共查询到20条相似文献,搜索用时 281 毫秒
1.
3.
介绍了防弹织物的防弹机理以及各种高性能纤维的性能和在防弹衣制造中作用,通过对各种纤维性能的对比,为更高性能防弹衣的制造指明了方向。 相似文献
4.
5.
《国外纺织技术(纺织针织服装化纤染整)》1989,(4)
1.前言人们对于不久前发生于朝日新闻阪神分社的袭击记者事件记忆扰新,这类十分惨痛的事件引起了大家对防弹衣的关注。远在古代,人们把铠甲和头盔当作防弹衣,这些东西的坚硬的笨重给予大家极深刻的印象。而现代的防弹衣既要具有高度的防弹性又要具 相似文献
6.
7.
8.
9.
高效防弹用轻质针刺非织造布荷兰DSM高性能纤维公司开发出一种采用Dyneema高强聚乙烯纤维生产的轻质针刺非织造布,用其制成防弹片杀伤的防弹背心,重量比用机织材料制成的常规防弹衣轻50%。据该公司验收试验表明,这种称作DyneemaFraglight... 相似文献
10.
11.
12.
新型高效电弧防护服——间位芳纶防护服 总被引:1,自引:1,他引:1
NOMEXⅢA由93%NOMEX防火纤维和5%KEVLAR防弹纤维及2%P—140抗静电纤维组成。NOMEXⅢA纤维制成的防护服耐热、阻燃、抗静电及抗爆裂,对电弧造成的危害有较好的防护作用,而且耐穿、色彩丰富、性能价格比高,故应用广泛。 相似文献
13.
介绍了超高分子量聚乙烯纤维的力学性能及其在防弹和防刺材料方面的应用,包括超高分子量聚乙烯纤维制造防弹和防刺材料的结构形式、不同结构形式对防弹和防刺性能的影响,以及目前超高分子量聚乙烯纤维防弹和防刺材料性能的测试方法。 相似文献
14.
15.
Xing J.Qian X.Huang S.Liu F. 《丝绸》2017,(4):5-10
In this paper, the rib fabric woven by ultra high molecular weight polyethylene filament and twisting was directly used as the base fabric. Ultra-high molecular weight polyethylene filament was paved on the rib layer by using the method of multi-pipeline interval conveying, and PET-PA6 bicomponent orange petal fiber spunlace fabric was coated to prevent fiber drift. Then, composite reinforced nonwovens were prepared through spunlace. The experimental results show that: the tensile property, softness and drapability of reinforced nonwovens are between knitted fabric and the common nonwovens, and stab-resistance is better than the two; knitted fabric has greatly improved large elastic stiffness of the ordinary nonwovens; the density of the rib-layer fabric determines the composite effect and the properties of the final product. This product is mainly applied to stab-resistant and bulletproof clothing. Relative to the cascading binding or gluing, spunlaced composite method makes the total thickness of stab-resistant layer reduce 4 mm, and makes the quality decrease by around 1 kg. Besides, the comfort is greatly improved. © 2017 China Silk Association. All rights reserved. 相似文献
16.
17.
18.
文章从军服的抗静电性、抗菌性、易维护性、耐寒耐热性等一般功能以及隐身性、阻燃性、防弹性、防生化性等特殊功能两个方面阐述了未来乃至当今军服应具有的功能性特征,以期在不远的将来,实现多功能性军服的产业化生产,进一步提高士兵的生活质量和作战能力。 相似文献
19.
为确定服装保温性的科学测试方法,采用LD-1型服装保温仪分别在控制服装热阻和环境温度的情况下考查了服装系统的非稳态传热时间;在环境条件不变的情况下,考查了穿着方式对服装热阻的影响;在服装系统不变的情况下,研究了环境温湿度对服装热阻的影响。结果表明:非稳态传热时间会随着服装热阻的增大而延长,随着环境温度的降低而延长;在测量外套类服装时,必须内着一件标准内衣以减少“风洞效应”;并且由于服装热阻的测量值会随着环境温度的升高而增大,从而影响服装热阻测量的准确性,因此所有的测量必须在接近服装的使用环境下进行。 相似文献