Mechanical behavior of masonry assemblages manufactured with recycled-aggregate mortars

Mortars containing recycled aggregate, instead of quartz sand, were characterized to find an alternative application for the fine recycled-aggregate fraction coming from building debris processing. Tests on bond strength of mortar to masonry units were carried out, as well as tests on compressive and shear strengths of masonry assemblages. The results obtained were related to the mechanical properties of mortars and brick. On the basis of the characterization results and performance evaluations, recycled-aggregate mortar appears to be superior to ordinary mortars in terms of mortar–brick bond strength and shear strength of masonry assemblages. This improved performance is of particular interest for the masonry structures in zones of seismic activity. In addition, the use of fine recycled aggregate is in accordance with the sustainable development concept, where recycling of building rubble plays a key role in ending the building life cycle.     

再生混凝土力学性能的研究进展

再生混凝土的应用,不仅能够解决废弃混凝土处理问题;又能降低因资源过度开采所引起的生态环境破坏,因而具有广阔的发展前景。相比于普通混凝土,再生混凝土的抗压强度、弹性模量以及抗疲劳性能较低,主要与再生骨料多方面因素的影响有关。对近年来再生混凝土力学性能相关研究进展进行了综述,再生骨料总吸水率是降低抗压强度的主要原因,疲劳性能则主要与再生骨料取代率和附着砂浆含量有关。在再生混凝土中掺加矿物掺合料能够改善新、旧双界面从而提高抗压强度和劈裂抗拉强度,掌握多个因素的影响和作用对再生骨料和再生混凝土进一步研究和应用具有重要意义。     

Environmentally-friendly mortars: a way to improve bond between mortar and brick

In order to find new application fields for either fine materials coming from building demolition or industrial byproducts, some mortars, in which fine recycled materials, obtained from a plant where rubble from building demolition are ground, are substituted to natural sand, were tested.Moreover, mortars containing either fly ash or ground brick powder as partial cement replacement were studied.Based on characterization results and performance evaluations, recycled-aggregate mortar seems to be superior in terms of mortar-brick bond strength, mainly because of its rheological properties.In addition, the use of fine recycled aggregate instead of natural sand is in accordance with the sustainable development concept, with recycling and reuse of building rubble playing a key role in meeting the need to complete the building life cycle.     

Effect of fly ash and slag on concrete: Properties and emission analyses

Recycled concrete is a material with the potential to create a sustainable construction industry. However, recycled concrete presents heterogeneous properties, thereby reducing its applications for some structural purposes and enhancing its application in pavements. This paper provides an insight into a solution in the deformation control for recycled concrete by adding supplementary cementitious materials fly ash and blast furnace slag. Results of this study indicated that the 50% fly ash replacement of Portland cement increased the rupture modulus of the recycled concrete. Conversely, a mixture with over 50% cement replacement by either fly ash or slag or a combination of both exhibited detrimental effect on the compressive strength, rupture modulus, and drying shrinkage. The combined analysis of environmental impacts and mechanical properties of recycled concrete demonstrated the possibility of optimizing the selection of recycled concrete because the best scenario in this study was obtained with the concrete mixture M8 (50% of fly ash+ 100% recycled coarse aggregate).     

再生粗骨料硅烷浸渍处理对混凝土介质传输性能的影响

由于残余砂浆的存在,再生粗骨料的物理力学指标远不及天然骨料,致使再生混凝土力学和耐久性能较差;此外,水分及有害离子侵入混凝土内部是引起混凝土材料性能劣化的主要原因。本试验用质量分数为8wt%的硅烷乳液浸渍强化再生粗骨料,通过抗压强度、毛细吸水和抗氯离子侵蚀试验对硅烷浸渍前后不同骨料质量取代率(0%、30%、50%)的再生混凝土介质传输性能进行了研究,最后利用SEM对再生混凝土内部的微观结构进行分析。试验结果表明,硅烷浸渍处理再生粗骨料的吸水率显著降低,由其制备的混凝土强度稍有所下降;再生混凝土毛细累积吸水量明显减少,且抗氯盐侵蚀性能显著提高,其中骨料质量取代率为50%的再生混凝土浸渍处理后氯离子扩散系数降低了37.5%。研究表明,硅烷浸渍处理再生粗骨料是提高再生混凝土耐久性的有效途径。      

多因素对再生混凝土力学性能及抗冻性的影响

为研究不同因素、不同水平对再生混凝土力学性能的作用。该文通过正交试验研究钢纤维掺量、再生粗骨料掺量和粉煤灰掺量对再生混凝土力学性能(抗压强度、劈裂抗拉强度和抗折强度)的影响,确定各因素对再生混凝土力学性能的影响程度,并加以量化表征,并提出多因素共同作用下再生混凝土力学性能的多元非线性回归模型且进行验证。在此基础上,该文进一步研究再生混凝土的抗冻性。结果表明:再生混凝土的力学性能随钢纤维掺量的增加而提高;随粉煤灰掺量增加而降低;再生粗骨料掺量对再生混凝土的力学性能影响较小。钢纤维的掺入可提高再生粗骨料的掺量。再生混凝土力学性能的实测值与通过建立的回归模型得到的计算值的最大误差在6.5%以内。此外,钢纤维的掺入和减少再生粗骨料的掺量均可以提高再生混凝土的抗冻性。     

Properties of architectural mortar prepared with recycled glass with different particle sizes

The recycling of glass waste as a source of aggregate for the production of concrete products has attracted increasing interest from the construction industry. However, the use of recycled glass in architectural mortar is still limited. This study attempts to develop a self-compacting based architectural mortar using white cement and 100% recycled blue glass as key ingredients. To improve the aesthetic qualities, a certain minimum quantity of glass cullets of larger particle size must be present. The influence of particle size of the recycled glass on the engineering properties of fresh and hardened architectural mortar is investigated. The experimental results demonstrate that it is feasible to utilize 100% recycled glass as the aggregate for the production of self-compacting based architectural mortar. These products have an average compressive strength of 40 MPa and flexural strength of 6 MPa at 28 days which are appropriate for some architectural and building applications. Also, the overall performances of all the architectural mortars prepared with different particle sizes of glass aggregates are comparable to those of control mortar mix prepared with river sand.     

再生橡胶颗粒对自流平砂浆力学性能影响的试验研究

分别研究了再生橡胶颗粒掺量、颗粒粒径及乳化沥青复合对自流平砂浆力学强度、折压比等力学性能参数的影响规律;提出了再生橡胶颗粒在水泥基材料体系中的三大作用效应,并分析了相应的影响机理。结果表明,再生橡胶颗粒掺量、颗粒粒径对自流平砂浆的抗折强度、抗压强度以及折压比存在较为显著的影响,当橡胶颗粒等量取代骨料体积15%时,体系的折压比达到最大,且橡胶颗粒与乳化沥青复掺后可进一步显著提高试件的折压比;与普通振捣密实成型砂浆体系相比,橡胶颗粒对自流平砂浆力学强度的影响未有明显的不同。     

Micromechanical investigation on size effect of tensile strength for recycled aggregate concrete using BFEM

In this paper, the validity and performance of base force element method (BFEM) based on potential energy principle was studied by some numerical examples. And the BFEM on damage mechanics is used to analyze the size effect on tensile strength for recycled aggregate concrete (RAC) at meso-level. The recycled aggregate concrete is taken as five-phase composites consisting of natural coarse aggregate, new mortar, new interfacial transition zone (ITZ), old mortar and old ITZ on meso-level. The random aggregate model is used to simulate the meso-structure of recycled aggregate concrete. The size effects of mechanical properties of RAC under uniaxial tensile loading are simulated using the BFEM on damage mechanics. The simulation results agree with the test results. This analysis method is the new way for investigating fracture mechanism and numerical simulation of mechanical properties for RAC.     

Investigation on micronized biomass silica as a sustainable material

Micronized biomass silica (MBS) is an agricultural waste obtained from controlled burning of rice husk and grind in jar mill. This paper investigates the optimum percentage of MBS for the replacement of cement by conducting several experiments with the blended cement paste and mortar with MBS percentages varying from 0, 4, 8 and 12. In addition, hydration products were also investigated in the blended cement paste through X-ray diffraction. Due to the pozzolanic reaction of MBS with cement hydrates, secondary calcium silicate hydrates (CSH) were formed and also MBS which has a potential to reduce the intensity of Ca(OH)₂ exhibited improved properties. The experimental results showed that the optimum percentage of MBS for the replacement of cement was 8% for the materials used in this study. The mechanical and durability properties of recycled aggregate concrete by replacing cement with 8% MBS were also carried out and it was found that the concrete exhibited improved properties. There by, using MBS one can overcome the drawbacks of recycled aggregate concrete as it acts as a supplementary cementitious material. Thus, by combining recycled concrete aggregate with MBS will achieve sustainable development.     

On the classification of mixed construction and demolition waste aggregate by porosity and its impact on the mechanical performance of concrete

The properties of recycled aggregate produced from mixed (masonry and concrete) construction and demolition (C&D) waste are highly variable, and this restricts the use of such aggregate in structural concrete production. The development of classification techniques capable of reducing this variability is instrumental for quality control purposes and the production of high quality C&D aggregate. This paper investigates how the classification of C&D mixed coarse aggregate according to porosity influences the mechanical performance of concrete. Concretes using a variety of C&D aggregate porosity classes and different water/cement ratios were produced and the mechanical properties measured. For concretes produced with constant volume fractions of water, cement, natural sand and coarse aggregate from recycled mixed C&D waste, the compressive strength and Young modulus are direct exponential functions of the aggregate porosity. Sink and float technique is a simple laboratory density separation tool that facilitates the separation of cement particles with lower porosity, a difficult task when done only by visual sorting. For this experiment, separation using a 2.2 kg/dm3 suspension produced recycled aggregate (porosity less than 17%) which yielded good performance in concrete production. Industrial gravity separators may lead to the production of high quality recycled aggregate from mixed C&D waste for structural concrete applications.     

Application of a weighted Grey-Taguchi method for optimizing recycled aggregate concrete mixtures

Assessment of the optimal mixture is an important issue to obtain desired quality. This paper integrates grey relational analysis and an objective weighting technique into the Taguchi method to propose the weighted Grey-Taguchi method. This method can be employed to assess the optimal mixture with multiple responses. In the application of this method, water/cement ratio, volume ratio of recycled coarse aggregate, replacement by river sand, content of crushed brick, and cleanliness of aggregate are selected as control factors with responses of slump, slump-flow, resistivity (7-day, 14-day, 28-day), ultrasonic pulse velocity (7-day, 14-day, 28-day), and compressive strength (7-day, 14-day, 28-day) to assess the optimal mixture of recycled aggregate concrete. Results demonstrate and verify that the optimal mixture has a water/cement ratio of 0.5, a volume fraction of recycled coarse aggregate of 42.0%, 100% replacement of river sand, 0% crushed brick, and water-washed aggregates.     

废水泥浆对水泥胶砂性能的影响研究

研究了废水泥浆澄清液、浆体以及干燥后的粉体对水泥胶砂流动度以及抗压强度的影响,为废水泥浆在预拌混凝土生产中的的回收利用提供技术基础,解决废水泥浆的环境污染和资源化利用问题。     

Influence of field recycled coarse aggregate on properties of concrete

This paper investigates the influence of different amounts of recycled coarse aggregates obtained from a demolished RCC culvert 15 years old on the properties of recycled aggregate concrete (RAC). A new term called “coarse aggregate replacement ratio (CRR)” is introduced and is defined as the ratio of weight of recycled coarse aggregate to the total weight of coarse aggregate in a concrete mix. To analyze the behaviour of concrete in both the fresh and hardened state, a coarse aggregate replacement ratio of 0, 0.25, 0.50 and 1.0 are adopted in the concrete mixes. The properties namely compressive and indirect tensile strengths, modulus of elasticity, water absorption, volume of voids, density of hardened concrete and depth of chloride penetration are studied. From the experimental results it is observed that the concrete cured in air after 7 days of wet curing shows better strength than concrete cured completely under water for 28 days for all coarse aggregate replacement ratios. The volume of voids and water absorption of recycled aggregate concrete are 2.61 and 1.82% higher than those of normal concrete due to the high absorption capacity of old mortar adhered to recycled aggregates. The relationships among compressive strength, tensile strengths and modulus of elasticity are developed and verified with the models reported in the literature for both normal and recycled aggregate concrete. In addition, the non-destructive testing parameters such as rebound number and UPV (Ultrasonic pulse velocity) are reported. The study demonstrates the potential use of field recycled coarse aggregates (RCA) in concrete.     

混杂纤维增强再生砖骨料混凝土增强机制与抗压性能计算方法

通过钢-聚烯烃混杂纤维增强再生砖骨料混凝土（HF/RBAC）的抗压与弹性模量试验,研究了再生砖骨料（RBA）取代率、混杂纤维掺量、纤维种类对混凝土抗压强度和弹性模量的影响。根据RBA的XRD图谱、X-CT图像、RBA火山灰活性成分与水泥水化产物反应原理及能量平衡原理,分析了HF/RBAC的破坏机制和纤维增强机制。研究表明,当RBA全取代天然骨料（NA）时,HF/RBAC立方体抗压强度、轴心抗压强度和弹性模量分别降低了36.72%、24.95%和43.53%。当钢-聚烯烃混杂纤维体积掺量为1.5%时,HF/RBAC立方体抗压强度、轴心抗压强度和弹性模量分别增加了20.51%、30.33%和35.84%。最后,提出了考虑RBA压碎指标和取代率、纤维种类和掺量等因素影响的HF/RBAC抗压强度和弹性模量的计算方法。     

再生混凝土动态直接拉伸的试验研究

利用大直径(75 mm)分离式霍普金森拉杆(SHTB),对再生粗骨料取代率分别为0%、25%、50%、75%和100%的5组圆柱体再生混凝土试样进行应变率范围为100~102s-1的动态直接拉伸实验,研究再生混凝土的动态直接拉伸力学性能及其破坏形态。试验结果表明,再生混凝土的抗拉强度随平均应变率的增加而增大,而再生混凝土的破坏形态与平均应变率有关,这表明再生混凝土具有明显的率敏感性。在相同水灰比下,再生混凝土准静态拉伸强度比普通混凝土低1.3%~15.9%,动态拉伸强度比普通混凝土低1.7%~29%,此研究为再生混凝土的工程应用提供一定的理论依据。     

Effect of carbonation of modeled recycled coarse aggregate on the mechanical properties of modeled recycled aggregate concrete

The modeled recycled aggregate concrete (MRAC) which is an idealized model for the real recycled aggregate concrete (RAC) was used in this study. The MRCAs prepared with two types of old mortars were modified by an accelerated carbonation process. The effects of carbonation of MRCA on the micro-hardness of MRCA and the mechanical properties of MRAC were investigated. The results indicated that the micro-hardness of the old interfacial transition zone (ITZ) and the old mortar in the carbonated MRCAs was higher than that in the uncarbonated MRCAs, and the enhancement of the old ITZ was more significant than that of the old mortar. The compressive strength and modulus of MRACs increased when the carbonated MRCAs were utilized, and the improvement was more significant for MRAC prepared with a higher w/c. In addition, a numerical study was carried out and it showed that the improvement in strength by carbonation treatment was less obvious when the difference between the new and old mortar was larger.     

废卉混凝土再利用的研究进展

从节省能源和环境保护角度评述了利用废弃混凝土生产再生骨料混凝土的研究进展,并介绍了其在水泥和免烧等生产中再利用的最新研究动态。     

Enhancement of recycled aggregate properties by accelerated CO2 curing coupled with limewater soaking process

Strengthening the attached old cement mortar of recycled concrete aggregate (RCA) is a common approach to enhance the RCA properties. Accelerated CO₂ curing has been regarded as an alternative way to enhance the properties of RA. However, the improvement of the properties of RCA was limited by the shortage of reactive components in the old cement mortar available for the carbonation reactions. In this study, a CO₂ curing process associated with a limewater saturation method was performed cyclically on cement mortar samples, aiming to enhance the properties of cement mortars via artificially introducing additional calcium into the pores of the cement mortars. The results indicated that the adopted treatment method promoted the level of carbonation which was demonstrated by higher CO₂ uptake by the limewater saturated cement mortar when compared to that without limewater treatment. After 3-cycles of limewater-CO₂ treatment, the density of the cement mortar slightly increased by 5.7%, while the water absorption decreased by over a half. For mechanical properties, the compressive and flexural strength were increased by 22.8% and 42.4%, respectively. Compared to the untreated cement mortar samples, the total porosity of cement mortar was reduced by approximately 33% and the densified microstructure therefore resulted in a higher microhardness.     

Influence of fly ash as a cement addition on the hardened properties of recycled aggregate concrete

The effects of the use of Class F fly ash as a cement addition on the hardened properties of recycled aggregate concrete were determined. In this study, four series of concrete mixtures were prepared with water-to-cement (w/c) ratios of 0.55, 0.50, 0.45 and 0.40. The recycled aggregate was used as 0%, 20%, 50% and 100% replacements of coarse natural aggregate. Furthermore, fly ash was employed as 0% and 25% addition of cement. Although the use of recycled aggregate had a negative effect on the mechanical properties of concrete, it was found that the addition of fly ash was able to mitigate this detrimental effect. Also, the addition of fly ash reduced the drying shrinkage and enhanced the resistance to chloride ion penetration of concrete prepared with recycled aggregate. Moreover, it was found that the drying shrinkage and chloride ion penetration decreased as the compressive strength increased. Compared with the results of our previous study, the present study has quantified the advantages of using fly ash as an additional cementitious material in recycled aggregate concrete over the use of fly use as a replacement of cement.