Preparation,characterization, electrical and antibacterial properties of sericin/poly(vinyl alcohol)/poly(vinyl pyrrolidone) composites

In this study, we focused on the fabrication of poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP)/sericin composites via a simple solution‐blending method. The composites were characterized by Fourier transform infrared (FTIR) spectroscopy, UV spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry, thermogravimetric analysis (TGA), and measurements of the conductivity, tensile strength, and antibacterial activity against Staphylococcus aureus. The results of FTIR and UV spectroscopy implied the occurrence of hydrogen bonding between sericin and the PVA/PVP blend. The structure and morphology, studied by XRD and SEM, revealed that the sericin particles were well dispersed and arranged in an orderly fashion in the blend. The glass‐transition temperature (T_g) of the composite was higher than that of the pure blend, and the T_g value shifted toward higher temperatures when the volume fraction of sericin increased. TGA indicated that sericin retarded the thermal degradation; this depended on the filler concentration. The mechanical and electrical properties, such as the tensile strength, alternating‐current electrical conductivity, dielectric constant, and dielectric loss of the composites, were higher than those of the pure blend, and these properties were enhanced when the concentration of sericin was increased up to 10 wt % filler content, whereas the elongation at break of the composite decreased with the addition of sericin particles. The antibacterial properties of the composite showed that sericin had a significant inhibitory effect against S. aureus. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43535.     

Preparation and characterization of chitosan/poly(vinyl alcohol) blend fibers

Chitosan and poly(vinyl alcohol) blend fibers were prepared by spinning their solution through a viscose‐type spinneret at 25°C into a coagulating bath containing aqueous NaOH and ethanol. The influence of coagulation solution composition on the spinning performance was discussed, and the intermolecular interactions of blend fibers were studied by infrared analysis (IR), X‐ray diffraction (XRD), and scanning electron micrograph (SEM) and by measurements of mechanical properties and water‐retention properties. The results demonstrated that the water‐retention properties and mechanical properties of the blend fibers increase due to the presence of PVA in the chitosan substract, and the mechanical strength of the blends is also related to PVA content and the degree of deacetylation of chitosan. The best mechanical strength values of the blend fibers, 1.82 cN/d (dry state) and 0.81 cN/d (wet state), were obtained when PVA content was 20 wt % and the degree of deacetylation of chitosan was 90.2%. The strength of the blend fibers, especially wet tenacity could be improved further by crosslinking with glutaraldehyde. The water‐retention values (WRV) of the blend fibers were between 170 and 241%, obviously higher than pure chitosan fiber (120%). The structure analysis indicated that there are strong interaction and good miscibility between chitosan and poly(vinyl alcohol) molecular resulted from intermolecular hydrogen bonds. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2558–2565, 2001     

Preparation and characterization of a bioadhesive with poly (vinyl alcohol) crosslinking agent

Synthetic adhesives containing 3,4‐dihydroxy‐L‐phenylalanine and its derivatives have strong adhesion strength and good biocompatibility, which make them prime candidates for adhesives or bioadhesives applications. In this study, a new photocurable poly (vinyl alcohol) (UV‐PVA) derivative was prepared and used as crosslinking agent to further improve adhesion strength of dopamine methacrylamide (DMA) system. The structure of UV‐PVA was confirmed, and the degree of acryloyl group substitution (DS) was easily varied from 10 to 40% by varying the molar ratio of acryloyl chloride to ? OH of PVA. The effects of ultraviolet light intensity, content of DMA and DS values of PVA on the photopolymerization kinetics were studied, and the effects of DS value on the adhesive strength, swelling performance and cell attachment were also investigated. It was found that adhesive containing UV‐PVA with 40% DS value yielded the highest adhesive strength, a relatively low swelling ratio and good biocompatibility. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of graphene/poly(vinyl alcohol) nanocomposites

Graphene (GE)‐based nanocomposites are emerging as a new class of materials that hold promise for many applications. In this article, we present a general approach for the preparation of GE/poly(vinyl alcohol) (PVA) nanocomposites. The basic strategy involved the preparation of graphite oxide from graphite, complete exfoliation of graphite oxide into graphene oxide sheets, followed by reduction to GE nanosheets, and finally, the preparation of the GE/PVA nanocomposites by a simple solution‐mixing method. The synthesized products were characterized by X‐ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetry, and differential scanning calorimetry analysis. The GE nanosheets were well dispersed in the PVA matrix, and the restacking of the GE sheets was effectively prevented. Because of the strong interfacial interaction between PVA and GE, which mainly resulted from the hydrogen‐bond interaction, together with the improvement in the PVA crystallinity, the mechanical properties and thermal stability of the nanocomposites were obviously improved. The tensile strength was increased from 23 MPa for PVA to 49.5 MPa for the nanocomposite with a 3.25 wt % GE loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of boric acid treatment method on the characteristics of poly(vinyl alcohol)/iodine polarizing film

Four types of polyvinyl alcohol (PVA)/iodine complex films were made using different boric acid treatments to prepare polarizing films having high durability under humid and warm atmospheres and to identify the effects of the boric acid treatment method on the formation of the PVA/iodine polarizing film. The four types of films were a PVA iodinated film(I), a PVA film that was iodinated and then treated with boric acid(I‐B), a PVA film that was treated with boric acid and then iodinated(B‐I), and a PVA film that was simultaneously treated with iodine and boric acid(I+B). The concentrations of I₂/KI were 0.03, 0.05, and 0.07 mol/L, and the concentrations of boric acid were 0.1, 0.3, and 0.5 mol/L. Comparing four type films treated with 0.05 mol/L I₂/KI and 0.5 mol/L boric acid, the conformation of PVA/iodine complexes for I‐B film were larger than the others. The degrees of polarization (ρ) of all of the films increased to very high levels (99.9%↑). The durability of I‐B was superior to B‐I or I+B, and the change in the ρ was below 5% because the boric acid treated after iodine treatment reduced the molecular mobility of the PVA/iodine complex chains through intracrosslinking, so that the PVA/iodine complex could not easily collapse. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of poly(vinyl alcohol)‐poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications

Aqueous solutions of poly(vinyl alcohol) and poly(vinyl pyrrolidone) are blended and films are produced by casting method with the further intention of being used as bio‐materials with latent medical application. Glutaraldehyde, 4,4′‐diazido‐2,2′‐stilbenedisulfonic acid disodium salt tetra‐hydrate are used as crosslinker agents, whereas lactic acid is the plasticizer in the blend. The obtained films are characterized by differential scanning calorimetry (DSC), mechanical properties, swelling and solubility behavior. DSC measurements show that the blends exhibit a single glass transition temperature indicating that they are miscible, even in the presence of the plasticizer and crosslinker agents. By the combination of all mentioned additives, a relevant enhancement of the swelling is observed, accompanied by a stabilization of the solubility during the tested time. Finally, mechanical properties show an appropriate performance in the studied parameters. As a consequence, the obtained films could be suitable for use as medium or long‐term implants. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of boric acid and heat treatment for the formation of poly(vinyl alcohol)/iodine complex films iodinated at solution before casting

This study examined the role of boric acid and the effect of heat treatment on PVA‐iodine polarizing films prepared in the solution state before casting (IBC) of PVA/iodine/boric acid films. The films were prepared by casting aqueous solutions of 10 wt % poly(vinyl alcohol) (PVA) containing boric acid with 0, 0.1, 0.3, and 0.5 mol/l of I₂/KI aqueous solution, and I₂/KI(1 : 2) with 5 wt % of PVA. The effect of boric acid and heat treatment on the durability of the IBC PVA polarizing sheet films was investigated by UV–vis absorption spectroscopy. Boric acid was found to be essential for the complex formation in PVA/iodine solutions at relatively low I₂/KI concentrations and high temperatures. The strength of the complex peak at ∼ 600 nm in UV–vis absorption spectra increased with increasing boric acid concentration. With increasing heating temperature over 90°C the intensity of the peak at 600 nm corresponding to the complex decreased due to the evaporation of I₂ decomposed from I₅⁻, but the peak at 355 nm corresponding to free I₂·I₃⁻ was remained unchanged. From heat treatment at 150°C, the intensity of the peak at 600 nm decreased but the intensity of the complex peak (600 nm) of the sample with 0.5 mol/l boric acid was unaffected. The transmittance and degree of polarization for the films increased and decreased with increasing heat treatment time under heat and a humid atmosphere, respectively. However, this tendency decreased with increasing boric acid concentration and heat treatment. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of poly(vinyl alcohol) biocomposites with microalgae ash

Gasification of microalgae feedstock generates mineral ash. In this work, raw ash is produced from lipid‐extracted algal biomass of the Nannochloropsis salina strain. Prior to using it as filler for composite fabrication with poly(vinyl alcohol), raw ash (RASH) is activated with NaOH and surface modified with (3‐aminopropyl)triethoxysilane. Surface modification of activated ash (PASH) significantly improves interfacial interaction between surface‐modified ash (GASH) and polymer matrix. Higher ultimate tensile strength of PVA/GASH composites is recorded, compared with PVA/RASH and PVA/PASH. Young's modulus of biocomposites appears to increase proportionally to loading of the fillers. Thermal properties of polymeric materials of PVA with these ashes are stable. This is the first report to demonstrate the utilization of microalgal ash, the leftover after completed gasification of algal biomass, as an efficient filler for production of value‐added polymeric materials. It is proposed that microalgal ash is capable of improving the economic feasibility of microalgae‐based biorefinery. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43599.     

Effect of CsBr–MnCl2 mixed fillers on the crystal structure and optical and electrical properties of poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) films filled with (x)CsBr(15 ? x)MnCl₂, where 0.0 ≤ x ≤ 15%, were prepared by a casting technique. The crystal structure properties of the prepared films were examined by XRD, DTA, and FTIR. A correlation between XRD, DTA, and FTIR of the filled polymer was discussed. Optical absorption measurements revealed two optical band gaps (E_g1 and E_g2). The electrical properties were studied using dc electrical conductivity. The filling level (FL) dependency of E_g1 and E_g2, thermal activation energy (ΔE), and hopping distance (R₀) are given to illustrate the behavior of the filled polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2178–2186, 2004     

Preparation and characterization of poly(vinyl alcohol) nanocomposites made from cellulose nanofibers

A method using a combination of ball milling, acid hydrolysis, and ultrasound was developed to obtain a high yield of cellulose nanofibers from flax fibers and microcrystalline cellulose (MCC). Poly(vinyl alcohol) (PVA) nanocomposites were prepared with these additives by a solution‐casting technique. The cellulose nanofibers and nanocomposite films that were produced were characterized with Fourier transform infrared spectrometry, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. Nanofibers derived from MCC were on average approximately 8 nm in diameter and 111 nm in length. The diameter of the cellulose nanofibers produced from flax fibers was approximately 9 nm, and the length was 141 nm. A significant enhancement of the thermal and mechanical properties was achieved with a small addition of cellulose nanofibers to the polymer matrix. Interestingly, the flax nanofibers had the same reinforcing effects as MCC nanofibers in the matrix. Dynamic mechanical analysis results indicated that the use of cellulose nanofibers (acid hydrolysis) induced a mechanical percolation phenomenon leading to outstanding and unusual mechanical properties through the formation of a rigid filler network in the PVA matrix. X‐ray diffraction showed that there was no significant change in the crystallinity of the PVA matrix with the incorporation of cellulose nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Antibacterial Ag containing core-shell polyvinyl alcohol-poly (lactic acid) nanofibers for biomedical applications

Core-shell-structured polyvinyl alcohol (PVA)-poly (lactic acid) (PLA) nanofibers combining the hydrophilic trait of PVA and the biocompatibility of PLA were produced using coaxial electrospinning. This allowed the incorporation of AgNO₃ in the PVA core of the distinct fibers as shown through transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) showed relatively uniform and bead-free fibers with smooth surfaces. Ag-containing fibers show significantly decreased diameters compared with Ag-free samples as a result of the increased conductivity of the spinning solutions with increasing amounts of AgNO₃. In a postsynthetic treatment, the AgNO₃ was reduced forming silver nanoparticles (Ag NPs). Ag NPs of 45 to 90 nm size were located in the PVA core but also on the surface of the core-shell fibers and as individual, agglomerated, and polymer-coated particles of 100-200 nm. Powder X-ray diffraction (PXRD), energy dispersive X-ray spectroscopy (EDX), and UV-vis absorption spectroscopy confirmed the increasing amounts of Ag in the core-shell fibers when using increasing amounts of AgNO₃ in the spinning solutions. The antibacterial activity of the nanofiber mats against two prokaryotes Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) increased with increasing amounts of Ag, as expected and produces inhibition zones of 1 to 2 mm.     

Mechanical,thermal and morphological properties of environmentally degradable ABS and poly(vinyl alcohol) blends

Blends of acrylonitrile–butadiene–styrene (ABS) with 5, 10, 15, and 20 wt % of poly(vinyl alcohol) (PV) were prepared by extruding in a corotating twin screw extruder. The ABS material was blended with PVA with the objective to enhance the degradability of ABS. The extrudate strands were cut into pellets and injection molded to make test specimens. These ABS/PVA blend specimens were tested for physicomechanical properties like tensile strength, elongation, modulus of elasticity, abrasion resistance, density, and water absorption, These blends were further characterized by melt flow Index, differential scanning calorimetry, thermogravimetry analysis, and scanning electron microscopy. The morphological analysis reveals the existence of PVA domains in the ABS matrix. Differential scanning calorimetry thermograms indicates the chemical interaction between ABS and PVA domains. The prepared blends show enhanced environmental and thermal degradation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Antioxidant,antifungal, water binding,and mechanical properties of poly(vinyl alcohol) film incorporated with essential oil as a potential wound dressing material

In this study, the properties of poly (vinyl alcohol) (PVA) films incorporated with Zataria multiflora essential oil (ZMO) as a potential antioxidant/antibacterial material was investigated. PVA films were prepared from PVA solutions (2% w/v) containing different concentrations of ZMO. Water solubility, moisture absorption, water swelling, and water vapor permeability for pure PVA films were 57 ± 1.1, 99 ± 3.2%, 337 ± 8%, and 0.453 ± 0.015 g mm/m² h, respectively. Incorporation of ZMO into PVA films caused a significant decrease in water swelling and moisture absorption and increase in solubility and water vapor permeability. Tensile strength, elastic modulus, and elongation at break for pure PVA films were 13.5 ± 0.61 MPa, 15.2 ± 0.8 MPa, and 216 ± 4%, respectively. Incorporation of ZMO into the PVA films caused a significant decrease in tensile strength and elastic modulus and increase in elongation at break of the films. Pure PVA film showed UV‐visible light absorbance ranging from 280 to 440 nm with maximum absorbance at 320 nm. Addition of ZMO caused a significant increase in light absorbance and opacity. PVA films exhibited no antioxidant and antifungal activities, whereas PVA/ZMO films exhibited excellent antioxidant and antifungal properties. Although the bioactivity PVA films were improved by the addition of ZMO, however, the mechanical properties and water binding capacity of the films were weaken slightly. Thus, ZMO emulsified in the ethanol not compatible with PVA matrix and more suitable emulsifier was needed in order to obtain strong film with higher mechanical properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40937.     

Spectroscopic behavior of poly(vinyl alcohol) films with different molecular weights after UV irradiation,thermal annealing,and double treatment with UV irradiation and thermal annealing

Pure poly(vinyl alcohol) (PVA) films with molecular weights 5,000, 72,000, and 125,000 g/mole were prepared by casting technique. The thickness of prepared samples was 0.21 mm. Xenon arc lamp was used to irradiate two samples from each molecular weight at 400 W for 5 min. One from each irradiated PVA samples was heated at 423 K for 2 h. An additional PVA sample unirradiated from each molecular weight was heated at 423 K for 2 h. Optical absorption measurements have been carried out in the wavelength range of 190–900 nm for untreated, UV‐irradiated, heated, and double‐treated samples by UV irradiation and heat. The double‐treated PVA samples with molecular weights 5,000 and 72,000 g/mole showed approximately zero transmission in comparison with untreated PVA sample in the wavelength range of 190–320 nm. PVA sample with 125,000 g/mole was irradiated with 600 W for 5 min to obtain the zero transmission in the same wavelength range. Identification of the structure and assignments of energy bands were studied also by using FTIR. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 589–594, 2003     

Preparation and optical properties of transparent epoxy composites containing ZnO nanoparticles

Polymer nanocomposites are usually made by incorporating dried nanoparticles into polymer matrices. This way not only leads to easy aggregation of nanoparticles but also readily brings about opaqueness for nanocomposites based on functionally transparent polymers. In this letter, transparent ZnO/epoxy nanocomposites with high‐UV shielding efficiency were prepared via two simple steps: first, in situ preparation of zinc hydroxide (Zn(OH)₂)/epoxy from the reaction of aqueous zinc acetate (Zn(Ac)₂·2H₂O) and sodium hydroxide (NaOH) at 30°C in the presence of high‐viscosity epoxy resin; second, thermal treatment of the as‐prepared Zn(OH)₂/epoxy hybrid into ZnO/epoxy composites. Optical properties of the resultant ZnO/epoxy nanocomposites were studied using an ultraviolet–visible (UV–vis) spectrophotometer. The nanocomposites containing a very low content of ZnO nanoparticles (0.06 wt %) possessed the optimal optical properties, namely high‐visible light transparency and high‐UV light shielding efficiency. Consequently, the as‐prepared ZnO/epoxy nanocomposites are promising for use as novel packaging materials in lighting emitting diodes technology. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Uniaxial tensile and structural properties of poly(vinyl alcohol) films: The influence of heating and film thickness

Poly(vinyl alcohol) as pure or composite materials is widely used in the food and textile industries, andbiomedical applications due to some important properties such as uniaxial tensile, biocompatibility, and noncarcinogenicity. Investigation of the influence of the film thickness and heating on the uniaxial tensile, spectroscopic, and surface properties of PVA films investigated in this study is quite important for improving the properties of such materials and their applicability in different conditions. In this study, with the influence of heating, a necking behavior was observed at around 2% for thin films and 4–9% strain for thicker PVA films for which a kind of transition point at around 1–2% strain was observed. The mechanical strength of PVA films, strain at break, and Young's modulus were enhanced greatly as the temperature increased from 80 to around 110 °C, and then most of them decreased. The degree of crystallinity increased linearly with the heat temperature from around 36–40%. Although PVA thin films obtained a very smooth surface structure after being heated at 80 °C, with increasing heat temperature, the surface roughness of both thin and thick PVA films increased and the PVA thin films obtained more degraded film surface. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44915.     

Preparation and properties of keratin–poly(vinyl alcohol) blend fiber

Keratin–poly(vinyl alcohol) (PVA) blend fibers containing 13–46 wt % of –SSONa⁺ (S‐sulfo) keratin were prepared by the wet‐spinning technique. They were formed by dehydration of an aqueous solution of S‐sulfo keratin and PVA (spinning dope) in a coagulation bath of sodium sulfate–saturated solution and subsequently drawn. Keratin–PVA fibers showed higher tenacity than that of wool, presumably originating from the high mechanical strength of the PVA component. The heat treatment at about 200°C improved the waterproof characteristics such as shrinkage of keratin–PVA fibers more conspicuously than did PVA fibers. That is, after heat treatment at 195°C for 10 min, keratin–PVA blend fiber shrank 20% in water at 60°C, whereas PVA fiber shrank 56%. Differential thermal analysis suggested the crosslinking of disulfide bonds between keratin molecules during the heat treatment, whereas the additional crystallization of PVA component was not observed. Adsorption of heavy metal and toxic gas to keratin–PVA fibers was also investigated. Keratin–PVA fiber was found to adsorb Ag⁺ and formaldehyde gas more efficiently than PVA. Thus, blends of keratin and PVA were advantageous for both polymer fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 756–762, 2004     

Preparation and characterization of hydrophilic and antibacterial silver decorated silica-grafted-poly(vinylpyrrolidone) (Ag-SiO2-PVP) nanoparticles for polymeric nanocomposites

Hydrophilic antibacterial silver decorated silica-grafted-poly(vinylpyrrolidone) (Ag-SiO₂-PVP) nanoparticles were successfully synthesized in multiple steps. In this regard, silanization of the silica nanoparticles was performed with different concentrations of vinyltrimethoxysilane (VTS) to generate vinyl groups onto the nanoparticles surface. Obtained results showed that by increasing the VTS concentration the amount of vinyl groups on the surface of the silica nanoparticles increased while nanoparticles agglomeration did not occur. Then, poly(vinylpyrrolidone) PVP brushes were grafted onto the silanized silica nanoparticles (SiO₂-VTS) via grafting-through polymerization method to obtain PVP-grafted silica nanoparticles (SiO₂-PVP). Fourier transform infrared spectroscopy, thermal gravimetric analysis, and dynamic light scattering confirmed the successful generation of the vinyl groups and PVP brushes onto the silica nanoparticles. Finally, Ag-SiO₂-PVP nanoparticles were prepared by synthesizing silver nanoparticles onto the SiO₂-PVP nanoparticles to render them antibacterial. Energy dispersive X-ray spectroscopy showed that highest grafting of silver nanoparticles onto the SiO₂-PVP nanoparticles was obtained for the nanoparticles with highest content of vinyl groups. X-ray photoelectron spectroscopy was used to identify the elements and their chemical structure for the synthesized nanoparticles. Plate colony counting method was applied to assess the antibacterial effects of the Ag-SiO₂-PVP nanoparticles which revealed outstanding bactericidal properties of them.     

Ag NPs改性鱼鳞明胶-琼脂复合膜的制备及性能表征

利用鱼鳞明胶作为还原剂和稳定剂制备银纳米颗粒（silver nanoparticles, Ag NPs），研究Ag NPs添加量（0.04wt%-0.2wt%）对鱼鳞明胶-琼脂复合膜的理化性能和抗菌性能的影响。通过透射电子显微镜和X射线粉末衍射对合成的Ag NPs进行表征，结果表明制得Ag NPs为球形形貌，平均粒径为9.3 ?1.8 nm。随着Ag NPs添加量的增加，鱼鳞明胶-琼脂复合膜的色泽变黄渐深，透明度下降，对紫外和可见光的吸收增强，同时，复合膜的断裂延展性、水蒸气阻隔性能和耐水性能显著增强，而厚度和抗拉强度却无明显变化。FTIR和热重分析结果表明，Ag NPs与膜基质间存在化学相互作用，并在一定程度上改善了复合膜的热稳定性。抑菌环实验结果显示，复合膜可以在0.04wt%-0.2wt%较低的银浓度下实现良好的抗菌效果。研究结果将为鱼鳞明胶可降解抗菌包装材料的开发提供新思路。     

Preparation and characterization of poly(vinyl alcohol)‐modified red mud composite materials

A series of polymer–acid‐modified red mud composite (PRM) materials that consist of poly(vinyl alcohol) (PVA) and layered Red mud (RM) are prepared by effectively dispersing organic PVA matrix into the inorganic layers of modified RM via a conventional solvent casting technique. The as‐synthesized PRM materials are typically characterized by Fourier transformation infrared (FTIR) spectroscopy and wide‐angle X‐ray diffraction. The morphological image of as‐synthesized materials is studied by scanning electron microscopy (SEM) and optical microscope (OM). Effects of the material composition on the thermal stability and optical clarity of PVA along with a series of PRM materials freestanding film are also studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and UV–vis transmission spectra, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 238–243, 2007