共查询到20条相似文献,搜索用时 93 毫秒
1.
基于Pspice的八阶巴特沃斯低通滤波器设计与优化 总被引:1,自引:0,他引:1
介绍了低通滤波器的原理,采用有源滤波器的快速实用设计方法设计了八阶巴特沃斯低通滤波器,并用Pspice进行了电路仿真分析和优化设计,仿真结果与实际测试基本吻合,对滤波器的设计具有实际指导意义。 相似文献
2.
3.
4.
微波电路的仿真和设计 总被引:1,自引:0,他引:1
仿真软件越来越广泛地应用于微波电路设计中。介绍了微波电路与系统仿真软件Serenade8.5的功能和应用,并以微波低通滤波器的仿直和设计为例说明了它的使用。以巴特沃斯原型滤波器为基础,首先分析了它的特性,然后对其进行优化,得到满足设计目标的低通滤波器。 相似文献
5.
本文介绍了如何应用PSpice仿真软件辅助设计"模拟电子技术"课程中有源低通滤波器这一难点内容。给出一阶和二阶有源低通滤波器的传递函数及电路参数的计算方法。本文通过一个项目实例进行电路结构选择、阶数计算和PSpice电路仿真,设计出五阶巴特沃斯低通滤波器。电路的测试结果与仿真结果基本一致,最后还对电路的噪声进行分析。 相似文献
6.
7.
本文介绍如何应用巴特沃斯(Butterwonh)响应的3分贝下降k和q值参数表,设计低通滤波器,带通滤波器。以工程上所采用的实例来说明其设计方法。 相似文献
8.
设计了一个巴特沃斯低通滤波器,并用电路仿真软件对其进行了仿真,幅频特性和相频特性较好,通带内频率特性平坦,且不存在波浪起伏现象,阻带内的曲线缓缓变化到零,所得指标能满足要求,能达到较好的滤波效果。 相似文献
9.
基于NI Multisim 10的有源滤波器的设计与仿真 总被引:1,自引:0,他引:1
有源滤波器因其体积小、重量轻、成本低、可靠性高、提供增益放大、设计标准化、模块化、便于集成等突出的优点,在信号处理中有着广泛的应用。在对MFB(无限增益多路反馈)滤波电路的传递函数分析基础上,由2阶MFB阶低通滤波电路级联的方法构建了有源低通滤波器,用查表法设计了基于巴特沃斯逼近的8阶有源低通滤波器,并用NIMuhisim10软件对设计的滤波器的交流特性进行了仿真分析,其交流特性符合设计理论,具有一定的参考价值。 相似文献
10.
肖锦龙 《智能计算机与应用》2021,11(5):179-182
频域图像增强是将图像通过变换函数从空域转换为频域,在频域空间里对图像进行滤波处理实现图像增强,再由逆变换函数转换回空域图像的过程.巴特沃斯滤波是频域滤波图像增强的一种.本文对图像增强知识、巴特沃斯滤波器及巴特沃斯低通滤波器算法的实现进行详细的介绍,通过在matlab中对原图和加噪图进行滤波仿真实验,分析实验结果,得出结论. 相似文献
11.
《Microwave Theory and Techniques》1980,28(8):865-874
The transmission characteristics and a design method are presented for a transmission-line Iow-pass filter with multiple pairs of coincident zeros in the finite frequency of the passband and multiple pairs of coincident poles in the finite frequency of the stopband and for a transmision-line low-pass filter with Butterworth characteristic in the passband and multiple pairs of coincident poles in the finite frequeney of the stopband. The former transmission-line low-pass filter shows an improved skirt attenuation performance and delay characteristic than a Chebyshev transmission-line low-pass filter in the same network degree. The latter type of transmission-line low-pass filter shows an improved skirt attenuation performance in comparison to a Butterworth transmission-line low-pass filter in the same network degree, it is positioned about in the middle between a Butterworth type and a Chebyshev type, the delay characteristic is improved considerably in comparison to the Chebyshev type, and the characteristic is close to that of the Butterworth type. With this design method, the connecting unit elements in addition to the stubs contribute to the attenuation response. The design example is shown on the basis of a concrete specification, and it is shown that the obtained attenuation strictly fulfills the specification. 相似文献
12.
13.
14.
15.
16.
基于Matlab的模拟滤波器设计与仿真 总被引:1,自引:0,他引:1
巴特沃思、切比雪夫模拟低通滤波器通常是设计模拟高通、带通和带阻滤波器的原型,先按给定频率响应巴特沃思、切比雪夫低通Ha(s)逼近,然后由选定Ha(s)实现二端口网络的电路结构和参数值。在此对达林顿T型和П型电路结构的滤波器元件参数进行了编程计算,并对其系统函数的幅频特性进行仿真。仿真结果符合设计要求,该方法便捷,程序具有可扩展性。 相似文献
17.
巴特沃斯数字陷波滤波器的设计 总被引:2,自引:1,他引:1
随着数字技术的发展,数字滤波器在许多领域得到广泛的应用。研究一种在Matlab语言环境下设计IIR数字陷波滤波器的方法,在数字陷波滤波器设计过程中,先进行模拟低通滤波器的设计,然后进行模拟低通/模拟带阻滤波器转换,最后采用双线性变化法将模拟陷波滤波器转化成数字陷波滤波器。提出一种用所有零点和极点来表达数字陷波器传递函数的方法,同时给出以巴特沃斯模拟低通为原型设计数字陷波滤波器的程序。 相似文献
18.
The maximum error between the input and output signals of filters is bounded. This bound is used to develop low-pass filter design procedures based on time domain errors. This technique is applied to phase-corrected Butterworth and Chebyshev filters. 相似文献
19.
一种新的高阶全极点TC低通滤波器 总被引:2,自引:0,他引:2
提出了一种高阶全极点运算跨导放大器(OTA)或跨导器(T)低通滤波器设计方法。基于系统函数的直接模拟,得到了具有最少有源元件的全极点低通滤波器。该滤波器具有高截止频率、与MOS工艺兼容、便于单片集在等优点。给出了Butterworth最平坦型低通滤波器的设计实例和PSPICE模拟分析。 相似文献