Self‐Assembled α‐Cyanostilbenes for Advanced Functional Materials

In the specific context of condensed media, the significant and increasing recent interest in the α‐cyanostilbene (CS) motif [? Ar? CH?C(CN)? Ar? ] is relevant. These compounds have shown remarkable optical features in addition to interesting electrical properties, and hence they are recognized as very suitable and versatile options for the development of functional materials. This progress report is focused on current and future use of CS structures and molecular assemblies with the aim of exploring and developing for the next generations of functional materials. A critical selection of illustrative materials that contain the CS motif, including relevant subfamilies such as the dicyanodistyrylbenzene and 2,3,3‐triphenylacrylonitrile shows how, driven by the self‐assembly of CS blocks, a variety of properties, effects, and possibilities for practical applications can be offered to the scientific community, through different rational routes for the elaboration of advanced materials. A survey is provided on the research efforts directed toward promoting the self‐assembly of the solid state (polycrystalline solids, thin films, and single crystals), liquid crystals, nanostructures, and gels with multistimuli responsiveness, and applications for sensors, organic light‐emitting diodes, organic field effect transistors, organic lasers, solar cells, or bioimaging purposes.     

Multi‐Step Crystallization of Self‐Organized Spiral Eutectics

A method for the solidification of metallic alloys involving spiral self‐organization is presented as a new strategy for producing large‐area chiral patterns with emergent structural and optical properties, with attention to the underlying mechanism and dynamics. This study reports the discovery of a new growth mode for metastable, two‐phase spiral patterns from a liquid metal. Crystallization proceeds via a non‐classical, two‐step pathway consisting of the initial formation of a polytetrahedral seed crystal, followed by ordering of two solid phases that nucleate heterogeneously on the seed and grow in a strongly coupled fashion. Crystallographic defects within the seed provide a template for spiral self‐organization. These observations demonstrate the ubiquity of defect‐mediated growth in multi‐phase materials and establish a pathway toward bottom‐up synthesis of chiral materials with an inter‐phase spacing comparable to the wavelength of infrared light. Given that liquids often possess polytetrahedral short‐range order, our results are applicable to many systems undergoing multi‐step crystallization.     

Flexible and Responsive Chiral Nematic Cellulose Nanocrystal/Poly(ethylene glycol) Composite Films with Uniform and Tunable Structural Color

The fabrication of responsive photonic structures from cellulose nanocrystals (CNCs) that can operate in the entire visible spectrum is challenging due to the requirements of precise periodic modulation of the pitch size of the self‐assembled multilayer structures at the length scale within the wavelength of the visible light. The surface charge density of CNCs is an important factor in controlling the pitch size of the chiral nematic structure of the dried solid CNC films. The assembly of poly(ethylene glycol) (PEG) together with CNCs into smaller chiral nematic domains results in solid films with uniform helical structure upon slow drying. Large, flexible, and flat photonic composite films with uniform structure colors from blue to red are prepared by changing the composition of CNCs and PEG. The CNC/PEG(80/20) composite film demonstrates a reversible and smooth structural color change between green and transparent in response to an increase and decrease of relative humidity between 50% and 100% owing to the reversible swelling and dehydration of the chiral nematic structure. The composite also shows excellent mechanical and thermal properties, complementing the multifunctional property profile.     

Freely Suspended,van der Waals Bound Organic Nanometer‐Thin Functional Films: Mechanical and Electronic Characterization

Determining the electronic properties of nanoscopic, low‐dimensional materials free of external influences is key to the discovery and understanding of new physical phenomena. An example is the suspension of graphene, which has allowed access to their intrinsic charge transport properties. Furthermore, suspending thin films enables their application as membranes, sensors, or resonators, as has been explored extensively. While the suspension of covalently bound, electronically active thin films is well established, semiconducting thin films composed of functional molecules only held together by van der Waals interactions could only be studied supported by a substrate. In the present work, it is shown that by utilizing a surface‐crystallization method, electron conductive films with thicknesses of down to 6 nm and planar chiral optical activity can be freely suspended across several hundreds of nanometers. The suspended membranes exhibit a Young's modulus of 2–13 GPa and are electronically decoupled from the environment, as established by temperature‐dependent field‐effect transistor measurements.     

Dual‐Phase Separation in a Semiconfined System: Monodispersed Heterogeneous Block‐Copolymer Membranes for Cell Encoding and Patterning

Block copolymers (BCPs) have the capacity to self‐assemble into a myriad of well‐defined aggregate structures, offering great promise for the construction of drug delivery, photolithographic templates, and complex nanoscale assemblies. A uniqueness of these materials is their propensity to become kinetically frozen in non‐equilibrium states, implying that the process of self‐assembly can be utilized to remodel the resulting structures. Here, a new semiconfined system for processing the BCP self‐assembly is constructed, in which an unusual dual‐phase separation occurs, including nonsolvent‐induced microphase separation and osmotically driven macrophase separation, ultimately yielding heterogeneous BCP membranes. These membranes with cellular dimensions show unique anisotropy that can be used for cell encoding and patterning, which are highly relevant to biology and medicine. This processing method not only provides new levels of tailorability to the structures and encapsulated contents of BCP assemblies, but can also be generalized to other block polymers, particularly those with attractive electronic and/or optical properties.     

Supramolecular Nanostructures of Chiral Perylene Diimides with Amplified Chirality for High‐Performance Chiroptical Sensing

Chiral supramolecular nanostructures with optoelectronic functions are expected to play a central role in many scientific and technological fields but their practical use remains in its infancy. Here, this paper reports photoconductive chiral organic semiconductors (OSCs) based on perylene diimides with the highest electron mobility among the chiral OSCs and investigates the structure and optoelectronic properties of their homochiral and heterochiral supramolecular assemblies from bottom‐up self‐assembly. Owing to the well‐ordered supramolecular packing, the homochiral nanomaterials exhibit superior charge transport with significantly higher photoresponsivity and dissymmetry factor compared with those of their thin film and monomeric equivalents, which enables highly selective detection of circularly polarized light, for the first time, in visible spectral range. Interestingly, the heterochiral nanostructures assembled from co‐self‐assembly of racemic mixtures show extraordinary chiral self‐discrimination phenomenon, where opposite enantiomeric molecules are packed alternately into heterochiral architectures, leading to completely different optoelectrical performances. In addition, the crystal structures of homochiral and heterochiral nanostructures have first been studied by ab initio X‐ray powder diffraction analysis. These findings give insights into the structure–chiroptical property relationships of chiral supramolecular self‐assemblies and demonstrate the feasibility of supramolecular chirality for high‐performance chiroptical sensing.     

Cellulose Nanocrystals from Lignocellulosic Raw Materials,for Oxygen Barrier Coatings on Food Packaging Films

Cellulose nanocrystals (CNCs) are unique, renewable top‐down nano particles from which coatings with improved gas barrier properties and new functionalities can be prepared. In this paper, the potential for obtaining such high performing nanocrystals from low‐cost lignocellulosic by‐products or raw materials is proved by a comparison study on CNCs obtained both from cotton linters and kraft pulp, by means of the ammonium persulfate (APS) process. Morphological and chemical characterization of the nanocrystals obtained, as well as the main functional properties of the poly(ethylene terephthalate) coated films, showed quite similar characteristics and performances of CNCs obtained from pure cellulose raw material (cotton linters) and the nanoparticles produced from a potential discard of paper making processes (kraft pulp). In particular, the gas barrier properties of the coating produced with CNCs obtained from kraft pulp were very promising, providing oxygen and carbon dioxide permeability values hundreds of times lower than those of equal thickness in comparison with common barrier synthetic polymers, over a broad range of temperatures. The results obtained are relevant not only for the outstanding performances achieved, but also because they evoke a possible positive example of industrial symbiosis in the packaging field, merging together the requirements and needs of the paper and plastic industries and addressing the way towards a better management of waste and materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Understanding the Self-Assembly of Cellulose Nanocrystals—Toward Chiral Photonic Materials

Over millions of years, animals and plants have evolved complex molecules and structures that endow them with vibrant colors. Among the sources of natural coloration, structural color is prominent in insects, bird feathers, snake skin, plants, and other organisms, where the color arises from the interaction of light with nanoscale features rather than absorption from a pigment. Cellulose nanocrystals (CNCs) are a biorenewable resource that spontaneously organize into chiral nematic liquid crystals having a hierarchical structure that resembles the Bouligand structure of arthropod shells. The periodic, chiral nematic organization of CNC films leads them to diffract light, making them appear iridescent. Over the past two decades, there have been many advances to develop the photonic properties of CNCs for applications ranging from cosmetics to sensors. Here, the origin of color in CNCs, the control of photonic properties of CNC films, the development of new composite materials of CNCs that can yield flexible photonic structures, and the future challenges in this field are discussed. In particular, recent efforts to make flexible photonic materials using CNCs are highlighted.     

Photonic Glasses: A Step Beyond White Paint

Self‐assembly techniques are widely used to grow ordered structures such as, for example, opal‐based photonic crystals. Here, we report on photonic glasses, new disordered materials obtained via a modified self‐assembling technique. These random materials are solid thin films which exhibit rich novel light diffusion properties originating from the optical properties of their building blocks. This novel material inaugurated a wide range of nanophotonic materials with fascinating applications, such as resonant random lasers or Anderson localization.     

Template‐Free Growth of Well‐Ordered Silver Nano Forest/Ceramic Metamaterial Films with Tunable Optical Responses

Currently, the limitations of conventional methods for fabricating metamaterials composed of well‐aligned nanoscale inclusions either lack the necessary freedom to tune the structural geometry or are difficult for large‐area synthesis. In this Communication, the authors propose a fabrication route to create well‐ordered silver nano forest/ceramic composite single‐layer or multi‐layer vertically stacked structures, as a distinctive approach to make large‐area nanoscale metamaterials. To take advantage of direct growth, the authors fabricate single‐layer nanocomposite films with a well‐defined sub‐5 nm interwire gap and an average nanowire diameter of ≈3 nm. Further, artificially constructed multilayer metamaterial films are easily fabricated by vertical integration of different single‐layer metamaterial films. Based upon the thermodynamics as well as thin film growth dynamics theory, the growth mechanism is presented to elucidate the formation of such structure. Intriguing steady and transient optical properties in these assemblies are demonstrated, owing to their nanoscale structural anisotropy. The studies suggest that the self‐organized nanocomposites provide an extensible material platform to manipulate optical response in the region of sub‐5 nm scale.     

Sonication‐Induced Formation of Size‐Controlled Self‐Assemblies of Amphiphilic Janus‐Type Polymers as Optical Tumor‐Imaging Agents

In this study, amphiphilic Janus‐type polymers were synthesized via ring‐opening metathesis polymerization (ROMP), multiple vicinal diol formation, and grafting of poly(ethylene glycol) monomethyl ether (mPEG). These amphiphilic polymers formed self‐assemblies, which were a mixture of micelles and multimicellar aggregates, in water. By choosing suitable Janus‐type polymers and irradiating an aqueous solution of polymers using a sonicator, either small micelles or large multimicellar aggregates were obtained selectively. Hydrophobic substituents controlled the aggregation–disaggregation behavior, leading to the formation of metastable self‐assemblies by sonication. The formation of self‐assemblies with a uniform size was affected by ultrasonic frequency, rather than power. In vivo optical tumor imaging revealed that the large‐size multimicellar aggregates persisting for a long time in blood circulation slowly accumulated in tumor tissues. In contrast, the tumor site was rapidly, clearly visualized using the small‐size micelles.     

Photopatterning of Cross‐Linkable Epoxide‐Functionalized Block Copolymers and Dual‐Tone Nanostructure Development for Fabrication Across the Nano‐ and Microscales

The self‐assembly of block copolymers in thin films provides an attractive approach to patterning 5–100 nm structures. Cross‐linking and photopatterning of the self‐assembled block copolymer morphologies provide further opportunities to structure such materials for lithographic applications, and to also enhance the thermal, chemical, or mechanical stability of such nanostructures to achieve robust templates for subsequent fabrication processes. Here, model lamellar‐forming diblock copolymers of polystyrene and poly(methyl methacrylate) with an epoxide functionality are synthesized by atom transfer radical polymerization. We demonstrate that self‐assembly and cross‐linking of the reactive block copolymer materials in thin films can be decoupled into distinct, controlled process steps using solvent annealing and thermal treatment/ultraviolet exposure, respectively. Conventional optical lithography approaches can also be applied to the cross‐linkable block copolymer materials in thin films and enable simultaneous structure formation across scales—micrometer scale patterns achieved by photolithography and nanostructures via self‐assembly of the block copolymer. Such materials and processes are thus shown to be capable of self‐assembling distinct block copolymers (e.g., lamellae of significantly different periodicity) in adjacent regions of a continuous thin film.     

Controlling the Photonic Properties of Cholesteric Cellulose Nanocrystal Films with Magnets

The self‐assembly of cellulose nanocrystals is a powerful method for the fabrication of biosourced photonic films with a chiral optical response. While various techniques have been exploited to tune the optical properties of such systems, the presence of external fields has yet to be reported to significantly modify their optical properties. In this work, by using small commercial magnets (≈ 0.5–1.2 T) the orientation of the cholesteric domains is enabled to tune in suspension as they assemble into films. A detailed analysis of these films shows an unprecedented control of their angular response. This simple and yet powerful technique unlocks new possibilities in designing the visual appearance of such iridescent films, ranging from metallic to pixelated or matt textures, paving the way for the development of truly sustainable photonic pigments in coatings, cosmetics, and security labeling.     

Synthetic Self‐Assembled Materials in Biological Environments

Synthetic self‐assembly has long been recognized as an excellent approach for the formation of ordered structures on the nanoscale. Although the development of synthetic self‐assembling materials has often been inspired by principles observed in nature (e.g., the assembly of lipids, DNA, proteins), until recently the self‐assembly of synthetic molecules has mainly been investigated ex vivo. The past few years however, have witnessed the emergence of a research field in which synthetic, self‐assembling systems are used that are capable of operating as bioactive materials in biological environments. Here, this up‐and‐coming field, which has the potential of becoming a key area in chemical biology and medicine, is reviewed. Two main categories of applications of self‐assembly in biological environments are identified and discussed, namely therapeutic and imaging agents. Within these categories key concepts, such as triggers and molecular constraints for in vitro/in vivo self‐assembly and the mode of interaction between the assemblies and the biological materials will be discussed.     

Visible‐Light‐Induced Self‐Organized Helical Superstructure in Orientationally Ordered Fluids

Light‐induced phenomena occurring in nature and in synthetic materials are fascinating and have been exploited for technological applications. Here visible‐light‐induced formation of a helical superstructure is reported, i.e., a cholesteric liquid crystal phase, in orientationally ordered fluids, i.e., nematic liquid crystals, enabled by a visible‐light‐driven chiral molecular switch. The cyclic‐azobenzene‐based chiral molecular switch exhibits reversible photoisomerization in response to visible light of different wavelengths due to the band separation of n–π* transitions of its trans‐ and cis‐isomers. Green light (530 nm) drives the trans‐to‐cis photoisomerization whereas the cis‐to‐trans isomerization process of the chiral molecular switch can be caused by blue light (440 nm). It is observed that the helical twisting power of this chiral molecular switch increases upon irradiation with green light, which enables reversible induction of helical superstructure in nematic liquid crystals containing a very small quantity of the molecular switch. The occurrence of the light‐induced helical superstructure enables the formation of diffraction gratings in cholesteric films.     

Engineering Gyroid‐Structured Functional Materials via Templates Discovered in Nature and in the Lab

In search of optimal structures for functional materials fabrication, the gyroid (G) structure has emerged as a promising subject of widespread research due to its distinct symmetry, 3D interconnected networks, and inherent chiral helices. In the past two decades, researchers have made great progress fabricating G‐structured functional materials (GSFMs) based on G templates discovered both in nature and in the lab. The GSFMs demonstrate extraordinary resonance when interacting with light and matter. The superior properties of GSFMs can be divided into two categories based on the dominant structural properties, namely, dramatic optical performances dominated by short‐range symmetry and well‐defined texture, and effective matter transport due to long‐range 3D interconnections and high integrity. In this review, G templates suitable for fabrication of GSFMs are summarized and classified. State‐of‐the‐art optical applications of GSFMs, including photonic bandgap materials, chiral devices, plasmonic materials, and matamaterials, are systematically discussed. Applications of GSFMs involved in effective electron transport and mass transport, including electronic devices, ultrafiltration, and catalysis, are highlighted. Existing challenges that may hinder the final application of GSFMS together with possible solutions are also presented.     

Atom‐by‐Atom Fabrication of Monolayer Molybdenum Membranes

Fabrication of materials in the monolayer regime to acquire fascinating physical properties has attracted enormous interest during the past decade, and remarkable success has been achieved for layered materials adopting weak interlayer van der Waals forces. However, the fabrication of monolayer metal membranes possessing strong intralayer bonding remains elusive. Here, suspended monolayer Mo membranes are fabricated from monolayer MoSe₂ films via selective electron beam (e‐beam) ionization of Se atoms by scanning transmission electron microscopy (STEM). The nucleation and subsequent growth of the Mo membranes are triggered by the formation and aggregation of Se vacancies as seen by atomic resolution sequential STEM imaging. Various novel structural defects and intriguing self‐healing characteristics are unveiled during the growth. In addition, the monolayer Mo membrane is highly robust under the e‐beam irradiation. It is likely that other metal membranes can be fabricated in a similar manner, and these pure metal‐based 2D materials add to the diversity of 2D materials and introduce profound novel physical properties.     

Polymer‐Based Photonic Crystals

In this report, we highlight the development of polymers as 1D photonic crystals and subsequently place special emphasis on the activities in self‐assembled block copolymers as a promising platform material for new photonic crystals. We review recent progress, including the use of plasticizer and homopolymer blends of diblock copolymers to increase periodicity and the role of self‐assembly in producing 2D and 3D photonic crystals. The employment of inorganic nanoparticles to increase the dielectric contrast and the application of a biasing field during self‐assembly to control the long‐range domain order and orientation are examined, as well as in‐situ tunable materials via a mechanochromic materials system. Finally, the inherent optical anisotropy of extruded polymer films and side‐chain liquid‐crystalline polymers is shown to provide greater degrees of freedom for further novel optical designs.     

Layer‐by‐Layer Hydrogen‐Bonded Polymer Films: From Fundamentals to Applications

Recent years have seen increasing interest in the construction of nanoscopically layered materials involving aqueous‐based sequential assembly of polymers on solid substrates. In the booming research area of layer‐by‐layer (LbL) assembly of oppositely charged polymers, self‐assembly driven by hydrogen bond formation emerges as a powerful technique. Hydrogen‐bonded (HB) LbL materials open new opportunities for LbL films, which are more difficult to produce than their electrostatically assembled counterparts. Specifically, the new properties associated with HB assembly include: 1) the ease of producing films responsive to environmental pH at mild pH values, 2) numerous possibilities for converting HB films into single‐ or two‐component ultrathin hydrogel materials, and 3) the inclusion of polymers with low glass transition temperatures (e.g., poly(ethylene oxide)) within ultrathin films. These properties can lead to new applications for HB LbL films, such as pH‐ and/or temperature‐responsive drug delivery systems, materials with tunable mechanical properties, release films dissolvable under physiological conditions, and proton‐exchange membranes for fuel cells. In this report, we discuss the recent developments in the synthesis of LbL materials based on HB assembly, the study of their structure–property relationships, and the prospective applications of HB LbL constructs in biotechnology and biomedicine.     

Reversible and Irreversible Modulation of Tubulin Self‐Assembly by Intense Nanosecond Pulsed Electric Fields

Tubulin self‐assembly into microtubules is a fascinating natural phenomenon. Its importance is not just crucial for functional and structural biological processes, but it also serves as an inspiration for synthetic nanomaterial innovations. The modulation of the tubulin self‐assembly process without introducing additional chemical inhibitors/promoters or stabilizers has remained an elusive process. This work reports a versatile and vigorous strategy for controlling tubulin self‐assembly by nanosecond electropulses (nsEPs). The polymerization assessed by turbidimetry is dependent on nsEPs dosage. The kinetics of microtubules formation is tightly linked to the nsEPs effects on structural properties of tubulin, and tubulin‐solvent interface, assessed by autofluorescence, and the zeta potential. Moreover, the overall size of tubulin assessed by dynamic light scattering is affected as well. Additionally, atomic force microscopy imaging reveals the formation of different assemblies reflecting applied nsEPs. It is suggested that changes in C‐terminal modification states alter tubulin polymerization‐competent conformations. Although the assembled tubulin preserve their integral structure, they might exhibit a broad range of new properties important for their functions. Thus, these transient conformation changes of tubulin and their collective properties can result in new applications.