Internet connection with UMTS

Mobile telecommunication new services are based on data networks specially Internet. These services include http, telnet, ftp, Simple Mail Transfer Protocol, etc. Besides, we recognize a mobile network as a multiuser network. Transmission Control Protocol (TCP)/Internet Protocol which is sensitive to link congestion in wireline data links is also used in wireless networks. In order to improve the system performance, the TCP layer uses flow control and congestion control. Besides, radio link control (RLC) and medium access control sublayers have been introduced to compensate the deficiency of TCP layer in wireless environment. RLC has an important role in quality of service enhancement of the Universal Mobile Telecommunications System (UMTS). In this paper, we review the protocol stack of UMTS Terrestrial Radio Access Network which is based on Third-Generation Partnership Project. Then, we evaluate its layer 2 error control mechanisms and verify TCP over automatic repeat request error control mechanism and finally quality of service improvement results from it in fading channels.     

Improving reliable transport and handoff performance in cellular wireless networks

TCP is a reliable transport protocol tuned to perform well in traditional networks where congestion is the primary cause of packet loss. However, networks with wireless links and mobile hosts incur significant losses due to bit-errors and handoffs. This environment violates many of the assumptions made by TCP, causing degraded end-to-end performance. In this paper, we describe the additions and modifications to the standard Internet protocol stack (TCP/IP) to improve end-to-end reliable transport performance in mobile environments. The protocol changes are made to network-layer software at the base station and mobile host, and preserve the end-to-end semantics of TCP. One part of the modifications, called the snoop module, caches packets at the base station and performs local retransmissions across the wireless link to alleviate the problems caused by high bit-error rates. The second part is a routing protocol that enables low-latency handoff to occur with negligible data loss. We have implemented this new protocol stack on a wireless testbed. Our experiments show that this system is significantly more robust at dealing with unreliable wireless links than normal TCP; we have achieved throughput speedups of up to 20 times over regular TCP and handoff latencies over 10 times shorter than other mobile routing protocols.This work was supported by ARPA Contract J-FBI-93-153. This paper was in part presented at the ACM Mobile Computing and Networking Conference (Mobicom '95), Berkeley, California, 14–15 November 1995.     

A global architecture for the Wi-family

WiMedia, Wi-Fi, WiMax, Wi-Mobile, WiRAN, the Wi-family is getting bigger; so does the network architecture. It is encouraging to see the fast development of the new IEEE wireless technologies promising the ultimate Internet service deployment on wireless and mobile infrastructures since they would offer larger bandwidth at cheaper price compared to the telecommunication wireless radio resource. However it is disquieting to see that the TCP/IP protocol stack which is supposed to be the heart of the Internet services deployment is not evolving as fast as the wireless technologies do. Here we come up with the hard question which is the network performance of the TCP/IP architecture over wireless networks. It is probably too early to decide to replace TCP/IP by another protocol stack for wireless network support, but it is important to not ignore the problem and analyse the main drawbacks of TCP/IP in wireless networks and think about a new architecture of network communication over the wireless networks. This paper provides a brief survey of what we name here the Wi-family wireless technologies, and emphasizes on new network architecture to optimize the TCP/IP behaviour worsen by the wireless characteristics.     

Efficient Internet traffic delivery over wireless networks

The high demand for wireless Internet connectivity has driven the development of highly efficient radio link technologies. However, their performance can be compromised by inadvertent interactions with the higher-layer TCP flow control protocol. Maximizing the performance of wireless links requires that mechanisms operating at every layer of the protocol stack interact efficiently. This article provides a brief tutorial of some of these radio link enhancements. It then outlines how higher-layer flow control protocols should behave, and provides techniques for taming the behavior of TCP, to ensure that the performance of lower-layer enhancements is not compromised.     

TCP Veno: TCP enhancement for transmission over wireless access networks

Wireless access networks in the form of wireless local area networks, home networks, and cellular networks are becoming an integral part of the Internet. Unlike wired networks, random packet loss due to bit errors is not negligible in wireless networks, and this causes significant performance degradation of transmission control protocol (TCP). We propose and study a novel end-to-end congestion control mechanism called TCP Veno that is simple and effective for dealing with random packet loss. A key ingredient of Veno is that it monitors the network congestion level and uses that information to decide whether packet losses are likely to be due to congestion or random bit errors. Specifically: (1) it refines the multiplicative decrease algorithm of TCP Reno-the most widely deployed TCP version in practice-by adjusting the slow-start threshold according to the perceived network congestion level rather than a fixed drop factor and (2) it refines the linear increase algorithm so that the connection can stay longer in an operating region in which the network bandwidth is fully utilized. Based on extensive network testbed experiments and live Internet measurements, we show that Veno can achieve significant throughput improvements without adversely affecting other concurrent TCP connections, including other concurrent Reno connections. In typical wireless access networks with 1% random packet loss rate, throughput improvement of up to 80% can be demonstrated. A salient feature of Veno is that it modifies only the sender-side protocol of Reno without changing the receiver-side protocol stack.     

Performance study of link layer and MAC layer protocols to support TCP in 3G CDMA systems

Providing support for TCP with good quality link connection is a key issue for future wireless networks in which Internet access is going to be one of the most important data services. A number of schemes have been proposed in literature to improve the TCP performance over wireless links. In this paper, we study the performance of a particular combination of link layer protocol (e.g., radio link protocol or RLP) and MAC retransmissions to support the TCP connections over third generation (3G) wireless CDMA networks. We specifically investigate two metrics - the packet error rate and the delay provided by RLP and MAC retransmissions - both of which are important for TCP performance. For independent and identically distributed (i.i.d) error channels, we propose an analytical model for RLP performance with MAC retransmission. The segmentation of TCP/IP packets into smaller RLP frames, as well as the RLP buffering process, is modeled using a Markov chain. For correlated fading channels, we introduce an analytical metric called RLP retransmission efficiency. We show that: 1) the RLP frame size has significant impact on the overall 3G system performance, 2) MAC layer retransmissions significantly improve the TCP performance, and 3) the RLP retransmission scheme performs better in highly correlated channels, while other scheme performs better in low correlated channels. Simulation results also confirm these conclusions.     

TCP over wireless with link level error control: analysis anddesign methodology

This paper considers the problem of supporting TCP, the Internet data transport protocol, over a lossy wireless link whose quality varies over time. In order to prevent throughput degradation, it is necessary to “hide” the losses and the time variations of the wireless link from TCP. A number of solutions to this problem have been proposed in previous studies, but their performance was studied on a purely experimental basis. This paper presents an approximate analysis, validated by computer simulations, for TCP performance over wireless links. The analysis provides the basis for a systematic approach to supporting TCP over wireless links. The specific case of a Rayleigh-faded wireless link and automatic repeat request-based link-layer recovery is considered for the purpose of illustration. The numerical results presented for this case show that a simple solution, that of using an appropriately designed link-layer error-recovery scheme, prevents excessive deterioration of TCP throughput on wireless links     

Internet protocol performance over networks with wireless links

This article discusses the problems that arise when standard Internet protocols such as TCP are used over wireless links. We review wireless link characteristics with case studies drawn from commercial wireless LANs and cellular telephony systems. We discuss problems with Internet protocols when employed over these systems, such as degraded TCP performance when wireless errors are interpreted as congestion losses. We survey various proposed approaches to mitigating such problems and examine their applicability. Finally, we look at the future of wireless systems and the new challenges that they will create for Internet protocols, and state some goals for further protocol enhancement and evolution, pointing out the need for better protocol integration across layers     

基于物联网的智能家居服务网关的设计

为了实现智能家居系统中的远程及近程控制,从物联网的概念出发,设计实现了一个嵌入式的WEB网关服务器,将基于Zigbee协议的无线传感器网络与基于TCP/IP协议的Internet相联。该设计采用STM32F107VC为主控制器,通过串口实现与WSN协调器的通信,外接一个网卡芯片实现与Internet的连接。在软件设计上重点实现智能家居通信控制系统,并引入嵌入式操作系统uCOS-II对系统资源进行管理,移植LwIP协议栈实现TCP/IP的基本功能。     

Shielding TCP from last hop wireless losses

The pervasiveness of the transport control protocol (TCP) and the proliferation of wireless local area networks (WLAN) of the 802.11 type make the topic of TCP performance over last hop wireless networks very relevant. The Snoop protocol, a link layer solution introduced several years ago to improve the performance of TCP in this scenario, has been shown to neglect its benefits to the most widely used TCP version, TCP SACK. In this paper, we introduce the TCP SACK‐Aware Snoop protocol to address this problem. Our results indicate that the TCP SACK‐Aware Snoop protocol improves the performance of TCP SACK by around 30% compared with the original Snoop protocol and by about 8% in an environment where no TCP enhancing mechanism is in place. In addition, we introduce further modifications to the proposed protocol to make its advantages available to any TCP sender. We also show that the mechanism does not introduce unfairness among TCP sources and somewhat protects TCP against UDP traffic. Our results show important throughput improvements to all TCP versions and demonstrate that the TCP SACK‐Aware Snoop protocol shields TCP from last hop wireless losses providing throughtput values very close to the maximum possible. Copyright © 2006 John Wiley & Sons, Ltd.     

Evaluation of a Split-Connection Mobile Transport Protocol

A performance evaluation is presented for a split-connection protocol for wireless Internet access which is denoted Split-Connection Mobile Tranport Protocol (SCMTP). It uses the general approach of the previously introduced Mobile End Transport Protocol (METP) but with differences that include a wireless-link channel-access protocol better matched with current cellular networks and more general ARQ methods for error control in the wireless link. In common with METP, SCMTP uses a standard TCP protocol on the wire-line connection and isolates the data flow in the wire-line network from the effect of wireless packet errors.Performance is considered for the important case of a single SCMTP split connection between a fixed host and a mobile host with heavy downlink traffic from the fixed host to the mobile host. It is shown for these conditions that if the wire-line packet-error rate is small, a steady state is reached in which the connection's data flow in the wire-line network remains under the control of the receiver-advertised window of the TCP entity at the base station. Performance is evaluated for the steady-state operation of the SCMTP protocol, and relationships are established between the key properties of the split connection and the end-to-end performance of the connection.It is shown that for heavy downlink traffic, the delay in the wire-line part of the connection does not affect steady-state throughput if the receiver buffer is sized appropriately. It is also shown that use of the go-back-N ARQ protocol on the wireless link yields better performance than the stop-and-wait ARQ protocol, although the performance with go-back-N ARQ is more sensitive to the characteristics of the wireless channel. It is shown that under a broad range of conditions, SCMTP with go-back-N ARQ provides nearly optimal utilization of the capacity of the wireless link.     

TCP performance issues over wireless links

This article discusses the problems arising when the TCP/IP protocol suite is used to provide Internet connectivity over existing and emerging wireless links. Due to the strong drive toward wireless Internet access through mobile terminals, these problems must be carefully studied in order to build improved systems. We review wireless link characteristics using wireless LANs and cellular communications systems as examples. We then outline the performance problems of the TCP/IP protocol suite when employed over those links, such as degraded TCP performance due to mistaking wireless errors for congestion. We present various proposals for solving these problems and examine their benefits and limitations. Finally, we consider the future evolution of wireless systems and the challenges that emerging systems will impose on the Internet protocol suite     

Empirical evaluation of receiver‐based TCP delay control in CDMA2000 networks

Wide‐area broadband wireless technologies such as CDMA2000 often suffer from variable transfer rate and long latency. In particular, TCP window‐based rate control causes excessive buffering at the base station because of the lower transfer rate of the wireless link than that of the wired backhaul link. This performance characteristic of TCP further increases the end‐to‐end delay, and additional resources are required at the base station. This paper presents a practical mechanism to control the end‐to‐end TCP delay for CDMA2000 networks (or other similar wireless technologies). The key idea is to reduce and stabilize RTT (round‐trip time) by dynamically controlling the TCP advertised window size, based on a runtime measurement of the wireless channel condition at the mobile station. The proposed system has been implemented by modifying the Linux protocol stack. The experiment results, conducted on a commercial CDMA2000 1x network, show that the proposed scheme greatly reduces the TCP delay in non‐congested networks, while not sacrificing the TCP throughput in congested networks. Copyright © 2006 John Wiley & Sons, Ltd.     

Optimal design of hybrid FEC/ARQ schemes for TCP over wireless links with Rayleigh fading

In this paper, we investigate interactions between TCP and wireless hybrid FEC/ARQ schemes. The aim is to understand what is the best configuration of the wireless link protocol in order to guarantee TCP performance and channel efficiency. Interactions between TCP and different link layer mechanisms are evaluated by means of an analytic model that reproduces: 1) a Rayleigh fading channel with FEC coding, 2) a generic selective repeat ARQ Protocol, and 3) the TCP behavior in a wired-cum-wireless network scenario. The analytic model is validated-by means of ns-based simulations. The analysis represents a contribution to the optimal design of link layer parameters of wireless networks crossed by TCP/IP traffic. The main findings can be summarized as follows: 1) fully reliable ARQ protocols are the best choice for both TCP performance and wireless link efficiency and 2) optimal values of FEC redundancy degree from the point of view of energy efficiency maximizes TCP performance as well.     

TCP-Jersey for wireless IP communications

Improving the performance of the transmission control protocol (TCP) in wireless Internet protocol (IP) communications has been an active research area. The performance degradation of TCP in wireless and wired-wireless hybrid networks is mainly due to its lack of the ability to differentiate the packet losses caused by network congestions from the losses caused by wireless link errors. In this paper, we propose a new TCP scheme, called TCP-Jersey, which is capable of distinguishing the wireless packet losses from the congestion packet losses, and reacting accordingly. TCP-Jersey consists of two key components, the available bandwidth estimation (ABE) algorithm and the congestion warning (CW) router configuration. ABE is a TCP sender side addition that continuously estimates the bandwidth available to the connection and guides the sender to adjust its transmission rate when the network becomes congested. CW is a configuration of network routers such that routers alert end stations by marking all packets when there is a sign of an incipient congestion. The marking of packets by the CW configured routers helps the sender of the TCP connection to effectively differentiate packet losses caused by network congestion from those caused by wireless link errors. This paper describes the design of TCP-Jersey, and presents results from experiments using the NS-2 network simulator. Results from simulations show that in a congestion free network with 1% of random wireless packet loss rate, TCP-Jersey achieves 17% and 85% improvements in goodput over TCP-Westwood and TCP-Reno, respectively; in a congested network where TCP flow competes with VoIP flows, with 1% of random wireless packet loss rate, TCP-Jersey achieves 9% and 76% improvements in goodput over TCP-Westwood and TCP-Reno, respectively. Our experiments of multiple TCP flows show that TCP-Jersey maintains the fair and friendly behavior with respect to other TCP flows.     

Syndrome: a light‐weight approach to improving TCP performance in mobile wireless networks

It is well known that the performance of TCP deteriorates in a mobile wireless environment. This is due to the fact that although the majority of packet losses are results of transmission errors over the wireless links, TCP senders still take packet loss as an indication of congestion, and adjust their congestion windows according to the additive increase and multiplicative decrease (AIMD) algorithm. As a result, the throughput attained by TCP connections in the wireless environment is much less than it should be. The key problem that leads to the performance degradation is that TCP senders are unable to distinguish whether packet loss is a result of congestion in the wireline network or transmission errors on the wireless links. In this paper, we propose a light‐weight approach, called syndrome, to improving TCP performance in mobile wireless environments. In syndrome, the BS simply counts, for each TCP connection, the number of packets that it relays to the destination host so far, and attaches this number in the TCP header. Based on the combination of the TCP sequence number and the BS‐attached number and a solid theoretical base, the destination host will be able to tell where (on the wireline or wireless networks) packet loss (if any) occurs, and notify TCP senders (via explicit loss notification, ELN) to take appropriate actions. If packet loss is a result of transmission errors on the wireless link, the sender does not have to reduce its congestion window. Syndrome is grounded on a rigorous, analytic foundation, does not require the base station to buffer packets or keep an enormous amount of states, and can be easily incorporated into the current protocol stack as a software patch. Through simulation studies in ns‐2 (UCB, LBNL, VINT network simulator, http://www‐mash.cs.berkeley.edu/ns/ ), we also show that syndrome significantly improves the TCP performance in wireless environments and the performance gain is comparable to the heavy‐weight SNOOP approach (either with local retransmission or with ELN) that requires the base station to buffer, in the worst case, a window worth of packets or states. Copyright © 2001 John Wiley & Sons, Ltd.     

PETRA: performance enhancing transport architecture for Satellite communications

This paper presents a performance enhancing transport architecture for the satellite environment. This solution improves the network transport performance by overcoming the limits imposed by a transmission control protocol/Internet protocol (TCP/IP)-based stack suite, while maintaining the interfaces offered by it. This is an important issue since TCP/IP is widely used and most of the applications are based on it. The work starts from the state-of-the-art about the transport layer over satellite by distinguishing two alternative frameworks: the black box (BB) and the complete knowledge (CK) approaches. In the former, the network is considered as a "black box" and only modifications in the terminal tools are permitted. In the latter, the complete control of any network element is allowed so as a performance optimization procedure is possible. The proposed architecture [called Performance Enhancing Transport Architecture (PETRA)] is designed in all details using the second approach. PETRA uses network elements, called relay entities, to isolate the satellite portions in case of heterogeneous networks, while a transport layer protocol stack is used to optimize the transport of information over satellite links. A special satellite transport protocol, that is part of the transport layer protocol stack, is used over such links to perform error recovery. Simulation results show that the proposed framework significantly enhances throughput performance.     

On Providing Support for Protocol Adaptation in Mobile Wireless Networks

The availability of variety of communication devices offers a choice among networks with vastly different characteristics. No single protocol or application can be expected to perform well over all these networks. A mobile host is likely to encounter these different networks and needs to adapt accordingly. The problem of adapting to a changing network environment is further complicated, because changes in network conditions are usually transparent to higher layers of the protocol stack. In order to allow automatic adaptation of applications and protocols, awareness of link conditions and network environment is necessary. In this paper, we present a uniform mechanism based on ICMP messages for providing information about the environment to the protocol stack. We also show how protocols can adapt to changes in the environment, and in particular, demonstrate dynamic fine tuning of some of the well known protocols such as UDP and TCP. Performance measurements demonstrate that our framework imposes little overheads and improves protocol performance under changing network conditions.     

下一代无线网络中的跨层设计

下一代无线通信系统必须能够与互联网实现信息交互,这就需要利用通信协议来实现系统与其他通信系统间的互连互通。但是,现有通信协议基于OSI标准,其协议栈按照严格的分层方式工作,很难适应快速变化的无线通信环境。通过对现有协议栈进行改进,加入跨层设计方案则有助于改善下一代无线系统性能。文章简要分析了分层协议栈局限性,讨论了跨层设计原理,并系统地阐述了跨层设计时物理层、链路层、网络层、传输层和应用层协议应考虑的因素。     

Performance evaluation of TCP/RLP protocol stack over CDMA wireless link

Due to the high frame error rate in wireless communication channels, an additional link layer protocol, Radio Link Protocol (RLP), has been introduced in the newly approvedData Services Option Standard for Wideband Spread Spectrum Digital Cellular System. In this paper, we investigate performance issues of a typical Cod Division Multiple Access (CDMA) wireless link using the protocol stack given in the standard. In particular, we focus on the dynamics of the TCP and RLP layers of the protocol stack since the fluctuation of system performance is largely caused by Automatic Repeat Request (ARQ) mechanisms implemented at these two layers. We compare the network performance of default parameter setting to those of other possible parameter settings. Analytical and simulation results presented in this paper can provide guidance to those attempting to further improve performance of interest.