Visualizing “typical” and “exotic” Internet traffic data

The threat of cyber attacks motivates the need to monitor Internet traffic data for potentially abnormal behavior. Due to the enormous volumes of such data, statistical process monitoring tools, such as those traditionally used on data in the product manufacturing arena, are inadequate. “Exotic” data may indicate a potential attack; detecting such data requires a characterization of “typical” data. We devise some new graphical displays, including a “skyline plot,” that permit ready visual identification of unusual Internet traffic patterns in “streaming” data, and use appropriate statistical measures to help identify potential cyberattacks. These methods are illustrated on a moderate-sized data set (135,605 records) collected at George Mason University.     

Construction of a hermite rational “Wachspress type” finite element

This paper concerns the construction of a quadrilateral finite element whose interpolation space admits of rational fractions for basis functions of “Wachspress type” [1, 2]. The construction of this finite element, which is in a way the “rational” equivalent of the ADINI finite element[3, 4], is founded on a method analogous to the one used for Serendip degree-two finite element construction in[2]. The study of interpolation error is dealt with in a paper by Apprato, Arcangeli and Gout in this journal “Rational interpolation of Wachspress error estimates”.     

Non-linear mechanic and electric behavior of a robot axis with a “harmonic-drive” gear

This paper presents a study of a complete robot axis including the electrical and the mechanical parts. The motorization of the robot arm presented here has been carried out using a DC motor, a “harmonic-drive” type gear system and three control loops (current, speed and position). Each component is studied and modeled taking into account non-linearities such as current limitation, backlash, low rigidity and non-linear friction. The results obtained through computation of the model are compared with measurements on the real arm (motor current and speed) using speed and position loops.     

Undergraduate students' use of information elicited during e-mail “tutorials”

This study considers those questions posed by students during e-mail “tutorials” to elicit information from “guest lecturers” and the use of that information by students in their essays. The “tutorials” were conducted for students in the U.K. by a “guest lecturer” in France. The “guest lecturer” was accredited as a tutor on the module for which the students were enrolled, and participated in the module by the provision of lecture notes prior to the e-mail tutorials. Data for the study, drawn from a comparative education assignment set for undergraduate students enrolled on the module, comprised surveys of students' perceived IT capabilities and attitudes towards IT, analyses of students' questions and analyses of students' essays. The findings of the study indicate (1) that tutees tend to pose questions to elicit information or clarification rather than to elicit the viewpoint or opinions of the “guest lecturer” and (2) that two-thirds of tutees' essays cited information elicited from the “guest lecturer”.     

The formation of learners’ semiosphere by authentic inquiry with an integrated learning object “Young Scientist”

An integrated learning object, a web-based inquiry environment “Young Scientist” for basic school level is introduced by applying the semiosphere conception for explaining learning processes. The study focused on the development of students’ (n = 30) awareness of the affordances of learning objects (LO) during the 3 inquiry tasks, and their ability of dynamically reconstructing meanings in the inquiry subtasks through exploiting these LO affordances in “Young Scientist”. The problem-solving data recorded by the inquiry system and the awareness questionnaire served as the data-collection methods.It was demonstrated that learners obtain complete awareness of the LO affordances in an integrated learning environment only after several problem-solving tasks. It was assumed that the perceived task-related properties and functions of LOs depend on students’ interrelations with LOs in specific learning contexts. Learners’ overall awareness of certain LO affordances, available in the inquiry system “Young Scientist”, developed with three kinds of patterns, describing the hierarchical development of the semiosphere model for learners. The better understanding of the LO affordances, characteristic to the formation of the functioning semiosphere, was significantly related to the advanced knowledge construction during these inquiry subtasks that presumed translation of information from one semiotic system to another. The implications of the research are discussed in the frames of the development of new contextual gateways for learning with virtual objects. It is assumed that effective LO-based learning has to be organized through pedagogically constrained gateways by manifesting certain LO affordances in the context in order to build up the dynamic semiosphere model for learners.     

Erratum to “Axiomatisations of functional dependencies in the presence of records, lists, sets and multisets”

This note corrects two errors that occurred during the typesetting of our paper “Axiomatisations of functional dependencies in the presence of records, lists, sets and multisets”, which appeared in Hartmann et al. [Axiomatisations of functional dependencies in the presence of records, lists, sets and multisets, Theoret. Comput. Sci. 353(2) (2006) 167–196].     

Information retrieval expert system “matchmaker”

This paper describes the information system used to search for a potential matrimonial partner. The search is based on comparison of the subject's record, which consists of his/her answers to about 400 items of a specially designed questionnaire, to the records of the potential partners. The basic principle of the system is representation of the set of candidates for the client with psychological warnings about potential “conflict zones” in relationships between client and candidate rather than a ranking of candidates based on hypothetical “psychological compatibility” indices.     

Application of backward chaining, “fuzzy logic,” and the management of information to procurement of facility systems/services

This paper introduces the research work of the Performance Based Studies Research Group (PBSRG), the Alliance of Construction Excellence (ACE), and the Del E. Webb School of Construction (DEWSC) to apply a new evaluation/delivery mechanism for construction systems to increase performance of the construction systems. The research is based on “fuzzy thinking” and the management of information. Concepts utilized include “backward chaining” solution methodology, and a relative distancing model to procure the best available facility systems. Participants in the program include general contractors, Job Order Contractors, mechanical contractors, roofing contractors, material suppliers and manufacturers, and facility owners and managers from Motorola, Honeywell, Morrison Knudson, IBM, and from other major facilities in the Phoenix metropolitan area.     

“Electric” Zip Tips™, Preliminary Results

Induction based fluidics (IBF), a new, simple patented approach for transporting liquids in the micro and the macro world, is discussed. Electric fields are shown to energize liquid/s in a container/s to execute an array of purposes. IBF is shown uniquely to energize N liquids in simple off the shelf devices, inductively. We discuss calibration and other issues, as we demonstrate how simple devices can dispense nanoliters and microliters with high precision and accuracy. Furthermore, we show preliminary single and eight channel data for the Zip Tip™ made by Millipore where the device transports liquids “electrically.” We briefly consider how such new devices, “electric” Zip Tips™, might automate desalting and the placement of digests for MALDI TOF analysis.     

Comments on “The Extreme Learning Machine”

This comment letter points out that the essence of the “extreme learning machine (ELM)” recently appeared has been proposed earlier by Broomhead and Lowe and Pao , and discussed by other authors. Hence, it is not necessary to introduce a new name “ELM.”      

Suppression of “salt and pepper” noise based on Youden designs

This paper presents a new class of algorithms based on Youden designs to detect and restore edges present in an image imbedded by mixture or “salt and pepper” noise. The mixture noise consists of a uncorrelated or correlated noisy background plus uncorrelated impulsive noise. The objective is to restore pixels affected by the impulsive part of the mixture noise. The approach is to consider that these pixels have lost their true value and their estimate is obtained via the normal equation that yields the least sum of square error (LSSE). This procedure is known in the literature as “The Missing Value Approach Problem”. The estimates are introduced into the image data and an ANOVA technique based on Youden design is carried out. We introduce Youden designs which are special Symmetric Balanced Incomplete block (SBIB) designs, the pertinent statistical tests and estimates of the factor effects. We derive the estimate of the missing value for the uncorrelated noise environment as well as for the correlated one. The high level of performance of these algorithms can be evaluated visually via the input/output images and objectively via the input/output signal-to-noise ratio (SNR).     

Interpolation error estimates on hermite rational “Wachspress type” third degree finite element

This paper is about the study of interpolation error for the Hermite rational “Wachspress type” third degree finite element that is constructed in[1]. We obtain results analogous with those of the “corresponding” ADINI (polynomial) finite element.     

Tactile sensors based on conductive polymers

This paper presents results from a selection of tactile sensors that have been designed and fabricated. These sensors are based on a common approach that consists in placing a sheet of piezoresistive material on the top of a set of electrodes. We use a thin film of conductive polymer as the piezoresistive material. Specifically, a conductive water-based ink of this polymer is deposited by spin-coating on a flexible plastic sheet, giving it a smooth, homogeneous and conducting thin film. The main interest in this procedure is that it is cheap and it allows the fabrication of flexible and low cost tactile sensors. In this work, we present results from sensors made using two technologies. Firstly, we have used a flexible printed circuit board (PCB) technology to fabricate the set of electrodes and addressing tracks. The result is a simple, flexible tactile sensor. In addition to these sensors on PCB, we have proposed, designed and fabricated sensors with screen-printing technology. In this case, the set of electrodes and addressing tracks are made by printing an ink based on silver nanoparticles. The exhaustive characterization provides us insights into the design of these tactile sensors.     

Recognizing image “style” and activities in video using local features and naive Bayes

The goal of this paper is to offer a framework for classification of images and video according to their “type”, or “style”––a problem which is hard to define, but easy to illustrate; for example, identifying an artist by the style of his/her painting, or determining the activity in a video sequence. The paper offers a simple classification paradigm based on local properties of spatial or spatio-temporal blocks. The learning and classification are based on the naive Bayes classifier. A few experimental results are presented.     

The identification of nonlinear models for process control using tailored “plant-friendly” input sequences

This paper considers certain practical aspects of the identification of nonlinear empirical models for chemical process dynamics. The primary focus is the identification of second-order Volterra models using input sequences that offer the following three advantages: (1) they are “plant friendly;” (2) they simplify the required computations; (3) they can emphasize certain model parameters over others. To provide a quantitative basis for discussing the first of these advantages, this paper defines a friendliness index f that relates to the number of changes that occur in the sequence. For convenience, this paper also considers an additional nonlinear model structure: the Volterra–Laguerre model. To illustrate the practical utility of the input sequences considered here, second-order Volterra and Volterra–Laguerre models are developed that approximate the dynamics of a first-principles model of methyl methacrylate polymerization.     

“Paraprogramming” manufacturing information systems

Computer integrated manufacturing (CIM) is creating unexpected problems for a growing number of manufacturing companies. Manufacturers are finding it especially difficult to attract programmers who are both willing and able to develop the highly complex software that integrates existing accounting, sales, production, engineering, and quality control information subsystems. Consequently, many companies abdicate their responsibility for manufacturing information systems and seek third party support ranging from consulting assistance to a total takeover of the company's information resources and operations. Companies that “give away” their internal information system capabilities to third parties will ultimately lose control of their enterprise information, a danger to be avoided. Off-the-shelf software for desktop computers has become sufficiently powerful to help solve a major portion of this serious problem. We hypothesize that manufacturing engineers (and others) can be trained to use packaged software to leverage their company's systems programming capabilities. In effect they would become “paraprogrammers” who would help design, develop, and maintain manufacturing information systems. This new type of professional would not require a computer science or similar educational background, but could be trained to satisfy many specialized programming needs in a manner similar to how paramedics and paralegals are trained and used in the medical and legal professions, respectively. This paper reports on the early stages of research to determine whether or not product design engineers can use a desktop relational database management system and its various command languages to develop a master bill of material information system (BOMIS). The purpose of the research is to evaluate the amount of programming complexity reduction and increased operational effectiveness that can be achieved through paraprogramming by manufacturing engineers.     

Alias types for “environment-aware” computations

In previous work with Bono we introduced a calculus for modelling “environment-aware” computations, that is computations that adapt their behavior according to the capabilities of the environment. The calculus is an imperative, object-based language (with extensible objects and primitives for discriminating the presence or absence of attributes of objects) equipped with a small-step operational semantics.In this paper we define a type and effect system for the calculus. The typing judgements specify, via constraints, the shape of environments which guarantees the correct execution of expressions and the typing rules track the effect of expression evaluation on the environment. The type and effect system is sound w.r.t. the operational semantics of the language.     

Generation of micropatterns of conducting polymers and aluminum using an intermediate-layer lithography approach and some applications

Conducting polymers, because of their promising potential to replace silicon and metals in building devices, have attracted great attention since the discovery of high conductivity in doped polyacetylene in 1977. Lithographic techniques present significant technical challenges when working with conducting polymers. Sensitivity of conducting polymers to environmental conditions (e.g., air, oxygen, moisture, high temperature, and chemical solutions) makes current photolithographic methods unsuitable for patterning the conducting polymers due to the involvement of wet and/or dry etching processes in those methods. Existing non-photolithographic approaches have limitations in throughput, resolution, or electrical insulation. Therefore, an intermediate-layer lithography (ILL) approach has been recently developed by my group to produce conducting polymer micro/nanostructures. In the ILL method, an intermediate layer of an electrically insulating polymer is coated between the substrate and a layer of the conducting polymer to be printed. Subsequently, the conducting polymer is printed through mold insertion using a hot-embossing process. The current hot-embossing based methods face the obstacles of residual layer and depth of field (i.e., the height variation in the mold structures). In contrast, the ILL approach does not leave a residual layer in the material of interest, making conducting polymer patterns isolated from one another and avoiding the shorting problem in the electrical applications of these patterns. Furthermore, in the ILL, the height variation potentially existing among the mold structures has been transferred to the intermediate layer, ensuring that all patterns in the mold have been properly transferred to the conducting polymer layer. In addition to conducting polymers, the ILL can also be applied to pattern metals as well as other types of polymers. This paper gives a review of this ILL method and reports the results that we have achieved to date, including generation and applications of single and multiple layers of microstructures of conducting polymers and aluminum.     

A nexus of Cyber-Geography and Cyber-Psychology: Topos/“Notopia” and identity in hacking

This paper explores the Cyber-Psychological and Cyber-Geographic aspects of hacking and hacktivism. An examination of the literature related to hackers and hacking reveals a complex nexus of spatial (including cyber-spatial such as “Notopia”) and psychological aspects of hacking, from which emerges a central question of how humans perceive and manipulate their cyber-identities. Concealing (real and cyber) identities is typical in hacking. With our progressive acculturation with identity-less and place-less modes of existence, our cyber-identities through time may be studied from within John Locke’s criterion of “memory” and the spatial-geographical criterion of identity.