有机化坡缕石黏土-膨胀型阻燃聚丙烯复合材料的制备及性能

制备了优异阻燃性能(LOI36%)兼具良好力学性能的膨胀型阻燃聚丙烯复合材料OPGS/PA-APP/PP。将有机化坡缕石黏土引入到哌嗪-多聚磷酸铵(PA-APP)膨胀型阻燃(IFR)聚丙烯(PP)复合材料中,通过极限氧指数(LOI)、垂直燃烧(UL-94)、热重分析法(TGA)、扫描电子显微镜(SEM)、通用电子万能试验机研究了有机化坡缕石黏土添加量对PA-APP阻燃聚丙烯复合材料阻燃性能和力学性能的影响。结果表明,添加质量分数为2%的有机化坡缕石黏土提高了该复合材料的阻燃性能和力学性能。此外,所制备样品经垂直燃烧测试可达到阻燃V-0级别。实验证明,有机化坡缕石黏土在膨胀型阻燃聚丙烯复合材料中具有明显的协效阻燃作用。     

Synergistic effect of mesoporous silica SBA‐15 on intumescent flame‐retardant polypropylene

Mesoporous silica SBA‐15 synthesized from Pluronic P123 and tetraethoxysilane was used as a synergistic agent on the flame retardancy of polypropylene (PP)/intumescent flame‐retardant (IFR) system. Limiting oxygen index (LOI), UL‐94 rating and thermogravimetric analysis were used to evaluate the synergistic effect of SBA‐15 on PP/IFR system. It showed that PP/IFR system could reach V‐0 with loading of SBA‐15 ranging from 0.5 to 3 wt%, while without SBA‐15 it had no rating at UL‐94 test. The LOI value increased from 25.5 to 32.2 when the loading of SBA‐15 was 1 wt%. The thermal stability of PP/IFR was improved in the presence of SBA‐15 and the amount of the char residue at 600° C was increased from 8.96 to 16.42 wt% when loading of SBA‐15 varied from 0.5 to 5 wt%. Laser Raman spectroscopy (LRS) and scanning electron microscopy were employed to study the morphology of the char residue of PP/IFR system with and without SBA‐15. Copyright © 2010 John Wiley & Sons, Ltd.     

Flame Retardancy and Thermal Performance of Polypropylene Treated With the Intumescent Flame Retardant,Piperazine Spirocyclic Phosphoramidate

Piperazine spirocyclic phosphoramidate (PSP), a novel halogen‐free intumescent flame retardant, was synthesized and used to improve the flame retardancy and dripping resistance of polypropylene (PP) combined with ammonium polyphosphate (APP) and a triazine polymer charring‐foaming agent (CFA). The optimum flame‐retardant formulation was PSP:APP:CFA = 3:6:2 (weight ratio). The flammability and thermal behavior of the (intumescent flame‐retardant)‐PP (IFR‐PP) were investigated via limiting oxygen index (LOI), vertical burning tests (UL‐94), thermogravimetric analysis, and cone calorimetry (CONE). The results indicated that the IFR‐PP had both excellent flame retardancy and anti‐dripping ability. The optimum flame‐retardant formulation gave an LOI value of 39.8 and a UL‐94 V‐0 rating to PP. Moreover, both the heat release rate and the total heat release of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analyses. The residues of IFR‐PP obtained after CONE tests were observed by scanning electron microscopy, and it was found that the char yield was directly related to the flame retardancy and anti‐dripping behavior of the treated PP. J. VINYL ADDIT. TECHNOL., 20:10–15, 2014. © 2014 Society of Plastics Engineers     

Fabrication of Fly Ash‐Based Mesoporous Aluminosilicate Oxides Loaded with Zinc and its Synergistic Fire Resistancy in Polypropylene

A kind of mesoporous aluminosilicate oxides (MAOs) were fabricated from industrial waste, coal fly ash. After loaded with zinc on MAO, the product MAO‐Zn was characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, and scanning electron microscopy (SEM). MAO‐Zn was incorporated with intumescent flame retardant (IFR) together and used in polypropylene (PP). Basic characterization including limiting oxygen index (LOI), vertical burning test (UL‐94), and cone calorimeter test (CCT) were finished. The result showed the LOI value of PP was only 17.7 and cannot pass UL‐94 grade; however, 25 wt% IFR in PP help the composite obtained LOI value of 27.6 and passed UL‐94V‐1 grade. Surprisingly, with only 2 wt% MAO‐Zn substitution of IFR, the LOI of PP/IFR composite sharply went up to 37.2 and passed V‐0 grade. CCT results documented that heat, smoke, and fatal gas release were obviously suppressed by IFR/MAO‐Zn combination. By SEM observation and quantitative analysis of TGA results, the contribution of MAO‐Zn was summarized as adsorption of heat/smoke and promotion on charring. It was worth mentioning that the low dose of MAO‐Zn (≤ 3 wt%) did not bring further deterioration on mechanical properties. J. VINYL ADDIT. TECHNOL., 26:135–143, 2020. © 2019 Society of Plastics Engineers     

Synergistic flame‐retardant effect of halloysite nanotubes on intumescent flame retardant in LDPE

Synergistic flame‐retardant effect of halloysite nanotubes (HNTs) on an intumescent flame retardant (IFR) in low‐density polyethylene (LDPE) was investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), cone calorimeter (CC) test, and scanning electronic microscopy (SEM). The results of LOI and UL‐94 tests indicated that the addition of HNTs could dramatically increase the LOI value of LDPE/IFR in the case that the mass ratio of HNTs to IFR was 2/28 at 30 wt % of total flame retardant. Moreover, in this case the prepared samples could pass the V‐0 rating in UL‐94 tests. CC tests results showed that, for LDPE/IFR, both the heat release rate and the total heat release significantly decreased because of the incorporation of 2 wt % of HNTs. SEM observations directly approved that HNTs could promote the formation of more continuous and compact intumescent char layer in LDPE/IFR. TGA results demonstrated that the residue of LDPE/IFR containing 2 wt % of HNTs was obviously more than that of LDPE/IFR at the same total flame retardant of 30 wt % at 700°C under an air atmosphere, and its maximum decomposing rate was also lower than that of LDPE/IFR, suggesting that HNTs facilitated the charring of LDPE/IFR and its thermal stability at high temperature in this case. Both TGA and SEM results interpreted the mechanism on the synergistic effect of HNTs on IFR in LDPE, which is that the migration of HNTs to the surface during the combustion process led to the formation of a more compact barrier, resulting in the promotion of flame retardancy of LDPE/IFR. In addition, the mechanical properties of LDPE/IFR/HNTs systems were studied, the results showed that the addition of 0.5–2 wt % of HNTs could increase the tensile strength and the elongation at break of LDPE/IFR simultaneously. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40065.     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Flame retardation and thermal degradation of intumescent flame‐retarded polypropylene composites containing spirophosphoryldicyandiamide and ammonium polyphosphate

A novel halogen‐free intumescent flame retardant, spirophosphoryldicyandiamide (SPDC), was synthesized and combined with ammonium polyphosphate (APP) to produce a compound intumescent flame retardant (IFR). This material was used in polypropylene (PP) to obtain IFR‐PP systems whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) test, UL‐94, thermogravimetric analysis, and cone calorimetry. In addition, the mechanical properties of the systems were investigated. The results indicated that the compound intumescent flame retardant showed both excellent flame retardancy and antidripping ability for PP when the two main components of the IFR coexisted in appropriate proportions. The optimum flame retardant formulation was SPDC:APP = 3:1, which gave an LOI value of 38.5 and a UL‐94 V‐0 rating. Moreover, the heat release rate, production of CO, smoke production rate, and mass loss rate of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analysis. The char residues from the cone calorimetry experiments were observed by scanning electron microscopy, which showed that a homogeneous and compact intumescent char layer was formed. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Effect of charring agent THEIC on flame retardant properties of polypropylene

Tris(2‐hydroxyethyl) isocyanurate (THEIC) was used as charring agent and combined with ammonium polyphosphate (APP) to form an intumescent flame retardant (IFR) for polypropylene (PP). The flame retardancy and combustion performance of PP/IFR composite was tested by limiting oxygen index (LOI), UL‐94 vertical burning test and cone calorimeter. The results showed that PP/IFR composite had highest LOI of 34.8 and obtained V‐0 rating when 30 wt % IFR was loaded and mass ratio APP/THEIC was 2 : 1. The peak heat release (PHRR) and total heat release (THR) values of PP composite containing FRs were remarkably reduced compared with that of pure PP. However, water resistant test demonstrated the PP/IFR composite had poor flame retardant durability, both the LOI value and UL‐94 V‐rating decreased when PP/IFR composite was soaked in water at 70°C after 36 h. The degradation process and the char morphology of IFR and PP/IFR composite were investigated by TGA and SEM images. The possible reaction path between APP and THEIC in the swollen process was proposed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41214.     

Synthesis of amino trimethylene phosphonic acid melamine salt and its application in flame‐retarded polypropylene

Amino trimethylene phosphonic acid melamine salt (MATMP) was synthesized and used as acid source and blowing agent in intumescent flame‐retarded polypropylene (PP); its compositions were characterized by Fourier transform infrared spectroscopy and X‐ray powder diffraction. An intumescent flame retardant (IFR) system composed of MATMP, pentaerythritol (PER), and PP was tested by limiting oxygen index (LOI), UL‐94, cone calorimeter tests, and thermogravimetric analysis and compared with an ammonium polyphosphate (APP)/PER system. The results showed that MATMP had better water resistance than APP, the LOI value of PP/MATMP/PER composite can reach 30.3%, and a UL‐94 V‐0 rating can be reached at 25 wt % IFR loading. The amount of residual char of IFR MATMP/PER was 20.3 and 9.5 wt % at 400 and 600 °C, respectively. A thermooxidative degradation route and a possible flame‐retardant mechanism of IFR were proposed according to the analysis of evolved gases and residual chars. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46274.     

Performance of an intumescent-flame-retardant master batch synthesized by twin-screw reactive extrusion: effect of the polypropylene carrier resin

A novel way of preparing an intumescent flame retardant (IFR) and its master batch by the reactive extrusion of melamine phosphate and pentaerythritol, together with a polypropylene (PP) carrier, in a twin-screw extruder has been established. The effect of the PP carrier resin on the flame retardancy and water resistance of the intumescent-flame-retarding PP materials was investigated by using the limited oxygen index (LOI), UL94 test, elemental analysis (EA), thermogravimetric analysis (TGA) and water solubility testing, respectively. In addition, the mechanism of the carrier effect was analysed by melt flow index (MFI), scanning electron microscopy (SEM), and TGA. The experimental results show that with increasing content of carrier resin (PP) in the IFR master batch from 0 to 15 wt%, the flame retardancy LOI of the PP/IFR (25 wt% loading) blend increased from 29.5 to 32, and the UL94 level at 1.6 mm thickness was improved from failure to a V-0 rating. In addition, the water resistance of a flame-retarded composite at 25 wt% IFR loading was greatly improved, i.e. after treatment with hot water at 70 °C for 168 h, the reducing rate of element N in the IFR/PP blend decreased from 18.3% with 5 wt% carrier resin to 12.9% with 15 wt% carrier resin, and the LOI reduction rate decreased from 15.3% without any carrier resin to 10.9% with 15 wt% carrier resin, while the flame-retarded PP with an IFR master batch containing 10–15 wt% carrier resin maintained its UL94 V-0 rating at 3.2 mm thickness. The improvement in flame retardancy was attributed to the improved flame-retardant (FR) dispersion due to the carrier resin, while the improved water resistance was explained by the lowered water solubility of the IFR, the improved FR dispersion and the improved compatibility of the FR with the matrix resin due to the carrier resin. Reactive extrusion is a novel way to obtain pelletissed IFRs without powder pollution and their corresponding flame-retarding materials with a number of desired properties. Copyright © 2004 Society of Chemical Industry     

Enhancement of wollastonite on flame retardancy and mechanical properties of PP/IFR composite

Wollastonite, a natural calcium metasilicate possessing acicular crystal habit structure, was used together with intumescent flame retardant (IFR) to flame retard polypropylene (PP). The synergistic effects between wollastonite and IFR were investigated using limiting oxygen index (LOI) test, cone calorimeter test, thermogravimetric analysis, scanning electron microscope‐energy dispersive spectrometer (SEM‐EDS), etc. The results revealed that wollastonite could effectively improve mechanical properties and flame retardancy of the PP/IFR composite. When 2.0 wt% wollastonite substituted for the same amount of IFR in the composite, the impact strength was enhanced from 4.6 kJ/m² to 6.8 kJ/m², which was increased by 47.1%. Meanwhile, the LOI was increased from 33.0% to 35.5%, a UL‐94V‐0 rating was achieved and the peak heat release rate decreased substantially from 314.4 kW/m² to 262.8 kW/m². Furthermore, the SEM‐EDS results provided positive evidence that the quality of char layer of the PP/IFR/wollastonite was superior to that of the PP/IFR composite due to synergism between wollastonite and IFR. POLYM. COMPOS., 35:158–166, 2014. © 2013 Society of Plastics Engineers     

Synergistic effects of fumed silica on intumescent flame‐retardant polypropylene

The synergistic effects of fumed silica on the thermal and flame‐retardant properties of intumescent flame retardant (IFR) polypropylene based on the NP phosphorus‐nitrogen compound have been studied by Fourier transfer infrared (FTIR) spectroscopy, cone calorimeter test (CCT), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and UL‐94 tests. The LOI and UL‐94 data show that when ≤1 wt % fumed silica substituted for the IFR additive NP can increase 2 to 4% LOI values of the PP blends and keep the V‐0 rating. The data obtained from the CCT tests indicate the heat release rates (HRR) reduce by about 23% for the PP/NP sample with 0.5 wt % fumed silica, whereas the mass loss rates (MLR) and total heat release (THR) values are much lower than those of the PP/NP samples without fume silica. The TGA data demonstrate that a suitable amount of fumed silica can increase the thermal stability and charred residue of the PP/IFR/SiO₂ blends after 500°C. The morphological structures of charred residues observed by SEM give positive evidence that a suitable amount of fumed silica can promote the formation of compact intumescent charred layers and prevent the charred layers from cracking, which effectively protects the underlying polymer from burning. The dynamic FTIR spectra reveal that the synergistic flame‐retardant mechanism of a suitable amount of fumed silica with IFR additive is due to its physical process in the condensed phases. However, a high loading of fumed silica restricts the formation of charred layers with P? O? P and P? O? C complexes formed from burning of polymer materials and destroys the swelling behavior of intumescent charred layers, which deteriorates the flame retardant and thermal properties of the PP/IFR blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

含磷钛酸酯偶联剂改性膨胀型阻燃剂及其阻燃聚丙烯的研究

采用含磷钛酸酯偶联(剂PTCA)对由三聚氰胺焦磷酸(盐MPP)和季戊四(醇PER)复配组成的膨胀型阻燃(剂IFR)进行表面改性,并用其制备阻燃聚丙烯(PP)。研究了PTCA用量对PP/IFR共混物力学性能和阻燃性能的影响,并通过热重分析和扫描电镜对共混物进行了表征。结果表明:PTCA有效改善了IFR与PP基体的相容性,提高了PP/IFR共混物的力学性能及阻燃性能。当PTCA用量为1.0%时,共混物的拉伸强度和缺口冲击强度为27.3 MPa和3.2 kJ/m2,分别比未改性的PP/IFR提高了18.7%和6.7%;LOI从未改性PP/IFR的28.5%提高到31.5%,且通过UL94 V-0级;此外,共混物的热稳定性也明显提高,700℃时的残炭率由未改性PP/IFR的8.2%提高到12.1%。     

Synergistic effect of kaolinite/halloysite on the flammability and thermostability of polypropylene

Kaolinite (Kaol) and halloysite nanotubes (HNT) are both aluminosilicate clays with similar chemical formulation and different microshapes. In this article, nanotubular HNT and nanoplate Kaol together were introduced into polypropylene (PP) containing intumescent flame retardant (IFR). The flammability of the PP composites was characterized by limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimeter tests (CCT). The results showed that for the composite with 75 wt % PP and 25 wt % IFR, its LOI was 31.0% and it obtained a UL‐94 grade of V‐2. For the composite of 75 wt % PP, 23.5 wt % IFR, and 1.5 wt % (Kaol/HNT = 9/1), its LOI increased to 36.9 and it obtained a UL‐94 grade of V‐0; at the same time, its peak heat release rate value in CCT decreased by 82.2% compared to neat PP. The thermostability analysis indicated that the mixture of Kaol/HNT could improve the thermostability and final char yield. The char residues were comprehensively analyzed by scanning electron microscopy and Fourier transform infrared spectroscopy. The results illustrated that the Kaol/HNT combination was beneficial to forming a crosslinked network and promoting formation of a compact char with higher strength. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46507.     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synergist flame retarding effect of ultrafine zinc borate on LDPE/IFR system

The flame retardancy of low‐density polyethylene (LDPE) treated with complex flame retardant composed of ultrafine zinc borate (UZB) and intumescent flame retardant (IFR) have been investigated by limited oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA), cone calorimeter test, scanning electron micrograph (SEM), energy‐dispersive spectrometer (EDS), and X‐ray diffraction (XRD). The results of LOI and UL‐94 test indicate the desired flame retardancy of LDPE is obtained when the mass ratio of UZB to IFR is 4.2 : 25.8 and the complex flame retardant mass content is 30% (based on LDPE). The results of cone calorimeter show that heat release rate (HRR) peak, total heat release (THR), and mass loss of LDPE/IFR/UZB decrease substantially when compared with those of LDPE/IFR. TGA results show that the residue of LDPE/IFR/UZB increases obviously than that of LDPE/IFR when the temperature is above 600°C. SEM indicates the quality of char forming of LDPE/IFR/UZB is superior to that of LDPE/IFR. The results of EDS and XRD indicate that boron orthophosphate (BPO₄) and zinc‐contained compounds are formed in the residual char and these substances may play an important role in stabilizing the intumescent char structure and decrease the degradation speed substantially when subjected to high temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3667–3674, 2007     

层状阻燃结构对PBT/IFR复合材料性能的影响

通过熔融共混和模压成型技术制备了聚对苯二甲酸丁二酯(PBT)/膨胀型阻燃剂(IFR)共混和层状复合材料,其中层状复合材料为3层阻燃结构,内层为非阻燃层(纯PBT),内层外面两层为阻燃层(PBT/IFR)。通过UL94垂直燃烧、极限氧指数(LOI)以及拉伸和冲击性能测试对比分析了两种复合材料的阻燃性能和力学性能。结果表明,与PBT/IFR共混复合材料相比,PBT/IFR层状复合材料的阻燃性能提高幅度更大,虽然低IFR含量下其力学性能低于共混复合材料,但随着IFR含量增加,力学性能下降幅度更小。当层状复合材料中的阻燃层/非阻燃层/阻燃层的厚度比为1.5 mm/1 mm/1.5 mm,即IFR质量分数为22.5%时,其拉伸强度、断裂伸长率和冲击强度与相同IFR用量下的共混复合材料相当,而阻燃性能与IFR质量分数为30%的共混复合材料相当,其UL 94阻燃等级达到V–0级,LOI提高到24.4%。这表明,采用层状阻燃可控受限结构,可在较低的IFR用量下更好地提高PBT/IFR复合材料的阻燃性能,同时减缓了力学性能下降的幅度。     

膨胀型阻燃剂/二乙基次磷酸铝阻燃改性不饱和树脂基复合材料

采用密胺包覆聚磷酸铵（APP）、季戊四醇（PER）和三聚氰胺（MEL）作为膨胀型阻燃剂（IFR）对不饱和树脂（UP）进行改性,研究了APP、PER和MEL不同复配比例及用量对不饱和树脂基复合材料阻燃性能和力学性能的影响。基于IFR最佳用量,以二乙基次磷酸铝（ADP）为协效剂,研究了ADP用量对IFR/UP阻燃复合材料阻燃性能、力学性能及热稳定性的影响。结果表明,当APP∶PER∶MEL复配比例为4∶1∶1,IFR添加量为15 %（质量分数,下同）时,复合材料综合性能最佳,其极限氧指数为27.4 %,UL 94垂直燃烧达到V?1等级,弯曲强度和冲击韧性分别为100.3 MPa和6.3 kJ/m²;ADP的引入能够进一步提高IFR/UP复合材料阻燃性能,且随着ADP质量分数的增加而增强;当ADP质量分数为2 %时,IFR?ADP/UP复合材料极限氧指数为28.5 %并达到V?0阻燃等级,弯曲强度和冲击韧性分别为110 MPa和7.8 kJ/m²,与IFR/UP复合材料相比,分别提高了9.7 %和23.8 %;ADP能够促进IFR/UP复合材料表面成炭,缓解基体的热降解。     

超支化三嗪成炭剂阻燃聚丙烯

将自制的超支化三嗪成炭剂（CFA）与聚磷酸铵（APP）以1∶1的比例复配成膨胀型阻燃剂（IFR）,用于聚丙烯（PP）的阻燃。采用冲击实验、拉伸实验、极限氧指数仪、垂直燃烧（UL 94）和扫描电子显微镜 (SEM)等方法表征了PP阻燃复合材料的力学性能、阻燃性能,分析了断面形貌。结果表明,添加阻燃剂后,冲击强度呈先增加后降低的趋势,拉伸强度则随着阻燃剂含量的增加不断下降,但降幅不明显;含有15 % IFR的阻燃复合材料,其垂直燃烧等级即可通过UL 94 V-0级测试,显示出复合IFR具有优秀的阻燃效果。