Crystallographic studies on the site selectivity of Ca<Superscript>2+</Superscript>, K<Superscript>+</Superscript>, and Rb<Superscript>+</Superscript> ions within zeolite Y (Si/Al = 1.56)

The single-crystals of Ca²⁺, K⁺-exchanged zeolite Y, and Ca²⁺, Rb⁺-exchanged zeolite Y were prepared by using flow method with mixed ion-exchange solution, whose Ca(NO₃)₂:KNO₃ mole ratios were 1:1 (crystal 1) and 1:100 (crystal 2), and Ca(NO₃)₂:RbNO₃ mole ratios were 1:1 (crystal 3) and 1:100 (crystal 4), respectively, with a total concentration of 0.05 M. They were fully dehydrated by vacuum dehydration at 723 K and 1 × 10^?6 Torr for 2 days. Their crystals were determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group \(Fd \overline{3}\) m, respectively, and were refined to the final error indices R ₁/wR ₂ = 0.057/0.196, 0.073/0.223, 0.055/0.188, and 0.049/0.175 for crystals 1, 2, 3, and 4, respectively. In the structure of crystal 1 (|Ca₂₃K₂₉|[Si₁₁₇Al₇₅O₃₈₄]-FAU), 23 Ca²⁺ ions per unit cell occupy sites I, II′, and II; 29 K⁺ ions per unit cell are at sites II′, II, and III′. In the structure of crystal 2 (|Ca_18.5K₃₈|[Si₁₁₇Al₇₅O₃₈₄]-FAU), 18.5 Ca²⁺ ions per unit cell occupy sites I, I′, and II; 38 K⁺ ions are at sites I′, II, and III′. In the structure of crystal 3 (|Ca₂₇Rb₂₁|[Si₁₁₇Al₇₅O₃₈₄]-FAU), 27 Ca²⁺ ions per unit cell occupy sites I, II′, and II; 21 Rb⁺ ions per unit cell are at sites II′, II, and III. In the structure of crystal 4 (|Ca₁₈Rb₃₉|[Si₁₁₇Al₇₅O₃₈₄]-FAU), 18 Ca²⁺ ions per unit cell occupy sites I and II; 39 Rb⁺ ions per unit cell are at sites I′, II′, II, III, and III′. In the four crystals, the Ca²⁺ ion which has much smaller size and higher charge than other cations such as K⁺ and Rb⁺ energetically preferred at site I and so the first to be filled on it. Unlike Ca²⁺ ion, no K⁺ and Rb⁺ ions are found at site I, which are clearly less favorable for K⁺ and Rb⁺ ions.     

Preparation and structural study of fully dehydrated,highly Mg2+-exchanged zeolite Y (FAU,Si/Al = 1.56) from undried methanol solution

Single-crystal of fully dehydrated, Mg²⁺-exchanged zeolite Y, |Mg_34.5Na₆|[Si₁₁₇Al₇₅O₃₈₄]-FAU (Si/Al = 1.56), was successfully prepared from undried methanol solution (water concentration 0.02 M). A crystal of Na-Y was treated with 0.05 M MgCl₂ ·6H₂O in the solvent at 333 K, followed by vacuum dehydration at 723 K and 1 × 10^?6 Torr for 2 days. Its structure was determined by single-crystal synchrotron X-ray diffraction techniques, in the cubic space group \(Fd\overline{3} m\) at 100 K. It was refined to the final error indices R ₁/wR ₂ = 0.0587/0.2210 with 1,294 reflections for which F _o > 4σ(F _o). In the structure of |Mg_34.5Na₆|[Si₁₁₇Al₇₅O₃₈₄]-FAU, 34.5 Mg²⁺ ions per unit cell are found at four different crystallographic sites: 15 per unit cell are located at site I at the center of the hexagonal prism [Mg–O = 2.216(2) Å], two are at site I’ in the sodalite cavity near the hexagonal prism [Mg–O = 2.20(3) Å], only one is located at site II’ in the sodalite cavity [Mg–O = 2.197(23) Å], and the remaining 16.5 are at site II near single 6-oxygen rings in the supercage [Mg–O = 2.103(3) Å]. The residual 6 Na⁺ ions per unit cell are found at site II [Na–O = 2.218(7) Å]. No water molecules are found in this structure.     

Hydrothermal Synthesis of Mn–Fe Nano Oxides and Their Composite for Removal of Zn<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Co<Superscript>2+</Superscript> from Simulated Radioactive Waste

A study on the sorption of Zn²⁺, Ni²⁺ and Co²⁺ onto mixed oxide of Mn and Fe obtained at different hydrothermal conditions and its organic hybrid film modified with polyacrylamide (Mn–Fe oxide/PAM) has been examined. The characterization of inorganic oxides and its composite samples were performed using XRD, SEM, FTIR, XRF and DTA-TGA techniques. The percent sorption of Zn²⁺, Ni²⁺ and Co²⁺ on Mn–Fe oxide at pH 4.5 was 97, 11.85 and 10 % respectively with selectivity order Zn²⁺ ? Ni²⁺ > Co²⁺. The sorption value of Zn²⁺ at pH 4.5 onto Fe–Mn oxide reached nearly the same value of Zn²⁺ onto its composite. So, the new compound of Fe–Mn oxide has promising uses for separation of zinc ions while its composite can be used for removal all of these cations.     

Studies of Bone-Bonding Ability and Antibacterial Properties of Ag<Superscript>+</Superscript>, Cu<Superscript>2+</Superscript> or Zn<Superscript>2+</Superscript> ions Doping within Hench’s Bioglass and Glass-Ceramic Derivatives

Derived Hench’s bioglasses with specific ionic dopants Ag⁺, Cu²⁺, or Zn²⁺ have been prepared. The bone-boding ability or bioactivity behavior for the prepared glasses and their glass-ceramic derivatives has been investigated after immersion in phosphate solution for two weeks. Collective Fourier transform infrared absorption spectra (FTIR) and scanning electron microscopic (SEM) studies were conducted in order to study the in-vitro bioactivity behavior. X-ray diffraction (XRD) analysis was carried out to identify the crystallized phases upon thermal heat treatment through a two-step regime. The glasses and their glass-ceramic derivatives were tested to study their antibacterial or antifungal efficiency responding to the doped metal ions. FTIR spectra revealed the generation of two split peaks at about 560 and 605 cm^?1, after immersion in (0.2 M) sodium phosphate solution (Na₃PO₄), signifying the formation of a crystalline calcium phosphate phase, leading to hydroxyapatite formation. SEM examinations show characteristic rounded or nodular microcrystals for hydroxyapatite which support the FTIR data. X-ray diffraction analysis indicated crystallization of the main soda-lime silicate phase (1Na₂O.2CaO.3SiO₂) besides a secondary silicon phosphate phase (SiO₂.P₂O₅) in the studied glass ceramics. The route of crystallization is discussed on the basis of the presence of 6% P₂O_5; which facilitates the formation of phase separation and voluminous bulk crystallization of the main soda-lime silicate phase. The introduction of dopants is identified to cause no changes in the precipitated phases, with only minor changes in the percent of the crystalline phases. Experimental data indicate that the glass-ceramic samples are effective in bioactivity and antimicrobial efficiency.     

Zn<Superscript>2+</Superscript>-exchange kinetics and antimicrobial properties of synthetic zirconium umbite (K<Subscript>2</Subscript>ZrSi<Subscript>3</Subscript>O<Subscript>9</Subscript>·H<Subscript>2</Subscript>O)

Zirconium umbite, K₂ZrSi₃O₉·H₂O, is a microporous framework ion exchanger whose potential as a carrier for Zn²⁺ ions in antimicrobial formulations has not yet been investigated. Accordingly, batch Zn²⁺-exchange kinetics of synthetic zirconium umbite (K-UM) and the subsequent antimicrobial action of the zinc-bearing phase (Zn-UM) against Staphylococcus aureus and Escherichia coli are reported. Nonstoicheiometric over-exchange of Zn²⁺ for K⁺ was observed and attributed to hydrolysis and complexation reactions of Zn²⁺ within the umbite framework. The exchange process, which was described by a simple pseudo-first-order model (k ₁ = 2.69 × 10⁻⁴ min⁻¹, R ² = 0.992), did not achieve equilibrium within 120 h at 25 °C, by which time the uptake of zinc was found to be 1.04 mmol g⁻¹. The minimal bactericidal concentrations of Zn-UM for E. coli and S. aureus were found to be >10 g cm³ and <1.0 g cm³, respectively.     

Preparation of excessively Ni2+-exchanged zeolite Y (FAU,Si/Al = 1.70) and its single-crystal structure

A single crystal of excessively Ni²⁺-exchanged zeolite Y (FAU, Si/Al = 1.70) was prepared by exchange of |Na₇₁|[Si₁₂₁Al₇₁O₃₈₄]-FAU with an aqueous stream 0.05 M Ni(NO₃)₂ at 293 K and pH 4.9, followed by vacuum evacuation at room temperature and 1.3 × 10^?4 Pa. Its crystal structure was determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group Fd \(\overline{ 3}\) m and was refined to the final error indices R ₁/wR ₂ = 0.0554/0.1557 for |Ni_24.7(NiOH)_12.1(Ni₂O(OH)₂)_4.8(Ni₄AlO₄)_1.7Na_17.0(H₃O)_6.9|[Si₁₁₇Al₇₅O₃₈₄]-FAU. Crystal has about 53 Ni²⁺ ions per unit cell, indicating the uptake of excess Ni(OH)₂, perhaps as NiOH⁺ ions. Some dealumination of the framework occurred during Ni²⁺ exchange. In this structure, Ni²⁺ ions occupy sites I, I′, II′, II, and III′. The residual Na⁺ ions are found at sites II′ and II. Due to the low pH of the Ni²⁺ exchange solution, some H₃O⁺ ions are observed. Nonframework oxygen atoms as oxide and hydroxide ions and orthoaluminate coordinate to some of Ni²⁺ ions to give NiOH⁺, Ni₂O(OH)₂, and Ni₄AlO₄ ³⁺ groups.     

Crystallization and Luminescence Properties of Sm<Superscript>3+</Superscript>-Doped SrO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> Glass-Ceramics

Sm³⁺-doped SrO–Al₂O₃–SiO₂ glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-ceramics were investigated. The results indicate that the crystal phase in this system is monocelsian (SrAl₂Si₂O₈). Under the excitation with blue light (475 nm) the Sm³⁺-doped SrO–Al₂O₃–SiO₂ glass-ceramics emit green, orange and red lights centered at 565, 605, 650 and 715 nm, which can be assigned to the ⁴G_5/2 → ⁶H_J/2 (J = 5, 7, 9, 11) electron transitions in Sm³⁺ ions, respectively. With the increase of nucleation/crystallization temperature, the crystallite part rises from 66 to 79%. Besides, by increasing crystallization temperature or concentration of Sm³⁺, the samples emission located at 565, 605 and 650 nm is intensified significantly. We envision that, by fine controlling and combining of these three (green, orange and red) lights in an appropriate proportion, the Sm³⁺-doped glass-ceramics are promising luminescence materials for white light-emitting diodes devices.     

Preparation and Luminescent Properties of Tb<Superscript>3+</Superscript>-doped SrO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> Glass–Ceramics for white Light-Emitting Diode

Tb³⁺-doped SrO–Al₂O₃–SiO₂ glass-ceramics are prepared by melting under ambient atmosphere and followed by two-step heat treatment approach. Extensive differential thermal analysis, X-ray diffraction and scanning electron microscope characterizations are applied to investigate thermal properties, crystal structure, and morphology of these glass-ceramics. The results indicate that the optimal ratio of two nucleation agents (TiO₂ and ZrO₂) is 3:1 (molar fraction) in glass-ceramics. In addition, several heat treatment schedules are developed to study the influence of treatment temperature on luminescence properties of Tb³⁺- doped glass-ceramics. The results demonstrate that there are four emission bands located at 489, 547, 588 and 623 nm under 376 nm ultraviolet excitation, corresponding to ⁵D₄ → ⁷F_j (j = 6, 5, 4, 3) transitions of Tb³⁺, respectively. At last, the corresponding chromaticity coordinates are calculated and constructed, which indicates that the Tb³⁺ glass-ceramic can emit approximate white light under 376 nm ultraviolet excitation when they nucleated at 950°C and crystallized at 1050°C. The white immersion approached standard illuminant C as the crystallization temperature increased.     

Behavior of cesium cation in zeolite Y (FAU,Si/Al = 1.56) and their single-crystal structures, |Cs<Subscript>75−x</Subscript>Na<Subscript>x</Subscript>|[Si<Subscript>117</Subscript>Al<Subscript>75</Subscript>O<Subscript>384</Subscript>]-FAU (x = 35 and 54)

To study the tendency of Cs⁺ exchange into zeolite Y (Si/Al = 1.56) dependence on Cs⁺ and Na⁺ concentration of aqueous solution during exchange, two single-crystals of fully dehydrated, Cs⁺-and Na⁺-exchanged zeolites Y were prepared by the flow method using a mixed ion-exchange solution whose CsNO₃:NaNO₃ mol ratios were 1:1 (crystal 1) and 1:100 (crystal 2), respectively, with a total concentration of 0.1 M, followed by vacuum dehydration at 723 K. Their crystals were determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group Fd \(\overline{ 3}\) m, respectively, and were refined to the final error indices R ₁/wR ₂ = 0.084/0.248 and 0.088/0.274 for crystals 1 and 2, respectively. In the structure of |Cs₄₀Na₃₅|[Si₁₁₇Al₇₅O₃₈₄]-FAU (crystal 1), 40 Cs⁺ ions per unit cell occupy five different equipoints; 3, 3, 14, 9, and 11 are at sites I, II′, II, IIIa and IIIb, respectively, whereas, the remaining 35 Na⁺ ions occupy three different sites: 9, 11, and 15 are at sites I, I′, and II, respectively. In the structure of |Cs₂₁Na₅₄|[Si₁₁₇Al₇₅O₃₈₄]-FAU (crystal 2), 21 Cs ⁺ ions per unit cell occupy three equipoints; 4, 6, and 11 are at sites II, IIIa, and IIIb, respectively. The residual 54 Na⁺ ions per unit cell are found at three different sites; 6, 20 and 28 are at sites I, I′, and II, respectively. The degrees of ion exchange are 53 and 28 % for crystals 1and 2, respectively. This result shows that the degree of Cs⁺ exchange decreased sharply by decreasing the initial Cs⁺ concentration and increasing the initial Na⁺ concentration in given ion-exchange solution.     

Structural and Magnetic Properties of Cu<Superscript>2+</Superscript> Substituted Co–Zn Ferrite Nanoparticles,Synthesized by Sol–Gel Combustion Method

In this work, the effect of Cu content on structural and magnetic properties of Cobalt–Zinc Ferrite nanoparticles synthesized by sol–gel combustion method have been investigated. All the samples exhibit cubic spinel structure and the lattice constant decreases linearly with increasing Cu-content. Average crystallite sizes calculated from Debye–Scherrer formula are in the range of 51–100 nm. The broadening of X-ray diffraction peaks decrease with increasing Cu content ‘x’ suggest that crystallite size increases with increasing ‘x’. Cation distribution estimated form X-ray line intensity calculations show that Cu ions simultaneously occupy tetrahedral (A) and octahedral (B) sites with different ratio and Zn and Co ions occupies A and B sites respectively. With increasing Cu content a fraction of Co ions migrate to A site when x?>0.2. Grain sizes estimated from SEM are found to be increase with increasing Cu content. Particle size calculated using TEM for the undoped Co–Zn ferrites is about 55 nm. Saturation magnetization (Ms), Coercivity (Hc) and remanent magnetization (Mr) that varies significantly with Cu-Content. Saturation magnetization decreases from 90.7 emu/g (x?=?0.0) to 51 emu/g (x?=?0.4). The proposed cation distribution supports the variation in saturation magnetization and Coercivity with increasing Cu content.     

Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lysine) as a polychelatogen to remove toxic metals using ultrafiltration and bactericide properties of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lysine)–Cu<Superscript>2+</Superscript> complexes

Poly(l-lysine) is a water-soluble, synthetic polypeptide containing functional amine groups that help remove di- and trivalent metal ions from aqueous solutions. This polymer’s removal properties were studied under different experimental conditions: (1) competitive and non-competitive conditions; (2) different pHs; and (3) filtration factors. Under the conditions of the Liquid-Phase Polymer-Based Retention (LPR) technique, the cooper (II) ion interaction was found to be selective and efficient when compared to other divalent metal ions studied. However, interestingly, this selectivity disappeared when trivalent metal ions were present. The polymer–metal ion interactions are based on the amino groups of the side-chains as well as the polypeptide backbone chain. The removal of metal ions was strongly dependent on the pH. By structural characterization with FT-IR and EPR spectroscopy, participation of the amide and mainly amine groups was found to take place for the coordination. For the Cu²⁺, coordination through four amine nitrogen donor atoms in the primary coordination sphere was detected. Antibacterial activity tests were conducted with the poly(l-lysine)–Cu²⁺ complex and showed a higher activity in comparison with the precursors Cu²⁺ and poly(l-lysine) at the same concentrations for E. coli (6538P), a Gram-negative bacterium, and S. aureus (ATCC), a Gram-positive bacterium.     

Synthesis,Characterization and Ion Exchange Behavior of Polyaniline Stannic Silicomolybdate,an Organic–Inorganic Composite Material: Quantitative Separation of Pb<Superscript>2+</Superscript> Ions from Industrial Effluents

Polyaniline stannic silicomolybdate, an organic–inorganic composite material was synthesized by mixing polyaniline, an electrically conducting organic polymer into the matrices of inorganic precipitate of stannic silicomolybdate. The experimental parameters such as mixing volume ratio and pH were established for the synthesis of the material. The material was found granular, thus suitable for column operations. Polyaniline stannic silicomolybdate shows better ion exchange capacity and thermal stability. The exchanger was characterized on the basis of instrumental techniques such as FTIR, TGA, DTA XRD and SEM. The X-ray diffraction study showed semi-crystalline nature. The elution behavior of the material was also examined. The SEM micrographs show the difference in surface morphology of inorganic component and the composite material. Distribution coefficient studies were performed for different metal ions in varied solvent systems such as Triton X-100, trichloroacetic acid and acetic acid. The effect of temperature on the distribution coefficient was also studied. It was found that 40 °C appeared to be the most suitable temperature. The material was found to be selective for Pb²⁺ ion. On the basis of distribution coefficient values, some analytically important binary separations of metal ions viz. Mg²⁺–Pb²⁺, Zn²⁺–Pb²⁺, Cd²⁺–Pb²⁺ and Mg²⁺–Cu²⁺ were achieved on polyaniline stannic silicomolybdate columns. The practical utility of polyaniline stannic silicomolybdate was explored by achieving quantitative separation of Pb²⁺ in industrial waste effluents from battery manufacturing units.