Effect of heat treatment on the properties of nanocrystalline 80 wt % Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-20 wt % ZrO<Subscript>2</Subscript>〈CeO<Subscript>2</Subscript>, Y<Subscript>2</Subscript>O<Subscript>3</Subscript>〉 powder

We have studied the evolution of nanocrystalline 80 wt % Al₂O₃-20 wt % ZrO₂〈CeO₂, Y₂O₃〉 powder prepared through hydroxide coprecipitation followed by hydrothermal decomposition of the hydroxides and firing at temperatures from 400 to 1300°C. α-Al₂O₃ has been shown to form at 850°C. The metastable phase F-ZrO₂ persists up to this temperature. The variation in the morphology of the powder is topologically continuous. The processes induced by heat treatment of the nanocrystalline powder are interpreted in terms of the evolution of an open system.     

Effect of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> on the dynamics of Li<Superscript>+</Superscript> ions in Li<Subscript>2</Subscript>O·P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Lithium ion transport has been studied in bismuth lithium phosphate glasses in the frequency range 20 Hz–1 MHz and in the temperature range 423–573 K using impedance spectroscopy. The addition of Bi₂O₃ in Li₂O·P₂O₅ glass is related to the modification of the glass structure and facilitates the Li⁺ ions migration. The ac and dc conductivities, activation energy of the dc conductivity and relaxation frequency are extracted from the impedance spectra. Conductivity of the present glass system is found to be ionic in nature. The electrical response of the glasses has been studied using both conductivity and electric modulus formalisms. A single ‘master curve’ for normalized plots of all the modulus isotherms observed for a given composition indicates the temperature independence of the dynamic processes for ions in these glasses. Nearly identical values of activation energy for dc conduction and for conductivity relaxation time indicate that the ions overcome same energy barrier while conducting and relaxing.     

Fabrication of Yb<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> Optical Fibers with a Perfect Step-Index Profile by the MCVD Process

An all-vapor phase MCVD process has been proposed for the fabrication of fiber preforms with a Yb₂O₃–Al₂O₃–P₂O₅–SiO₂ multicomponent glass core. We have investigated the tubular preform collapse into a rod and demonstrated approaches capable of preventing P₂O₅ losses in the central part of the core during the collapse process. Preforms with a flat, perfect step-index profile have been fabricated.     

High-temperature heat capacity of the oxide compounds in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The compounds BiVO₄, Bi₄V₂O₁₁, and Bi₁₂V₂O₂₃ have been prepared by solid-state synthesis using stoichiometric mixtures of Bi₂O₃ and V₂O₅. The effect of temperature on the heat capacity of the synthesized bismuth vanadates has been studied by differential scanning calorimetry in the range 350–950 K. The C _p (T) curves have extrema at 531.7 K for BiVO₄ and at 725.2 and 852.8 K for Bi₄V₂O₁₁, which are due to polymorphic transformations of these compounds.     

Effect of sintering temperatures on properties of BaO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> glass/silica composites for CBGA package

BaO–B₂O₃–SiO₂–Al₂O₃ (BBSA) glass/silica composites synthesized by solid-state reaction method were developed for CBGA packages, and the effects of sintering temperature (900–950 °C) on the phase transformation, microstructure, thermal, mechanical and electrical properties were investigated. XRD results show that the major phases quartz and cristobalite, and the minor phase BaSi₂O₅ are detected in BBSA composites. Furthermore, it was found that the quartz phase transforms to cristobalite phase at 930–940 °C. The formation of cristobalite phase with higher coefficient of thermal expansion (CTE) led to the increase of CTE value of BBSA composites. However, excessive cristobalite phase content would degrade the mechanical properties and the linearity of thermal expansion of the ceramics. BBSA composites sintered at 920 °C exhibited excellent properties: low dielectric constant and loss (ε_r = 6.2, tanδ = 10^?4 at 1 MHz), high bending strength (179 MPa), high CTE (12.19 ppm/°C) as well as superior linearity of the thermal expansion.     

The effect of Fe contents on the local structure and crystallization behavior of SiO<Subscript>2</Subscript>–CaO–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

The glass and glass ceramics containing SiO₂–CaO–Fe₂O₃–P₂O₅ were prepared by sol–gel method. The influence of the Fe contents on the crystallization and local structure of the glass and glass ceramics was systematically investigated. The crystal structure of the glass ceramics was identified by XRD characterization. Hematite phase can be precipitated from the glass matrix in all glass ceramics with various Fe contents, and the crystallographic parameters of hematite were determined by XRD Rietveld refinement. The crystallization kinetics of the glasses was investigated in detail. Relative low activation energies were obtained at low Fe contents. The local structure evolution of the glass and glass ceramics has been studied in-depth by means of FTIR and Mössbauer spectroscopy. Fe element is present both as network former and network modifier which significantly influenced the crystallization activation energies of the glasses. The results of this work may be of great significance for the material design and practical applications of bioactive magnetic glass ceramics for hyperthermia.     

Characterization of phases in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>–Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> system obtained by high-energy ball milling and high-temperature treatment

It has been demonstrated that apart from the known compounds YbVO₄ and Yb₈V₂O₁₇, a substitutive solid solution is also formed in the binary oxide system V₂O₅–Yb₂O₃. This solid solution is characterized by limited solubility of vanadium(V) oxide in the crystal lattice of ytterbium oxide, and its general formula is Yb_2?5x□_2xV_3xO₃, where 0.00?<?x?<?0.1667. The new solid solution was obtained from the mixtures of V₂O₅ and Yb₂O₃ oxides, containing vanadium(V) oxide in the amounts not exceeding 30 mol%, by high-energy ball milling in a planetary ball mill. The solid solution obtained was characterized using the methods XRD, DTA-TG, SEM, IR and UV–Vis-DR. It was found to crystallize in cubic system and to show a structure of Yb₂O₃. This solid solution was stable in air atmosphere at least up to?~?800 °C, and the temperature of its decomposition decreased with increasing x, so with increasing degree of Yb³⁺ replacement with V⁵⁺ in the crystal lattice of Yb₂O₃. The energy gap estimated for this solid solution varied from?~?2.5 eV for x?=?0.0322 to?~?2.6 eV for x?=?0.1176, which means that this new solid solution is a semiconductor.     

Influence of Bi substitution on microwave dielectric properties of BaO–La<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> ceramics

The influences of Bi substitution on microwave dielectric properties of Ba₄(La_0.5Sm_0.5)_9.33Ti₁₈O₅₄ solid solutions were investigated. Dielectric ceramics with general formula Ba₄(La_(0.5−z)Sm_0.5Bi _z )_9.33Ti₁₈O₅₄, z = 0.0–0.2 were prepared by conventional solid state route. The structural analysis of all the samples was carried out by X-ray diffraction and scanning electron microscopy. The dielectric properties were investigated as a function of Bi contents using open-ended coaxial probe method in the frequency range 0.3–3.0 GHz at room temperature. Dielectric constant varies from 83 to 88 and loss tangent from 2.1 × 10⁻³ to 5.5 × 10⁻³ at 3 GHz with temperature coefficient of resonant frequency changing from 106.7 to −8.4 ppm/oC as Bi contents increases from z = 0.00–0.20. It has been found that dielectric constant and temperature coefficient of resonant frequency improve whereas loss tangent is adversely affected with increase in Bi substitution.     

The Effect of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Buffer Layer on the Magnetic Properties of Melt-Processed YBCO Superconductor

In this study, two kinds of melt-processed YBCO samples (Y1050-1 and Y1050-2) grown on a buffer layer of Y₂O₃ addition were fabricated. The compacted powders were located on a crucible with Y₂O₃ powder freely poured and a buffer layer of pressed Y₂O₃ to avoid liquid to spread on the furnace plate. The superconducting transition temperature was determined by a standard four-point method at temperatures between 40 and 100 K. The transition temperatures of Y1050-1 and Y1050-2 were found to be 91.6 and 92.9 K at zero magnetic fields, respectively. The magnetization measurements were performed using a vibrating sample magnetometer (VSM) on the same system at 5, 40, and 77 K. The critical current densities for Y1050-1 and Y1050-2 samples were determined to be 6.5×10³ and 5.6×10³ A/cm² at 77 K in zero magnetic fields, respectively. The trapped magnetic field measurements of the samples were performed by using a Hall probe scanning device and a Fe–Nd–B permanent magnet at 77 K. It was found that the trapped magnetic field of the Y1050-1 sample is higher than that of the Y1050-2 sample.     

Effect of the Additive of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> on the Structure Formation and Properties of Composite Materials Based on AlN–SiC

The results of studies on the strength at bending and volumetric electrical resistance of composite materials based on AlN–SiC with additions from 2 to 6 wt % Y₂O₃. It is shown that at increasing the content of Y2O3 in the mixture from 2 to 6 wt % the compaction of the composites intensifies their electrical resistance from (1.4–5.4) × 10⁶ to (1.8–5.94) × 10⁷ Ohm·cm (at 20°C), which at the increasing temperature decreases exponentially and at 800°C for all composites is (5–6) × 10⁴ Ohm·cm. It was determined that materials with the smaller content of Y₂O₃ have somewhat higher value of the ultimate strength during bending, namely, 110 MPa.     

Thermal and dielectric properties of the LTCC composites based on the eutectic system BaO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>

The low-temperature co-fired ceramic (LTCC) composites containing quartz based on the eutectic system BaO–Al₂O₃–SiO₂–B₂O₃ are fabricated at the sintering temperature below 980 °C. Preparation process and sintering mechanism were described and discussed, respectively. The results indicated that the addition of quartz to the eutectic system can availably improve dielectric properties of the LTCC composites. In addition, The LTCC composites with optimum compositions, which were obtained by the regulation of an Al₂O₃ content in the composite, can express excellent dielectric properties (permittivity: 5.94, 5.48; loss: 7 × 10⁻⁴, 5 × 10⁻⁴), considerable CTE values (11.7 ppm. °C⁻¹, 10.6 ppm. °C⁻¹) and good mechanical properties (128 MPa,133 MPa).     

Effect of refractory nitride nanoadditives on the properties of (Bi,Pb)<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>10+δ</Subscript>

We have investigated the interaction between (Bi,Pb)₂Sr₂Ca₂Cu₃O_10+δ (Bi-2223) and small additions (0.05–0.3 wt %) of nitride powders (TaN, AlN, HfN, NbN, Si₃N₄, TiN, and ZrN) with a particle size from 0.02 to above 0.5 μm and the effect of these nitrides on the microstructure, phase composition, distribution, and morphology of the resulting second-phase inclusions. The concentration and particle size of the nitrides and sintering conditions are shown to influence the superconducting transition temperature T _c, critical current density j _c, irreversible remanent magnetization, bulk density, and mechanical properties of the Bi-2223/nitride composites.     

Spectroscopic characterisation of local structure in Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses doped with gadolinium

Gadolinium doped bismuth borate glasses containing up to 30 mol% Y₂O₃ were prepared by fast melt quenching method. The effect of yttrium on the local order in 3B₂O₃ · Bi₂O₃ and B₂O₃ · Bi₂O₃ glass matrices, particularly on the bismuth sites, was investigated by infrared (IR) spectroscopy and electron paramagnetic resonance (EPR) of Gd³⁺ ions. The IR results show that the local structure is more ordered in the glass system with higher bismuth content and the progressive addition of yttrium increases the local disorder in both bismuth–borate glass matrices. The EPR results indicate that Gd³⁺ ions occupy both bismuth and yttrium sites and reflect the same structural disorder like that suggested by IR results.     

Effect of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on microstructure,electrical properties,and aging behavior of ZnO–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–MnO<Subscript>2</Subscript>–CoO varistor ceramics

The microstructure, electrical properties, and aging behavior of ZnO–V₂O₅–MnO₂–CoO–Dy₂O₃ varistor ceramics were investigated for different contents of Dy₂O₃. The microstructure consisted of ZnO grain as a main phase and secondary phases such as Zn₃(VO₄)₂, ZnV₂O₄, and DyVO₄. The average grain size increased from 7.6 to 10.1 μm and the sintered density slightly increased from 5.53 to 5.57 g/cm³ with the increase of Dy₂O₃ content. The varistor ceramics added with 0.05 mol% Dy₂O₃ exhibited the most nonlinear properties, with nonlinear coefficient of 30, and the highest stability against DC-accelerated aging stress. The Dy₂O₃ acted as an acceptor due to the decrease of donor density in the range of 2.73 × 10¹⁸/cm³ to 1.28 × 10¹⁸/cm³.     

Structural investigations of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–CaO glass system by FT-IR and EPR spectroscopies

xV₂O₅·(100 − x)[0.7P₂O₅·0.3CaO] glass system was obtained for 0 ≤ x ≤ 35 mol% V₂O₅. In order to obtain information regarding their structure, several techniques such as X-Ray diffraction, FT-IR, and EPR spectroscopies were used. X-Ray diffraction patterns of investigated samples are characteristic of vitreous solids. FT-IR spectra of 0.7P₂O₅·0.3CaO glass matrix and its deconvolution show the presence in the glass structure of all structural units characteristic to P₂O₅. Their number are increasing for x ≤ 3 mol% V₂O₅ then, for higher content of vanadium ions, the number of phosphate structural units are decreasing leading to a depolymerization of the structure. The structural units characteristic to V₂O₅ were not evidenced but their contribution to the glass structure can be clearly observed. EPR revealed a well resolved hyperfine structure (hfs) typical for vanadyl ions in a C_4v symmetry for x ≤ 3 mol% V₂O₅. For 5 < x < 20 mol% V₂O₅ the spectra show a superposition of two EPR signals one due to a hfs structure and another consisting of a broad line typical for associated V⁴⁺–V⁴⁺ ions. For x ≥ 20 mol% V₂O₅ only the broad line can be observed. The composition dependence of the line-width suggests the presence of dipole–dipole interaction between vanadium ions up to x ≤ 5 mol% V₂O₅ and superexchange interactions between vanadium ions for x > 5 mol% V₂O₅.     

System ZnO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>-CuO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>

Differential thermal analysis and x-ray diffraction data indicate that the ZnO B₂O₃-CuO B₂O₃ join of the ternary system CuO-B₂O₃-ZnO is pseudobinary, with eutectic phase relations and a liquid-liquid miscibility gap in the composition range 25–35 mol % CuO.Translated from Neorganicheskie Materialy, Vol. 41, No. 3, 2005, pp. 339–340.Original Russian Text Copyright © 2005 by Kasumova, Bananyarly.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

Effect of the ZrO<Subscript>2</Subscript> concentration on the crystallization behavior and the mechanical properties of high-strength MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass–ceramics

High-strength, colorless glass–ceramics in the MgO/Al₂O₃/SiO₂ system with high concentrations of ZrO₂ and a great potential for technical application, e.g., as high-performance hard disc substrates, are investigated. ZrO₂ concentrations from 6 to 9 mol% are added to a stoichiometric cordierite glass to investigate the influence of the concentration of the nucleating agent on the crystallization behavior and the mechanical properties. The phase formation and the microstructure of the glass–ceramics are studied using X-ray diffraction and scanning electron microscopy including electron backscatter diffraction. It is shown that the volume crystallization of ZrO₂, a low-/high-quartz solid solution (low-/high-QSS), and spinel is accompanied by the surface crystallization of indialite. This phase offers a much smaller coefficient of thermal expansion than the other crystal phases, which may induce high compressive stresses in the surface layer of the glass–ceramics after cooling and seems to result in excellent mechanical properties of the material. Biaxial flexural strengths of up to 1 GPa were measured. Higher ZrO₂ concentrations reduce the surface crystallization of indialite and decrease the mean size of the crystals resulting in a higher translucency. The volume-crystallizing phases and the mechanical properties of the glass–ceramics do not seem to be significantly affected by the analyzed ZrO₂ concentrations.     

Synthesis and properties of nanocrystalline 90 wt % ZrO<Subscript>2</Subscript>〈Y<Subscript>2</Subscript>O<Subscript>3</Subscript>, CeO<Subscript>2</Subscript>〉-10 wt % Al<Subscript>2</Subscript>O<Subscript>3</Subscript> powder

Using hydrothermal treatment of coprecipitated hydroxides, we have prepared nanocrystalline ZrO₂-rich ZrO₂-Y₂O₃-CeO₂-Al₂O₃ powder. The effect of heat treatment on the properties of the powder has been studied in the temperature range 400–1300°C. The powder has been shown to have a metastable phase composition, which is attributable to structural and size factors and also to the fact that the ZrO₂ and Al₂O₃ crystallites inhibit the growth of each other. Sintering the powder under various conditions, we have obtained ceramics with fracture toughnesses from 6.4 to 16.8 MPa m^1/2.     

Modification of the Magnetic Properties of α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Powders by Ultrasonic Processing

Hematite (α-Fe₂O₃) powders after ultrasonic treatment (UST) in the regime of cavitation in aqueous suspension and in that with an organic component (albumin protein) have been studied by Mössbauer spectroscopy and ferromagnetic resonance techniques. It is established that the UST in aqueous hematite suspensions with albumin results in the formation of a new magnetic phase with parameters coinciding with those of the α-Fe metallic phase.     

BaFe<Subscript>12</Subscript>O<Subscript>19</Subscript> films produced from BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> heterostructures

BaFe₁₂O₁₉ hexaferrite films have been produced on thermally oxidized single-crystal silicon (SiO₂/Si) substrates by sequential ion-beam sputtering of BaFe₂O₄ and α-Fe₂O₃ targets in an argon-oxygen atmosphere. Their crystal structure has been studied, and the origin of the impurity phases forming during heat treatment has been identified. The results show that heat treatment may lead to the formation of eutectic melts. As a result, the hexaferrite films may contain spherulites.