pH-sensitive hydrogels based on semi-interpenetrating network (semi-IPN) of chitosan and polyvinyl pyrrolidone for clarithromycin release

The aim of this study was to develop a pH-sensitive chitosan/polyvinyl pyrrolidone (PVP) based controlled drug release system for clarithromycin. The hydrogels were synthesized by cross-linking chitosan and PVP blend with glutaraldehyde to form a semi-interpenetrating polymer network (semi-IPN). These semi-IPNs were studied for their content uniformity, swelling index (SI), mucoadhesion, wettability, in vitro release and their release kinetics. The hydrogels showed more than 97% content of clarithromycin. These hydrogels showed high swelling and mucoadhesion under acidic conditions. The swelling may be due to the protonation of a primary amino group on chitosan. In acidic condition, chitosan would be ionized, and adhesion could have occurred between the positively charged chitosan and the negatively charged mucus. In the alkaline condition, less swelling and mucoadhesion was noticed. In vitro release study revealed that formulation containing chitosan (2% w/v) and PVP (4% w/v) in the ratio of 21:4 showed complete drug release after 12?h. Release profile showed that all the formulations followed non-Fickian diffusion mechanism. The cross-linking and compatibility of clarithromycin in the formulation was studied by Fourier transform infrared (FTIR) spectroscopic analysis, differential scanning calorimetry (DSC) and powder X-ray diffraction (p-XRD) study, which confirmed proper formation of semi-IPN and stability of clarithromycin in the formulations. The surface morphology of semi-IPN was studied before and after dissolution in simulated gastric fluid (SGF, pH 1.2) which revealed pores formation in membrane after dissolution. The results of study suggest that semi-IPNs of chitosan/PVP are potent candidates for delivery of clarithromycin in acidic environment.     

pH-sensitive hydrogels based on semi-interpenetrating network (semi-IPN) of chitosan and polyvinyl pyrrolidone for clarithromycin release

The aim of this study was to develop a pH-sensitive chitosan/polyvinyl pyrrolidone (PVP) based controlled drug release system for clarithromycin. The hydrogels were synthesized by cross-linking chitosan and PVP blend with glutaraldehyde to form a semi-interpenetrating polymer network (semi-IPN). These semi-IPNs were studied for their content uniformity, swelling index (SI), mucoadhesion, wettability, in vitro release and their release kinetics. The hydrogels showed more than 97% content of clarithromycin. These hydrogels showed high swelling and mucoadhesion under acidic conditions. The swelling may be due to the protonation of a primary amino group on chitosan. In acidic condition, chitosan would be ionized, and adhesion could have occurred between the positively charged chitosan and the negatively charged mucus. In the alkaline condition, less swelling and mucoadhesion was noticed. In vitro release study revealed that formulation containing chitosan (2% w/v) and PVP (4% w/v) in the ratio of 21:4 showed complete drug release after 12 h. Release profile showed that all the formulations followed non-Fickian diffusion mechanism. The cross-linking and compatibility of clarithromycin in the formulation was studied by Fourier transform infrared (FTIR) spectroscopic analysis, differential scanning calorimetry (DSC) and powder X-ray diffraction (p-XRD) study, which confirmed proper formation of semi-IPN and stability of clarithromycin in the formulations. The surface morphology of semi-IPN was studied before and after dissolution in simulated gastric fluid (SGF, pH 1.2) which revealed pores formation in membrane after dissolution. The results of study suggest that semi-IPNs of chitosan/PVP are potent candidates for delivery of clarithromycin in acidic environment.     

聚丙烯酸钾／羧甲基纤维素钠半互穿网络水凝胶的两步水溶液合成及其药物释放

以N,N’-亚甲基双丙烯酰胺为交联剂、过硫酸铵和焦亚硫酸钠为氧化还原引发剂，采用新型两步水溶液聚合法制备了聚丙烯酸钾／羧甲基纤维素钠（PAA／CMC-Na）半互穿网络水凝胶．对其溶胀动力学、离子强度敏感性和pH敏感性进行了研究．探讨了PAA／CMC-Na半互穿网络水凝胶对荼碱的释放行为，实验结果表明所吸收的茶碱在盐溶液中90min内释放率可达90％，释放规律遵循Fiekian扩散机制。     

Studies on in vitro release of CPM from semi-interpenetrating polymer network (IPN) composed of chitosan and glutamic acid

Interpenetrating polymer network (IPN) beads consisting of chitosan-glutamic acid were prepared for in vitro study of controlled release of chlorpheniramine maleate (CPM). A viscous solution of chitosan-glutamic acid was prepared in 2% acetic acid solution, extruded as droplets through a syringe to alkalimethanol solution and the precipitated beads were crosslinked using glutaraldehyde solution. Swelling and drug release studies were carried out. Transport of release medium through the semi-IPN depended upon its pH and extent of crosslinking. The structural and morphological studies of beads were carried out by using a scanning electron microscope (SEM). The larger surface area of beads as well as their ease of handling makes them ideal agents of controlled release.     

三维网笼状聚N-羟甲基丙烯酰胺/聚乙二醇半互穿网络复合相变微球的制备及热性能

以N-羟甲基丙烯酰胺(N-MA)和聚乙二醇(PEG)共晶为原料,通过乳液聚合制得聚N-羟甲基丙烯酰胺(PN-MA)/PEG半互穿网络(SIPN)复合相变材料(CPCM).利用FTIR、XRD、差示扫描量热仪(DSC)、SEM、EDS等方法对PN-MA/PEG SIPN型CPCM的结构与性能进行了研究.结果 表明:所得P...     

pH dependent hydrolysis and drug release behavior of chitosan/poly(ethylene glycol) polymer network microspheres

Semi-interpenetrating polymer network (IPN) microspheres of chitosan and poly(ethylene glycol) PEG were prepared for controlled release of drugs. A new method for the chemical crosslinking of chitosan microspheres containing isoniazid (INH) as a model drug is proposed and evaluated. The method consists of the exposure of microspheres to the vapor of crosslinking agent that act in gaseous phase under mild conditions. The structural analysis of the microspheres was carried out by FTIR-analysis. The swelling behavior, hydrolytic degradation, structural changes of the microspheres and loading capacity (LC) of the microspheres for INH were investigated. The prepared microspheres have shown 93% drug loading capacity, which suggested that these semi-IPN microspheres are suitable for controlled release of drugs in an oral sustained delivery system. © 2001 Kluwer Academic Publishers     

Controlled release of imatinib mesylate from PLGA microspheres inhibit craniopharyngioma mediated angiogenesis

Poly(lactic-co-glycolic acid) microspheres loaded with imatinib mesylate has been developed as a new therapeutic strategy to prevent craniopharyngioma recurrence. Microspheres composed of different lactic/glycolic acid ratios, molecular weights and drug compositions were synthesized and loaded with imatinib mesylate by modified double-emulsion/solvent evaporation technique and subsequently characterized by particle-size distribution, scanning electron microscopy, encapsulation efficiency and in vitro drug release. Inhibitory potential of imatinib containing microspheres on tumor neovascularization was investigated on craniopharyngioma tumor samples by rat cornea angiogenesis assay. Results showed that microspheres in different LA:GA ratios [LA:GA 50:50 (G50), 75:25 (G25), 85:15 (G15)] considerably reduced neovascularization induced by recurrent tumor samples in an in vivo angiogenesis assay (P < 0.01). Our data indicate that local delivery of imatinib mesylate to the post-surgical tumoral cavity using biodegradable microspheres may be a promising biologically selective approach to prevent the recurrence of craniopharyngiomas, via inhibition of neovascularization.     

磁性壳聚糖-聚丙烯酸载药微球的释放性能研究

对合成的壳聚糖-聚丙烯酸及磁性壳聚糖-聚丙烯酸微球用扫描电镜进行形貌观察,并测定了磁性壳聚糖-聚丙烯酸微球的热稳定性.以牛血清白蛋白(BSA)为模拟蛋白药物,研究了载有BSA的磁性壳聚糖-聚丙烯酸微球的释放性能.结果表明,壳聚糖-聚丙烯酸共聚物外形呈片层状;而磁性壳聚糖-聚丙烯酸微球为致密微球,粒径约在100～400nm之间,具有较好的分散性,磁性壳聚糖-聚丙烯酸微球在温度区间(0～135℃)内具有良好的热稳定性.载有BSA的磁性微球在模拟肠液中刚开始时有一个突释过程,之后缓慢释放,在6h左右达到了平衡,最终释放率可达到80.5%;而在模拟胃液中几乎没有释放,平衡释放率只有5.8%.     

磁性壳聚糖-聚丙烯酸载药微球的释放性能研究

对合成的壳聚糖-聚丙烯酸及磁性壳聚糖-聚丙烯酸微球用扫描电镜进行形貌观察,并测定了磁性壳聚糖-聚丙烯酸微球的热稳定性。以牛血清白蛋白(BSA)为模拟蛋白药物,研究了载有BSA的磁性壳聚糖-聚丙烯酸微球的释放性能。结果表明,壳聚糖-聚丙烯酸共聚物外形呈片层状;而磁性壳聚糖-聚丙烯酸微球为致密微球,粒径约在100～400 nm之间,具有较好的分散性,磁性壳聚糖-聚丙烯酸微球在温度区间(0～135℃)内具有良好的热稳定性。载有BSA的磁性微球在模拟肠液中刚开始时有一个突释过程,之后缓慢释放,在6h左右达到了平衡,最终释放率可达到80．5%;而在模拟胃液中几乎没有释放,平衡释放率只有5．8%。     

Development of novel interpenetrating network gellan gum-poly(vinyl alcohol) hydrogel microspheres for the controlled release of carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.     

Controlled dual release of hydrophobic and hydrophilic drugs from electrospun poly(l-lactic acid) fiber mats loaded with chitosan microspheres

This work is to develop novel electrospun poly(l-lactic acid) (PLLA) fiber mats for controllable delivery of hydrophobic and hydrophilic drugs. For this aim, bovine serum albumin (BSA, used as a hydrophilic model drug) was firstly enveloped into chitosan microspheres by spray drying. Benzoin (used as a hydrophobic model drug) was directly dissolved in PLLA solution and then the chitosan microspheres were suspended into the PLLA solution, which was used to prepare PLLA fiber mats by electrospinning. Polyvinylpyrrolidone (PVP) was added into the PLLA solution to tune the drug release behaviors. The results showed that the chitosan microspheres were uniformly distributed in the fibers. BSA had a short-term release while benzoin had a long-term and sustained release in all the dual drug delivery systems, and the release of both hydrophobic and hydrophilic drugs could be adjusted by changing the ratio of PVP/PLLA.     

Poly(lactide-co-glycolide) encapsulated hydroxyapatite microspheres for sustained release of doxycycline

The purpose of this study was to prepare a poly(lactide-co-glycolide) (PLGA) encapsulated hydroxyapatite microspheres (HAP-MSs) as injectable depot for sustained delivery of Doxycycline (Doxy). Doxy loaded HAP-MSs (Doxy-HAP-MSs) were encapsulated with PLGA by solid-in-oil-in-water (S/O/W) emulsion-solvent evaporation technique, the effects of the PLGA used (various intrinsic viscosity and LA/GA ratio) and ratio of PLGA/HAP-MSs on the formation of Doxy-HAP-MSs and in vitro release of Doxy were studied. The results showed that sustained drug release without obvious burst was obtained by using PLGA encapsulated HAP-MSs as the carrier, also the drug release rate could be tailored by changing the ratio of PLGA/HAP-MSs, or PLGA of various intrinsic viscosities or LA/GA ratio. Lower ratio of PLGA/HAP-MSs corresponded faster Doxy release, e.g. for the microspheres of PLGA/HAP-MSs ratio of 8 and 0.25, the in vitro Doxy release percents at the end of 7days were about 23% and 76%, respectively. Higher hydrophilicity (higher ratio of GA to LA) and lower molecular weight of PLGA corresponded to higher Doxy release rates. For in vivo release study, PLGA encapsulated HAP-MSs were subcutaneously injected to the back of mice, and the results showed good correlation between the in vivo and in vitro drug release. Meanwhile, the plasma Doxy levels after subcutaneous administration of PLGA encapsulated Doxy-HAP-MSs were relatively lower and steady compared to that of the un-encapsulated microspheres. In conclusion, PLGA encapsulated HAP-MSs may be a potential vehicle for the sustained delivery of Doxy.     

Controlled release system for ametryn using polymer microspheres: preparation, characterization and release kinetics in water

The purpose of this work was to develop a modified release system for the herbicide ametryn by encapsulating the active substance in biodegradable polymer microparticles produced using the polymers poly(hydroxybutyrate) (PHB) or poly(hydroxybutyrate-valerate) (PHBV), in order to both improve the herbicidal action and reduce environmental toxicity. PHB or PHBV microparticles containing ametryn were prepared and the efficiencies of herbicide association and loading were evaluated, presenting similar values of approximately 40%. The microparticles were characterized by scanning electron microscopy (SEM), which showed that the average sizes of the PHB and PHBV microparticles were 5.92±0.74 μm and 5.63±0.68 μm, respectively. The ametryn release profile was modified when it was encapsulated in the microparticles, with slower and more sustained release compared to the release profile of pure ametryn. When ametryn was associated with the PHB and PHBV microparticles, the amount of herbicide released in the same period of time was significantly reduced, declining to 75% and 87%, respectively. For both types of microparticle (PHB and PHBV) the release of ametryn was by diffusion processes due to anomalous transport (governed by diffusion and relaxation of the polymer chains), which did not follow Fick's laws of diffusion. The results presented in this paper are promising, in view of the successful encapsulation of ametryn in PHB or PHBV polymer microparticles, and indications that this system may help reduce the impacts caused by the herbicide, making it an environmentally safer alternative.     

The release of 5-fluorouracil from microspheres of poly(epsilon-caprolactone-co-ethylene oxide)

The purpose of this study was to evaluate the in vitro release of 5-fluorouracil from microspheres prepared using a novel triblock copolymer of ε-caprolactone and ethylene oxide as the encapsulating material. Microspheres of poly(ε-caprolactone-co-ethylene oxide) were prepared by employing the “hot-melt” method of microencapsulation. Microspheres were sized using sieve analysis and scanning electron microscopy (SEM). Release studies were performed using a custom-made rotating paddle dissolution apparatus. Copolymer microspheres, fabricated by the hot melt method were shown by electron microscopy to have smooth, nonporous surfaces. Drug-loaded microspheres were found to have a broad distribution of sizes, which was thought to be a consequence of the wide range of crystal sizes of the encapsulated unmilled drug. Nonlinear release kinetics were observed from microspheres in the size fraction 75-250 μm, with a pronounced “burst release” associated with the presence of drug at the surface of the microspheres. A specific delineation of the drug release mechanism was not possible due to rapid gelation, swelling, and subsequent dissolution of the microspheres that occurred on hydration. This work describes the preparation of microspheres that swell rapidly and coalesce together on hydration, accompanied by rapid drug release and copolymer dissolution over a 2-hr period.     

光交联壳聚糖-(PVA-SbQ)共混膜的制备与性能表征

聚乙烯醇一苯乙烯基吡啶盐缩合物(PVA-SbQ)是一种新型光敏聚合物,在紫外光诱导下发生光二聚反应形成大分子网状结构.通过溶液共混法,在壳聚糖(CS)膜中引入具有光二聚特性的PVA-SbQ,成膜后在紫外灯辐照下进行光交联反应,制备了光交联壳聚糖-(PVA-SbQ)共混膜.用扫描电镜、X射线衍射、傅立叶红外等对膜的结构进行表征,并对膜的力学性能、吸湿率、透光率等性能进行研究.实验结果表明:光交联壳聚糖-(PVA-SbQ)共混膜的表面形态比较独特;CS与PVA-SbQ分子间存在一定的氢键相互作用;光交联后,共混膜形成网状结构,有效地改善了壳聚糖膜的力学性能、吸湿性和紫外屏蔽性能.     

Controlled release of salicylic acid from poly(D,L-Lactide)

Poly(D,L-Lactide) of high molecular weight (M_v was prepared by ring-opening bulk polymerization of D,L-Lactide and characterized in terms of M_v, melting point and swelling behavior in buffer solution. Samples of the polymers with low and high M_v (2000 and 22 000 respectively) loaded with various amounts of salicylic acid (SA) were immersed in a buffer solution and the release of SA was recorded. The results obtained showed that swelling of the poly(D,L-Lactide) samples obeyed Fick's law, especially for those with high molecular weight, where biodegradation proceeds slowly. The release of SA seemed to follow a simplified relationship which is linear with time, at least for the early stages of delivery. The extent of linearity is dependent on the content of the acidic SA, which probably accelerates decomposition of the high molecular weight products. © 2001 Kluwer Academic Publishers     

Preparation and characterization of molecularly imprinted poly(hydroxyethyl methacrylate) microspheres for sustained release of gatifloxacin

Molecularly imprinted poly(hydroxyethyl methacrylate) microspheres (PHEMA MIPMs) were prepared via precipitation polymerization in this article, using gatifloxacin (GFLX), hydroxyethyl methacrylate (HEMA), and ethylene glycol dimethacrylate (EGDMA) as template molecule, functional monomer and cross-linker, respectively. The effects of reaction medium, initial total monomers, cross-linker and molecular imprinting on the polymerization were investigated systematically. The interaction between GFLX and HEMA in pre-solution was studied by UV–Visible spectrophotometer, both size and morphology of products were characterized by a scanning electron microscope. When the total initial monomer concentration was 1 vol%, EGDMA content was 70 mol%, a group of uniform PHEMA MIPMs were prepared at different GFLX/MAA molar ratios, with diameter range from 2.06 ± 0.07 to 2.82 ± 0.20 μm. The results of drug loading and in vitro release experiments demonstrated that PHEMA MIPMs could achieve a higher GFLX loading content and a more acceptable sustained release than non-imprinted ones.     

Synthesis and mechanical properties of cardanol-formaldehyde (CF) resins and CF-poly(methylmethacrylate) semi-interpenetrating polymer networks

Cardanol-formaldehyde (CF) resins (both novolac and resol) and CF-poly(methylmethacrylate) (PMMA) semi-interpenetrating polymer networks were synthesized and their mechanical properties and thermal transitions were evaluated. The lower tensile strength of CF resins compared to phenol-formaldehyde (PF) resins may be understood on the basis of the structure of the C₁₅ side chain imparting steric hindrance and reduction in intermolecular interactions. Interpenetration of CF with PMMA increased the mechanical properties only marginally. Scanning electron micrographs of the semi-IPNs showed two distinct phases. Thermomechanical analysis gave two glass transition temperatures,T _g, for the IPNs, the lowerT _g corresponding to the PMMA phase and the higherT _g to the CF phase. However, the unusual increase inT _g of the CF from 128°C to 144°C suggests restrictions in the segmental motion of the CF phase brought about by mixing with another rigid polymer such as PMMA.     

Development and in vitro evaluation of surface modified poly(lactide-co-glycolide) nanoparticles with chitosan-4-thiobutylamidine

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.