The key aroma compounds and sensory characteristics of commercial Cheddar cheeses

To study the key aroma components and flavor profile differences of Cheddar cheese with different maturity and from different countries, the flavor components of 25 imported commercial Cheddar cheese samples in the China market were determined by gas chromatography-mass spectrometry. The quality and quantity of 40 flavor compounds were analyzed by gas chromatography-olfactometry among 71 aroma compounds determined by gas chromatography-mass spectrometry. Combined with odor activity value calculation, principal component analysis (PCA) was conducted to analyze the relationship among 26 flavor compounds with odor activity values >1 and the maturity of Cheddar cheese. The PCA results showed significant differences between the group of mild Cheddar cheese and the groups of medium Cheddar cheese and mature Cheddar cheese, and no significant differences were observed between medium Cheddar cheese and mature Cheddar cheese. According to the results of PCA and consumers' preference test, representative Cheddar cheese samples with different ripening times were selected for the flavor profile analysis. Partial least squares regression analysis was conducted to obtain the relationship between sensory properties and flavor compounds of different Cheddar cheeses. Based on partial least squares regression analysis, 1-octen-3-one, hexanal, acetic acid, 3-methylindole, and acetoin were positively correlated with milky, sour, and yogurt of mild Cheddar cheese. Dimethyl trisulfide, phenylacetaldehyde, ethyl caproate, octanoic acid, and furaneol and other compounds were positively correlated with fruity, caramel, rancid, and nutty notes of the medium and mature Cheddar cheeses.     

Effect of microencapsulated ferrous sulfate particle size on Cheddar cheese composition and quality

Iron-fortified Cheddar cheese was manufactured with large microencapsulated ferrous sulfate (LMFS; 700–1,000 µm in diameter) or small microencapsulated ferrous sulfate (SMFS; 220–422 µm in diameter). Cheeses were aged 90 d. Compositional, chemical, and sensory characteristics were compared with control cheeses, which had no ferrous sulfate added. Compositional analysis included fat, protein, ash, moisture, as well as divalent cations iron, calcium, magnesium, and zinc. Thiobarbituric acid reactive species assay was conducted to determine lipid oxidation. A consumer panel consisting of 101 participants evaluated the cheeses for flavor, texture, appearance, and overall acceptability using a 9-point hedonic scale. Results showed 66.0% iron recovery for LMFS and 91.0% iron recovery for SMFS. Iron content was significantly increased from 0.030 mg of Fe/g in control cheeses to 0.134 mg of Fe/g of cheese for LMFS and 0.174 mg of Fe/g of cheese for SMFS. Fat, protein, ash, moisture, magnesium, zinc, and calcium contents were not significantly different when comparing iron-fortified cheeses with the control. Iron fortification did not increase lipid oxidation; however, iron fortification negatively affected Cheddar cheese sensory attributes, particularly the LMFS fortified cheese. Microencapsulation of ferrous sulfate failed to mask iron's distinct taste, color, and odor. Overall, SMFS showed better results compared with LMFS for iron retention and sensory evaluation in Cheddar cheese. Results of this study show that size of the microencapsulated particle is important in the retention of the iron in the cheese and its sensory attributes. This study provides new information on the importance of particle size with microencapsulated nutrients.     

Fat Mimetics in Low-Fat Cheddar Cheese

Cheeses with 60% reduced fat content were prepared with three commercial fat mimetics. Low-fat cheeses without added fat mimetics and full-fat cheeses were prepared as controls. Cheeses were aged 3 months prior to sensory and instrumental evaluation. A low-fat cheese containing one of the fat mimetics received the highest texture scores from dairy judges and consumer panelists (P≤0.05). The low-fat control and another cheese with a fat mimetic received higher flavor scores from the trained dairy judges and consumer panelists than the other cheeses containing fat mimetics (P≤0.05). Low-fat cheeses containing fat mimetics were less rubbery than the low-fat control cheese (P≤0.05).     

Impact of fat reduction on flavor and flavor chemistry of Cheddar cheeses

A current industry goal is to produce a 75 to 80% fat-reduced Cheddar cheese that is tasty and appealing to consumers. Despite previous studies on reduced-fat cheese, information is critically lacking in understanding the flavor and flavor chemistry of reduced-fat and nonfat Cheddar cheeses and how it differs from its full-fat counterpart. The objective of this study was to document and compare flavor development in cheeses with different fat contents so as to quantitatively characterize how flavor and flavor development in Cheddar cheese are altered with fat reduction. Cheddar cheeses with 50% reduced-fat cheese (RFC) and low-fat cheese containing 6% fat (LFC) along with 2 full-fat cheeses (FFC) were manufactured in duplicate. Cheeses were ripened at 8°C and samples were taken following 2 wk and 3, 6, and 9 mo for sensory and instrumental volatile analyses. A trained sensory panel (n = 10 panelists) documented flavor attributes of cheeses. Volatile compounds were extracted by solid-phase microextraction or solvent-assisted flavor evaporation followed by separation and identification using gas chromatography-mass spectrometry and gas chromatography-olfactometry. Selected compounds were quantified using external standard curves. Sensory properties of cheeses were distinct initially but more differences were documented as cheeses aged. By 9 mo, LFC and RFC displayed distinct burnt/rosy flavors that were not present in FFC. Sulfur flavor was also lower in LFC compared with other cheeses. Forty aroma-active compounds were characterized in the cheeses by headspace or solvent extraction followed by gas chromatography-olfactometry. Compounds were largely not distinct between the cheeses at each time point, but concentration differences were evident. Higher concentrations of furanones (furaneol, homofuraneol, sotolon), phenylethanal, 1-octen-3-one, and free fatty acids, and lower concentrations of lactones were present in LFC compared with FFC after 9 mo of ripening. These results confirm that flavor differences documented between full-fat and reduced-fat cheeses are not due solely to differences in matrix and flavor release but also to distinct differences in ripening biochemistry, which leads to an imbalance of many flavor-contributing compounds.     

Consumer perceptions of anticake agents on shredded Cheddar cheese

Prepackaged natural cheese shreds are a growing consumer category. Anticake agents are applied to commercial cheese shreds to assist with shelf life and ease of use. The objective of this study was to investigate consumer perception of 3 anticake agents applied at various levels to Cheddar cheese shreds. Three common anticake agents (80% potato starch/20% cellulose blend, 100% potato starch, or potato starch/corn starch/calcium sulfate blend) were applied to duplicate lots of Cheddar cheese shreds at 1, 2, 3, 4, and 5% (wt/wt). Control Cheddar cheese shreds with no anticake were also included. Sensory properties (appearance, flavor, texture, and hot texture) were documented using a trained sensory panel (n = 8), and 3 consumer acceptance tests were also conducted. In test 1, consumers (n = 110) visually evaluated liking of cold shred appearance. In test 2, consumers (n = 100) evaluated melted shreds on a flour tortilla for overall liking and appearance, flavor, and texture liking. In test 3, consumers (n = 49) participated in a home usage test. Two-way ANOVA (anticake × anticake application rate) was used to interpret the collected data from each test. Visual appearance of shreds was the primary attribute influenced by anticake application and anticake agent. Trained panel evaluation demonstrated that the 100% potato starch anticake had minimal effects on visual appearance. The other 2 agents (80% potato starch/20% cellulose blend and potato starch/corn starch/calcium sulfate blend) showed increases in visible powder at >3% (wt/wt). Consistent with results from trained panelists, higher application rates decreased consumer appearance and color liking for Cheddar shreds with 80% potato starch/20% cellulose and potato starch/corn starch/calcium sulfate blends at >2 or 3% (wt/wt), respectively. Appearance liking of melted shreds decreased with increased anticake application percent but decreased the most for 100% potato starch anticake at greater than 1% (wt/wt) application. Overall liking, flavor liking, and texture liking attributes for melted shreds were negatively affected at >3% (wt/wt) application regardless of anticake agent used. In general, anticake agents can be applied to Cheddar cheese shreds at up to 3% (wt/wt) with minimal effect on consumer perception.     

The effect of starter culture and annatto on the flavor and functionality of whey protein concentrate

The flavor of whey protein can carry over into ingredient applications and negatively influence consumer acceptance. Understanding sources of flavors in whey protein is crucial to minimize flavor. The objective of this study was to evaluate the effect of annatto color and starter culture on the flavor and functionality of whey protein concentrate (WPC). Cheddar cheese whey with and without annatto (15 mL of annatto/454 kg of milk, annatto with 3% wt/vol norbixin content) was manufactured using a mesophilic lactic starter culture or by addition of lactic acid and rennet (rennet set). Pasteurized fat-separated whey was then ultrafiltered and spray dried into WPC. The experiment was replicated 4 times. Flavor of liquid wheys and WPC were evaluated by sensory and instrumental volatile analyses. In addition to flavor evaluations on WPC, color analysis (Hunter Lab and norbixin extraction) and functionality tests (solubility and heat stability) also were performed. Both main effects (annatto, starter) and interactions were investigated. No differences in sensory properties or functionality were observed among WPC. Lipid oxidation compounds were higher in WPC manufactured from whey with starter culture compared with WPC from rennet-set whey. The WPC with annatto had higher concentrations of p-xylene, diacetyl, pentanal, and decanal compared with WPC without annatto. Interactions were observed between starter and annatto for hexanal, suggesting that annatto may have an antioxidant effect when present in whey made with starter culture. Results suggest that annatto has a no effect on whey protein flavor, but that the starter culture has a large influence on the oxidative stability of whey.     

Comparison of differences between lexicons for descriptive analysis of Cheddar cheese flavour in Ireland,New Zealand,and the United States of America

Flavour lexicons for cheese provide a way to document cheese flavour for both research and marketing. The objective of this study was to compare differences and similarities in three independently developed sensory languages for Cheddar cheese flavour at three different locations (Ireland, New Zealand, United States of America) using an international selection of Cheddar cheeses. Twelve Cheddar cheeses (four from each country) were evaluated by the three panels using the respective sensory languages. Sensory space patterns obtained by principal component analysis were consistent between the three sites indicating that the overall differentiation of the cheeses by each panel was similar. The key flavour characteristics among the cheeses were described by different attributes. Cheeses were grouped by each site by country of origin suggesting international differences in Cheddar cheese flavour. Cross-cultural differences can exist in sensory language and perception, but highly trained panels using standardized, representative languages can provide comparable results.     

TEXTURE ANALYSIS OF CHEDDAR CHEESE MADE FROM ULTRAFILTERED MILK

The textural properties of Cheddar cheese made from ultrafiltered milk were assessed. Cheddar cheeses were prepared from 1.5- and 2.0-fold concentrated milk and ripened for three months. Textural characteristics of the UF cheeses were compared to control and commercial Cheddar cheeses by sensory and instrumental measures. The texture of cheese made from UF milk differed from the control commercial Cheddar cheeses. According to the trained sensory panel, the UF cheeses were harder and more rubbery, crumbly, chewy and grainy than the control and commercial Cheddar cheeses (P <0.01). The texture profile analysis (TPA), conducted using the Instron, did not correspond to the sensory measurements nor was it successful in discriminating among the cheese samples. Lack of agreement between the sensory and instrumental tests was attributed to differences in the testing conditions and procedures of the two methods. Instrumental tests should be validated against sensory measures in order to be useful as measures of palatability. Consumer preferences for the commercial, control and UF Cheddar cheeses were significantly different (P < 0.01), the UF cheeses being less preferred in terms of flavor, texture and overall acceptability.     

Effect of zinc fortification on Cheddar cheese quality

Zinc-fortified Cheddar cheese containing 228 mg of zinc/kg of cheese was manufactured from milk that had 16 mg/kg food-grade zinc sulfate added. Cheeses were aged for 2 mo. Culture activity during cheese making and ripening, and compositional, chemical, texture, and sensory characteristics were compared with control cheese with no zinc sulfate added to the cheese milk. Compositional analysis included fat, protein, ash, moisture, zinc, and calcium determinations. The thiobarbituric acid (TBA) assay was conducted to determine lipid oxidation during aging. Texture was analyzed by a texture analyzer. An untrained consumer panel of 60 subjects evaluated the cheeses for hardness, off-flavors, appearance, and overall preference using a 9-point hedonic scale. Almost 100% of the zinc added to cheese milk was recovered in the zinc-fortified cheese. Zinc-fortified Cheddar cheese had 5 times more zinc compared with control cheese. Zinc-fortified cheese had higher protein and slightly higher fat and ash contents, whereas moisture was similar for both cheeses. Zinc fortification did not affect culture activity during cheese making or during the 2-mo aging period. The TBA value of control cheese was higher than that of zinc-fortified cheese at the end of ripening. Although zinc-fortified cheese was harder as determined by the texture analyzer, the untrained consumer panel did not detect differences in the sensory attributes and overall quality of the cheeses. Fortification of 16 mg/kg zinc sulfate in cheese milk is a suitable approach to fortifying Cheddar cheese without changing the quality of Cheddar cheese.     

Short communication: Norbixin and bixin partitioning in Cheddar cheese and whey

The Cheddar cheese colorant annatto is present in whey and must be removed by bleaching. Chemical bleaching negatively affects the flavor of dried whey ingredients, which has established a need for a better understanding of the primary colorant in annatto, norbixin, along with cheese color alternatives. The objective of this study was to determine norbixin partitioning in cheese and whey from full-fat and fat-free Cheddar cheese and to determine the viability of bixin, the nonpolar form of norbixin, as an alternative Cheddar cheese colorant. Full-fat and fat-free Cheddar cheeses and wheys were manufactured from colored pasteurized milk. Three norbixin (4% wt/vol) levels (7.5, 15, and 30 mL of annatto/454 kg of milk) were used for full-fat Cheddar cheese manufacture, and 1 norbixin level was evaluated in fat-free Cheddar cheese (15 mL of annatto/454 kg of milk). For bixin incorporation, pasteurized whole milk was cooled to 55°C, and then 60 mL of bixin/454 kg of milk (3.8% wt/vol bixin) was added and the milk homogenized (single stage, 8 MPa). Milk with no colorant and milk with norbixin at 15 mL/454 kg of milk were processed analogously as controls. No difference was found between the norbixin partition levels of full-fat and fat-free cheese and whey (cheese mean: 79%, whey: 11.2%). In contrast to norbixin recovery (9.3% in whey, 80% in cheese), 1.3% of added bixin to cheese milk was recovered in the homogenized, unseparated cheese whey, concurrent with higher recoveries of bixin in cheese (94.5%). These results indicate that fat content has no effect on norbixin binding or entrapment in Cheddar cheese and that bixin may be a viable alternative colorant to norbixin in the dairy industry.