In Situ Encapsulating α‐MnS into N,S‐Codoped Nanotube‐Like Carbon as Advanced Anode Material: α → β Phase Transition Promoted Cycling Stability and Superior Li/Na‐Storage Performance in Half/Full Cells

Incorporation of N,S‐codoped nanotube‐like carbon (N,S‐NTC) can endow electrode materials with superior electrochemical properties owing to the unique nanoarchitecture and improved kinetics. Herein, α‐MnS nanoparticles (NPs) are in situ encapsulated into N,S‐NTC, preparing an advanced anode material (α‐MnS@N,S‐NTC) for lithium‐ion/sodium‐ion batteries (LIBs/SIBs). It is for the first time revealed that electrochemical α → β phase transition of MnS NPs during the 1st cycle effectively promotes Li‐storage properties, which is deduced by the studies of ex situ X‐ray diffraction/high‐resolution transmission electron microscopy and electrode kinetics. As a result, the optimized α‐MnS@N,S‐NTC electrode delivers a high Li‐storage capacity (1415 mA h g^?1 at 50 mA g^?1), excellent rate capability (430 mA h g^?1 at 10 A g^?1), and long‐term cycling stability (no obvious capacity decay over 5000 cycles at 1 A g^?1) with retained morphology. In addition, the N,S‐NTC‐based encapsulation plays the key roles on enhancing the electrochemical properties due to its high conductivity and unique 1D nanoarchitecture with excellent protective effects to active MnS NPs. Furthermore, α‐MnS@N,S‐NTC also delivers high Na‐storage capacity (536 mA h g^?1 at 50 mA g^?1) without the occurrence of such α → β phase transition and excellent full‐cell performances as coupling with commercial LiFePO₄ and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes in LIBs as well as Na₃V₂(PO₄)₂O₂F cathode in SIBs.     

Hierarchically Porous Fe2CoSe4 Binary‐Metal Selenide for Extraordinary Rate Performance and Durable Anode of Sodium‐Ion Batteries

Owing to high energy capacities, transition metal chalcogenides have drawn significant research attention as the promising electrode materials for sodium‐ion batteries (SIBs). However, limited cycle life and inferior rate capabilities still hinder their practical application. Improvement of the intrinsic conductivity by smart choice of elemental combination along with carbon coupling of the nanostructures may result in excellence of rate capability and prolonged cycling stability. Herein, a hierarchically porous binary transition metal selenide (Fe₂CoSe₄, termed as FCSe) nanomaterial with improved intrinsic conductivity was prepared through an exclusive methodology. The hierarchically porous structure, intimate nanoparticle–carbon matrix contact, and better intrinsic conductivity result in extraordinary electrochemical performance through their synergistic effect. The synthesized FCSe exhibits excellent rate capability (816.3 mA h g^?1 at 0.5 A g^?1 and 400.2 mA h g^?1 at 32 A g^?1), extended cycle life (350 mA h g^?1 even after 5000 cycles at 4 A g^?1), and adequately high energy capacity (614.5 mA h g^?1 at 1 A g^?1 after 100 cycles) as anode material for SIBs. When further combined with lab‐made Na₃V₂(PO₄)₃/C cathode in Na‐ion full cells, FCSe presents reasonably high and stable specific capacity.     

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated,Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Sodium‐ion batteries (SIBs) are considered promising next‐generation energy storage devices. However, a lack of appropriate high‐performance anode materials has prevented further improvements. Here, a hierarchical porous hybrid nanosheet composed of interconnected uniform TiO₂ nanoparticles and nitrogen‐doped graphene layer networks (TiO₂@NFG HPHNSs) that are synthesized using dual‐functional C₃N₄ nanosheets as both the self‐sacrificing template and hybrid carbon source is reported. These HPHNSs deliver high reversible capacities of 146 mA h g^?1 at 5 C for 8000 cycles, 129 mA h g^?1 at 10 C for 20 000 cycles, and 116 mA h g^?1 at 20 C for 10 000 cycles, as well as an ultrahigh rate capability up to 60 C with a capacity of 101 mA h g^?1. These results demonstrate the longest cyclabilities and best rate capability ever reported for TiO₂‐based anode materials for SIBs. The unprecedented sodium storage performance of the TiO₂@NFG HPHNSs is due to their unique composition and hierarchical porous 2D structure.     

Synergizing Phase and Cavity in CoMoOxSy Yolk–Shell Anodes to Co‐Enhance Capacity and Rate Capability in Sodium Storage

Sodium‐ion batteries (SIBs) have been recognized as the promising alternatives to lithium‐ion batteries for large‐scale applications owing to their abundant sodium resource. Currently, one significant challenge for SIBs is to explore feasible anodes with high specific capacity and reversible pulverization‐free Na⁺ insertion/extraction. Herein, a facile co‐engineering on polymorph phases and cavity structures is developed based on CoMo‐glycerate by scalable solvothermal sulfidation. The optimized strategy enables the construction of CoMoO_xS_y with synergized partially sulfidized amorphous phase and yolk–shell confined cavity. When developed as anodes for SIBs, such CoMoO_xS_y electrodes deliver a high reversible capacity of 479.4 mA h g^?1 at 200 mA g^?1 after 100 cycles and a high rate capacity of 435.2 mA h g^?1 even at 2000 mA g^?1, demonstrating superior capacity and rate capability. These are attributed to the unique dual merits of the anodes, that is, the elastic bountiful reaction pathways favored by the sulfidation‐induced amorphous phase and the sodiation/desodiation accommodatable space benefits from the yolk–shell cavity. Such yolk–shell nano‐battery materials are merited with co‐tunable phases and structures, facile scalable fabrication, and excellent capacity and rate capability in sodium storage. This provides an opportunity to develop advanced practical electrochemical sodium storage in the future.     

Bismuth Nanoparticle@Carbon Composite Anodes for Ultralong Cycle Life and High‐Rate Sodium‐Ion Batteries

Bismuth has emerged as a promising anode material for sodium‐ion batteries (SIBs), owing to its high capacity and suitable operating potential. However, large volume changes during alloying/dealloying processes lead to poor cycling performance. Herein, bismuth nanoparticle@carbon (Bi@C) composite is prepared via a facile annealing method using a commercial coordination compound precursor of bismuth citrate. The composite has a uniform structure with Bi nanoparticles embedded within a carbon framework. The nanosized structure ensures a fast kinetics and efficient alleviation of stress/strain caused by the volume change, and the resilient and conductive carbon matrix provides an interconnected electron transportation pathway. The Bi@C composite delivers outstanding sodium‐storage performance with an ultralong cycle life of 30 000 cycles at a high current density of 8 A g^?1 and an excellent rate capability of 71% capacity retention at an ultrahigh current rate of 60 A g^?1. Even at a high mass loading of 11.5 mg cm^?2, a stable reversible capacity of 280 mA h g^?1 can be obtained after 200 cycles. More importantly, full SIBs by pairing with a Na₃V₂(PO₄)₃ cathode demonstrates superior performance. Combining the facile synthesis and the commercial precursor, the exceptional performance makes the Bi@C composite very promising for practical large‐scale applications.     

Controllable Design of MoS2 Nanosheets Grown on Nitrogen‐Doped Branched TiO2/C Nanofibers: Toward Enhanced Sodium Storage Performance Induced by Pseudocapacitance Behavior

In this work, expanded MoS₂ nanosheets grown on nitrogen‐doped branched TiO₂/C nanofibers (NBT/C@MoS₂ NFs) are prepared through electrospinning and hydrothermal treatment method as anode materials for sodium‐ion batteries (SIBs). The continuous 1D branched TiO₂/C nanofibers provide a large surface area to grow expanded MoS₂ nanosheets and enhance the electronic conductivity and cycling stability of the electrode. The large surface area and doping of nitrogen can facilitate the transfer of both Na⁺ ions and electrons. With the merits of these unique design and extrinsic pseudocapacitance behavior, the NBT/C@MoS₂ NFs can deliver ultralong cycle stability of 448.2 mA h g^?1 at 200 mA g^?1 after 600 cycles. Even at a high rate of 2000 mA g^?1, a reversible capacity of 258.3 mA h g^?1 can still be achieved. The kinetic analysis demonstrates that pseudocapacitive contribution is the major factor to achieve excellent rate performance. The rational design and excellent electrochemical performance endow the NBT/C@MoS₂ NFs with potentials as promising anode materials for SIBs.     

Boosting Sodium Storage in TiO2 Nanotube Arrays through Surface Phosphorylation

Sodium‐ion batteries (SIBs) offer a promise of a scalable, low‐cost, and environmentally benign means of renewable energy storage. However, the low capacity and poor rate capability of anode materials present an unavoidable challenge. In this work, it is demonstrated that surface phosphorylated TiO₂ nanotube arrays grown on Ti substrate can be efficient anode materials for SIBs. Fabrication of the phosphorylated nanoarray film is based on the electrochemical anodization of Ti metal in NH₄F solution and subsequent phosphorylation using sodium hypophosphite. The phosphorylated TiO₂ nanotube arrays afford a reversible capacity of 334 mA h g^?1 at 67 mA g^?1, a superior rate capability of 147 mA h g^?1 at 3350 mA g^?1, and a stable cycle performance up to 1000 cycles. In situ X‐ray diffraction and transmission electron microscopy reveal the near‐zero strain response and robust mechanical behavior of the TiO₂ host upon (de)sodiation, suggesting its excellent structural stability in the Na⁺ storage application.     

Homologous Heterostructured NiS/NiS2@C Hollow Ultrathin Microspheres with Interfacial Electron Redistribution for High-Performance Sodium Storage

Nickel sulfides with high theoretical capacity are considered as promising anode materials for sodium-ion batteries (SIBs); however, their intrinsic poor electric conductivity, large volume change during charging/discharging, and easy sulfur dissolution result in inferior electrochemical performance for sodium storage. Herein, a hierarchical hollow microsphere is assembled from heterostructured NiS/NiS₂ nanoparticles confined by in situ carbon layer (H-NiS/NiS₂@C) via regulating the sulfidation temperature of the precursor Ni-MOFs. The morphology of ultrathin hollow spherical shells and confinement of in situ carbon layer to active materials provide rich channels for ion/electron transfer and alleviate the effects of volume change and agglomeration of the material. Consequently, the as-prepared H-NiS/NiS₂@C exhibit superb electrochemical properties, satisfactory initial specific capacity of 953.0 mA h g⁻¹ at 0.1 A g⁻¹, excellent rate capability of 509.9 mA h g⁻¹ at 2 A g⁻¹, and superior longtime cycling life with 433.4 mA h g⁻¹ after 4500 cycles at 10 A g⁻¹. Density functional theory calculation shows that heterogenous interfaces with electron redistribution lead to charge transfer from NiS to NiS₂, and thus favor interfacial electron transport and reduce ion-diffusion barrier. This work provides an innovative idea for the synthesis of homologous heterostructures for high-efficiency SIB electrode materials.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Reactive Oxygen‐Doped 3D Interdigital Carbonaceous Materials for Li and Na Ion Batteries

Carbonaceous materials as anodes usually exhibit low capacity for lithium ion batteries (LIBs) and sodium ion batteries (SIBs). Oxygen‐doped carbonaceous materials have the potential of high capacity and super rate performance. However, up to now, the reported oxygen‐doped carbonaceous materials usually exhibit inferior electrochemical performance. To overcome this problem, a high reactive oxygen‐doped 3D interdigital porous carbonaceous material is designed and synthesized through epitaxial growth method and used as anodes for LIBs and SIBs. It delivers high reversible capacity, super rate performance, and long cycling stability (473 mA h g^?1after 500 cycles for LIBs and 223 mA h g^?1 after 1200 cycles for SIBs, respectively, at the current density of 1000 mA g^?1), with a capacity decay of 0.0214% per cycle for LIBs and 0.0155% per cycle for SIBs. The results demonstrate that constructing 3D interdigital porous structure with reactive oxygen functional groups can significantly enhance the electrochemical performance of oxygen‐doped carbonaceous material.     

Bimetal‐Organic‐Framework Derivation of Ball‐Cactus‐Like Ni‐Sn‐P@C‐CNT as Long‐Cycle Anode for Lithium Ion Battery

Metal phosphides are a new class of potential high‐capacity anodes for lithium ion batteries, but their short cycle life is the critical problem to hinder its practical application. A unique ball‐cactus‐like microsphere of carbon coated NiP₂/Ni₃Sn₄ with deep‐rooted carbon nanotubes (Ni‐Sn‐P@C‐CNT) is demonstrated in this work to solve this problem. Bimetal‐organic‐frameworks (BMOFs, Ni‐Sn‐BTC, BTC refers to 1,3,5‐benzenetricarboxylic acid) are formed by a two‐step uniform microwave‐assisted irradiation approach and used as the precursor to grow Ni‐Sn@C‐CNT, Ni‐Sn‐P@C‐CNT, yolk–shell Ni‐Sn@C, and Ni‐Sn‐P@C. The uniform carbon overlayer is formed by the decomposition of organic ligands from MOFs and small CNTs are deeply rooted in Ni‐Sn‐P@C microsphere due to the in situ catalysis effect of Ni‐Sn. Among these potential anode materials, the Ni‐Sn‐P@C‐CNT is found to be a promising anode with best electrochemical properties. It exhibits a large reversible capacity of 704 mA h g^?1 after 200 cycles at 100 mA g^?1 and excellent high‐rate cycling performance (a stable capacity of 504 mA h g^?1 retained after 800 cycles at 1 A g^?1). These good electrochemical properties are mainly ascribed to the unique 3D mesoporous structure design along with dual active components showing synergistic electrochemical activity within different voltage windows.     

A Chemical Precipitation Method Preparing Hollow–Core–Shell Heterostructures Based on the Prussian Blue Analogs as Cathode for Sodium‐Ion Batteries

Prussian blue and its analogs are regarded as the promising cathodes for sodium‐ion batteries (SIBs). Recently, various special structures are constructed to improve the electrochemical properties of these materials. In this study, a novel architecture of Prussian blue analogs with large cavity and multilayer shells is investigated as cathode material for SIBs. Because the hollow structure can relieve volume expansion and core–shell heterostructure can optimize interfacial properties, the complex structure materials exhibited a highly initial capacity of 123 mA h g^?1 and a long cycle life. After 600 cycles, the reversible capacity of the electrode still maintains at 102 mA h g^?1 without significant voltage decay, indicating a superior structure stability and sodium storage kinetics. Even at high current density of 3200 mA g^?1, the electrode still delivers a considerable capacity above 52 mA h g^?1. According to the electrochemical analysis and ex‐situ measurements, it can be inferred that the enhanced apparent diffusion coefficient and improved insertion/extraction performance of electrode have been obtained by building this new morphology.     

Controllable N‐Doped CuCo2O4@C Film as a Self‐Supported Anode for Ultrastable Sodium‐Ion Batteries

Rational synthesis of flexible electrodes is crucial to rapid growth of functional materials for energy‐storage systems. Herein, a controllable fabrication is reported for the self‐supported structure of CuCo₂O₄ nanodots (≈3 nm) delicately inserted into N‐doped carbon nanofibers (named as 3‐CCO@C); this composite is first used as binder‐free anode for sodium‐ion batteries (SIBs). Benefiting from the synergetic effect of ultrasmall CuCo₂O₄ nanoparticles and a tailored N‐doped carbon matrix, the 3‐CCO@C composite exhibits high cycling stability (capacity of 314 mA h g^?1 at 1000 mA g^?1 after 1000 cycles) and high rate capability (296 mA h g^?1, even at 5000 mA g^?1). Significantly, the Na storage mechanism is systematically explored, demonstrating that the irreversible reaction of CuCo₂O₄, which decomposes to Cu and Co, happens in the first discharge process, and then a reversible reaction between metallic Cu/Co and CuO/Co₃O₄ occurrs during the following cycles. This result is conducive to a mechanistic study of highly promising bimetallic‐oxide anodes for rechargeable SIBs.     

High‐Energy/Power and Low‐Temperature Cathode for Sodium‐Ion Batteries: In Situ XRD Study and Superior Full‐Cell Performance

Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely hinder their practical applications. Here, a high‐voltage cathode composed of Na₃V₂(PO₄)₂O₂F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na⁺/Na with a specific capacity of 127.8 mA h g^?1. The energy density of NVPF‐NTP reaches up to 486 W h kg^?1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.     

A Facile Strategy to Construct Silver‐Modified,ZnO‐Incorporated and Carbon‐Coated Silicon/Porous‐Carbon Nanofibers with Enhanced Lithium Storage

For Si anode materials used for lithium ion batteries (LIBs), developing an effective solution to overcome their drawbacks of large volume change and poor electronic conductivity is highly desirable. Here, the composites of ZnO‐incorporated and carbon‐coated silicon/porous‐carbon nanofibers (ZnO‐Si@C‐PCNFs) are designed and synthesized via a traditional electrospinning method. The prepared ZnO‐Si@C‐PCNFs can obviously overcome these two drawbacks and provide excellent LIB performance with excellent rate capability and stable long cycling life of 1000 cycles with reversible capacity of 1050 mA h g^?1 at 800 mA g^?1. Meanwhile, anodes of ZnO‐Si@C‐PCNFs attached with Ag particles display enhanced LIB performance, maintaining an average capacity of 920 mA h g^?1 at a large current of 1800 mA g^?1 even for 1000 cycles with negligible capacity loss and excellent reversibility. In addition, the assembling method with important practical significance for a simple pouch full cell is designed and used to evaluate the active materials. The Ag/ZnO‐Si@C‐PCNFs are prelithiated and assembled in full cells using LiNi_0.5Co_0.2Mn_0.3O₂(NCM523) as cathodes, exhibiting higher energy density (230 W h kg^?1) of 18% than that of 195 W h kg^?1 for commercial graphite//NCM523 full pouch cells. Importantly, the comprehensive mechanisms of enhanced electrochemical kinetics originating from ZnO‐incorporation and Ag‐attachment are revealed in detail.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

Scalable 2D Mesoporous Silicon Nanosheets for High‐Performance Lithium‐Ion Battery Anode

Constructing unique mesoporous 2D Si nanostructures to shorten the lithium‐ion diffusion pathway, facilitate interfacial charge transfer, and enlarge the electrode–electrolyte interface offers exciting opportunities in future high‐performance lithium‐ion batteries. However, simultaneous realization of 2D and mesoporous structures for Si material is quite difficult due to its non‐van der Waals structure. Here, the coexistence of both mesoporous and 2D ultrathin nanosheets in the Si anodes and considerably high surface area (381.6 m² g^?1) are successfully achieved by a scalable and cost‐efficient method. After being encapsulated with the homogeneous carbon layer, the Si/C nanocomposite anodes achieve outstanding reversible capacity, high cycle stability, and excellent rate capability. In particular, the reversible capacity reaches 1072.2 mA h g^?1 at 4 A g^?1 even after 500 cycles. The obvious enhancements can be attributed to the synergistic effect between the unique 2D mesoporous nanostructure and carbon capsulation. Furthermore, full‐cell evaluations indicate that the unique Si/C nanostructures have a great potential in the next‐generation lithium‐ion battery. These findings not only greatly improve the electrochemical performances of Si anode, but also shine some light on designing the unique nanomaterials for various energy devices.     

Nontopotactic Reaction in Highly Reversible Sodium Storage of Ultrathin Co9Se8/rGO Hybrid Nanosheets

Transition metal chalcogenide with tailored nanosheet architectures with reduced graphene oxide (rGO) for high performance electrochemical sodium ion batteries (SIBs) are presented. Via one‐step oriented attachment growth, a facile synthesis of Co₉Se₈ nanosheets anchored on rGO matrix nanocomposites is demonstrated. As effective anode materials of SIBs, Co₉Se₈/rGO nanocomposites can deliver a highly reversible capacity of 406 mA h g^?1 at a current density of 50 mA g^?1 with long cycle stability. It can also deliver a high specific capacity of 295 mA h g^?1 at a high current density of 5 A g^?1 indicating its high rate capability. Furthermore, ex situ transmission electron microscopy observations provide insight into the reaction path of nontopotactic conversion in the hybrid anode, revealing the highly reversible conversion directly between the hybrid Co₉Se₈/rGO and Co nanoparticles/Na₂Se matrix during the sodiation/desodiation process. In addition, it is experimentally demonstrated that rGO plays significant roles in both controllable growth and electrochemical conversion processes, which can not only modulate the morphology of the product but also tune the sodium storage performance. The investigation on hybrid Co₉Se₈/rGO nanosheets as SIBs anode may shed light on designing new metal chalcogenide materials for high energy storage system.     

Mesoporous and Nanostructured TiO2 layer with Ultra‐High Loading on Nitrogen‐Doped Carbon Foams as Flexible and Free‐Standing Electrodes for Lithium‐Ion Batteries

A simple and green method is developed for the preparation of nanostructured TiO₂ supported on nitrogen‐doped carbon foams (NCFs) as a free‐standing and flexible electrode for lithium‐ion batteries (LIBs), in which the TiO₂ with 2.5–4 times higher loading than the conventional TiO₂‐based flexible electrodes acts as the active material. In addition, the NCFs act as a flexible substrate and efficient conductive networks. The nanocrystalline TiO₂ with a uniform size of ≈10 nm form a mesoporous layer covering the wall of the carbon foam. When used directly as a flexible electrode in a LIB, a capacity of 188 mA h g^?1 is achieved at a current density of 200 mA g^?1 for a potential window of 1.0–3.0 V, and a specific capacity of 149 mA h g^?1 after 100 cycles at a current density of 1000 mA g^?1 is maintained. The highly conductive NCF and flexible network, the mesoporous structure and nanocrystalline size of the TiO₂ phase, the firm adhesion of TiO₂ over the wall of the NCFs, the small volume change in the TiO₂ during the charge/discharge processes, and the high cut‐off potential contribute to the excellent capacity, rate capability, and cycling stability of the TiO₂/NCFs flexible electrode.     

Nitrogen Doped γ‐Graphyne: A Novel Anode for High‐Capacity Rechargeable Alkali‐Ion Batteries

High energy density is the major demand for next‐generation rechargeable batteries, while the intrinsic low alkali metal adsorption of traditional carbon–based electrode remains the main challenge. Here, the mechanochemical route is proposed to prepare nitrogen doped γ‐graphyne (NGY) and its high capacity is demonstrated in lithium (LIBs)/sodium (SIBs) ion batteries. The sample delivers large reversible Li (1037 mAh g^?1) and Na (570.4 mAh g^?1) storage capacities at 100 mA g^?1 and presents excellent rate capabilities (526 mAh g^?1 for LIBs and 180.2 mAh g^?1 for SIBs) at 5 A g^?1. The superior Li/Na storage mechanisms of NGY are revealed by its 2D morphology evolution, quantitative kinetics, and theoretical calculations. The effects on the diffusion barriers (E_b) and adsorption energies (E_ad) of Li/Na atoms in NGY are also studied and imine‐N is demonstrated to be the ideal doping format to enhance the Li/Na storage performance. Besides, the Li/Na adsorption routes in NGY are optimized according to the experimental and the first‐principles calculation results. This work provides a facile way to fabricate high capacity electrodes in LIBs/SIBs, which is also instructive for the design of other heteroatomic doped electrodes.