均三嗪衍生物比色识别Cu2+及荧光识别Zn2+

以对氨基苯腈、邻叔丁基苯酚和3,5-二叔丁基水杨醛为原料合成了两种含有均三嗪对称结构的离子探针1和2,通过核磁共振氢谱、核磁共振碳谱、红外、质谱对合成产物进行表征,确认其结构。利用紫外吸收光谱和荧光光谱两种手段分别考察了探针1和探针2在N,N-二甲基甲酰胺（DMF）溶液中对金属离子（Cr³⁺、Mn²⁺、Fe³⁺、Co²⁺、Ni²⁺、Cu²⁺、Zn²⁺、Cd²⁺、Hg²⁺）的识别性能,通过核磁共振氢谱对探针1与Zn²⁺的识别机理进行研究。结果表明,两种探针热稳定性强,探针1溶液中加入Zn²⁺会引起荧光强度的显著增强,抗干扰性强,是一种高选择性识别Zn²⁺的荧光增强型探针;探针2中加入Cu²⁺后溶液由无色变成黄色,紫外光谱长波长处出现新吸收峰,是一种可裸眼识别的、高效的紫外Cu²⁺探针。     

Investigation on the inhibition effect of aspartic acid and Zn2+ ions on carbon steel surface in aqueous solution

A protective film has been formed on the surface of carbon steel in aqueous environment using a synergistic mixture of an environment-friendly inhibitor, aspartic acid, and Zn²⁺. The synergistic effect of aspartic acid (AS) in controlling corrosion of carbon steel has been investigated by gravimetric studies in the presence of Zn²⁺. The formulation consisting of AS and Zn²⁺ has an excellent inhibition efficiency. The results of potentiodynamic polarization revealed that the formulations are of mixed-type inhibitor. Impedance studies of the metal/solution interface indicated that the surface film is highly protective against the corrosion of carbon steel in the aqueous environment. X-ray photoelectron spectroscopic analysis of the protective film showed the presence of the elements iron, nitrogen, oxygen, carbon, and zinc. The spectra of these elements in the surface film showed the presence of oxides/hydroxides of iron(III), Zn(OH)₂, and [Fe(III)/Fe(II)–Zn(II)-AS] complex. Further, surface characterization techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy are used to ascertain the nature of the protective film formed on the carbon steel surface.     

Synthesis of hierarchical dendritic micro–nano structure ZnFe_2O_4 and photocatalytic activities for water splitting

Hierarchical dendritic micro–nano structure Zn Fe_2O_4 have been prepared by electrochemical reduction and thermal oxidation method in this work. X-ray diffractometry, Raman spectra and field-emission scanning electron microscopy were used to characterize the crystal structure, size and morphology. The results show that the sample(S-2) is composed of pure ZnFe_2O_4 when the molar ratio of Zn~(2+)/Fe~(2+)in the electrolyte is 0.35. Decreasing the molar ratio of Zn~(2+)/Fe~(2+), the sample(S-1) is composed of ZnFe_2O_4 and α-Fe_2O_3, whereas increasing the molar ratio of Zn~(2+)/Fe~(2+), the sample(S-3) is composed of ZnFe_2O_4 and Zn O. The lattice parameters of ZnFe_2O_4 are influenced by the molar ratio of Zn~(2+)/Fe: Zn at excess decreases the cell volume whereas Fe at excess increases the cell volume of Zn Fe_2O_4. All the samples have the dendritic structure, of which S-2 has micron-sized lush branches with nano-sized leaves. UV–Vis diffuse reflectance spectra were acquired by a spectrophotometer. The absorption edges gradually blue shift with the increase of the molar ratio of Zn~(2+)/Fe~(2+). Photocatalytic activities for water splitting were investigated under Xe light irradiation in an aqueous olution containing 0.1 mol·L~(-1)Na_2S/0.02 mol·L~(-1)Na_2SO_3 in a glass reactor. The relatively highest photocatalytic activity with 1.41 μmol·h-1· 0.02 g~(-1)was achieved by pure ZnFe_2O_4sample(S-2). The photocatalytic activity of the mixture phase of Zn Fe_2O_4 and α-Fe_2O_3(S-1) is better than ZnF e_2O_4 and ZnO(S-3).     

Enhanced corrosion inhibition behavior of carbon steel in aqueous solution by Phosphoserine-Zn2+ system

The corrosion inhibition effect of carbon steel in aqueous solution was using a synergistic mixture of an environmentally friendly inhibitor system phosphoserine (PS) and Zn²⁺ using gravimetric studies, potentiodynamic polarization, and electrochemical impedance studies. Potentiodynamic polarization studies showed that the inhibitor system is a mixed type inhibitor. Electrochemical impedance studies of the metal/solution interface indicated that the surface film is highly protective against the corrosion of carbon steel in the aqueous solution. X-ray photoelectron spectroscopic analysis of the protective film exhibited the presence of the elements viz., iron, phosphorus, nitrogen, oxygen, carbon, and zinc. The chemical shifts in the binding energies of these elements inferred that the surface film is composed of oxides/hydroxides of iron, Zn(OH)₂, and [Fe(II)/(III)-Zn(II)-PS] complex. Further, the surface examination techniques viz., FTIR, SEM, and AFM studies confirm the formation of an adsorbed protective film on the carbon steel surface. Based on the results obtained, a suitable mechanism of corrosion inhibition is presented.     

电纺zein-SLS纤维膜的制备及其离子吸附性能研究

选用玉米醇溶蛋白（zein）作为鞘层包裹材料、木质素磺酸钠（SLS）作为芯层强化材料,采用同轴电纺技术制备了可有效吸附重金属离子的zein-SLS纤维膜。优化了膜制备工艺条件,确定纺丝电压适宜为14 kV,芯鞘层进料速率比适宜为1∶1。TEM证实,SLS被成功包埋于zein纤维膜中,但其负载量、包埋率和流失率受溶液pH的影响。离子吸附测试结果表明,SLS的加入可强化zein纤维膜对三种金属离子Ni²⁺、Zn²⁺、Cd²⁺的吸附效果,其中对Zn²⁺吸附能力的强化效果最为显著,上述吸附过程符合准二级吸附动力学模型。同时,在酸性条件下,随着pH的上升,zein纤维膜对Ni²⁺、Zn²⁺、Cd²⁺的吸附能力逐渐提高。     

苯并噻唑基修饰的开链Cu2+比色探针的合成及性能

以N-苯基二乙醇胺和2-巯基苯并噻唑为原料通过亲核取代反应合成了一种新型的苯并噻唑基修饰的开链冠醚类化合物1,并用核磁共振氢谱, 核磁共振碳谱及元素分析方法对合成产物进行了表征。利用紫外光谱仪考察了化合物1与多种金属离子（Mn²⁺、Co²⁺、Cu²⁺、Zn²⁺、Ni²⁺ 、Fe³⁺、 Hg²⁺、Cr³⁺、Al³⁺）在乙腈溶液中的光谱变化,并探究了化合物1处理过的滤纸条在水溶液中对金属离子的识别效果,通过核磁共振氢谱讨论了化合物1与金属离子形成配合物的作用机理。实验发现,化合物1的乙腈溶液中添加Cu²⁺后溶液颜色变为棕色,明显区别于添加其他离子;在水溶液中,特制的滤纸条遇到Cu²⁺会呈现黄色,而遇其他离子均无颜色变化。结果表明,化合物1仅对Cu²⁺具有选择性,且能通过裸眼进行识别,是一种高效、简便的Cu²⁺探针。     

Cu2+、Cd2+、Zn2+在高炉水淬渣上的竞争吸附特性

利用等温吸附法考察了高炉水淬渣对Cu²⁺、Cd²⁺、Zn²⁺的单组分吸附和竞争吸附性能。结果表明,单一组分吸附时,金属离子吸附等温线属于“H”形等温线,吸附平衡符合Langmuir吸附等温模型,高炉水淬渣吸附的顺序为Cu²⁺ >Cd²⁺ >Zn²⁺,这与重金属离子电负性、水合离子半径及荷径比等有关。当加入竞争离子后,Cu²⁺的吸附等温线基本维持原来形状,且仍旧与Langmuir吸附等温模型比较相符,而Cd²⁺ 和Zn²⁺的吸附无法与现有等温吸附模型很好地拟合,等温线的形状由于竞争作用也与传统的等温线均不相同,同时各金属离子的吸附量都比单组分的吸附量降低了。吸附动力学过程先是一个快速阶段,然后进入慢速阶段。无论是单组分还是竞争条件下,伪二级动力学方程拟合结果较好,说明高炉水淬渣与Cu²⁺、Cd²⁺、Zn²⁺之间的吸附过程主要是以化学吸附为主。     

Electrochemical impedance studies of molten (0.9Na,0.1K)2SO4-induced hot corrosion of the Ni-based superalloy M38G at 900 °C in air

The hot corrosion behavior of the Ni-based superalloy M38G covered with a film of molten 0.9Na₂SO₄–0.1K₂SO₄ (mole fraction) has been studied by electrochemical impedance spectroscopy at 900 °C in air. For comparison, the corrosion of the alloy immersed in molten (Na,K)₂SO₄ was also examined. The electrochemical impedance spectra in deep molten salt during an initial stage consisted of a semicircle at high frequency and a line at low frequency indicating a diffusion-controlled reaction. With extended immersion the impedance spectra were composed of two capacitive loops, i.e., a small semicircle at high-frequency port, and a large one at low-frequency port. The change of the impedance spectra is related to the formation of a protective scale. Contrary to the corrosion in deep molten salt, the corrosion of the alloy in the presence of a film of fused salt presented the characteristics of two capacitive loops for all the duration of the experimental test. Equivalent circuits representing the corrosion of the alloy in both corrosion conditions are proposed to fit the impedance spectra and electrochemical parameters in the equivalent circuits are also calculated.     

离子液体在甲醇/硫酸介质中对Q235钢表面的缓蚀性能

探究硫酸存在时Q235钢在甲醇中的腐蚀行为,以及离子液体1-丁基-3-甲基咪唑氯盐（[Bmim]Cl）对金属表面的缓蚀作用。通过静态失重法、电化学测试、扫描电子显微镜来测定[Bmim]Cl对Q235钢的缓蚀性能。并利用量子化学计算和分子动力学模拟分析[Bmim]Cl分子的缓蚀机理。在甲醇中随着硫酸含量的增加碳钢的腐蚀速率增加。含有59.51 ml 0.05 mol·L^-1 H₂SO₄的甲醇溶液作为腐蚀介质时,随着[Bmim]Cl浓度升高,缓蚀效率逐渐增大,当浓度为0.6 mol·L^-1时,缓蚀效率达到最佳值,为90.63%,且[Bmim]Cl是主要控制阳极反应的混合抑制剂,SEM分析表明在含有缓蚀剂溶液中浸泡后的Q235钢表面相对于未加缓蚀剂更加平整。前线轨道分析和Fukui指数都表明,离子液体在碳钢表面的吸附位点分布在咪唑环上,与Fe发生化学吸附。分子动力学模拟结果表明缓蚀剂分子以阳离子[Bmim]⁺平行吸附于金属表面,阴离子Cl^-扩散在溶液中的方式达到缓蚀的效果。理论计算结果与实验结果一致,即[Bmim]Cl在甲醇/硫酸水溶液中对Q235钢具有很好的缓蚀作用,为新型离子液体缓蚀剂研究应用奠定了基础。     

废弃虾壳制备改性甲壳素凝胶球及其对金属离子的吸附性能

以虾壳酶解残渣为原料,经5%盐酸脱钙处理4 h后,用45%氢氧化钠和460 W微波辅助脱乙酰处理10 min,得到脱乙酰度为40.4%的改性甲壳素。将改性甲壳素加入海藻酸钠水溶液中混合均匀,挤压滴入氯化钙水溶液中固化12 h,制备得到直径为1.5~3.2 mm的凝胶小球,研究了该凝胶球对Pb²⁺、Cr³⁺、Ni²⁺、Cu²⁺、Co²⁺和Zn²⁺的吸附效果。结果表明：凝胶球对Cu²⁺、Co²⁺和Zn²⁺的吸附效果最好,300 mg/L重金属离子溶液吸附处理8 h是较适宜的吸附条件,此条件下,Cu²⁺、Co²⁺和Zn²⁺的吸附率分别达到94.2%、75.6%和57.3%。在Cu²⁺-Co²⁺-Zn²⁺共存溶液体系中,凝胶球对3种离子的吸附率均有所提高,Cu²⁺、Co²⁺和Zn²⁺的吸附率分别为95.1%、82.5%和67.5%。     

The adsorption of coumarin at solid metal electrodes

The effect of coumarin on the “deposition potential” of a number of metals at solid metal surfaces has been compared with that at a dropping mercury electrode. These results have been used to interpret the adsorption of coumarin on different metal surfaces and to suggest that Tl⁺ and Pb²⁺ ions are specifically adsorbed on mercury and that Tl⁺, Co²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ are specifically adsorbed on their parent metals.     

Extensive intrazeolitic hydrolysis of Zn(II): partial structures of partially and fully hydrated Zn(II)-exchanged zeolite X

Complete Zn²⁺ exchange of two single crystals of zeolite X (Na₉₂Si₁₀₀Al₉₂O₃₈₄) was attempted at 80°C from aqueous Zn(NO₃)₂ (pH=5.5 at 23°C). The structures of crystal 1 (partially dehydrated by evacuation at 23°C and 10⁻³ Torr for two days) and crystal 2 (fully hydrated) were determined by X-ray diffraction techniques in the cubic space group Fd at 23°C (a_o=24.750(5) and 24.872(6) Å, respectively). They were refined using all intensities to the final error indices R₁=0.126 and 0.116 based on the 428 and 348 reflections, respectively, for which F_o>4σ(F_o). Each crystal has about 54 Zn²⁺ ions per unit cell, indicating the uptake of eight excess Zn(OH)₂ molecules. In both crystals, further extensive hydrolysis of Zn²⁺ is seen. Many non-framework oxygens were not found. In crystal 1, 34 Zn²⁺ ions per unit cell occupy conventional cationic sites: 10 are at site I^′, 12 at site II, and 12 at site III^′. Three Zn²⁺ ions each coordinate to a framework oxygen at a non-conventional site in the supercages. Three Zn²⁺ ions at the centers of sodalite cavities each coordinate tetrahedrally to four non-framework oxygens to give (likely) Zn(OH)₂(H₂O)₂ which hydrogen bonds multiply to the zeolite framework. At three supercage positions, about 14 Zn²⁺ ions that do not coordinate to the zeolite framework are found. Per unit cell, 37 H₃O⁺ ions are found: 20 at site I^′ and 17 at site II. It is presumed, considering the number of H₃O⁺ ions, that the latter 14 Zn²⁺ ions are hydrolyzed Zn²⁺ ions, likely hydrated Zn(OH)₂ molecules, some likely bridging. In crystal 2, 33 Zn²⁺ ions per unit cell are found at conventional cationic sites: two at site I, 14 at two different sites I^′, seven at site II, and 10 at site III^′. As in crystal 1, three Zn²⁺ ions each coordinate to a framework oxygen at a non-conventional site in the supercage. At three supercage positions, about 18 Zn²⁺ ions that do not coordinate to the zeolite framework are found. Per unit cell, 40 H₃O⁺ ions are found: 18 at site II^′ and 22 at site II. Only about 16 non-framework oxygens were found per unit cell: eight water molecules in the supercages and, in the sodalite cages, eight hydroxide ions which participate in the formation of two nearly cubic Zn₄(OH)₄⁴⁺ clusters.     

Evaluation of cysteine as environmentally friendly corrosion inhibitor for copper in neutral and acidic chloride solutions

The efficiency of cysteine as a non-toxic corrosion inhibitor for copper metal in 0.6 M NaCl and 1.0 M HCl has been investigated by electrochemical studies. Potentiodynamic polarization measurements and electrochemical impedance spectroscopy “EIS” were used to study the effect of cysteine on the corrosion inhibition of copper. Inhibition efficiency of about 84% could be achieved in chloride solutions. The presence of Cu²⁺ ions increases the inhibition efficiency to 90%. Potentiodynamic polarization measurements showed that the presence of cysteine in acidic and neutral chloride solutions affects mainly the cathodic process and decreases the corrosion current to a great extent and shifts the corrosion potential towards more negative values. The experimental impedance data were analyzed according to a proposed equivalent circuit model for the electrode/electrolyte interface. Results obtained from potentiodynamic polarization and impedance measurements are in good agreement. Adsorption of cysteine on the surface of Cu, in neutral and acidic chloride solutions, follows the Langmuir adsorption isotherm. The adsorption free energy of cysteine on Cu (−25 kJ mol⁻¹) reveals a strong physical adsorption of the inhibitor on the metal surface.     

SYNERGISTIC EFFECT OF N,N-BIS(PHOSPHONOMETHYL) GLYCINE AND ZINC IONS IN CORROSION CONTROL OF CARBON STEEL IN COOLING WATER SYSTEMS

A protective film has been developed on the surface of carbon steel in low chloride aqueous environment using a synergistic mixture of an environmentally friendly phosphonic acid, N,N-bis(phosphonomethyl) glycine (BPMG), and zinc ions. Impedance studies of the metal/solution interface indicated that the surface film is highly protective against the corrosion of carbon steel in the chosen environment. Potentiodynamic polarization studies showed that the inhibitor is a mixed inhibitor. X-ray photoelectron spectroscopic analysis (XPS) of the film showed the presence of the elements iron, phosphorus, nitrogen, oxygen, carbon, and zinc. Deconvolution spectra of these elements in the surface film showed the presence of oxides/hydroxides of iron(III), Zn(OH)₂, and [Zn(II)-BPMG] complex. This inference is further supported by the reflection absorption Fourier transform infrared spectrum of the surface film. Analysis by SEM is presented for both the corroded and protected metal surfaces. Based on all these results, a plausible mechanism of corrosion inhibition is proposed.     

Experimental and computational chemical studies on the cationic furanylnicotinamidines as novel corrosion inhibitors in aqueous solutions

The corrosion inhibition action of three newly synthesized furanylnicotinamidine derivatives namely: 6-[5-{4(dimethylamino)phenyl}furan-2-yl]nicotinamidine(MA-1256), 6-[5-(4-chlorophenyl)furan-2-yl]nicotinamidine(MA-1266), and 6-[5-{4-(dimethylamino)phenyl}furan-2-yl]nicotinonitrile(MA-1250) on carbon steel(C-steel) was investigated in 1.0 mol·L~(-1) HCl solution by weight loss(WL), potentiodynamic polarization(PP), electrochemical impedance spectroscopy(EIS), and electrochemical frequency modulation(EFM)techniques. Morphological analysis was performed on the uninhibited and inhibited C-steel using atomic force microscope(AFM) and Infrared Spectroscopy(ATR-IR) methods. The effect of temperature was studied and discussed. Inspection of experimental results revealed that the inhibition efficiency(IE) increases with the incremental addition of inhibitors and with elevating the temperature of the acid media. The adsorption of furanylnicotinamidine derivatives on C-steel follows Temkin's isotherm. PP studies indicated that the investigated compounds act as mixed-type inhibitors and showed that p-dimethylaminophenyl furanylnicotinamidine derivative(MA-1256) was the most efficient inhibitor among the other studied derivatives with IE reached(95%)at 21 × 10~(-6) mol·L~(-1). MA-1266 is highly soluble in aqueous solution and has non-toxicity profile with LC50 N 37 mg·L~(-1). Thus, MA-1266 can be a promising green corrosion inhibitor candidate with IE N 91% at 21× 10~(-6) mol·L~(-1). The experiments were coupled with computational chemical theories such as quantum chemical and molecular dynamic methods. The experimental results were in good agreement with the computational outputs.     

固相法制备掺杂型高色度CoxM1-xAl2O4/高岭土复合颜料

为了制备低成本、高色度的钴蓝颜料,本文以高岭土为载体,以Al₂O₃和Co₃O₄为主要原料,通过引入ZnO、CaO及MgO不同金属氧化物,采用固相法制备了高色度(Co_xM_1-xAl₂O₄)/高岭土复合颜料(M为Ca²⁺、Mg²⁺或Zn²⁺)。系统考察了研磨时间、煅烧温度、煅烧时间和不同金属氧化物掺量对复合颜料呈色性能的影响规律。研究表明,在煅烧温度1 200 ℃、研磨时间12 h和n(Co²⁺)/n(M²⁺)为3:2时,制得的复合颜料具有最好的呈色性能(L^*=53.68,a^*=7.58,b^*=-62.89)。同时,引入不同的金属元素,可实现对复合颜料颜色的调控,引入Ca²⁺后,所制备的Co_xCa_1-xAl₂O₄复合颜料偏红相,而引入Zn²⁺后,所制备的Co_xZn_1-xAl₂O₄复合颜料偏绿相。通过相关表征,提出了复合颜料的呈色机理,在颜料制备过程中,引入与Co²⁺离子半径接近的Mg²⁺或Zn²⁺,Mg²⁺或Zn²⁺可进入CoAl₂O₄的四面体配位中,部分替代Co²⁺,形成MgAl₂O₄-CoAl₂O₄或ZnAl₂O₄-CoAl₂O₄的固溶体,而引入离子半径较大的Ca²⁺,形成CaAl₂O₄和CoAl₂O₄的均相混合物。最后,将制得复合颜料应用到有机硅耐热涂料中,可以明显提高有机硅涂料的热稳定性。     

4-[(1H-苯并咪唑-2-亚氨基)-甲基]-1,3-苯二醇的合成及金属离子识别研究

以苯并咪唑胺为原料,通过与2,4-二羟基苯甲醛反应合成了标题化合物,并利用IR和NMR对其结构进行表征。通过紫外吸收光谱和荧光光谱研究其对不同金属离子的识别作用。结果表明,金属离子的加入,使目标化合物的紫外吸收光谱和荧光光谱发生了不同程度的变化,尤其是对Zn²⁺的识别能力最佳,具有较强的专一识别能力和抗干扰性,其荧光检出限为3.5×10^-7 mol/L。同时,通过核磁滴定法对目标化合物和Zn²⁺的配位方式进行了探讨。     

溶胶-凝胶法制备Cu-ZnO-ZrO2催化剂：柠檬酸用量对催化剂性能的影响

采用溶胶-凝胶法以铜、锌、锆硝酸盐和柠檬酸为原料,改变柠檬酸用量,制备出一系列Cu-ZnO-ZrO₂催化剂。通过X射线衍射仪（XRD）、热重分析仪（TG-DTG-DTA）、H₂程序升温还原（H₂-TPR）、CO₂程序升温脱附（CO₂-TPD）、红外光谱仪（FTIR）及BET比表面积等表征手段对干凝胶及催化剂理化性能进行测试,并在催化反应活性评价装置上对催化剂的CO₂加氢合成甲醇反应活性进行评价,研究凝胶过程中Cu²⁺、Zn²⁺、Zr⁴⁺与柠檬酸结合方式对催化剂性能的影响。结果表明：改变柠檬酸用量可调控Cu²⁺、Zn²⁺、Zr⁴⁺与羧酸的配位方式,配位能力较强的Cu²⁺、Zn²⁺在凝胶制备过程中参与三维网络的构筑,而配位能力相对较弱的Zr⁴⁺游离于三维网络之外,从而差异化地调控催化剂中活性组分CuO、ZnO、ZrO₂晶粒尺寸大小。当柠檬酸的摩尔量为金属离子摩尔量的1.5倍时,催化剂中的活性成分CuO、ZnO、ZrO₂晶粒尺寸相互匹配,表现出较好的CO₂加氢合成甲醇催化性能。     

缓蚀剂对水基环保免清洗助焊剂缓蚀性能的影响

以丁二酸、苹果酸（w= 2.00%）为活化剂,乙二醇、异丙醇和乙二醇丁醚（w= 3.00%）为助溶剂,聚乙二醇-6000（w= 0.25%）为成膜剂,咪唑（IM）、苯并咪唑（BIA）和苯并三氮唑（BTA）分别为缓蚀剂,配制系列水基免清洗助焊剂。用静态失重法、电化学阻抗谱法和扫描电子显微镜等方法研究了三种缓蚀剂对金属铜的缓蚀作用。结果表明：随三种缓蚀剂含量的增加,缓蚀率均表现出先提高后降低的趋势。其中BTA的添加量为0.08%时,缓蚀率达 88.78%,金属膜电阻R_f 达1.25×10⁶ Ω·cm²,缓蚀效果最佳。研究还表明：缓蚀剂总量为0.08%时,BIA和BTA复配（0.04%BIA + 0.04% BTA）,缓蚀率达94.25%,R_f 达2.26×10⁶ Ω·cm²,显示出明显的缓蚀协同效应。助焊剂铺展实验也表明,复配缓蚀剂的最佳添加量为0.04% BIA和0.04% BTA。     

Zn2+、Ca2+和Mn2+对丙酮丁醇发酵的协同影响

在丙酮丁醇发酵中共同添加0.001g/L ZnSO₄·7H₂O和4.0g/L CaCO₃时,丁醇及总溶剂产量达到14.41g/L和23.69g/L,发酵终点乙酸和丁酸浓度为2.33g/L和1.02g/L。当共同添加0.001g/L ZnSO₄·7H₂O、4.0g/L CaCO₃和0.8g/L MnSO₄·H₂O时,丁醇的比生成速率为0.48g/(g·h),相对于共同添加Zn²⁺和Ca²⁺条件下的丁醇比生成速率0.23g/(g·h)提高了108.69%,而发酵终点乙酸和丁酸浓度分别为1.99g/L和0.54g/L,同比分别降低了14.59%和47.06%。Zn²⁺、Ca²⁺和Mn²⁺ 3种金属离子对丙酮丁醇发酵具有正向协同调控作用。