比特交织IRA码编码调制

提出了不规则重复累积（IRA）码实现比特交织编码调制（BIRACM）的设计方案,并在AWGN和Rayleigh平衰落信道下进行了仿真。仿真结果表明：BIRACM的性能优于传统的网格编码调制和比特交织编码调制。     

基于BICM的高效编码协作方案及性能分析

 提出一种基于比特交织编码调制(BICM)的高效编码协作(CC)方案,该方案中协作用户编码比特分为两帧,每一帧都通过BICM调制发送,通过结合比特交织器满足高阶调制星座符号的不同比特经历的衰落独立。一方面,论文分析了该协作方案在不同信道下的成对错误概率,并进一步推导了错误比特概率上界。理论分析以及仿真结果都表明：准静态衰落信道下,基于BICM的高谱效率编码协作方案仍然可以获得完全分集;而快衰落信道下,编码协作没有分集。另一方面,论文针对提出CC方案中映射方式以及交织器的设计进行研究,得出GRAY映射仍然是协作用户采用的最佳映射,且两帧的交织器不同更利于提高性能。     

NGB-W系统中基于星座旋转的BICM的实现与性能分析

下一代无线广播网(Next Generation Broadcast-Wireless,NGB-W)中,利用复平面星座点的星座旋转以及星座点的同相分量与正交分量的交织,提出了一种更为有效的比特交织编码调制(Bit Interleaved Coded Modulation,BICM)技术方案.发送端采用这种比特交织编码调制技术,接收端可以通过引入信号空间分集来提升系统性能.仿真结果表明:由星座旋转带来的系统性能增益随信道的不同、调制阶数的不同以及LDPC编码率的不同而产生差异.     

基于TPC码的TPC-PPM编码调制及其在湍流下的仿真分析

针对大气光通信脉冲位置调制(PPM)调制方式与普通纠错编码结合有效性差的问题,在分析大气无线光通信信道特性和PPM符号形式的基础上,提出了具有良好抗衰落性能和高功率利用率的Turbo乘积码(TPC)-PPM编码调制机制.研究了该机制下比特交织离散连续错误能力,并导出了适合软输入输出(SISO)迭代译码的PPM软解调置信...     

高频谱效率LDPC编码调制系统

低密度校验(low-density parity-check,LDPC)码近年来成为纠错码领域的研究热点。基于LDPC码以及比特交织编码调制(bit-interleaved coded modulation,BICM)的概念,针对无线带宽受限信道,提出了一种具有较高编码增益和频谱效率的联合编码调制方案。高斯信道和瑞利衰落信道下的仿真均显示了该方案的良好性能。     

比特交织编码协同方案及性能分析

在慢衰落信道条件下,为提高误码率性能,提出一种比特交织编码协同方案,用户或协同伙伴的编码数据,相邻两帧的打孔或者未打孔部分分别通过比特交织器进行交织,然后通过BPSK调制并按发送方案和划分时隙进行发送。推导了比特交织编码协同方案在慢衰落信道条件下的成对错误概率,仿真证明,此方案能够获得三阶完全分集。     

网格编码调制在卫星高速数据传输中的应用

首先对网格编码调制(Trellis Coded Modulation,TCM)进行了系统概述,重点讨论了网格编码调制技术的基本特点、集合分割映射原理及Viterbi译码算法,并对TCM在AWGN信道中的性能进行了仿真,由此论证了网格编码调制技术在功率和带宽受限的卫星高速数据传输中的应用。     

高阶相位调制的调制分集

研究了高阶相位调制的调制分集,分析了调制分集对比特交织空时编码调制迭代译码(BI-STCM-ID)系统性能的影响,得到了引入调制分集后系统的解码比特度量的解析表达式。理论分析和仿真结果表明,调制分集改善了BI-STCM-ID系统在Rayleigh信道下的性能,同时,空时分集与调制分集的结合,对改善快衰落信道和慢衰落信道的性能具有相互补充的效果。     

基于LDPC码的BICM系统性能分析

低密度校验码(LDPC)由于其编码增益高、译码速度快、性能接近香农限的优点,目前得到学术界的广泛关注.文中简单介绍了LDPC码及其译码算法,在此基础上结合比特交织编码调制(BICM)系统,并在算法上作出了相应改进.仿真结果表明,在高斯信道、充分交织瑞利信道、相关瑞利衰落信道下,此算法正确有效.     

Turbo-TCM系统中几种交织器的性能研究

研究了Turbo码与网格编码调制(TCM)相结合的Turbo-TCM技术,将Turbo码中三类奇偶交织器的设计分别应用到Turbo-TCM中,并在Awgn信道和Rayleigh衰落信道下,对采用三种不同交织方式、不同帧长Turbo-TCM的性能进行了仿真。仿真结果表明,短帧条件下,Awgn信道中采用确定性奇偶交织器的Turbo-TCM性能最优,而Rayleigh衰落信道中三种交织方式的Turbo-TCM性能相近。长帧条件下,Awgn信道和Rayleigh衰落信道中,基于随机奇偶交织器的Tur-bo-TCM性能最优。     

一种面向物联网的轻量级增强型长距离物理层设计方法

为了提高LoRa在衰落信道下的误码率性能,该文设计了一种轻量级的增强型长距离(EnLoRa)物理层。首先,采用循环码移位键控(CCSK)作为纠错码,级联对角矩阵交织和啁啾扩频(CSS)调制技术,构造了一种新的比特交织编码调制(BICM)结构。然后,基于该结构,提出了一种基于比特对数似然比信息的软CSS解调和软译码算法,并将译码输出后的外信息作为先验信息反馈至解调模块,进行迭代译码。仿真结果表明,与相同码率的LoRa系统对比,EnLoRa系统在高斯信道下的编码增益提高了0.8 dB,在瑞利信道下的编码增益提高了7 dB。在此基础之上,通过多次迭代译码,还可以获得最大2.5 dB的额外收益。时间复杂度增加不到10%,空间复杂度增幅可忽略不计。该方法可望进一步降低物联网节点的功耗,在室内、市区和工业等复杂多径场景具有较大的应用价值。     

Coded modulation for a coherent DS-CDMA system employing an MMSE receiver in a fading channel

Previous results have shown that high rate codes tend to yield a lower average bit-error rate than low rate codes when employing a minimum mean-square error (MMSE) receiver for a direct-sequence code-division multiple-access (CDMA) system in either an additive white Gaussian noise channel or a flat Rayleigh fading channel. we consider the use of larger signal constellations with both trellis-coded modulation and bit-interleaved coded modulation (BICM) to determine if further gains can be achieved in either the Rayleigh or Ricean fading channel. The average bit-error probability is derived for both coding schemes using the general Ricean fading channel model, based upon the common assumptions of infinite interleaving, perfect channel state information, and optimal MMSE receiver coefficients. New bounds are presented for BICM with 8-PSK and 16-QAM symbols, which take advantage of the symmetries inherent in the signal constellations with Gray code mapping. In addition, simulation results are presented which show the important effect a finite interleaving delay constraint has on the comparison of various codes. The results show that there are cases when coded modulation does yield a significant improvement in performance for a CDMA system using an MMSE receiver, compared to standard convolutional coding. However, the best coding strategy depends upon several factors, including the nature of the fading process (Rayleigh or Ricean), the operating signal-to-noise ratio, the interleaving delay constraint, the time-variability of the channel, the number of users in the system, and the severity of the near-far problem.     

改进交织的单层极化码高阶编码调制系统

极化码作为一种新型编码方式,被采纳为5G通信中的短码方案。本文将极化码应用到比特交织编码调制（Bit-Interleaved Coded Modulation,BICM）系统,优化交织器的设计,提出了一种新型交织算法。相比于现有的交织算法,新型交织算法的提出是基于比特信道可靠性衡量参数,将高可靠性的比特信道与低可靠性的比特信道交错设计,按照高可靠性信道对低可靠性信道辅助译码的方式,提高极化码的纠错性能。由于新型交织算法只存在于比特信道可靠度参数的简单排序,在复杂度上没有明显增加。仿真结果表明:新型交织算法具有优异的性能,当误码率为10-5,码长为256时,采用新型交织算法的极化码BICM系统与LDPC码的BICM系统相比大约有1.51 dB的增益。      

Analysis of the pairwise error probability of noninterleaved codeson the Rayleigh-fading channel

The majority of previous analytical studies of signal-space coding techniques (includes trellis and block codes) on the Rayleigh-fading channel have assumed ideal interleaving. The effect of finite interleaving on the performance of different coding schemes has been studied only by simulation In this paper we first derive a maximum likelihood (ML) decoder for codewords transmitted over a noninterleaved Rayleigh flat fading channel, followed by an exact expression for the pairwise error event probability of such a decoder. It includes phase shift keying (PSK), quadrature amplitude modulation (QAM) signal sets, trellis coded modulation (TCM) and block coded modulation (BCM) schemes, as well as coherent (ideal channel state information) and partially coherent (e.g., differential, pilot tone, etc.) detection. We derive an exact expression for the pairwise event probability in the case of very slow fading-i.e., the fading experienced by all the symbols of the codeword is highly correlated. We also show that the interleaving depth required to optimize code performance for a particular minimum fading bandwidth can be approximated by the first zero of the fading channel's auto-correlation function     

Concatenated space-time block coding with trellis coded modulation in fading channels

Trellis coded modulation (TCM) is a bandwidth efficient transmission scheme that can achieve high coding gain by integrating coding and modulation. This paper presents an analytical expression for the error event probability of concatenated space-time block coding with TCM which reveals some dominant factors affecting the system performance over slow fading channels when perfect interleavers are used. This leads to establishing the design criteria for constructing the optimal trellis codes of such a concatenated system over slow flat fading channels. Through simulation, significant performance improvement is shown to be obtained by concatenating the interleaved streams of these codes with space-time block codes over fading channels. Simulation results also demonstrate that these trellis codes have better error performance than traditional codes designed for single-antenna Gaussian or fading channels. Performance results over quasi-static fading channels without interleaving are also compared in this paper. Furthermore, it is shown that concatenated space-time block coding with TCM (with/without interleaving) outperforms space-time trellis codes under the same spectral efficiency, trellis complexity, and signal constellation.     

Adaptive interleaver based on rate-compatible punctured convolutional codes

This letter focuses on the design of an adaptive Bit- Interleaved Coded Modulation (BICM) scheme for frequency selective slow fading channels where the transmitter has certain knowledge of the channel response. In particular, we consider the design of the interleaver stage for a specific convolutional code operating with OFDM modulation. The adaptive interleaver uses the puncturing tables of the Rate-Compatible Punctured Convolutional Codes (RCPC codes) to rearrange the bits as a function of the fading values and the specific constellation. The performance of different interleavers are compared, revealing that the adaptive RCPC-based interleaver produces larger Euclidean distances between the received codewords and reduces the packet error rate (PER), specially when the number of deep-faded subcarriers increases. Numerical results also evidence the importance of the interleaver choice when comparing the performance of different power allocation strategies.     

PERFORMANCE EVALUATION OF LOW DENSITY PARITY CHECK CODES FOR DIGITAL RADIO MONDIALE （DRM） SYSTEM

In Digital Radio Mondiale （DRM） system, achieving good audio quality becomes a challenge due to its limited band-width of 9 or 10kHz and the very bad lading channels. Therefore, DRM needs highly efficient channel coding schemes. This paper, proposes the schemes which use the Low-Density Parity-Check （LDPC） coded Bit-Interleaved Coded Modulation （BICM） schemes for the implementation of DRM systems. Simulation results show that the proposed system is more efficient than the Rate Compatible Punctured Convolutional （RCPC） coded DRM system on various broadcast channels, and may be recommended as a coding technology for Digital Amplitude Modulation Broadcasting （DAMB） systems of China.     

Concatenated Trellis Coded Modulation for Quasi-Static Fading Channels

In this paper, we present a novel concatenated trellis coded modulation (CTCM) scheme for limited diversity order fading channels. Examples for such channels include those encountered in indoor wireless networks like IEEE 802.11. It is first shown that when the diversity order afforded by the channel is fixed, bit interleaved coded modulation (BICM) is no longer the best way to encode. We then develop CTCM, which is superior to both BICM and conventional TCM of similar complexities. Unlike conventional TCM where convolutional codes are designed over modulated signal sets, CTCM has TCM concatenated to short length inner codes. Each trellis branch in the TCM now corresponds to a short block-code. We discuss design of good inner codes that allow for simple decoders. CTCM design incorporates useful features of both BICM and conventional TCM. Code design is explained with examples. Simulation results and information theoretic supporting the arguments are shown.