用∑WESH图评价某涂料化工厂的可持续性

介绍了在清洁生产过程中用∑WESH图评价涂料化工厂的可持续发展的原理及方法,并进行了一个实例的评价.从该厂的∑WESH图得出该厂的水及能源的利用率高,所用的原材料的稀缺性都不大,唯一较严重的问题是二甲苯的通过量大,危害性较严重.因此建议该厂在配方上尽量减少二甲苯的使用,开发新产品.     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

一代宗师何朝宗瓷塑艺术的文化解读

明代德化瓷塑大师、瓷圣何朝宗的瓷塑艺术具有独特和永恒的艺术魅力,它达到了中国古代瓷塑艺术成就的高峰。何朝宗鬼斧神工的瓷塑艺术将宗教精神、人生哲学、审美情趣融入德化的白瓷,创造出了一件件不朽的瓷塑艺术品,他的艺术风格一直影响到数百年后的今天。现存福建泉州海交馆的何朝宗瓷塑艺术代表作品《渡海观音》,就是一尊何氏精湛的雕塑艺术语言和艺术家心目中的“世上独一无二的艺术珍品”。何朝宗的瓷塑艺术凝铸着一个时代的智慧,它将永恒的闪耀着灿烂的光辉。     

香叶油的研究进展

为了全面了解香叶油的研究现状,为我国香叶油的开发利用提供思路, 综述了香叶的栽培、组培技术研究、香叶油的应用、香叶油的提取及化学成分研究、香叶油调配研究等方面的现状,并对香叶品种的遗传改良提出一些有益的建议.     

胶原纤维的性能特点和作用

1胶原纤维巴西Novaprom胶原纤维是以精选的牛皮内剖层(真皮)组织提取的,它不同于明胶或明胶的衍生物。它的生产是在严格控制的时间和温度范围内进行的,从而确保其主要成分──胶原蛋白的活性不变,并以天然纤维的形式存在。它在肉制品中的结构呈纤维状而不是一般的胶冻,因而这种结构是非常稳定的,是不可逆的。它是很好的功能性动物纤维蛋白,在肉制品及鱼糜制品等相关的食品中得到广泛的应用。2胶原纤维的性能及相关指标(1)蛋白质含量:胶原纤维中的动物蛋白质(M×6.25)高达98%,含有人体必需的氨基酸。(2)吸水、持水性:胶原纤维结构良好,呈矩…     

玻璃纤维拉丝池窑配合料设备研制的进展

玻璃纤维池窑拉丝生产线配合料的制备中,原料是形成优质玻璃液的基础,因此可以说配合料的稳定性、均匀性和准确性对玻璃纤维的质量起着决定的作用.生产实践证明:组分和粒度均匀的配合料,不但能强化玻璃液的熔化和澄清过程,而且还能减少或消除影响玻璃质量的各种弊病.所以认真拟定玻璃纤维原料的成分和选择玻璃纤维的种类和化学性质:严格控制进厂原料化学成分、粒度和水份;做好原料的分堆、存放、加工、称量、混合、输送是优质配合料制备不可缺少的手段,这也是做好玻璃纤维池窑配合料的基本任务.     

鲜为人知的科学珍闻

有言在先,珍闻的挑选奉行以下原则:科学应该是有趣的,科学之所以好玩,部分原因在于你了解、知道这些奇谈怪论的存在。科学的伟大之处在于,它不必是教条的、有价值的实验,也不要求对所有理论进行最准确的过滤以得     

氢氧化镁阻燃剂的研究进展

主要论述了国内外阻燃剂的种类和发展,指出由于环境和健康的原因,无机阻燃剂是最有发展前途的,其中的氢氧化镁因其特有的性质,在无机阻燃剂中尤为突出.考虑到氢氧化镁的广泛应用的前景和其本身的缺点,对其改性成为业界的研究重点,其中主要介绍了钛酸酯、硬脂酸(盐)、镁盐晶须和胶囊化等技术,指出以后的发展方向是在改性基础上的协同作用.     

高浸透性大分子聚酯乳液的研制

1前言 随着池窑生产的发展,原有的浸润剂在快速浸润性和快速浸透性方面无法得到满足.意大利DSM公司聚酯乳液是公认的喷射纱浸润剂最好的成膜剂.本项目的目的是研制出能工业化生产的与DSM公司产品质量相当的聚酯乳液,替代进口,节约外汇,满足我国池窑发展需要,争创良好的经济社会效益.     

利用"三废"制备氧化铁的研究进展

概述了国内利用“三废”(除尘灰、废液、废渣)制备氧化铁的研究进展。探讨了“三废”的危害性和性质,阐述了利用其制备氧化铁的工艺参数、流程和制备原理,分析了所制得材料的性能。对“三废”制备氧化铁的发展方向及其应用前景进行了展望。     

Preparation and characterization of magnetic nanofibers with iron oxide nanoparticles and poly(ethylene terephthalate)

Iron oxide nanoparticle/Poly(ethylene terephthalate) (PET) nanowebs were obtained by electrospinning. To achieve superparamagnetic properties, iron oxide nanoparticles with diameters below 25 nm were used. Diameter distribution of iron oxide nanoparticles was measured by a particle size analyzer. Iron oxide nanoparticles were added into 16 wt % PET solution in the ratio of 5, 10, and 15 wt % to PET. The morphology of iron oxide nanoparticle/PET nanowebs was observed using field emission-scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The nanofiber diameter increased as increasing iron oxide nanoparticle concentration. The superparamagnetic behavior of iron oxide nanoparticle/PET nanofiber was confirmed using superconducting quantum interference device (SQUID). The degree of crystallinity of iron oxide nanoparticle/PET nanowebs was calculated from a differential scanning calorimeter (DSC) results. The change of flexural rigidity and tensile properties of electrospun iron oxide nanoparticle/PET nanowebs with the external magnetic field were examined ISO 9073-7 testing method, universal testing machine and an appropriate magnet. Also, the elastic modulus of iron oxide nanoparticle/PET nanofiber was measured using nanoindentation. With applying magnetic field, the improvement in mechanical properties of field-responsive magnetic nanofibers and nanowebs was confirmed. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

KFS2型复合氧化铁脱硫剂的制备与性能评价

以硫酸亚铁为原料与碳酸氢氨等碱性物质反应,制备不溶性铁的氧化物,将其与活性氧化锌和特殊助剂混合,经混碾和挤条成型工艺制得以氧化铁、氧化锌为活性组分的KFS2型复合氧化铁脱硫剂,并与某常温氧化锌脱硫剂进行性能比较。结果表明,在相同评价条件下,KFS2型复合氧化铁脱硫剂性能明显优于对比剂。     

超临界技术处理铁泥制取铁红

铁泥是染料中间体生产中排出的废弃物,其主要物相为Fe3O4.本文以铁泥为原料,运用超临界水氧化法研究了制取氧化铁红的方法.研究表明,经超临界法处理铁泥,通过高温煅烧,可使Fe3O4转化为α-Fe2O3,处理过程中的压力对产品的品质基本没有影响,其品质远远好于铁泥直接煅烧.超临界法处理铁泥制取铁红是一种可行的非常有潜力的技术方法.     

湿法合成氧化铁颜料规律的探讨

总结和探讨了湿法合成氧化铁颜料一氧化铁黄、铁红、铁黑的基本规律,并对它们的合成条件,如硫酸亚铁浓度、pH值、温度、通气量、气体分散程度等因素进行了优化。这对湿法合成氧化铁颜料及其工业生产过程控制都具有一定的指导意义。     

Production of ketones from sewage sludge over zirconia-supporting iron oxide catalysts in a steam atmosphere

Recovering useful hydrocarbons from sewage sludge using zirconia-supporting iron oxide catalysts was investigated. Zirconia has activity for decomposing water molecules to generate active oxygen and hydrogen species. These oxygen species spill over to the surface of iron oxide and react with hydrocarbons to produce oxygen-containing organic chemicals such as acetone. Thus, zirconia-supporting iron oxide catalyst has two kinds of active sites on zirconia and on iron oxide. Sewage sludge was hydrothermally liquefied at 573 K in advance, yielding black water containing various hydrocarbons, to enhance the contact of reactant molecules with the catalysts. It was found that the hydrocarbons in the black water converted well to a mixture containing primarily acetone without any carbonaceous residue over zirconia-supporting iron oxide catalysts under the conditions of one atmospheric pressure and superheating steam atmosphere. Furthermore, it was confirmed that acetone was produced continuously from the sewage-derived black water over the catalysts using a bench scale flow reactor.     

Fabrication and characterization of zinc oxide nanoparticle coated magnetic iron oxide: Effect of S-layers adsorption on surface of oxide

Mixed zinc oxide nanoparticle coated magnetic iron oxide has been prepared by a sol–gel and co-precipitation routes. Magnetic iron oxide nanoparticles were synthesized by co-precipitation of ferric and ferrous ions with ammonia, and then zinc oxide was coated onto the surface of magnetic iron oxide by hydrolysis of zinc precursors. As a result, zinc oxide coated magnetic iron oxide nanoparticles with an average size of 68 nm were obtained. The crystalline bacterial cell surface layer)S-layer (used in this study was isolated from Lactobacillus helveticus ATCC 12046. The S-layer was adsorbed onto the surface of zinc oxide nanoparticle coated magnetic iron oxide. The nanoparticles were analyzed by X-ray powder diffractometry (XRD), infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FESEM) were used to characterize the structural and the chemical features of the nanocomposites. The infrared spectra indicate that the S-layer-nanoparticle interaction occurs. This novel nanoparticle showed admirable potential in adsorption of S-layers on the surface of oxides for drug delivery.     

Plasma grafting montmorillonite/iron oxide composite with β-cyclodextrin and its application for high-efficient decontamination of U(VI)

β-Cyclodextrin (CD) was grafted onto montmorillonite/iron oxides to prepare a novel magnetic CD/MMT/iron oxide composite by low-temperature plasma technology, and applied to remove U(VI) from aqueous solutions. The sorption irreversibility was attributed to inner-sphere binding of U(VI) on CD/MMT/iron oxide surface sites. The thermodynamic parameters indicated that the sorption of U(VI) on CD/MMT/iron oxide was an endothermic and spontaneous process. The maximum sorption capacity of U(VI) on CD/MMT/iron oxide was considerably higher than that of U(VI) on other reported materials. The CD/MMT/iron oxide can be potentially used as a cost-effective material for the purification of actual U(VI)-bearing effluents.     

Influence of sintering temperature on the properties of pulsed electric current sintered hybrid coreshell powders

The influence of pulsed electric current sintering (PECS) temperature on the properties of bulk materials consolidated from three different types of hybrid powders have been studied. These powders consisted of iron oxide–silica coreshell structure, silver doped iron oxide–silica coreshell structure and, silver doped silica. The powders were prepared using a modified Stöber method. The sintering temperature was varied from 873 K up to 1273 K and sintering pressure and time were 50 MPa and 15 min respectively. Porous structures were obtained with relative densities from about 58 to 68%. Sintering temperature induced the growth of silver nanoparticles on the silica surfaces. Oxidation of the iron oxide during the compaction was affected by thermal decomposition of silver oxides. Sintering temperature changed the magnetic properties of iron oxide compacts via crystallite growth and oxide transformation. At temperature higher than 1173 K, iron oxide was reduced into pure iron (α-Fe).     

涂料工业应用的氧化铁颜料

介绍了涂料工业用的氧化铁颜料,包括铁红、铁黄、铁棕、铁黑、云母氧化铁、透明氧化铁的性能、制造工艺和特点,指出为适应涂料技术向固体、低挥发物的方向发展,今后氧化铁颜料的发展趋势是开发低吸油量、高强度、易分散等品种,扩大其在建筑涂料、卷材涂料、粉末涂料上的应用。