transport layer (HTL). The benzodithiophene-based backbone-conjugated polymer requires no dopant and leads to a higher power conversion efficiency (PCE) than 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-OMeTAD). Moreover, PM6 also shows priorities in hole mobility, hydrophobicity, cascade energy level alignment, and even defect passivation of perovskite films. With PM6 as the dopant-free HTL, the PSCs achieve a champion PCE of 18.27% with a competitive fill factor of 82.8%. Notably, the present PCE is based on the dopant-free HTL in CsPbI₃ PSCs reported thus far. The PSCs with PM6 as the HTL retain over 90% of the initial PCE stored in a glovebox filled with N₂ for 3000 h. In contrast, the PSCs with Spiro-OMeTAD as the HTL maintain ≈80% of the initial PCE under the same conditions.     

Targeted Therapy for Interfacial Engineering Toward Stable and Efficient Perovskite Solar Cells

The poor long‐term stability of organic–inorganic hybrid halide perovskite solar cells (pero‐SCs) remains a big challenge for their commercialization. Although strategies such as encapsulation, doping, and passivation have been reported, there remains a lack of understanding of the water resistance and thermal stability of pero‐SCs. A fullerene derivative, [6,6]‐phenyl‐C₆₁‐butyric acid‐N,N‐dimethyl‐3‐(2‐thienyl)propanam ester (PCBB‐S‐N) containing a functional sulfur atom and C_60, is synthesized and employed as electron transporting layer (ETL)/intermediary layer to targetedly heal the multitype defects in pero‐SCs or assist the growth of ETL, such as [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), in planar p‐i‐n pero‐SCs. The repaired pero‐SCs can not only dramatically improve their power conversion efficiencies, but also address stability issues under moisture and high temperature. The corresponding mechanism of PCBB‐S‐N with targeted therapy effect in a device is systematically investigated by both experiments and theoretical calculation. This work demonstrates that the proposed fullerene derivative with finely tuned chemical structure can be a promising ETL candidate or intermediary to approach stable and efficient planar p‐i‐n pero‐SCs.     

A Two‐Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films toward Highly Reproducible Perovskite Solar Cells

The solvent‐engineering method is widely used to fabricate top‐performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two‐stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI₃ films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and UV–vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI₃ crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low‐temperature annealing stage.     

Perovskite Grains Embraced in a Soft Fullerene Network Make Highly Efficient Flexible Solar Cells with Superior Mechanical Stability

Halide perovskite films processed from solution at low‐temperature offer promising opportunities to make flexible solar cells. However, the brittleness of perovskite films is an issue for mechanical stability in flexible devices. Herein, photo‐crosslinked [6,6]‐phenylC₆₁‐butyric oxetane dendron ester (C‐PCBOD) is used to improve the mechanical stability of methylammonium lead iodide (MAPbI₃) perovskite films. Also, it is demonstrated that C‐PCBOD passivates the grain boundaries, which reduces the formation of trap states and enhances the environmental stability of MAPbI₃. Thus, MAPbI₃ perovskite solar cells are prepared on solid and flexible substrates with record efficiencies of 20.4% and 18.1%, respectively, which are among the highest ever reported for MAPbI₃ on both flexible and solid substrates. The result of this work provides a step improvement toward stable and efficient flexible perovskite solar cells.