Ultrahigh‐Areal‐Capacitance Flexible Supercapacitor Electrodes Enabled by Conformal P3MT on Horizontally Aligned Carbon‐Nanotube Arrays

Nanocarbon electronic conductors combined with pseudocapacitive materials, such as conducting polymers, display outstanding electrochemical properties and mechanical flexibility. These characteristics enable the fabrication of flexible electrodes for energy‐storage devices; that is, supercapacitors that are wearable or can be formed into shapes that are easily integrated into vehicle parts. To date, most nanocarbon materials such as nanofibers are randomly dispersed as a network in a flexible matrix. This morphology inhibits ion transport, particularly under the high current density necessary for devices requiring high power density. Novel flexible densified horizontally aligned carbon nanotube arrays (HACNTs) with controlled nanomorphology for improved ion transport are introduced and combined with conformally coated poly(3‐methylthiophene) (P3MT) conducting polymer to impart pseudocapacitance. The resulting P3MT/HACNT nanocomposite electrodes exhibit high areal capacitance of 3.1 F cm^?2 at 5 mA cm^?2, with areal capacitance remaining at 1.8 F cm^?2 even at a current density of 200 mA cm^?2. The asymmetric supercapacitor cell also delivers more than 1–2 orders of magnitude improvement in both areal energy and power density over state‐of‐the‐art cells. Furthermore, little change in cell performance is observed under high strain, demonstrating the mechanical and electrochemical stability of the electrodes.     

Direct Laser‐Patterned Micro‐Supercapacitors from Paintable MoS2 Films

Micrometer‐sized electrochemical capacitors have recently attracted attention due to their possible applications in micro‐electronic devices. Here, a new approach to large‐scale fabrication of high‐capacitance, two‐dimensional MoS₂ film‐based micro‐supercapacitors is demonstrated via simple and low‐cost spray painting of MoS₂ nanosheets on Si/SiO₂ chip and subsequent laser patterning. The obtained micro‐supercapacitors are well defined by ten interdigitated electrodes (five electrodes per polarity) with 4.5 mm length, 820 μm wide for each electrode, 200 μm spacing between two electrodes and the thickness of electrode is ～0.45 μm. The optimum MoS₂‐based micro‐supercapacitor exhibits excellent electrochemical performance for energy storage with aqueous electrolytes, with a high area capacitance of 8 mF cm^?2 (volumetric capacitance of 178 F cm^?3) and excellent cyclic performance, superior to reported graphene‐based micro‐supercapacitors. This strategy could provide a good opportunity to develop various micro‐/nanosized energy storage devices to satisfy the requirements of portable, flexible, and transparent micro‐electronic devices.     

Oxygen Evolution Assisted Fabrication of Highly Loaded Carbon Nanotube/MnO2 Hybrid Films for High‐Performance Flexible Pseudosupercapacitors

To date, it has been a great challenge to design high‐performance flexible energy storage devices for sufficient loading of redox species in the electrode assemblies, with well‐maintained mechanical robustness and enhanced electron/ionic transport during charge/discharge cycles. An electrochemical activation strategy is demonstrated for the facile regeneration of carbon nanotube (CNT) film prepared via floating catalyst chemical vapor deposition strategy into a flexible, robust, and highly conductive hydrogel‐like film, which is promising as electrode matrix for efficient loading of redox species and the fabrication of high‐performance flexible pseudosupercapacitors. The strong and conductive CNT films can be effectively expanded and activated by electrochemical anodic oxygen evolution reaction, presenting greatly enhanced internal space and surface wettability with well‐maintained strength, flexibility, and conductivity. The as‐formed hydrogel‐like film is quite favorable for electrochemical deposition of manganese dioxide (MnO₂) with loading mass up to 93 wt% and electrode capacitance kept around 300 F g^?1 (areal capacitance of 1.2 F cm^?2). This hybrid film was further used to assemble a flexible symmetric pseudosupercapacitor without using any other current collectors and conductive additives. The assembled flexible supercapacitors exhibited good rate performance, with the areal capacitance of more than 300 mF cm^?2, much superior to other reported MnO₂ based flexible thin‐film supercapacitors.     

Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors

Fiber‐shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one‐step wet‐spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti₃C₂T_x MXene nanosheets and poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm^?1, which is about five times higher than other reported Ti₃C₂T_x MXene‐based fibers (up to ≈290 S cm^?1). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm^?3 at 5 mV s^?1) and an excellent rate performance (≈375.2 F cm^?3 at 1000 mV s^?1). When assembled into a free‐standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm^?3 and ≈8249 mW cm^?3, respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene‐based fiber electrodes and their scalable production for fiber‐based energy storage applications.     

Design of Novel Wearable,Stretchable, and Waterproof Cable‐Type Supercapacitors Based on High‐Performance Nickel Cobalt Sulfide‐Coated Etching‐Annealed Yarn Electrodes

Rapid advances in functional electronics bring tremendous demands on innovation toward effective designs of device structures. Yarn supercapacitors (SCs) show advantages of flexibility, knittability, and small size, and can be integrated into various electronic devices with low cost and high efficiency for energy storage. In this work, functionalized stainless steel yarns are developed to support active materials of positive and negative electrodes, which not only enhance capacitance of both electrodes but can also be designed into stretchable configurations. The as‐made asymmetric yarn SCs show a high energy density of 0.0487 mWh cm^?2 (10.19 mWh cm^?3) at a power density of 0.553 mW cm^?2 (129.1 mW cm^?3) and a specific capacitance of 127.2 mF cm^?2 under an operating voltage window of 1.7 V. The fabricated SC is then made into a stretchable configuration by a prestraining‐then‐releasing approach using polydimethylsiloxane (PDMS) tube, and its electrochemical performance can be well maintained when stretching up to a high strain of 100%. Moreover, the stretchable cable‐type SCs are stably workable under water‐immersed condition. The method opens up new ways for fabricating flexible, stretchable, and waterproof devices.     

High‐Performance Piezoelectric Nanogenerators with Imprinted P(VDF‐TrFE)/BaTiO3 Nanocomposite Micropillars for Self‐Powered Flexible Sensors

Piezoelectric nanogenerators with large output, high sensitivity, and good flexibility have attracted extensive interest in wearable electronics and personal healthcare. In this paper, the authors propose a high‐performance flexible piezoelectric nanogenerator based on piezoelectrically enhanced nanocomposite micropillar array of polyvinylidene fluoride‐trifluoroethylene (P(VDF‐TrFE))/barium titanate (BaTiO₃) for energy harvesting and highly sensitive self‐powered sensing. By a reliable and scalable nanoimprinting process, the piezoelectrically enhanced vertically aligned P(VDF‐TrFE)/BaTiO₃ nanocomposite micropillar arrays are fabricated. The piezoelectric device exhibits enhanced voltage of 13.2 V and a current density of 0.33 µA cm^?2, which an enhancement by a factor of 7.3 relatives to the pristine P(VDF‐TrFE) bulk film. The mechanisms of high performance are mainly attributed to the enhanced piezoelectricity of the P(VDF‐TrFE)/BaTiO₃ nanocomposite materials and the improved mechanical flexibility of the micropillar array. Under mechanical impact, stable electricity is stably generated from the nanogenerator and used to drive various electronic devices to work continuously, implying its significance in the field of consumer electronic devices. Furthermore, it can be applied as self‐powered flexible sensor work in a noncontact mode for detecting air pressure and wearable sensors for detecting some human vital signs including different modes of breath and heartbeat pulse, which shows its potential applications in flexible electronics and medical sciences.     

Graphene‐Based Linear Tandem Micro‐Supercapacitors with Metal‐Free Current Collectors and High‐Voltage Output

Printable supercapacitors are regarded as a promising class of microscale power source, but are facing challenges derived from conventional sandwich‐like geometry. Herein, the printable fabrication of new‐type planar graphene‐based linear tandem micro‐supercapacitors (LTMSs) on diverse substrates with symmetric and asymmetric configuration, high‐voltage output, tailored capacitance, and outstanding flexibility is demonstrated. The resulting graphene‐based LTMSs consisting of 10 micro‐supercapacitors (MSs) present efficient high‐voltage output of 8.0 V, suggestive of superior uniformity of the entire integrated device. Meanwhile, LTMSs possess remarkable flexibility without obvious capacitance degradation under different bending states. Moreover, areal capacitance of LTMSs can be sufficiently modulated by incorporating polyaniline‐based pseudocapacitive nanosheets into graphene electrodes, showing enhanced capacitance of 7.6 mF cm^?2. To further improve the voltage output and energy density, asymmetric LTMSs are fabricated through controlled printing of linear‐patterned graphene as negative electrodes and MnO₂ nanosheets as positive electrodes. Notably, the asymmetric LTMSs from three serially connected MSs are easily extended to 5.4 V, triple voltage output of the single cell (1.8 V), suggestive of the versatile applicability of this technique. Therefore, this work offers numerous opportunities of graphene and analogous nanosheets for one‐step scalable fabrication of flexible tandem energy storage devices integrating with printed electronics on same substrate.     

Vertically Aligned Niobium Nanowire Arrays for Fast‐Charging Micro‐Supercapacitors

Planar micro‐supercapacitors are attractive for system on chip technologies and surface mount devices due to their large areal capacitance and energy/power density compared to the traditional oxide‐based capacitors. In the present work, a novel material, niobium nanowires, in form of vertically aligned electrodes for application in high performance planar micro‐supercapacitors is introduced. Specific capacitance of up to 1 kF m^?2 (100 mF cm^?2) with peak energy and power density of 2 kJ m^?2 (6.2 MJ m^?3 or 1.7 mWh cm^?3) and 150 kW m^?2 (480 MW m^?3 or 480 W cm^?3), respectively, is achieved. This remarkable power density, originating from the extremely low equivalent series resistance value of 0.27 Ω (2.49 µΩ m² or 24.9 mΩ cm²) and large specific capacitance, is among the highest for planar micro‐supercapacitors electrodes made of nanomaterials.     

Facile Synthesis of Vanadium Metal‐Organic Frameworks for High‐Performance Supercapacitors

Compared to traditional metal oxides, metal‐organic frameworks exhibit excellent properties, such as a high surface area, significant thermal stability, low density, and excellent electrochemical performance. Here, a simple process is proposed for the fabrication of rod‐like vanadium metal‐organic frameworks (V^IV(O)(bdc), bdc = 1,4‐benzenedicarboxylate, or MIL‐47), and the effect of the structure on the electrochemical performance is investigated via a series of electrochemical measurements. The V^IV(O)(bdc) electrode exhibits a maximum specific capacitance of 572.1 F g^?1 at current densities of 0.5 A g^?1. More significantly, aqueous and solid‐state asymmetric supercapacitors are successfully assembled. The solid‐state device shows an excellent energy density of 6.72 mWh cm^?3 at a power density of 70.35 mW cm^?3. This superior performance confirms that V^IV(O)(bdc) electrodes are promising materials for applications in supercapacitors.     

Nitrogen‐Doped Carbon Encapsulated Mesoporous Vanadium Nitride Nanowires as Self‐Supported Electrodes for Flexible All‐Solid‐State Supercapacitors

Flexible 3D nanoarchitectures have received tremendous interest recently because of their potential applications in flexible/wearable energy storage devices. Herein, 3D intertwined nitrogen‐doped carbon encapsulated mesoporous vanadium nitride nanowires (MVN@NC NWs) are investigated as thin, lightweight, and self‐supported electrodes for flexible supercapacitors (SCs). The MVN NWs have abundant active sites accessible to charge storage, and the N‐doped carbon shell suppresses electrochemical dissolution of the inner MVN NWs in an alkaline electrolyte, leading to excellent capacitive properties. The flexible MVN@NC NWs film electrode delivers a high areal capacitance of 282 mF cm⁻² and exhibits excellent long‐term stability with 91.8% capacitance retention after 12 000 cycles in a KOH electrolyte. All‐solid‐state flexible SCs assembled by sandwiching two flexible MVN@NC NWs film electrodes with alkaline poly(vinyl alcohol) (PVA), sodium polyacrylate, and KOH gel electrolyte boast a high volumetric capacitance of 10.9 F cm⁻³, an energy density of 0.97 mWh cm⁻³, and a power density of 2.72 W cm⁻³ at a current density of 0.051 A cm⁻³ based on the entire cell. By virtue of the excellent mechanical flexibility, high capacitance, and large energy/power density, the self‐supported MVN@NC NWs paper‐like electrodes have large potential applications in portable and wearable flexible electronics.     

Printable Fabrication of Nanocoral‐Structured Electrodes for High‐Performance Flexible and Planar Supercapacitor with Artistic Design

Planar supercapacitors with high flexibility, desirable operation safety, and high performance are considered as attractive candidates to serve as energy‐storage devices for portable and wearable electronics. Here, a scalable and printable technique is adopted to construct novel and unique hierarchical nanocoral structures as the interdigitated electrodes on flexible substrates. The as‐fabricated flexible all‐solid‐state planar supercapacitors with nanocoral structures achieve areal capacitance up to 52.9 mF cm^?2, which is 2.5 times that of devices without nanocoral structures, and this figure‐of‐merit is among the highest in the literature for the same category of devices. More interestingly, due to utilization of the inkjet‐printing technique, excellent versatility on electrode‐pattern artistic design is achieved. Particularly, working supercapacitors with artistically designed patterns are demonstrated. Meanwhile, the high scalability of such a printable method is also demonstrated by fabrication of large‐sized artistic supercapacitors serving as energy‐storage devices in a wearable self‐powered system as a proof of concept.     

Waterproof,Ultrahigh Areal‐Capacitance,Wearable Supercapacitor Fabrics

High‐performance supercapacitors (SCs) are promising energy storage devices to meet the pressing demand for future wearable applications. Because the surface area of a human body is limited to 2 m², the key challenge in this field is how to realize a high areal capacitance for SCs, while achieving rapid charging, good capacitive retention, flexibility, and waterproofing. To address this challenge, low‐cost materials are used including multiwall carbon nanotube (MWCNT), reduced graphene oxide (RGO), and metallic textiles to fabricate composite fabric electrodes, in which MWCNT and RGO are alternatively vacuum‐filtrated directly onto Ni‐coated cotton fabrics. The composite fabric electrodes display typical electrical double layer capacitor behavior, and reach an ultrahigh areal capacitance up to 6.2 F cm^?2 at a high areal current density of 20 mA cm^?2. All‐solid‐state fabric‐type SC devices made with the composite fabric electrodes and water‐repellent treatment can reach record‐breaking performance of 2.7 F cm^?2 at 20 mA cm^?2 at the first charge–discharge cycle, 3.2 F cm^?2 after 10 000 charge–discharge cycles, zero capacitive decay after 10 000 bending tests, and 10 h continuous underwater operation. The SC devices are easy to assemble into tandem structures and integrate into garments by simple sewing.     

Synthesis of P‐Doped and NiCo‐Hybridized Graphene‐Based Fibers for Flexible Asymmetrical Solid‐State Micro‐Energy Storage Device

Fiber supercapacitors (FSCs) are promising energy storage devices in portable and wearable smart electronics. Currently, a major challenge for FSCs is simultaneously achieving high volumetric energy and power densities. Herein, the microscale fiber electrode is designed by using carbon fibers as substrates and capillary channels as microreactors to space‐confined hydrothermal assembling. As P‐doped graphene oxide/carbon fiber (PGO/CF) and NiCo₂O₄‐based graphene oxide/carbon fiber (NCGO/CF) electrodes are successfully prepared, their unique hybrid structures exhibit a satisfactory electrochemical performance. An all‐solid‐state PGO/CF//NCGO/CF flexible asymmetric fiber supercapacitor (AFSC) based on the PGO/CF as the negative electrode, NCGO/CF hybrid electrode as the positive electrode, and poly(vinyl alcohol)/potassium hydroxide as the electrolyte is successfully assembled. The AFSC device delivers a higher volumetric energy density of 36.77 mW h cm^?3 at a power density of 142.5 mW cm^?3. In addition, a double reference electrode system is adopted to analyze and reduce the IR drop, as well as effectively matching negative and positive electrodes, which is conducive for the optimization and improvement of energy density. For the AFSC device, its better flexibility and electrochemical properties create a promising potential for high‐performance micro‐supercapacitors. Furthermore, the introduction of the double reference electrode system provides an interesting method for the study on the electrochemical performances of two‐electrode systems.     

Nitrogen Codoped Unique Carbon with 0.4 nm Ultra‐Micropores for Ultrahigh Areal Capacitance Supercapacitors

A full understanding of ion transport in porous carbon electrodes is essential for achieving effective energy storage in their applications as electrochemical supercapacitors. It is generally accepted that pores in the size range below 0.5 nm are inaccessible to electrolyte ions and lower the capacitance of carbon materials. Here, nitrogen‐doped carbon with ultra‐micropores smaller than 0.4 nm with a narrow size distribution, which represents the first example of electrode materials made entirely from ultra‐microporous carbon, is prepared. An in situ electrochemical quartz crystal microbalance technique to study the effects of the ultra‐micropores on charge storage in supercapacitors is used. It is found that ultra‐micropores smaller than 0.4 nm are accessible to small electrolyte ions, and the area capacitance of obtained sample reaches the ultrahigh value of 330 µF cm^?2, significantly higher than that of previously reported carbon‐based materials. The findings provide a better understanding of the correlation between ultra‐micropore structure and capacitance and open new avenues for design and development of carbon materials for the next generation of high energy density supercapacitors.     

Hierarchical 3D All‐Carbon Composite Structure Modified with N‐Doped Graphene Quantum Dots for High‐Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all‐carbon electrode materials are prepared by assembling N‐doped graphene quantum dots (N‐GQDs) on carbonized MOF materials (cZIF‐8) interweaved with carbon nanotubes (CNTs) for flexible all‐solid‐state supercapacitors. In this ternary electrode, cZIF‐8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N‐GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N‐GQD@cZIF‐8/CNT electrodes exhibit a high specific capacitance of 540 F g^?1 at 0.5 A g^?1 in a 1 m H₂SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^?1 with a power density of 108.7 W kg^?1. Meanwhile, three supercapacitors connected in series can power light‐emitting diodes for 20 min. All‐solid‐state N‐GQD@cZIF‐8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^?1 with a power density of 89.3 W kg^?1, while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high‐performance energy storage devices via the rational design.     

Vertically Aligned Graphene–Carbon Fiber Hybrid Electrodes with Superlong Cycling Stability for Flexible Supercapacitors

Graphene electrode–based supercapacitors are in high demand due to their superior electrochemical characteristics. A major bottleneck of using the supercapacitors for commercial applications lies in their inferior electrode cycle life. Herein, a simple and facile method to fabricate highly efficient supercapacitor electrodes using pristine graphene sheets vertically stacked and electrically connected to the carbon fibers which can result in vertically aligned graphene–carbon fiber nanostructure is developed. The vertically aligned graphene–carbon fiber electrode prepared by electrophoretic deposition possesses a mesoporous 3D architecture which enabled faster and efficient electrolyte‐ion diffusion with a gravimetric capacitance of 333.3 F g^?1 and an areal capacitance of 166 mF cm^?2. The electrodes displayed superlong electrochemical cycling stability of more than 100 000 cycles with 100% capacitance retention hence promising for long‐lasting supercapacitors. Apart from the electrochemical double layer charge storage, the oxygen‐containing surface moieties and α‐Ni(OH)₂ present on the graphene sheets enhance the charge storage by faradaic reactions. This enables the assembled device to provide an excellent gravimetric energy density of 76 W h kg^?1 with a 100% capacitance retention even after 1000 bending cycles. This study opens the door for developing high‐performing flexible graphene electrodes for wearable energy storage applications.     

Ultrahigh‐Conductivity Polymer Hydrogels with Arbitrary Structures

A poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) hydrogel is prepared by thermal treatment of a commercial PEDOT:PSS (PH1000) suspension in 0.1 mol L^?1 sulfuric acid followed by partially removing its PSS component with concentrated sulfuric acid. This hydrogel has a low solid content of 4% (by weight) and an extremely high conductivity of 880 S m^?1. It can be fabricated into different shapes such as films, fibers, and columns with arbitrary sizes for practical applications. A highly conductive and mechanically strong porous fiber is prepared by drying PEDOT:PSS hydrogel fiber to fabricate a current‐collector‐free solid‐state flexible supercapacitor. This fiber supercapacitor delivers a volumetric capacitance as high as 202 F cm^?3 at 0.54 A cm^?3 with an extraordinary high‐rate performance. It also shows excellent electrochemical stability and high flexibility, promising for the application as wearable energy‐storage devices.     

Interlayer Hydrogen‐Bonded Metal Porphyrin Frameworks/MXene Hybrid Film with High Capacitance for Flexible All‐Solid‐State Supercapacitors

2D metal‐porphyrin frameworks (MPFs) are attractive for advanced energy storage devices. However, the inferior conductivity and low structural stability of MPFs seriously limit their application as flexible free‐standing electrodes with high performance. Here, for the first time, an interlayer hydrogen‐bonded MXene/MPFs film is proposed to overcome these disadvantages by intercalation of highly conductive MXene nanosheets into MPFs nanosheets via a vacuum‐assisted filtration technology. The alternant insertion of MXene and MPFs affords 3D interconnected “MPFs‐to‐MXene‐to‐MPFs” conductive networks to accelerate the ionic/electronic transport rates. Meanwhile, the interlayer hydrogen bonds (F···H? O and O···H? O) contribute a high chemical stability due to a favorable tolerance to volume change caused by phase separation and structural collapse during the charge/discharge process. The synergistic effect makes MXene/MPFs film deliver a capacitance of 326.1 F g^?1 at 0.1 A g^?1, 1.64 F cm^?2 at 1 mA cm^?2, 694.2 F cm^?3 at 1 mA cm^?3 and a durability of about 30 000 cycles. The flexible symmetric supercapacitor shows an areal capacitance of 408 mF cm^?2, areal energy density of 20.4 µW h cm^?2, and capacitance retention of 95.9% after 7000 cycles. This work paves an avenue for the further exploration of 2D MOFs in flexible energy storage devices.     

Inkjet‐Printed High‐Performance Flexible Micro‐Supercapacitors with Porous Nanofiber‐Like Electrode Structures

Flexible planar micro‐supercapacitors (MSCs) with unique loose and porous nanofiber‐like electrode structures are fabricated by combining electrochemical deposition with inkjet printing. Benefiting from the resulting porous nanofiber‐like structures, the areal capacitance of the inkjet‐printed flexible planar MSCs is obviously enhanced to 46.6 mF cm^?2, which is among the highest values ever reported for MSCs. The complicated fabrication process is successfully averted as compared with previously reported best‐performing planar MSCs. Besides excellent electrochemical performance, the resultant MSCs also show superior mechanical flexibility. The as‐fabricated MSCs can be highly bent to 180° 1000 times with the capacitance retention still up to 86.8%. Intriguingly, because of the remarkable patterning capability of inkjet printing, various modular MSCs in serial and in parallel can be directly and facilely inkjet‐printed without using external metal interconnects and tedious procedures. As a consequence, the electrochemical performance can be largely enhanced to better meet the demands of practical applications. Additionally, flexible serial MSCs with exquisite and aesthetic patterns are also inkjet‐printed, showing great potential in fashionable wearable electronics. The results suggest a feasible strategy for the facile and cost‐effective fabrication of high‐performance flexible MSCs via inkjet printing.     

Controllable Synthesis of Atomically Thin Type‐II Weyl Semimetal WTe2 Nanosheets: An Advanced Electrode Material for All‐Solid‐State Flexible Supercapacitors

Compared with 2D S‐based and Se‐based transition metal dichalcogenides (TMDs), Te‐based TMDs display much better electrical conductivities, which will be beneficial to enhance the capacitances in supercapacitors. However, to date, the reports about the applications of Te‐based TMDs in supercapacitors are quite rare. Herein, the first supercapacitor example of the Te‐based TMD is reported: the type‐II Weyl semimetal 1Td WTe₂. It is demonstrated that single crystals of 1Td WTe₂ can be exfoliated into the nanosheets with 2–7 layers by liquid‐phase exfoliation, which are assembled into air‐stable films and further all‐solid‐state flexible supercapacitors. The resulting supercapacitors deliver a mass capacitance of 221 F g^?1 and a stack capacitance of 74 F cm^?3. Furthermore, they also show excellent volumetric energy and power densities of 0.01 Wh cm^?3 and 83.6 W cm^?3, respectively, superior to the commercial 4V/500 µAh Li thin‐film battery and the commercial 3V/300 µAh Al electrolytic capacitor, in association with outstanding mechanical flexibility and superior cycling stability (capacitance retention of ≈91% after 5500 cycles). These results indicate that the 1Td WTe₂ nanosheet is a promising flexible electrode material for high‐performance energy storage devices.