Shape and size control of InAs/InP (113)B quantum dots by Sb deposition during the capping procedure

The role of Sb atoms present on the growth front during capping of InAs/InP (113)B quantum dots (QDs) is investigated by cross-sectional scanning tunnelling microscopy, atomic force microscopy, and photoluminescence spectroscopy. Direct capping of InAs QDs by InP results in partial disassembly of InAs QDs due to the As/P exchange occurring at the surface. However, when Sb atoms are supplied to the growth surface before InP capping layer overgrowth, the QDs preserve their uncapped shape, indicating that QD decomposition is suppressed. When GaAs(0.51)Sb(0.49) layers are deposited on the QDs, conformal growth is observed, despite the strain inhomogeneity existing at the growth front. This indicates that kinetics rather than the strain plays the major role during QD capping with Sb compounds. Thus Sb opens up a new way to control the shape of InAs QDs.     

Effect of capping agents on optical and antibacterial properties of cadmium selenide quantum dots

Cadmium selenide quantum dots (CdSe QDs) were synthesized in aqueous phase by the freezing temperature injection technique using different capping agents (viz. thioglycolic acid, 1-thioglycerol, L-cysteine). Absorption spectra of CdSe QDs exhibited a blue shift as compared to its bulk counterpart, which is an indication of quantum confinement effect. The photoluminescence spectra of CdSe QDs confirmed that the particles are poly-dispersed and possess enhanced luminescent property, depending upon the chemical nature of capping agents. The QDs have been characterized by Fourier-transform infrared spectroscopy, atomic absorption spectroscopy and transmission electron microscopy. Further, antimicrobial activity of as-prepared QDs has also been investigated using the disk diffusion method.     

Enhancement of optical properties of InAs quantum dots grown by using periodic arsine interruption

We investigated the morphological and optical properties of InAs quantum dots (QDs) grown by using periodic arsine interruption (PAI) and compared them with QDs grown conventionally. In the conventional growth, the formation of large islands was observed, which suppresses the nucleation and growth of QDs. Furthermore, the growth of capping layers was significantly degraded by these large islands. On the other hand, in the PAI growth, the formation of large islands was completely suppressed, resulting in the increase of the density and aspect ratio of QDs and the uniform growth of capping layers. As a result of photoluminescence (PL) measurements, we found that the emission efficiency was enhanced and the full-width-half-maximum was reduced to 32 meV. The temperature dependence of these optical properties also revealed the enhancement of the uniformity of QDs grown by the PAI method.     

Synthesis and size dependent optical studies in CdSe quantum dots via inverse micelle technique

Cadmium selenide quantum dots (CdSe QDs) were successfully synthesized without using trioctylphosphine (TOP). The XRD pattern showed zinc-blend phase of the CdSe QDs. The absorption and PL spectra exhibit a strong blue shift as the QDs size decreases due to the quantum confinement effect. In addition, the quantum efficiency of CdSe QDs with TOP capping is higher than CdSe QDs with oleic acid capping. TEM image shows a spherical shape, compact and dense structure of CdSe QDs. A good agreement between the Tauc's model and experimentally measured absorption spectra of CdSe QDs is achieved. The FTIR peak at ～1712 cm^?1 spectra confirms the influence of oleic acid as a capping agent.     

Cytotoxicity tests of water soluble ZnS and CdS quantum dots

Cytotoxicity tests of zinc sulfide (ZnS) and cadmium sulfide (CdS) quantum dots (QDs) synthesized via all-aqueous process with various surface conditions were carried out with human endothelial cells (EA hy926) using two independent viability assays, i.e., by cell counting following Trypan blue staining and by measuring Alamar Blue (AB) fluorescence. The ZnS QDs with all four distinct types of surface conditions were nontoxic at both 1 microM and 10 microM concentrations for at least 6 days. On the other hand, the CdS QDs were nontoxic only at 1 microM, and showed significant cytotoxicity at 10 microM after 3 days in the cell counting assay and after 4 days in the AB fluorescence assay. The CdS QDs with (3-mercaptopropyl)trimethoxysilane (MPS)-replacement plus silica capping were less cytotoxic than those with 3-mercaptopropionic acid (MPA) capping and those with MPS-replacement capping. Comparing the results of ZnS and CdS QDs with the same particle size, surface condition and concentration, it is indicated that the cytotoxicity of CdS QDs and the lack of it in ZnS QDs were probably due to the presence and absence of the toxic Cd element, respectively. The nontoxicity of the aqueous ZnS QDs makes them favorable for in vivo imaging applications.     

Influence of capping ligands on the assembly of quantum dots and their properties

In order to understand the effect of capping ligand on optical and electrical properties of semiconductor quantum dots (QDs), we have added liquid crystal (8CB) to the CdSe/CdS/ZnS QDs monolayer formed via the Langmuir Blodgett technique And studied emission spectra and conducting properties of resulting QDs. The assembly of QDs monolayer modified by liquid crystal (8CB) can be tuned by varying the temperature. The mechanism of the influence of capping ligands on the gap energy, dipole moment and charge distribution within (CdSe)₁₃ cluster was studied via quantum chemical calculations, i.e. we have used density functional theory to systematically investigate the equilibrium configuration of QDs passivated by oleic acid and liquid crystal ligands.     

Dithiocarbamates as capping ligands for water-soluble quantum dots

We investigated the suitability of dithiocarbamate (DTC) species as capping ligands for colloidal CdSe-ZnS quantum dots (QDs). DTC ligands are generated by reacting carbon disulfide (CS(2)) with primary or secondary amines on appropriate precursor molecules. A biphasic exchange procedure efficiently replaces the existing hydrophobic capping ligands on the QD surface with the newly formed DTCs. The reaction conversion is conveniently monitored by UV-vis absorption spectroscopy. Due to their inherent water solubility and variety of side chain functional groups, we used several amino acids as precursors in this reaction/exchange procedure. The performance of DTC-ligands, as evaluated by the preservation of luminescence and colloidal stability, varied widely among amino precursors. For the best DTC-ligand and QD combinations, the quantum yield of the water-soluble QDs rivaled that of the original hydrophobic-capped QDs dispersed in organic solvents. The mean density of DTC-ligands per nanocrystal was estimated through a mass balance calculation which suggested nearly complete coverage of the available nanocrystal surface. The accessibility of the QD surface was evaluated by self-assembly of His-tagged dye-labeled proteins and peptides using fluorescence resonance energy transfer. DTC-capped QDs were also exposed to cell cultures to evaluate their stability and potential use for biological applications. In general, DTC-capped CdSe-ZnS QDs have many advantages over other water-soluble QD formulations and provide a flexible chemistry for controlling the QD surface functionalization. Despite previous literature reports of DTC-stabilized nanocrystals, this study is the first formal investigation of a biphasic exchange method for generating biocompatible core-shell QDs.     

One-pot aqueous synthesis PbS quantum dots and their Hg2+ sensitive properties

In this study, we report the synthesis and stability of PbS quantum dots (QDs) using an aqueous route with L-Cysteine (L-Cys) as the capping molecule. The as-synthesized L-Cys-capped PbS QDs were characterized by high resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD), the results indicated that the QDs were about 4 nm in size and dispersed well with a rock salt crystalline structure, and there was L-Cys on the surface of QDs, which was confirmed by Fourier transform infrared (FT-IR) spectrometry. The influence of various experimental variables, including amounts of capping ligand, pH value and refluxing time, on the luminescent properties of the obtained QDs have been systematically investigated. The QDs exhibited optimal PL intensity when Pb: L-Cys: S = 1:2.2:0.3. In addition, the as-prepared QDs could be used as fluorescence probes to detect Hg2+ ions in aqueous media. The response of QDs fluorescence probes was linearly proportional to the concentration of Hg2+ ions ranging from 8 x 10(-9) to 2 x 10(-6) mol x L(-1) with a limit of detection of 2 x 10(-9) mol x L(-1). Furthermore, the method was successfully applied to the determine Hg2+ ions in different real samples.     

Lasing in ultra-narrow emission from GaAs quantum dots coupled with a two-dimensional layer

We report electrically injected lasing in GaAs quantum dots (QDs) grown on GaAs(001) by droplet epitaxy. High-quality GaAs QDs with superior uniformity are formed using improved growth techniques involving the insertion of a two-dimensional layer, control of the As flux for GaAs crystallization, and thin AlGaAs layer capping with high-temperature annealing. The QDs show ultra-narrow luminescence with a linewidth of 20?meV. Ground-state lasing from a laser diode containing fivefold-stacked QD layers is observed at low temperature under pulsed operation.     

Stable CdS QDs with intense broadband photoluminescence and high quantum yields

Aqueous synthesis of CdS quantum dots (QDs) using thiolactic acid (TLA) as a capping agent was reported. These QDs exhibited excellent colloidal and photostability over a span of 2 years and showed intense broadband and almost white photoluminescence suitable for solid state lighting devices. The photoluminescence (PL) property of the aqueous CdS QDs is optimized by adjusting various processing parameters. The highest quantum yield (QY) achieved for TLA capped CdS QDs of average size 3.5 nm was ∼50%. Luminescence lifetime measurements of CdS-TLA QDs indicated longer lifetimes and a larger contribution of the surface-related emission, indicating removal of quenching defects.     

InAs quantum dots capped by GaAs,In0.4Ga0.6As dots,and In0.2Ga0.8As well

We have fabricated and characterized three types of InAs quantum dots (QDs) with different InxGa1-xAs capping layers. Post-growth atomic force microscopy measurements show that the In0.2Ga0.8As/InAs structure has a smooth surface (dot-in-well structure), whereas the In0.4Ga0.6As/InAs structure revealed large QDs with a density similar to that underneath InAs QDs on GaAs (dot-in-dot). With increasing In mole fraction of the capping layer and increasing In0.4Ga0.6As thickness, the energy position of the room-temperature photoluminescence (PL) peak is red-shifted. The quantum dot-in-dot structure emits stronger room-temperature PL than does the quantum dot-in-well structure. With a spatially distributed strain in the InAs quantum dot, we have solved the three-dimensional Schr?dinger equation by the Green's function theory for the eigenvalues and eigen wave functions. It is concluded that the ground state increases its wave function penetration into the low-barrier InxGa1-xAs capping layer so that its energy position is red-shifted. The reduced PL peak intensity of the dot-in-well (compared with GaAs covered dots) is due to the reduced overlapping between the ground state and the extended states above the GaAs barrier. The overlapping reduction in the dot-in-dot is over compensated for by the reduced relaxation energy (full width at half-maximum), indicating the importance of the sample quality in determining the PL intensity.     

CdSe and CdSe/ZnS quantum dots for the detection of C-reactive protein

In this study, a method for the detection of C-reactive protein (CRP) using CdSe and CdSe/ZnS quantum dots (QDs) is proposed. CdSe and CdSe/ZnS core-shell QDs are synthesised by using 2-mercaptosuccinic acid (MSA) as a capping agent. These QDs were then subjected to various characterisation studies, namely X-ray diffraction and transmission electron microscope for size and structure, Fourier transform infrared spectroscopy for the confirmation of functional groups, ultraviolet–visible absorption and fluorescence spectroscopy for optical characteristics and dynamic light scattering for hydrodynamic changes of QDs. Two biochemical mixtures were developed: one by mixing blood serum containing CRP and CdSe-phosphorylethanolamine (PEA) and the other by mixing blood serum with CdSe/ZnS-PEA. When these mixtures are observed for fluorescence due to interaction of QDs with CRP, a correlation between changes in fluorescence for different concentrations of CRP is noted. The result demonstrates that CRP can be detected with the help of QDs without using any antibodies.     

Hydrothermal synthesis for high-quality CdTe quantum dots capped by cysteamine

We present a facile hydrothermal approach to synthesize high-quality cysteamine (CA)-capped CdTe quantum dots (QDs). Oil bath heating and vigorous stirring were used to obtain better heat transfer and more homogenous solutions during the synthesis process. By this approach, the quantum yield (QY) of the resultant QDs can reach as high as 19.7%, which is the best reported data for CA-stabilized CdTe QDs. The synthesis process is under a high concentration of the precursor (> 10 mM), suggesting the potential of this route to be used in mass production of CA-capped CdTe QDs. Moreover, the pH-dependent optical properties of CA-capped CdTe QDs were also investigated.     

Hole transport in organic field-effect transistors with active poly(3-hexylthiophene) layer containing CdSe quantum dots

Hybrid field-effect transistors (FETs) based on poly(3-hexylthiophene) (P3HT) containing CdSe quantum dots (QDs) were fabricated. The effect of the concentration of QDs on charge transport in the hybrid material was studied. The influence of the QDs capping ligand on charge transport parameters was investigated by replacing the conventional trioctylphosphine oxide (TOPO) surfactant with pyridine to provide closer contact between the organic and inorganic components. Electrical parameters of FETs with an active layer made of P3HT:CdSe QDs blend were determined, showing field-effect hole mobilities up to 1.1×10^?4 cm²/Vs. Incorporation of TOPO covered CdSe QDs decreased the charge carrier mobility while the pyridine covered CdSe QDs did not alter this transport parameter significantly.     

TiO2 nanowires sensitized with CdS quantum dots and the surface photovoltage properties

TiO₂ nanowires prepared by thermal annealing of anodized Ti foil were sensitized with CdS quantum dots (QDs) via chemical bath deposition (CBD). Microstructural characterizations by SEM, TEM and XRD show that the CdS nanocrystals with the cubic structure have intimate contact to the TiO₂ nanowires. The amount of CdS QDs can be controlled by varying the CBD cycles. The experiment results demonstrate that the surface photovoltage (SPV) response intensity was significantly enhanced and the surface photovoltage response region was also expanded obviously for the TiO₂ NWs sensitized by CdS QDs.     

Transfer of Quantum Dots from Pregnant Mice to Pups Across the Placental Barrier

Fluorescent quantum dots (QDs) have great potential for in vivo biomedical imaging and diagnostic applications. However, these nanoparticles are composed of heavy metals and are very small in diameter, and their possible toxicity must therefore be considered. As yet, no studies have reported the transfer of QDs between mother and fetus. The transfer of CdTe/CdS QDs of different sizes and dosages, and with different outer capping materials, from pregnant mice to fetuses is investigated. It is shown that QDs may be transferred from female mice to their fetuses across the placental barrier. Smaller QDs are more easily transferred than larger QDs and the number of QDs transferred increases with increasing dosage. Capping with an inorganic silica shell or organic polyethylene glycol reduces QD transfer but does not eliminate it. These results suggest that the clinical utility of QDs could be limited in pregnant women.     

Synthesis and luminescence characteristics of DHLA-capped PbSe quantum dots with biocompatibility

In this work, we report a facile aqueous route to prepare PbSe QDs with strong photoluminescent and near-infrared (NIR) emission using dihydrolipoic acid (DHLA) as the capping ligands. It was found that the synthesis parameters including the molar ratio of DHLA/Pb, the pH value and the reaction time have considerable influence on photoluminescent intensity (PL) of the PbSe QDs. The as-synthesized DHLA-capped PbSe QDs were characterized by high-resolution transmission electron microscopy (HRTEM), energy-dispersive analysis of X-ray (EDX) and X-ray diffraction (XRD), the results indicated that the QDs were about 8.0 ± 0.2 nm in size and had good monodisperse and a rock salt crystalline structure. Also, there was DHLA on the surface of QDs, which was confirmed by Fourier transform infrared (FT-IR) spectrometry. The PbSe QDs exhibited optimal PL intensity when Pb:Se:DHLA = 1:0.6:1 in weak alkaline aqueous. The as-synthesized QDs kept highly PL intensities when stored in the dark in normal air environment during the period of 60 days. In addition, the biocompatibility of these QDs was measured by hemolytic test, which indicated that DHLA-stabilized QDs are biocompatible. It is important for QDs as biomarkers in biological detection and diagnosis.     

An approach to suppress the blue-shift of photoluminescence peaks in coupled multilayer InAs/GaAs quantum dots by high temperature post-growth annealing

Effect of post-growth annealing on 10 layer stacked InAs/GaAs quantum dots (QDs) with InAlGaAs/GaAs combination capping layer grown by molecular beam epitaxy has been investigated. The QD heterostructure shows a low temperature (8 K) photoluminescence (PL) emission peak at 1267 nm. No frequency shift in the peak emission wavelength is seen even for annealing up to 700 °C which is desirable for laser devices requiring strict tolerances on operating wavelength. This is attributed to the simultaneous effect of the strain field, propagating from the seed layer to the active layer of the multilayer QD (MQD) and the indium atom gradient in the capping layer due to the presence of a quaternary InAlGaAs layer. Higher activation energy (of the order of ∼250 meV) even at 650 °C annealing temperature also signifies the stronger carrier confinement potential of the QDs. All these results demonstrate higher thermal stability of the emission peak of the devices using this QD structure.     

Thin film photodiodes fabricated by electrostatic self-assembly of aqueous colloidal quantum dots

We demonstrate a thin film photodiode structure consisting of multi layers of colloidal quantum dots (QDs) which has application in photovoltaics and photodetection. The CdTe QDs with either positively or negatively charged capping ligands are self-assembled layer-by-layer on an indium tin oxide (ITO) substrate by electrostatic attraction in aqueous solution. A photolithographically patterned photoresist window defines the device active area and an evaporated aluminum (Al) thin film serves as the top electrode. The built-in electric field due to the work function difference between Al and ITO separates photo-excited electron-hole pairs and generates photocurrent. Since the ligands used for QD synthesis are short (less than 0.5 nm), no additional steps of ligand exchange or annealing is needed for enhancing the thin film photoconductivity. Thiol passivation and self-assembly in an inert environment help reduce surface traps, leading to less fermi-level pinning which also improves the device performance.     

Synthesis of highly luminescent CdTe/ZnO core/shell quantum dots in aqueous solution

The synthesis and photoluminescence (PL) properties of aqueous CdTe/ZnO core/shell quantum dots (QDs) have been investigated by using thiolglycolic acid as a capping reagent. The highlighted contribution of the present study was CdTe QDs coated with a ZnO shell by controlling the hydrolysis process of Zn(OAc)₂. The QDs benefitted from overcoming the high lattice mismatch between CdTe and ZnO. The PL peak wavelength of the CdTe/ZnO QDs with high PL quantum yields up to 88% was located in a range between 547 and 596 nm by adjusting the size of CdTe cores and the thickness of ZnO shells. The results of X-ray diffraction analysis and transmission electron microscopy observation indicate that the dot-shaped CdTe/ZnO QDs (566 nm) with an average size of 2.2 nm in diameter belong to the cubic CdTe crystal structure. Due to the passivation of surface defects, it is found that the luminescence decay curves accord with a biexponential decay model of exciton and trap radiation behavior. The average PL lifetimes of CdTe (571 nm) and CdTe/ZnO (596 nm) QDs at room temperature are 27.3 and 35.1 ns, respectively.