共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
研究物理防老剂(微晶蜡A)和化学防老剂(防老剂RD,3100和4020)对轮胎胎侧胶耐臭氧老化性能和耐天候老化性能的影响。结果表明:与未添加防护体系的硫化胶相比,添加化学防老剂或微晶蜡A的硫化胶耐臭氧老化性能提高,微晶蜡A的防护效果较好;添加微晶蜡A的硫化胶耐天候老化性能大幅提高;添加化学防老剂和微晶蜡A的硫化胶耐臭氧老化性能和耐天候老化性能最佳;成品轮胎行驶50 000 km后,胎侧弹性良好,胎面和胎侧均没有裂纹产生,轮胎使用正常。 相似文献
3.
研究生胶体系和混炼工艺对斜交轮胎胎侧胶耐龟裂性能的影响.结果表明,采用EPDM替代BR用于轮胎胎侧胶中可大幅提高胎侧胶的耐龟裂和耐老化性能,胶料其余性能均满足要求,胎侧胶混炼工艺对胶料耐龟裂性能基本无影响. 相似文献
4.
5.
6.
探讨抗臭氧剂CTU在斜交轮胎胎侧胶中的应用.结果表明,加入抗臭氧剂CTU的胶料焦烧时间略有缩短,硫化胶耐臭氧老化性能显著改善,耐天候老化性能略有提高;胎侧胶采用抗臭氧剂CTU的6.50-16 10PR条形花纹轻载斜交轮胎装车后露天停放1个多月未出现胎侧裂口问题.在斜交轮胎胎侧胶胶料中,抗臭氧剂CTU可以与防老剂RD,4010NA或4020等并用,建议用量为1.5~2份. 相似文献
7.
8.
9.
10.
研究改性CN6炭黑在轮胎胎侧胶中的应用.结果表明,在轮胎胎侧胶中,改性CN6炭黑代替通用炭黑N660后,硫化胶拉伸性能基本不变,压缩生热明显降低,耐屈挠性能显著改善,成品耐久性能提高10%. 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
15.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
16.
18.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
19.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献