Enhanced electromagnetic wave absorption properties of polyaniline-coated Fe3O4/reduced graphene oxide nanocomposites

Fe₃O₄-reduced graphene oxide-polyaniline (Fe₃O₄–RGO–PANI) ternary electromagnetic wave absorbing materials were prepared by in situ polymerization of aniline monomer on the surface of Fe₃O₄–RGO nanocomposites. The morphology, structure and other physical properties of the nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, vibration sample magnetism, etc. The electromagnetic wave absorbing properties of composite materials were measured by using a vector network analyzer. The PANI–Fe₃O₄–RGO nanocomposites demonstrated that the maximum reflection loss was ?36.5 dB at 7.4 GHz with a thickness of 4.5 mm and the absorption bandwidth with the reflection loss below ?10 dB was up to 12.0 GHz with a thickness in the range of 2.5–5.0 mm, suggesting that the microwave absorption properties and the absorption bandwidth were greatly enhanced by coating with polyaniline (PANI). The strong absorption characteristics of PANI–Fe₃O₄–RGO ternary composites indicated their potential application as the electromagnetic wave absorbing material.     

Preparation and microwave absorption properties of BiFeO<Subscript>3</Subscript> and BiFeO<Subscript>3</Subscript>/PANI composites

BiFeO₃(BFO) particle was successfully synthesized by normal citric acid sol–gel method and the size of BiFeO₃ particle is about 200 nm. BiFeO₃/polyaniline (PANI) composites with the different weight ratio were synthesized by in situ emulsion polymerization. The citric acid doped PANI is fibrous and form a loose structure outside the BFO particle. With the increasing of PANI, the conductivity value of composites are increasing to 9.34?×?10^?2 S/cm. Moreover, the permittivity also enhance with the increasing of conductivity, which contribute to the improvement of dielectric loss. Microwave absorbing properties were investigated with a vector network analyzer in 1–18 GHz. The minimum reflection loss (RL) value is about ?40.2 dB at 8.3 GHz when the thickness is 3.5 mm, and the maximum bandwidth less than ?10 dB is 3.5 GHz (from 13.5 to 18 GHz) at the thickness of 2 mm. 3 mm millimeter-wave-attenuation properties were also tested, and the maximum attenuation value of BFO/PANI composites reach 15.71 dB. The composites can dissipate microwave energy into heat effectively by dielectric relaxation because of the suitable conductivity. The interface scattering and multiple reflections also play a important role because of the increasing of a loose structure. The BFO/PANI composite can be taken as a promising lightweight and multiband microwave absorber.     

Fabrication and microwave absorption performances of hollow-structure Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/PANI microspheres

The hollow polyaniline (PANI) microspheres were prepared by controlling the mass ratio of the aniline to polystyrene (PS) via a template method, and Fe₃O₄/PANI composite microspheres have been fabricated by blending the hollow PANI microspheres with Fe₃O₄ magnetic particles. The effects of the mass ratio of aniline/PS on the microwave absorption performances of Fe₃O₄/PANI microspheres were investigated. It was found that the value of minimum reflection loss (RL_min) of the microspheres were respectively ?14.06, ?22.34 and ?24.3 dB, corresponding to the mass ratio of aniline/PS of 1:1.5, 1:3, and 1:6. In addition, when the mass ratio of aniline/PS was 1:6, with the thickness of 1.5 and 2.0 mm, the bandwidth below ?10dB were respectively 2.48 GHz (15.52–18 GHz) and 4.64 GHz (11.04–15.68 GHz), indicating that the Fe₃O₄/PANI microspheres could be a potential electromagnetic wave absorbing material in X (8–12 GHz) and Ku (12–18 GHz) bands.     

Preparation and microwave absorption properties of polyaniline/Mn0.8Zn0.2Fe2O4 nanocomposite in 2–18 GHz

The polyaniline/Mn_0.8Zn_0.2Fe₂O₄(PANI/MZF) nanocomposite was prepared by an in situ polymerization method. The samples were characterized by Fourier transform infrared spectrometer, X-ray diffraction, scanning electron microscope and vibrating sample magnetometer. The complex permittivity and complex permeability for the nanocomposites were measured by wave-guide method with vector network analyzer in 2.0–18.0 GHz. The reflection losses (R _L ) of the nanocomposites were investigated according to the wave transmission theory. The results showed the maximum reflection loss of the PANI/MZF nanocomposite was about ?20.6 dB at 14.4 GHz with a bandwidth of 5.6 GHz. In conclusion, a wider absorption frequency range could be obtained by adding polyaniline contain in the MZF ferrite. The PANI/MZF nanocomposite is a good microwave shielding and absorbing materials at higher frequency.     

Electromagnetic and microwave absorbing properties of magnetite nanoparticles decorated carbon nanotubes/polyaniline multiphase heterostructures

Magnetite nanoparticles decorated CNTs/PANI multiphase heterostructures were prepared by polymerization of aniline monomer and an additional process of the coprecipitation of Fe²⁺ and Fe³⁺. Scanning electron microscopy and transmission electron microscopy observation indicated that the monodispersed magnetite nanoparticles were uniformly decorated on the surface of CNTs/PANI. The formation of magnetite nanoparticles on CNTs/PANI was mainly through a preferentially position-selective precipitation process. More interestingly, a portion of Fe₃O₄ nanoparticles was found to form core–shell structures with PANI. The effects of different additional amounts of NH₂Fe(SO₄)₂·6H₂O reactant on the magnetic properties and microwave absorbing performances of CNTs/PANI/Fe₃O₄ heterostructures were investigated. The CNTs/PANI/Fe₃O₄ multiphase heterostructures were proved to be superparamagnetic. The microwave absorption measurement showed that the CNTs/PANI/Fe₃O₄ samples under 1.5 g of NH₂Fe(SO₄)₂·6H₂O condition exhibited much more effective absorption performance. These results suggested the novel CNTs/PANI/Fe₃O₄ multiphase heterostructures with PANI as the second phase may be potential candidate for microwave absorption systems.     

Binder-free polyaniline interconnected metal hexacyanoferrates nanocomposites (Metal = Ni,Co) on carbon fibers for flexible supercapacitors

Improvement of the electrical conductivity, specific capacitance and binder-free polyaniline (PANI) interconnected with metal(II) hexacyanoferrate(III) (MHCF) nanocomposites (M?=?Ni, Co) on flexible carbon fibers (CF) were designed in our present research goal. PANI/MHCF/CF nanocomposites were prepared by one-step co-polymerization method. Electrochemical studies like cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy were analyzed. Under the optimized conditions, the nanocomposites demonstrated remarkable electrochemical performances as supercapacitor electrode with outstanding specific capacitances of ~725 F g^?1 at a current density of 1 A g^?1, and retained ~325 F g^?1 even at a high current density of 20 A g^?1 in 0.5 M H₂SO₄?+?0.5 M Na₂SO₄ solution. The excellent cycling stability with capacitance retention of 80% after 1000 cycles may be a potential electrode material for future supercapacitor when its cycling stability and rate performance are addressed.     

Facile synthesis and novel microwave electromagnetic properties of flower-like Ni structures by a solvothermal method

Flower-like Ni structures composed of leaf-like flakes were synthesized through a facile solvothermal approach independent of surfactants or magnetic force. The evolution of the morphology was closely related to the variation of NaOH and volume ratios of ethylene glycol to water. The microwave absorbing properties of the flower-like Ni wax-composite were evaluated based on the complex permittivity (ε_r = ε′ ? jε″) and permeability (µ_r = µ′ ? jµ″). The Ni wax-composite exhibited excellent microwave absorption performances with a minimum reflection loss of ?46.1 dB at 13.3 GHz, corresponding to a matching thickness of 2.0 mm. In particular, the absorption bandwidth of RL below ?10 dB was 3.6 GHz (11.7–15.3 GHz). The attenuation of microwave could be attributed to the dielectric loss and unique flower-like structure.     

Structural,dielectric, ac conductivity and electromagnetic shielding properties of polyaniline/Ni<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> composites

A conducting polymer, polyaniline (PANI)/Ni_0.5Zn_0.5Fe₂O₄ composites with high dielectric absorbing properties and electromagnetic shielding effectiveness at low frequencies were successfully synthesized through a simple in situ emulsion polymerization. PANI was doped with hydrochloric acid to improve its electrical properties and interactions with ferrite particles. PANI/Ni_0.5Zn_0.5Fe₂O₄ composites were characterized by X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and thermal gravimetric analysis. Frequency dependence of dielectric and ac conductivity (σ_ac) studies have been undertaken on the PANI/Ni_0.5Zn_0.5Fe₂O₄ composites in the frequency range 50 Hz–5 MHz. The electrical conduction mechanism in the PANI/Ni_0.5Zn_0.5Fe₂O₄ is found to be in accordance with the electron hopping model. Further, frequency dependence of electromagnetic interference (EMI) shielding effectiveness (SE) is studied. The EMI shielding effectiveness is found to decrease with an increase in the frequency. The maximum value 55.14 dB of SE at 50 Hz was obtained at room temperature for PANI/Ni_0.5Zn_0.5Fe₂O₄ composites in the 50 Hz–5 MHz frequency range. PANI/Ni_0.5Zn_0.5Fe₂O₄ composites were demonstrated as a promising functional material for the absorbing of electromagnetic waves at low frequencies because of a large amount of dipole polarizations in the polymer backbone and at the interfaces of the Ni–Zn ferrite particles and PANI matrix.     

Hierarchical structures based on Li<Subscript>0.35</Subscript>Zn<Subscript>0.3</Subscript>Fe<Subscript>2.35</Subscript>O<Subscript>4</Subscript>/polyaniline nanocomposites: synthesis and excellent microwave absorption properties

For the first time, the hierarchical structures of Li_0.35Zn_0.3Fe_2.35O₄(LZFO)/polyaniline nanocomposites were successfully synthesized by interfacial polymerization. Firstly, the LZFO particles were prepared by the sol–gel method, and subsequently the PANI nanorods, composed of nanoneedle-like PANI, were grafted on the surface of the LZFO. A novel microtopography, urchin-like, of LZFO/PANI was prepared by a simple, efficient and controllable two-step method. The crystal structure, chemical bonding states and morphology of samples were characterized by means of Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Scanning and Transmission electron microscopy (SEM/TEM). The bandwidth of reflection loss exceeds 10 dB in the frequency was 5.56 GHz (3.36–8.48, 10.32–10.76 GHz), and the maximum reflection loss can reach ??49.4 dB at 4.96 GHz with the thickness of 5.1 mm. The enhanced microwave absorption properties of LZFO/PANI nanocomposites are mainly ascribed to the multi-level structure and the improved impedance matching, and make it a potential candidate for microwave absorption materials.     

Effect of elevated annealing temperature on the morphology, microstructure, conductivity and microwave absorption properties of phthalocyanine polymer

An aromatic, diether-linked phthalocyanine resin (Pc) was prepared from 4,4′-bis (3,4-dicyanophenoxy) biphenyl (BPh) and investigated for morphology, microstructure, dielectric, conductivity and microwave absorption properties at different annealing temperatures from 300 to 800 °C. The results showed that the annealing temperature could significantly change the morphology and microstructure of the Pc polymer, leading to the generation of carbon-Pc polymer composites, and enhance the microwave absorbing and electrical properties of the Pc polymer. The dramatic electrical and dielectric transition happened when the annealing condition was 550 °C 24 h. The conductivity of the samples exhibited a transition of electrical behavior from an insulator to semiconductor of approximately 10⁺² S/cm. Pc polymer exhibited excellent microwave absorption properties in the frequency range of 0.5–18.0 GHz after sintering process. The microwave absorption of the annealing Pc polymer can be mainly attributed to the dielectric loss rather than magnetic loss. The sample annealed at 500 °C 24 h had two strong microwave absorbing peaks and achieved a maximum absorbing value of ?44 dB around 10.7 and 17.5 GHz when the thickness was 3.0 mm. The novel carbon-Pc polymer composites were believed to have potential applications in the microwave absorbing area.     

Facile synthesis and excellent electromagnetic wave absorption properties of flower-like porous RGO/PANI/Cu<Subscript>2</Subscript>O nanocomposites

Novel porous ternary nanocomposite systems containing reduced graphene oxide (RGO)/polyaniline (PANI)/cuprous oxide (Cu₂O) were prepared via one-step in situ redox method. The RGO/PANI/Cu₂O nanocomposites present a flower-like structure with an average size of 2.0 μm in diameter. The morphologies and properties of the products can be controlled by adjusting the molar ratios of aniline to Cu²⁺. When the molar ratio of aniline to Cu²⁺ is 1:1, the product exhibits excellent microwave absorption property in the frequency range of 2–18 GHz. It can be seen that the maximum reflection loss (RL) of the ternary composite is up to ?52.8 dB at 2.7 GHz with a thickness of only 2 mm, and the absorption bandwidth corresponding to ?10 dB (90% of EM wave absorption) is 13.2 GHz. The microwave absorption property of ternary RGO/PANI/Cu₂O composite is significantly improved due to its special flower-like porous structure, dielectric loss property and well impedance matching characteristics, which is 8.12 times than that of pure RGO and 5.28 times than that of pure PANI. Therefore, our study paves a new way to prepare the promising lightweight and high-performance composite materials combined with the characteristics of three components for electromagnetic absorption.     

In-situ intercalation polymerization synthesis and electromagnetic wave absorption property of graphene/PANI/CuO ternary composites

Based on in-situ intercalation polymerization of PANI, graphene/PANI/CuO ternary nanocomposites were synthesized by hydrothermal reaction at 160 °C followed by heat treatment at 280 °C. The morphology and electromagnetic wave absorption property of as-prepared products were investigated. Result shows that the physical exfoliation of graphite into graphene takes place mainly in the hydrothermal process. After hydrothermal reaction for 4 h, prolongation of the reaction time has no obvious effect on graphene exfoliation and the electromagnetic wave absorption of graphene/PANI/CuO. The synthesized graphene/PANI/CuO ternary nanocomposite is a promising candidate for electromagnetic wave absorbing. Double-layer absorbers using graphene/PANI/CuO as absorbing layer present excellent performances. Both effective absorption bandwidths of DB-1 and DB-2 exceed 10.0 GHz when the total thickness is only 3.0 mm. The maximum reflection loss for DB-1 is up to 39.4 dB at 16.1 GHz and that for DB-2 is???47.3 dB at 11.0 GHz.

     

钩针工艺之于活性碳纤维/环氧树脂电路屏吸波复合材料的设计

通过钩针工艺将活性碳纤维(ACF)和玻璃纤维(GF)混编,提高了频率选择性表面(FSS)的可设计性和复杂性,制备了ACF钩针结构单元电路屏碳纤维/环氧树脂(ACF/EP)复合材料。研究了不同编织结构和ACF质量分数对复合材料吸波性能的影响。结果表明:ACF质量分数为100%的4针枣形FSS的ACF/EP复合材料和质量分数为50%的16针枣形FSS复合材料的最大反射损耗(RL)可以达到-50dB以上,有效吸收带宽(RL-10dB)达10GHz以上。复杂的钩针设计使ACF/EP复合材料的多孔结构增多,有效吸收带宽变宽,4针枣形结构具有较多不规整孔径使吸波效果显著。适量的ACF质量分数结合编织结构有利于获得理想的CF/EP吸波复合材料。     

Preparation of TiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/CF composites for enhanced microwave absorbing performance

To meet the demand of electromagnetic absorption, cheap and easily available microwave absorbents are urgently required. As an important functional material, carbon fibers (CFs) have been widely reported, however, too high conductivity easily leads to the impedance mismatch, which is not favorable to the microwave absorbing performance (MAP). To address this challenge, in this study, novel TiO₂/Fe₃O₄/CF composites with tunable magnetic were synthesized by hydrothermal method and characterized by SEM, XRD, XPS and VSM. As absorbents, the minimum reflection loss (R_L) value is ??41.52 dB at a thickness of 2.1 mm, and the corresponding bandwidth with effective attenuation (R_L?<???10 dB) is up to 5.65 GHz (4.54–10.19 GHz). More importantly, the plausible mechanisms for the enhanced MAP are explored.     

Synthesis and microwave absorption property of ternary composites: polyaniline/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/Ba<Subscript>3</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>24</Subscript>O<Subscript>41</Subscript>

Polyaniline (PANI)/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite was prepared by an in-situ polymerization method. The phase structure, morphology and magnetic properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite were characterized by XRD, FT-IR, SEM, TEM, and VSM, respectively. The microwave absorption properties of the composite were investigated by using a vector network analyzer in the 2–18 GHz frequency range. The results show that the maximum reflection loss value of the PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite reaches ?30.5 dB at 10.5 GHz with a thickness of 3 mm and the bandwidth of reflection loss below ?10 dB reaches up to 1.2 GHz. The excellent microwave absorption properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite due to the enhanced impedance match between dielectric loss and magnetic loss.     

The characterization and preparation of core–shell structure particles of carbon-sphere@NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript>@PPy as microwave absorbing materials in X band

An excellent PPy/NiFe₂O₄/CS microwave absorbing materials with a three-layer core–shell structure, was synthesized successfully by two reaction steps of solvothermal reaction and in situ polymerization. The surface morphology, phase structure and chemical components of the composite have been characterized by a scanning electron microscope, X-ray diffraction and X-ray photoelectron spectroscope. The results suggest that the surface of CS is covered by NiFe₂O₄ completely and PPy wraps the obtained NiFe₂O₄/CS successfully. The conductivity and the saturation magnetization (Ms) of the resulting PPy/NiFe₂O₄/CS composites are 0.38 S/cm and 46 emu/g, respectively. The vector network analysis shows the composite performs better microwave absorbing ability than that of CS and NiFe₂O₄/CS. The maximum reflection loss of the composite with 1.97 mm coating thickness is ?53 dB at 10.5 GHz and the bandwidth of reflection loss less than ?10 dB is 3.4 GHz (8.9–12.3 GHz). This ternary composite with light weight, thin thickness and strong absorbing capacity can be an attractive candidate in the field of microwave absorption.     

Microwave absorption properties of FSS-impacted composites as a broadband microwave absorber

The development of a cost-effective microwave absorber with wide bandwidth corresponding to reflection loss (RL)?≤??10 dB is still a very challenging task. A sugarcane bagasse-based agricultural waste composite has been analyzed for its elemental contents. The combination of elements is suitable for its possible usage as a cost-effective microwave absorbing material. Therefore, this composite has been subjected to morphological and electromagnetic studies to analyze its microwave absorbing behavior. The frequency dependent complex dielectric permittivity and complex magnetic permeability values were obtained using a transmission/reflection waveguide approach in the X-band. Furthermore, the effect of the Minkowski loop frequency selective surface (FSS) was studied over the absorption capability of the composite. It was found that the application of FSS leads to a reduction in thickness up to 2.9 mm and an enhancement in absorption bandwidth up to 3.6 GHz. The FSS patterned composite shows a remarkable performance with peak RL of ?28.4 dB at 10.7 GHz and absorption bandwidth of 3.6 GHz.     

Microwave absorption properties of double-layer absorbers based on spindle magnetite nanoparticles and flower-like copper sulfide microspheres

In this work, the spindle magnetite nanoparticles (SMNPs) and flower-like copper sulfide microspheres (FCSMSs) were synthesized via hydrothermal method. The structures, chemical composition and morphologies of samples were analyzed and characterized in detail. The microwave absorption properties of single-layer and double-layer absorbers were investigated based on the electromagnetic transmission line theory in the frequency range from 2 to 18 GHz. The results show that the double-layer absorbers consisting of FCSMSs as matching layer and SMNPs as absorbing layer display superior microwave absorbing performance compared to the single-layer ones due to the proper combination of magnetic loss of SMNPs and dielectric loss of FCSMSs, and the improved impedance matching characteristics. When the thicknesses of the absorbing layer and the matching layer are 1.6 and 0.4 mm, respectively, the minimum reflection loss reaches ??74.3 dB at 10.9 GHz, and the efficient absorption bandwidth is up to 5.34 GHz (8.46–13.8 GHz). The optimal SMNPs/FCSMSs double-layer absorbers can become a novel microwave absorption material with strong-absorption and broad-band.     

Enhanced thermoelectric properties in polyaniline composites with polyaniline-coated carbon nanotubes

Polyaniline (PANI)-coated multi-walled carbon nanotubes (PANI-CNTs) were firstly synthesized by in situ polymerization and then incorporated into the PANI matrix by hot pressing to fabricate bulk PANI-CNT/PANI composites. The composites showed homogeneously dispersed CNTs into the PANI matrix with a strong interface interaction. Thermoelectric measurements at room temperature showed a significant enhancement in both the electrical conductivity and Seebeck coefficient with the addition of PANI-CNTs. At the same time, relatively low thermal conductivity was also obtained. The maximum electrical conductivity and Seebeck coefficient of the composites were up to 2.8 × 10³ S/m and 21.6 μ/K, respectively, and the maximum figure of merit reached 1.0 × 10^?3 more than three orders of magnitude higher than that of neat PANI. This study proposed a novel and effective way to fabricate bulk PANI/CNT composites with enhanced thermoelectric properties.     

Time-sensitivity for the preparation and microwave absorption properties of core–shell structured Ni/TiO<Subscript>2</Subscript> composite microspheres

Core–shell Ni/TiO₂ composite microspheres with different crystallinity have been prepared at various reaction times by the solvothermal method. The crystal structure and morphology of the products were investigated by X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy. The microwave absorption properties of the core–shell Ni/TiO₂ composites were investigated at 1.0–18.0 GHz. The results show that the morphology and microwave absorption performances of Ni/TiO₂ composites were largely influenced by the crystallinity of TiO₂ shells. The crystallinity of anatase TiO₂ can be increased with increasing reaction time. Minimum peaks of Ni/TiO₂ composites shift to the high frequency with increasing the crystallinity of anatase TiO₂, which are due to high thermal conductivity of high crystallinity of TiO₂. The Ni/TiO₂ prepared at 36 h exhibits the best microwave absorption properties with minimum reflection loss of ?16.9 dB at 14.1 GHz.