Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

China Fusion Engineering Test Reactor(CFETR) is an ITER-like fusion engineering test reactor that is intended to fill the scientific and technical gaps between ITER and DEMO.One of the main missions of CFETR is to achieve a tritium breeding ratio that is no less than 1.2to ensure tritium self-sufficiency.A concept design for a water cooled ceramics breeding blanket(WCCB) is presented based on a scheme with the breeder and the multiplier located in separate panels for CFETR.Based on this concept,a one-dimensional(1D) radial built breeding blanket was first designed,and then several three-dimensional models were developed with various neutron source definitions and breeding blanket module arrangements based on the 1D radial build.A set of nuclear analyses have been carried out to compare the differences in neutronics characteristics given by different calculation models,addressing neutron wall loading(NWL),tritium breeding ratio(TBR),fast neutron flux on inboard side and nuclear heating deposition on main in-vessel components.The impact of differences in modeling on the nuclear performance has been analyzed and summarized regarding the WCCB concept design.     

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR

Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor to bridge the gap between ITER and future fusion power plant. As its objectives are to demonstrate generation of fusion power and to realize tritium self-sufficiency, the tritium breeding ratio (TBR) is a key design parameter. In the blanket design and optimization, the structures such as the first wall (FW), cooling plate (CP), stiffening plate (SP), cap and some other design parameters in detailed 3-D model have significant impacts on the tritium breeding performance. Based on a helium cooled solid breeder blanket option for CFETR, the impact analysis of the helium cooled solid blanket structures on tritium breeding performance was performed in this paper. Firstly, the detailed 3D neutronics model was built by using of a CAD to Monte Carlo Geometry conversion tool McCad. Then based on the detailed 3D neutronics model, the impact analyses of the blanket structures on tritium breeding performance were carried out, which include the FW, CP, SP, cap and side wall. By the sensitivity study of the blanket structures on the TBR, it gave the TBR variation trend and references for the blanket design and optimization.     

Neutronics Analysis of Water-Cooled Ceramic Breeder Blanket for CFETR

In order to investigate the nuclear response to the water-cooled ceramic breeder blanket models for CFETR, a detailed 3D neutronics model with 22.5otorus sector was developed based on the integrated geometry of CFETR, including heterogeneous WCCB blanket models,shield, divertor, vacuum vessel, toroidal and poloidal magnets, and ports. Using the Monte Carlo N-Particle Transport Code MCNP5 and IAEA Fusion Evaluated Nuclear Data Library FENDL2.1,the neutronics analyses were performed. The neutron wall loading, tritium breeding ratio, the nuclear heating, neutron-induced atomic displacement damage, and gas production were determined.The results indicate that the global TBR of no less than 1.2 will be a big challenge for the watercooled ceramic breeder blanket for CFETR.     

Updated neutronics analyses of a water cooled ceramic breeder blanket for the CFETR

The water cooled ceramic breeder (WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor (CFETR).Some updating of neutronics analyses was needed,because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket,including the optimization of radial build-up and customized structure for each blanket module.A 22.5 degree toroidal symmetrical torus sector 3D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses.The tritium breeding capability,nuclear heating power,radiation damage,and decay heat were calculated by the MCNP and FISPACT code.The results show that the packing factor and 6Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency.The nuclear heating power of the blanket under 200 MW fusion power reaches 201.23 MW.The displacement per atom per full power year (FPY) of the plasma-facing component and first wall reach 0.90 and 2.60,respectively.The peak H production rate reaches 150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module # 3.The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m-3 at that time.The decay heat density of the blanket modules slowly decreases to lower than 10 W m-3 in more than ten years.     

Thermal Hydraulic Design and Analysis of a Water-Cooled Ceramic Breeder Blanket with Superheated Steam for CFETR

The water-cooled ceramic breeder blanket (WCCB) is one of the blanket candidates for China fusion engineering test reactor (CFETR). In order to improve power generation efficiency and tritium breeding ratio, WCCB with superheated steam is under development. The thermal-hydraulic design is the key to achieve the purpose of safe heat removal and efficient power generation under normal and partial loading operation conditions. In this paper, the coolant flow scheme was designed and one self-developed analytical program was developed, based on a theoretical heat transfer model and empirical correlations. Employing this program, the design and analysis of related thermal-hydraulic parameters were performed under different fusion power conditions. The results indicated that the superheated steam water-cooled blanket is feasible.     

CFETR氦冷固态增殖剂包层产氚性能研究及优化

氦冷固态增殖剂包层是中国聚变工程实验堆（CFETR）的3种候选包层概念之一。本文基于中国核工业西南物理研究院提出的一种氦冷固态增殖剂包层概念,通过蒙特卡罗输运程序MCNP5建立了包层三维中子学模型,探究了不同几何布置方案及结构设计参数对包层产氚性能的影响,得到了全堆氚增殖比（TBR）及极向各包层模块产氚分布,并由优化后的模型得到了包层模块核热分布。结果表明,优化后的TBR达到1.177,满足氚自持的最低要求。     

Toward the ultimate goal of tritium self-sufficiency: Technical issues and requirements imposed on ARIES advanced power plants

Due to the lack of external tritium sources, all fusion power plants must demonstrate a closed tritium fuel cycle. The tritium breeding ratio (TBR) must exceed unity by a certain margin. The key question is: how large is this margin and how high should the calculated TBR be? The TBR requirement is design and breeder-dependent and evolves with time. At present, the ARIES requirement is 1.1 for the calculated overall TBR of LiPb systems. The Net TBR during plant operation could be around 1.01. The difference accounts for deficiencies in the design elements (nuclear data evaluation, neutronics code validation, and 3D modeling tools). Such a low Net TBR of 1.01 is potentially achievable in advanced designs employing advanced physics and technology. A dedicated R&D effort will reduce the difference between the calculated TBR and Net TBR. A generic breeding issue encountered in all fusion designs is whether any fusion design will over-breed or under-breed during plant operation. To achieve the required Net TBR with sufficient precision, an online control of tritium breeding is highly recommended for all fusion designs. This can easily be achieved for liquid breeders through online adjustment of Li enrichment.     

CFETR氦冷陶瓷增殖包层中子学分析

为满足中国聚变工程实验堆(CFETR)包层的应用要求,本文提出氦冷陶瓷增殖(HCCB)包层方案。为验证HCCB包层设计方案的合理性与可行性,采用三维蒙特卡罗粒子输运程序MCNP,计算和分析了HCCB包层方案的氚增殖比、中子壁负载、中子通量密度、核热、辐照损伤等中子学特性。结果表明,HCCB包层方案满足氚自持要求,中子通量密度和核热分布合理,屏蔽性能良好,基本满足设计要求。     

超临界水冷固态实验包层中子学与热工水力特性研究

基于国际热核聚变实验堆(ITER)实验包层方案,提出了一个超临界水冷固态实验包层概念设计方案。设计采用Be作为中子倍增剂,Li4SiO4作为氚增殖剂,CLAM钢作为结构材料。包层第一壁采用多层盘道设计以提高第一壁出口温度,内部采用增殖剂与中子倍增剂分层布置以提高热沉积与氚增殖率。为验证包层设计的可行性,分析计算了三维包层氚增殖率与热沉积的分布,然后根据中子学计算得到的结果对超临界水冷固态实验包层进行了数值模拟研究。结果表明:包层功率密度分布较合理;氚增殖率满足运行中氚自持的要求;在冷却剂出口温度达到500℃条件下材料温度不超过限值。该设计方案能满足中子学设计与热工水力的要求。     

中国聚变工程试验堆包层的核热耦合效应研究

本文以中国聚变工程试验堆（CFETR）的氦冷固态包层和水冷固态包层为研究对象,基于蒙特卡罗程序MCNP和计算流体力学程序FLUENT,利用3D-1D-2D耦合方法和伪材料方法,分别对200 MW的氦冷固态包层和水冷固态包层及1.5 GW的水冷固态包层方案进行了核热耦合计算分析。研究结果表明,金属铍的热散射效应和轻水密度是聚变包层核热耦合效应的主要来源,核热耦合效应对氦冷固态包层的影响可忽略,对水冷固态包层的氚增殖比和温度分布有一定程度的影响。     

Effect of Nuclear Data Libraries on Tritium Breeding in a (D–T) Fusion Driven Reactor

In design a Deuterium–Tritium (D–T) fusion driven hybrid reactor, neutronics and nuclear data libraries have an essential role for reliable neutronics calculations. Therefore, nuclear data libraries are very important to calculate of the neutronic parameters and selection of tritium breeder materials to be used in the blanket. In this study tritium breeding performances of candidate tritium breeding materials, namely, Li₂O, LiH, Li₂TiO₃, Li₂ZrO₃ and Li₄SiO₄ in a (D–T) driven fusion–fission (hybrid) reactor is investigated based on three dimensional (3-D) and one dimensional (1-D) neutronic calculations. 3-D and 1-D neutron transport calculations are performed with Monte Carlo transport code (MCNP 4C), SCALE 5 and ANISN nuclear data codes to determine the tritium breeding ratio (TBR) of the blanket. The effects of different nuclear data libraries on TBR are examined and TBR calculation results are comparatively investigated.     

高氚增殖比包层的设计及热工水力分析

本文设计了一种高氚增殖比包层(HBRB),该包层采用多孔U-10Zr合金作为中子倍增剂,Li4SiO4球床作为增殖剂,低活化马氏体(RAFM)钢作为结构材料。在详细研究包层加工工艺、流量分配、中子性能等问题的基础上,完成了包层内部详细结构设计。利用中子学软件分析计算了包层的氚增殖比(TBR)和热沉积分布,并根据计算结果对包层进行热力耦合分析。结果表明:包层TBR较高,且核性能稳定;冷却剂的流量分配情况和压降合理;包层内各组件冷却充分,温度和结构材料热应力不超过限值。     

Preliminary thermal hydraulic safety analysis of water-cooled ceramic breeder blanket for CFETR

The Chinese fusion engineering test reactor (CFETR) was expected to bridge from the international thermonuclear experimental reactor (ITER) to the demonstration fusion reactor (DEMO). The water-cooled ceramic breeder (WCCB) blanket is one of the blanket candidates for CFETR. In this paper, preliminary thermal hydraulic safety analyses have been carried out using the system safety analysis code RELAP5 originally developed for light water fission reactors. The pulse operation and three typical loss of coolant accidents (LOCAs), namely, in-vessel LOCA, in-box LOCA, and ex-vessel LOCA, were simulated based on steady-state initialization. Simulation results show that important thermal hydraulic parameters, such as pressure and temperature can meet the design criterion which preliminarily verifies the feasibility of the WCCB blanket from the safety point of view.     

CFETR水冷陶瓷增殖剂包层模块产氚率实验验证

水冷陶瓷增殖剂（WCCB）包层作为中国聚变工程试验堆（CFETR）候选包层之一，承担着氚增殖、核热提取、屏蔽等重要涉核功能，其中子学设计的可靠性直接影响CFETR氚自持目标的实现。为验证中子学设计工具，即MCNP和FNEDL3.0数据库，在WCCB包层中子学设计中的可靠性，基于研制出的WCCB包层模块，在DT中子环境下开展中子学实验，对以产氚率（TPR）为代表的中子学参数进行了模拟值（C）和实验值（E）对比分析。结果表明，模块中轴线位置处TPR的C/E为0.97?1.08，而模块边缘位置处TPR的C/E为0.65?0.82；模块钛酸锂层边缘区197Au（n，γ）198Au反应率的C/E为0.72?0.90，表明模块边缘区存在非期望的散射中子，导致该区TPR模拟值和实验值偏离较大。     

cosRMC复杂曲面开发及在聚变中子学的应用

中国聚变工程实验堆（CFETR）是我国自主设计和研制的重大科学工程,CFETR旨在与ITER相衔接和补充,为研制DEMO级别聚变堆电站提供必要的技术。蒙特卡罗方法在聚变中子学与屏蔽设计等方面具有重要作用。本文基于自主化蒙特卡罗程序cosRMC,研究了蒙特卡罗复杂曲面建模的数学模型和计算方法,开发了复杂曲面建模功能,并通过PPCS（power plant conceptual study）模型验证了该功能实现的正确性。然后构建了CFETR的三维精细化模型,并利用该模型对CFETR包层设计中的关键中子学参数进行计算分析。结果表明,cosRMC对中子学参数氚增殖比、中子壁载荷和核热沉积的计算结果与MCNP的计算值吻合良好,相对偏差均小于5%,满足工程设计需求。研究证明了cosRMC应用于聚变堆包层中子学分析的正确性和有效性。CFETR中子学参数的计算分析,也为其设计和优化提供了参考。     

Conceptual design of a water cooled breeder blanket for CFETR

China Fusion Engineering Test Reactor (CFETR) is an ITER-like superconducting tokamak reactor. Its major radius is 5.7 m, minor radius is 1.6 m and elongation ratio is 1.8. Its mission is to achieve 50–200 MW of fusion power, 30–50% of duty time factor, and tritium breeding ratio not less than 1.2 to ensure the self-sufficiency. As one of the breeding blanket candidates for CFETR, a water cooled breeder blanket with superheated steam is proposed and its conceptual design is being carried out. In this design, sub-cooling water at 265 °C under the pressure of 7 MPa is fed into cooling plates in breeding zone and is heated up to 285 °C with saturated steam generated, and then this steam is pre-superheated up to 310 °C in first wall (FW), final, the pre-superheated steam coming from several blankets is fed into the other one blanket to superheat again up to 517 °C. Due to low density of superheated steam, it has negligible impact on neutron absorption by coolant in FW so that the high energy neutrons entering into breeder zone moderated by water in cooling plate help enhance tritium breeding by ⁶Li(n,α)T reaction. Li₂TiO₃ pebbles and Be₁₂Ti pebbles are chosen as tritium breeder and neutron multiplier respectively, because Li₂TiO₃ and Be₁₂Ti are expected to have better chemical stability and compatibility with water in high temperature. However, Be₁₂Ti may lead to a reduction in tritium breeding ratio (TBR). Furthermore, a spot of sintered Be plate is used to improve neutron multiplying capacity in a multi-layer structure. As one alternative option, in spite of lower TBR, Pb is taken into account to replace Be plate in viewpoint of safety. In this contribution, study on neutronics and thermal design for a water cooled breeder blanket with superheated steam is reported.     

Neutronic analysis of an inertial fusion energy breeder with SiCf/SiC

Neutronic performance of a blanket driven ICF (Inertial confinement fusion) neutron based on SiC_f/SiC composite material is investigated for fissile fuel breeding. The investigated blanket is fueled with ThO₂ and cooled with natural lithium or (LiF)₂BeF₂ or Li₁₇Pb₈₃ or ⁴He coolant. MCNP4B Code is used for calculations of neutronic data per DT neutron. Calculations have show that values of TBR (tritium breeding ratio) being one of the main neutronic paremeters of fusion reactors are greater than 1.05 in all type of coolant, and the breeder hybrid reactor is self-sufficient in the tritium required for the DT fusion driver. Calculations show that natural lithium coolant blanket has the highest TBR (1.298) and M (fusion energy multiplication) (2.235), Li₁₇Pb₈₃ coolant blanket has the highest FFBR (fissile fuel breeding ratio) (0.3489) and NNM (net neutron multiplication) (1.6337). ⁴He coolant blanket has also the best Γ (peek-to-average fission power density ratio) (1.711). Values of neutron leakage out of the blanket in all type of coolants are quite low due to SiC reflector and B₄C shielding.     

Investigation of the packing structure of pebble beds by DEM for CFETR WCCB

Li₂TiO₃/Be₁₂Ti mixed pebble beds with multi-sized particles are one of the potential candidates for the WCCB (water-cooled ceramic breeder blanket) of the CFETR (China Fusion Engineering Test Reactor). To meet the neutronics requirements of a WCCB, a study of the packing structure of the concerned pebble bed is necessary. In this paper, the discrete element method (DEM) is applied to produce a prototypical blanket pebble bed by directly simulating the contact state of each individual particle using basic interaction laws. According to the current simulation, the packing factor of a mono-sized pebble bed is 0.62–0.64, while the value will become more than 0.75 for Li₂TiO₃/Be₁₂Ti mixed breeding pebble bed with a diameter ratio of not less than 5 as well as an appropriate mixed volume ratio, and thus can meet the neutronics requirements.     

Effects of lithium burn-up on TBR in DEMO reactor SlimCS

Lithium in a breeding blanket is burned up through neutron nuclear reactions in fusion DEMO reactors. Effects of decrease of solid breeder materials due to lithium burn-up on tritium breeding ratio (TBR) are not systematically calculated in the past. For the SlimCS blanket design, TBR is calculated taking into account the lithium burn-ups by one dimensional Sn radiation transport calculation code ANISN in this study. The ⁶Li burn-ups are 8–79% after 10-year operation. TBR due to ⁶Li decreases to 40% of the initial one in some layer, while it increases in some layers. The TBR integrated over all the blanket decreases to around 96% of the initial one. The study makes it clear that the reduction of the TBR due to the lithium burn-up is not so large.