共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
本文介绍基于ADSP-BF561的车辆辅助驾驶系统硬件设计,根据系统设计要求,搭建最小系统和扩展电路,并实现通过CCD摄像机进行实时视频采集.经过视觉处理算法后,将计算结果发送至CAN总线上,辅助驾驶策略控制单元最终根据危险程度的大小提示驾驶员或控制车辆的油门和制动.其硬件设计包括最小系统电路、并行输入/输出外围接口外围电路、CAN模块电路等,为搭建整个车辆辅助驾驶系统提供可靠的硬件基础和系统框架基础. 相似文献
5.
毕桂熏 《数码设计:surface》2021,10(1):2-3
本文简要介绍了医院信息管理系统中融合应用计算信息化的设计思路:以患者信息管理为设计主体、强化信息管理系统的应用智能性;分别从系统、功能、数据库三个视角,探索了医院信息管理系统中融合应用计算信息化的具体设计应用,以此提升医院信息管理系统运行的智能性. 相似文献
6.
论文介绍了高校学生信息管理系统的开发过程,主要的任务包括:1.通过对学生信息管理系统做需求分析,确定了系统的设计目标以及系统的需求。2.完成了系统的设计与实现。经过系统分析、设计、实现,系统能够良好地完成学生信息管理工作。 相似文献
7.
线控技术引入到汽车工业后被认为可以有效地提高车辆安全性.性能和燃料效率,同时又可以减少设计和制造费用.介绍了基于 SAE J1939总线的线控节气门控制系统的设计与实现方法,阐明了系统的体系结构、工作原理、节气门控制器模块的硬件与软件设计方法,设计并实现了"可调驾驶性能","酒后驾驶监控与报警"等线控油门扩展功能,SAE J1939协议为本系统未来与车辆其它系统的功能集成提供了通信接口.样机测试结果表明,系统能够在所设计的多种功能模式下可靠地工作,具有良好的应用前景. 相似文献
8.
钻井企业物料库存量大、种类多、价值高,使得钻井物料管理难度大、成本高。钻井ERP物料基础信息管理系统对钻井过程中物料数据特性及物料关系进行了研究,采用ERP物料基础信息的管理思想和面向对象设计的方法,基于.NET技术与C#技术,设计实现了一个钻井ERP物料基础信息管理系统.并给出了系统的面向对象分析设计模型和系统组成模块。钻井ERP物料基础信息管理系统的应用,能对钻井物料进行有效地管理,并为钻井ERP系统的实施奠定了基础。 相似文献
9.
魏广科 《计算机工程与设计》2007,28(11):2682-2685,2698
在对.NET关键技术分析的基础上,针对企业的人事管理的现状,分析和设计了一套实用的人力资源信息管理系统.首先通过对企业人力资源信息管理的现状和需求的分析,提出了搭建系统的合理架构模式:三层架构模式,以B/S方式来构建人力资源信息管理系统.用面向对象和组件化开发相结合的设计方法,借助Rose工具,用UML语言,进行可视化建模,从系统需求、系统设计、系统实现3个方面,对人力资源信息管理系统进行了具体的分析与设计. 相似文献
10.
11.
12.
结合指纹识别与IC卡技术,以SPCE061A单片机为控制核心,实现驾驶培训管理系统车载设备的设计方案.系统采用光学指纹识别模块FDA01采集学员指纹,通过比对IC卡内存储的学员报名时的指纹验证身份:利用IC卡实现对学员整个培训过程中静态信息和动态信息的记录存储.设计为保证信息化驾驶培训管理的真实性和准确性提供有效的车载设备解决方案. 相似文献
13.
本文主要论述了嵌入式教学模式中案例式项目驱动教学的特点,并对项目任务驱动机制做了更新的阐释,肯定了国际先进的LTM教学法的科学性和合理性,最后从学校、企业、学生、社会各方面需求出发总结了嵌入式教学模式环节中订单培养的益处。 相似文献
14.
《Computer Standards & Interfaces》2002,24(2):101-110
The paper presents new results concerning the formalisation and optimisation of the intelligent monitoring systems (IMS) design. The attention is focused on the conceptual and mathematical frameworks of the approach based on the optimal synthesis theory adapted to the specifics of IMS functioning. Being carried out, optimal synthesis creates a possibility for the following (sub-) optimal decomposition of the initial design task into the set of smaller mutually connected tasks. These tasks determine the requirement specifications for a direct, most efficient (optimal) engineering design of the IMS main components. Relations between the statistical synthesis and optimal decomposition of IMS projects are analysed. The engineering definition of the system's intelligence enabling its formalisation and comparison is given. Apart from the analytical support of the design, the proposed approach can be used for the improvement of the existing software employed in the IMS computer design, virtual modelling and verification. 相似文献
15.
Jennifer G. Tichon 《Cognition, Technology & Work》2007,9(4):177-187
The current study was undertaken to inform the development of simulations for improving train driver’s decision making under
degraded track conditions. Trains are sophisticated heavy machinery and their performance is ever increasing resulting in
the driving task becoming more complex and progressively dominated by cognitive and perceptual skills. A critical part of
reducing the potential for train driver error and of increasing performance lies in the appropriate design of simulation training.
In the current study a cognitive task analysis, using the critical decision method (CDM) was undertaken using a focus group
research design. The process resulted in increased knowledge of expert train driver decision-making processes. Across four
major incidents analyzed 11 decision points, 17 cues, 30 essential responsive actions and 45 possible errors where identified.
The use of these results for supporting the design of simulation training and associated performance measures is discussed. 相似文献
16.
全球化制造中分布式网络化模式正逐渐成为一种趋势。为解决异构化企业协同智能制造的问题,提出一种基于IMS的企业资源协同模型,根据企业资源的聚集性构造具有特征路径短、聚类度大的小世界网络,将企业制造单元或生产工序构建成小世界网络。在此基础上,研究针对此网络特性进行企业联盟路径的生成算法。实际应用中在订单属性驱动和多节点Agent代理下,构建基于IMS的协同模型,为解决企业联盟机制和多任务企业资源路径问题,采用改进蚁群算法和在小世界网络下进行问题求解。通过仿真实验结果表明该模型和方法的有效性和正确性。 相似文献
17.
18.
19.
库存管理系统中数据库的设计与实现 总被引:8,自引:1,他引:7
在数据库应用系统的设计中,一个好的数据库结构是应用系统的基础。以库存管理系统的数据库设计为实例,讨论了数据库设计的方法和技术,实体的属性就是关系的属性,实体的码就是关系的码。与该联系相连的各实体的码以及联系本身的属性转换为关系属性,各实体的码组成关系的码或关系码的一部分。详细介绍了库存管理系统中数据库设计的全过程。 相似文献
20.
Hirohide Hinomoto 《International journal of parallel programming》1976,5(3):277-302
The organization in this study used all versions of IMS, from IMS 1 through IMS VS 1.01, over the period 1970–1975. During this period, the number of messages processed steadily increased from 6000 in October 1970 to a maximum in excess of 150,000 in September 1974. This volume enhancement was achieved by solving a sequence of problems concerning IMS software, data base design, or program coding. Perhaps the most important factors supporting the increase were two improvements in IMS software: one was the data base buffer pool introduced with IMS 2; the other the feature introduced with IMS VS that, unlike the previous versions, enabled the simultaneous updating of different data base segments belonging to the same type. 相似文献