Field-assisted diffusion of K<Superscript>+</Superscript>, Rb<Superscript>+</Superscript>, Cs<Superscript>+</Superscript>, Ag<Superscript>+</Superscript>, and Tl<Superscript>+</Superscript> ions in sodium silicate glass

The composition of the diffusion zone formed during the interaction between 20Na₂O · 80SiO₂ glass and molten silver, rubidium, cesium, and thallium nitrates with and without imposition of a constant electric field was determined using X-ray microanalysis. The interdiffusion coefficients and values of electrical mobility were calculated, and the parameters of temperature dependence were determined. The electrical mobility was almost independent of the size and chemical nature of a cation and was determined by the mobility of the cation included into the initial glass.     

Structural and Activity Investigation into Al<Superscript>3+</Superscript>, La<Superscript>3+</Superscript> and Ce<Superscript>3+</Superscript> Addition to the Phosphomolybdate Heteropolyanion for Isobutane Selective Oxidation

Abstract  

Twelve phosphomolybdate compounds were synthesized via cationic exchange and were of the form: M _x H_3–3x [PMo₁₂O₄₀] (M = Al, La or Ce; 0 ≤ x ≤ 1). These compounds were analyzed by XRD and adsorption isotherm. Aluminum addition causes a primitive cubic phase, while lanthanum and cerium yield body-centered structures. La and Ce addition reduces surface area of phosphomolybdate structure. Temperature-programmed experiments for the selective oxidation of isobutane yielded methacrolein, 3-methyl-2-oxetanone (lactone), acetic acid (not with aluminous compounds), propene (only with aluminous compounds), carbon dioxide and water. The preference for propene rather than acetic acid formation with Al³⁺ may be due to the smaller cation size, or primitive cubic structure. These products form via two distinct reaction processes, labeled categories 1 and 2. Category 1 formation is associated with isobutane forming products on the surface, but reaction rate determined by bulk migration of charged particles. Category 2 formation is concerned with isobutane penetrating deep within the bulk of the substrate and forming products which subsequently desorb in a series of bell-shaped humps. Methacrolein forms via both category 1 and 2, whilst all other products form via category 2 exclusively. Kinetic analysis showed apparent activation barriers for category 1 methacrolein formation range from 67 ± 2 kJ mol⁻¹ to >350 kJ mol⁻¹, and occur in groups with small, medium and large activation barriers. The addition of +3 metal cations to the phosphomolybdate anion increase thermal stability, significantly decreasing deactivation; IR spectroscopy shows that the Keggin structure remains intact during temperature-programmed experiments with the Al, La and Ce salts.     

Thermal Stability and Spectral Properties of Tm<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> CO-Doped Tellurite Glasses

Glasses of the system 75TeO₂–20ZnO–5La₂O₃–0.8Tm₂O₃–xYb₂O₃ were prepared by high temperature melt cooling method. Results of differential scanning calorimetry indicate that, all glass samples have excellent thermal stability. Judd–Ofelt strength parameters, spontaneous emission probabilities, fluorescence branching rations, fluorescence radiative lifetime of Tm³⁺ ions in tellurite glass were calculated. The impact of Yb³⁺ concentration on the fluorescence properties of Tm³⁺ ions in the S band under the pumping wavelength of 465 nm was investigated in a suggestion that, ³H₄ radiative lifetimes will be prolonged and the performance of optical amplifier gain of Tm³⁺ in tellurite glass co-doped with 0.5 mol % Yb³⁺ ions will be improved.     

Visible up-conversion luminescence of CaWO<Subscript>4</Subscript>: Er<Superscript>3+</Superscript>,Yb<Superscript>3+</Superscript> and emission enhancement by tri-doping of Li<Superscript>+</Superscript> ions

Er³⁺,Yb³⁺ co-doped CaWO₄ polycrystalline powders were prepared by a solid-state reaction and their up-conversion (UC) luminescence properties were investigated in detail. Under 980 nm laser excitation, CaWO₄: Er³⁺,Yb³⁺ powder exhibited green UC emission peaks at 530 and 550 nm, which were due to the transitions of Er³⁺ (²H_11/2)→Er³⁺ (⁴I_15/2) and Er³⁺ (⁴S_3/2)→Er³⁺ (⁴I_15/2), respectively. Effects of Li+ tri-doping into CaWO₄: Er³⁺,Yb³⁺ were investigated. The introduction of Li⁺ ions reduced the optimum calcinations temperature about 100 °C by a liquid-phase sintering process and the UC emission intensity was remarkably enhanced by Li⁺ ions, which could be attributed to the lowering of the symmetry of the crystal field around Er³⁺ ions.     

Spectroscopic investigations of Eu<Superscript>3+</Superscript> and Tb<Superscript>3+</Superscript>: Cadmium lead boro tellurite glasses

This paper reports on the preparation and spectral properties of europium (Eu³⁺) and terbium (Tb³⁺) ions doped cadmium lead boro tellurite (CLBT) glasses. For reference glasses, physical properties have been evaluated. From the [measurements of X-ray diffraction (XRD), glass amorphous nature of these [glasses has been studied. From the emission spectra of Eu³⁺: CLBT glasses, five [transitions (⁵ D ₀ → ⁷ F ₀, ⁷ F ₁, ⁷ F ₂, ⁷ F ₃ and ⁷ F ₄) at 579, 591, 613, 652 and 701 nm are observed with λ_exci = 392 nm (⁷ F ₀ → ⁵ L ₆) and in the case of Tb³⁺: CLBT glasses, four emission transitions ⁵ D ₄ → (⁷ F ₆, ⁷ F ₅, ⁷ F ₄ and ⁷ F ₃) are observed at 489, 543, 584 and 621nm respectively monitered with λ_exci = 376 nm (⁷ F ₆ → ⁵ G ₆).     

Fractionation of Soybean Globulins Using Ca<Superscript>2+</Superscript> and Mg<Superscript>2+</Superscript>: A Comparative Analysis

The substitution of CaCl₂ by MgCl₂ was undertaken in Deak’s two-step process of separating the soybean 11S and 7S globulins, aiming at higher purities and lower phytic acid (PA) contents of recovered protein fractions. The effects of pH and the addition of NaCl were also evaluated. Compared with CaCl₂, MgCl₂ reduced the PA content of the 11S-rich fraction by 63–71% but increased that of the 7S-rich fraction by 14–28%, depending on pH. Correspondingly, more Ca²⁺ was recovered in the 11S-rich fraction, while more Mg²⁺ co-precipitated with the 7S-rich fraction. NaCl increased the purity of the 11S-rich fraction and reduced its PA content, but the purity of the 7S-rich fraction was reduced by using 50–100 mM NaCl. Lowering pHs from 6.4 and 4.8 to 5.6 and 4.0 in the two precipitation steps increased the yield of both fractions. The optimized fractionating procedure was as follows: the 11S-rich fraction was precipitated at pH 5.8 by using 5 mM MgCl_2, 10 mM NaHSO₃ and 20 mM NaCl, followed by the precipitation of the 7S-rich fraction at pH 4.5. The new method provided both fractions with satisfactory protein yields (22% for 11S and 16% for 7S), purities (88% for 11S and 80% for 7S) and PA contents (0.356% for 11S and 0.882% for 7S).     

Linseed oil and mixture with maleic anhydride: <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR

It was shown that ¹H NMR allowed a rapid determination of the ratio of the linolenic residues over all the others (linoleic + oleic + saturated) and ¹³C NMR allowed a rapid determination of the ratio of linolenic over (linoleic + oleic) residues as well as the linoleic/oleic ratio in a few minutes on less than 20 mg of crude LO. After thermal treatment (220°C for 2 h, followed by cooling to room temperature), a 1∶1 mixture of linseed oil (LO) and maleic anhydride (MA), which was a suspension, became limpid and remained limpid. Moreover, the viscosity of the mixture was higher than that of pure LO treated in the same way. It was shown by ¹³C NMR and quantitative recovery of the constituents (LO and MA) through solvent separation that no reaction occurred between LO and MA during this thermal treatment. This result is in accord with DSC analysis of such a 1∶1 LO/MA mixture that exhibited an exothermic effect too small (about 34 kcal/mol) to correspond to formation of a C−C bond.     

White Light Emitting Eu<Superscript>III</Superscript> and Tb<Superscript>III</Superscript> Doped Lanthanide Coordination Polymers Based on in Situ Formed Nitrilotriacetic Anion

Three 2D lanthanide coordination polymers of in situ formed nitrilotriacetic anion (NTA^3?) have been hydrothermally synthesized with N-(2-carbamoylmethyl) iminodiacetic acid (H₂ADA) as starting material. The photoluminescence properties as well as the energy-transfer behavior of the resulted coordination polymers are studied in detail and the investigations reveal that both Eu^III and Tb^III complexes show intense emissions characteristic of Eu^III and Tb^III ion under irradiation of 399 nm. Considering the blue-emission of compound Gd^III and the intense emission of Eu^III and Tb^III compounds, we afforded Eu^III and Tb^III doped white light emitting materials by the different combination of the doped Eu^III and Tb^III concentrations.     

Dehydration of aldoximes on rare earth exchanged (La<Superscript>3+</Superscript>, Ce<Superscript>3+</Superscript>, RE<Superscript>3+</Superscript>, Sm<Superscript>3+</Superscript>) Na–Y zeolites: A facile route for the synthesis of nitriles

Rare earth exchanged Na–Y zeolites, H-mordenite, K-10 montmorillonite clay and amorphous silica-alumina were effectively employed for the continuous synthesis of nitriles. Dehydration of benzaldoxime and 4-methoxybenzaldoxime were carried out on these catalysts at 473 K. Benzonitrile (dehydration product) was obtained in near quantitative yield with benzaldoxime whereas; 4-methoxybenzaldoxime produces both Beckmann rearrangement (4-methoxyphenylformamide) as well as dehydration products (4-methoxy benzonitrile) in quantitative yields. The production of benzonitrile was near quantitative under heterogeneous reaction conditions. The optimal protocol allows nitriles to be synthesized in good yields through the dehydration of aldoximes. Time on stream (TOS) studies show decline in the activity of the catalysts due to neutralization of acid sites by the basic reactant and product molecules and water formed during the dehydration of aldoximes.     

Kinetics of <Superscript>14</Superscript>C distribution after tracer dose of <Superscript>14</Superscript>C-lutein in an adult woman

Lutein is an oxygenated carotenoid (xanthophyll) found in dark green leafy vegetables. High intakes of lutein may lower the risk of age-related macular degeneration. Current understanding of human lutein metabolism as it might occur in vivo is incomplete. Therefore, we conducted a feasibility study where we dosed a normal adult woman with ¹⁴C-lutein (125 nmol, 36 nCi ¹⁴C), dissolved in olive oil (0.5 g/kg body weight) and mixed in a banana shake. Blood, urine, and feces collected before the dose was administered served to establish baseline values. There-after, blood was collected for 63 d following the dose, while feces and urine were collected for 2 wk post-dose. The ¹⁴C contents in plasma, urine, and feces were measured by accelerator MS. The ¹⁴C first appeared in plasma 1 h after dosing and reached its highest level,≈2.08% of dose/L plasma, at 14 h post-dose. The plasma pattern of ¹⁴C did not include a chylomicrons/VLDL (intestinal) peak like that when the same subject received ¹⁴C-β-carotene (a previous test), suggesting that lutein was handled differently from β-carotene by plasma lipoproteins. Lutein had an elimination half-life (t _1/2) of≈10 d. Forty-five percent of the dose of ¹⁴C was eliminated in feces and 10% in urine in the first 2 d after dosing. Quantifying human lutein metabolism is a fertile area for future research.     

Effect of Ni<Superscript>2+</Superscript>, V<Superscript>4+</Superscript> and Mo<Superscript>6+</Superscript> concentration on iron oxidation by <Emphasis Type="Italic">Acidithiobacillus ferrooxidans</Emphasis>

The ferrous oxidation ability of Acidithiobacillus ferrooxidans was studied in the presence of Ni²⁺, V⁴⁺ and Mo⁶⁺ in 9 K media in order to implement the culture in the bioleaching of spent catalyst. The rate of iron oxidation decreased with increasing concentration of metal ions, but the rate of inhibition was metal-ion dependent. The tolerance limit was critical at a concentration of 25 g/L Ni²⁺, 5 g/L V⁴⁺ and 0.03 g/L Mo⁶⁺. The growth rate of microorganisms was negligible at concentrations of 6 g/L V⁴⁺ and 0.04 g/L Mo⁶⁺. Levels and degree of toxicity of these ions have been quantified in terms of a toxicity index (TI). The toxicity order of metal ions was found to be Mo⁶⁺>V⁴⁺>Ni²⁺. The significance and relevance of multi-metal ion tolerance in Acidithiobacillus ferrooxidans has been highlighted with respect to bioleaching of spent refinery catalyst.     

SHS-produced Co<Superscript>2+</Superscript>Ti<Superscript>4+</Superscript>-doped barium and strontium hexaferrites: Static and dynamic magnetic properties

Static and dynamic magnetic properties of SHS-produced BaFe_12–2x (Co _х Ti _х )O₁₉ (х = 1.0, 1.1, 1.2) and SrFe_12–2y (Co _y Ti _y )O₁₉ (0 ≤ y ≤ 1.0) hexaferrites were characterized by magnetization and FMR measurements. Dynamic properties of SrFe_12–2y (Co _y Ti _y )O₁₉ hexaferrites were rationalized in terms of not only magnetic anisotropy but also the anisotropy of magnetomechanical ratio. SHS-produced ferrites can be recommended for designing radar-absorbent coatings and other SHF devices operating in the range 20–50 GHz.     

<Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR characterization and stereochemical assignments of bile acids in aqueous media

The unconjugated bile acids cholic acid, deoxycholic acid, and chenodeoxycholic acid; their glycine and taurine conjugated glycocholic acid, glycodeoxycholic acid, glycochenodeoxycholic acid, taurocholic acid, taurodeoxycholic acid, and taurochenodeoxycholic acid; and a taurine conjugated ursodeoxycholic acid, tauroursodeoxycholic acid, were characterized through ¹H and ¹³C NMR in aqueous media under the physiological pH region (7.4±0.1). Assignments of ¹H and ¹³C signals of all the bile acids were made using a combination of several one- and two-dimensional, homonuclear (¹H−¹H) and heteronuclear (¹H−¹³C) correlations as well as spectral editing NMR methods. Stereochemical assignment of the five-membered ring of the bile acids is reported here for the first time. The complete characterization of various bile acids in aqueous media presented here may have implications in the study of the pathophysiology of biliary diseases through human biliary fluids using NMR spectroscopy.     

Hydrothermal synthesis of zeolite L in a Na<Superscript>+</Superscript>/K<Superscript>+</Superscript> mixed alkali system

Zeolite L was prepared from the substrate system of Na₂O-K₂O-Al₂O₃-SiO₂-H₂O at temperatures of 373–443 K by hydrothermal crystallization. The influence of various synthesis parameters such as the concentration ratios of the components, starting raw materials, synthesis temperature, gel aging, and stirring on the crystallization was investigated. Investigations revealed that the crystallinity of zeolite L crystals depends on molar ratios of the components such as SiO₂/Al₂O₃, (K₂O+Na₂O)/SiO₂, Na₂O/(K₂O+Na₂O), and H₂O/(K₂O+Na₂O). Pure and highly crystalline zeolite L could be obtained from a gel with the molar composition 5.4K₂O–5.7Na₂O-Al₂O₃-30SiO₂-500H₂O after 24 h at 443 K. It was found that the silica source affected the crystal size of zeolite L, and as the synthesis temperature increased, the average crystal size became larger. The crystal size could be decreased significantly by stirring the gel or subjecting the substrate mixture to an aging treatment at room temperature prior to the hydrothermal treatment. Thermal stability of the zeolite L crystals obtained was also briefly investigated.     

Er<Superscript>3+</Superscript>- and Tm<Superscript>3+</Superscript>-Containing Ultra-Transparent Oxyfluoride-Based Glass Ceramics for Wavelength Division Multiplexing Optical Amplifiers

Ultratransparent glass ceramics activated with thulium and erbium ions were fabricated. The precursor oxyfluoride glass was 32SiO₂ · 9AlO_1.5 · 31.5CdF₂ · 18.5PbF₂ · 5.5ZnF₂ · 3.5ReO_1.5 with Re = Tm or Er. Upon heat treatment, Er³⁺ and Tm³⁺ nucleate the growth of nanocrystalline β-PbF₂, which acts as a host for rare-earth ions. The spectroscopic properties of the thulium and erbium ions, studied via UV-VIS-NIR absorption and luminescence spectroscopy, show that most of the active ions are embedded in the crystalline phase. From the absorption measurement, we extracted the cross sections of Tm³⁺ ions embedded in the crystalline and glassy phases. The comparison between the experimental lifetimes before and after thermal treatment gave as a result that the ceramming process increases the quantum efficiency of the Tm³⁺ electronic transitions. In the case of Er³⁺-activated glass ceramics, the ⁴ I _13/2 ⇄ ⁴ I _15/2 telecom transition broadens and flattens.Original English Text Copyright © 2005 by Fizika i Khimiya Stekla, Tosello, Montagna, Mattarelli, Ferrari, Chaussedent, Monteil, Tikhomirov, Seddon.This article was submitted by the authors in English.     

Preparation and characterization of layered silicate magadiite intercalated by Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> for antibacterial behavior

The purpose of this work is the synthesis of two series of layered silicate materials with different ratios (10, 30, 50, 80 and 100) of Cu(NO₃)₂, or Zn(NO₃)₂ by ion-exchange method. Several analysis techniques have been used such as X-ray diffraction, energy dispersive X-ray spectroscopy, thermogravimetric analysis, scanning electron microscope and Fourier transform infrared spectroscopy. The results revealed that ion-exchange method of copper and zinc with different ratios did not affect the structure of Na-magadiite. The gap between the theoretical and experimental ion-exchange are in agreement. Antibacterial activity test against Escherichia coli, Rhizobium sp. and Staphylococcus demonstrate that when ratio was (30, 50, 80 and 100) the antibacterial activity of the layered silicate materials showed high antibacterial activity.