首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
In this article, graft copolymerization of N‐vinyl‐2‐pyrrolidone onto xanthan gum initiated by potassium peroxydiphosphate/Ag+ system in an aqueous medium has been studied under oxygen free nitrogen atmosphere. Grafting ratio, grafting efficiency, and add on increase on increasing the concentration of potassium peroxydiphosphate (2.0 × 10?3 to 12 × 10?3 mol dm?3), Ag+(0.4 × 10?3 to 2.8 × 10?3 mol dm?3), and hydrogen ion concentration from 2 × 10?3 to 14.0 × 10?3 mol dm?3. Maximum grafting has been obtained when xanthan gum and monomer concentration were 0.4 g dm?3 and 16 × 10?2 mol dm?3, respectively, at 35°C and 120 min. Water swelling capacity, swelling ratio, metal ion uptake, and metal retention capacity have also been studied, and it has been found that graft copolymer shows enhancement in these properties than pure xanthan gum. The graft copolymer has been characterized by FTIR and thermal analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009  相似文献   

2.
Unreported graft copolymer of N,N′‐dimethylacrylamide (DMA) with partially carboxymethylated guar gum (CmgOH) has been synthesized and the reaction conditions have been optimized for affording maximum grafting using a potassium peroxymonosulphate (PMS)/thiourea (TU) redox initiators under nitrogen atmosphere. The study of graft copolymerization has been performed to observe maximum value of grafting parameters except percentage of homopolymer by varying the concentrations of DMA, PMS, and TU. The grafting parameters increase continuously on increasing the concentration of DMA from 8 × 10?2 to 24 × 10?2 mol dm?3, PMS from 5 × 10?3 to 21 × 10?3 mol dm?3, and TU from 1.6 × 10?3 to 4.8 × 10?3 mol dm?3. The optimum temperature and time for grafting of DMA onto CmgOH were found to be 35°C and 120 min, respectively. The water‐swelling capacity of graft copolymer is investigated. Flocculation property for both coking and noncoking coals is studied for the treatment of coal mine waste water. The graft copolymer is characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010  相似文献   

3.
A xanthan gum‐gN‐vinyl formamide graft copolymer was synthesized through the graft copolymerization of N‐vinyl formamide (NVF) onto xanthan gum with an efficient system, that is, potassium monopersulfate (PMS)/Ag(I) in an aqueous medium. The effects of the concentrations of Ag(I), PMS (KHSO5), hydrogen ion, xanthan gum, and NVF along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer) and the rate of grafting. The maximum grafting ratio was obtained at a 0.6 g/dm3 concentration of xanthan gum. All the parameters showed an increasing trend with an increasing concentration of peroxymonosulfate, except the homopolymer percentage, which showed a decreasing trend. The grafting ratio, add‐on conversion, grafting efficiency, and rate of grafting increased with the concentration of Ag(I) increasing from 0.8 × 10?2 to 1.2 × 10?2 mol/dm3. The optimum time and temperature for the maximum degree of grafting were 90 min and 35°C, respectively. The graft copolymer was characterized with IR spectral analysis, thermogravimetric analysis, and differential calorimetry analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1637–1645, 2006  相似文献   

4.
The aim of this study was to examine the synthesis of a graft copolymer of chitosan and methacrylic acid (MAA) by free‐radical polymerization with a potassium peroxymonosulfate/cyclohexanone (CY) redox system in an inert atmosphere. The optimum reaction conditions affording maximum grafting ratio (%G), grafting efficiency (%E), add on (%A), and conversion (%C) were determined. The grafting parameters were found to increase with increasing concentration of MAA up to 24 × 10?2 mol/dm3, but thereafter, these parameters decreased. With increasing concentration of peroxymonosulfate from 0.6 × 10?2 to 1.2 × 10?2 mol/dm3, %G, %A, and %E increased continuously. All of these grafting parameters increased with increasing concentration of CY up to 1.2 × 10?2 mol/dm3, but beyond this concentration, the grafting parameters decreased. With various concentrations of chitosan from 0.6 to 1.4 g/dm3, the maximum %G, %A, and %E were obtained at 1.4 g/dm3. %G, %A, and %C decreased continuously with various concentrations of hydrogen ions from 2 × 10?3 to 6 × 10?3 mol/dm3. The grafting parameters increased with increasing temperature up to 35°C, but thereafter, these parameters decreased. With increasing time period of reaction from 60 to 180 min, %G, %A, and %E increased up to 120 min, but thereafter, these parameters decreased. The graft copolymer was characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009  相似文献   

5.
The effect of reaction conditions on the grafting parameter during grafting of acrylamide onto guar gum has been studied using peroxydiphosphate–metabisulphite redox pair at 35 °C. Grafting ratio, efficiency and add‐on all increase as the concentrations of peroxydiphosphate and acrylamide increase up to 40.0 × 10−3 mol dm−3 and 40.0 × 10−2 mol dm−3, respectively. It has been observed that the optimum concentrations of metabisulphite and guar gum for obtaining high grafting ratio, efficiency, add‐on and conversion are 6.0 × 10−3mol dm−3 and 91.7 × 10−2 g dm−3, respectively. © 2000 Society of Chemical Industry  相似文献   

6.
Graft copolymerization of 4‐vinylpyridine (4‐VP) onto guar gum (GOH) using potassium monopersulfate (PMS)/thioacetamide (TAA) as a redox pair was studied in an aqueous medium under inert atmosphere. The concentration of potassium monopersulfate and thioacetamide should be 1.0 × 10?2 and 5.0 × 10?3 mol dm?3, respectively, for highest grafting ratio and efficiency. Efficient grafting was observed at 19.25 × 10?2 and 4.87 × 10?2 mol dm?3 concentration of 4‐vinylpyridine and sulfuric acid, respectively. The optimum temperature for grafting is 30°C. As the time period of reaction is increased, the grafting ratio increases, whereas efficiency decreases. The plausible mechanism of grafting has been suggested. A sample of guar gum and guar‐ g‐4‐vinylpyridine were subjected to thermogravimetric analysis with the objective of studying the effect of grafting 4‐vinylpyridine on the thermal stability of guar gum. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2380–2385, 2002  相似文献   

7.
Polysaccharide based graft copolymer (xanthan gum‐g‐4‐vinyl pyridine) was synthesized using potassium peroxymonosulphate/ascorbic acid redox initiator in inert atmosphere at 40°C. By studying the effect of the concentration of monomer, peroxymonosulphate (PMS), ascorbic acid (AA), xanthan gum (XOH), hydrogen ion along with effect of time and temperature on grafting characteristics: grafting ratio (%G), add on (%A), conversion (%C), efficiency (%E), homopolymer (%H), and rate of grafting (Rg), the reaction conditions for optimum grafting were determined. The optimum concentration of AA, H+ ion, 4‐VP for maximum grafting were found to be 10.0 × 10?3 mol dm?3, 2.5 × 10?2 mol dm?3, 10.0 × 10?3 mol dm?3, respectively. Maximum %G was obtained at minimum concentration of xanthan gum i.e., at 40.0 × 10?2 g dm?3 and at maximum concentration of PMS i.e., at 10.0 × 10?3 mol dm?3. The optimum temperature and time duration of reaction for maximum % of grafting were found to be 45°C and 120 min respectively. The synthesized graft copolymer was characterized by FTIR analysis. Thermogravimetric analysis showed that the xanthan gum‐g‐4‐vinyl pyridine is thermally more stable than pure gum. A probable mechanism was suggested for the graft copolymerization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009  相似文献   

8.
Unreported graft copolymer of 2‐acrylamido‐2‐methyl‐1‐propanesulphonic acid (AMPS) with sodium carboxymethylcellulose (Na‐CMC) was synthesized and reaction conditions were optimized using a bromate/thiourea redox pair under an inert atmosphere at 40°C. Grafting ratio, add on, and conversion increase as the concentration of thiourea and [H+] increases up to 3.6 × 10?3 and 0.6 × 10?2 mol dm?3, respectively, while on increasing the concentration of bromate ion and Na‐CMC, grafting ratio, add on, and conversion decrease. The samples of Na‐CMC and grafted Na‐CMC with AMPS were subjected to thermogravimetric analysis, with the objective of studying the effect of grafting of AMPS on the thermal stability of graft copolymer. The graft copolymer was found to be more thermally stable than pure Na‐CMC. Comparing the IR spectra of pure with grafted Na‐CMC confirm the evidence of grafting. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 100: 26–34, 2006  相似文献   

9.
A graft copolymer based on a polysaccharide (sodium salt of carboxymethylcellulose) and a vinyl monomer (acrylamide) has been synthesized in a nitrogen atmosphere, and its reaction conditions have been optimized for a better yield with ferrous sulfate and potassium bromate as a redox initiator. The effects of ferrous ion, bromate ion, hydrogen ion, sodium carboxymethylcellulose, and acrylamide along with the reaction time and temperature have been studied through the determination of the grafting parameters: the grafting ratio, add‐on, conversion, efficiency, homopolymer, and rate of grafting. The maximum yield has been found to occur when the acrylamide concentration is 8.0 × 10?2 mol/dm3, whereas the maximum conversion occurs at a minimum concentration of acrylamide, that is, at 3.0 × 10?2 mol/dm3. The grafting parameters have been found to increase with an increasing concentration of the redox initiator (Fe2+, from 2.0 × 10?3 to 10.0 × 10?3 mol/dm3; BrO, from 2.2 × 10?3 to 4.0 × 10?3 mol/dm3). The maximum efficiency occurs with a reaction time of 210 min. The rate of grafting has been found to be maximum up to 60 min; after that, it decreases rapidly. In this article, it is shown that the hydrogen ion leads to a very clear decrease in the grafting parameters as its concentration increases from 2.1 × 10?3 to 11.3 × 10?3 mol/dm3. Grafted gum and ungrafted gum have been characterized with Fourier transform infrared spectroscopy and thermogravimetric analysis. A probable mechanism has been suggested for graft copolymerization. It has been observed that the graft copolymer is thermally more stable than the parent backbone. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008  相似文献   

10.
Calcium alginate gel beads containing insect repellent N,N‐diethyl‐3‐methylbenzamide (CAGBDs) were modified via grafting copolymerization with a vinyl monomer. CAGBDs (5 g) were initiated with 8.5 × 10?2 mol/L potassium persulfate and 7.0 × 10?2 mol/L sodium bisulfite at the ambient temperature for 10 min, and then 6.22 mol/L acrylonitrile was added in droplets; the mixture was allowed to react at the same temperature for another 30 min. The effects of reaction conditions such as the stirring speed and monomer concentration on the modification of CAGBDs were investigated. Scanning electron microscopy analysis showed that the surface of modified CAGBDs was compact enough to keep N,N‐diethyl‐3‐methylbenzamide from touching. The release rate of N,N‐diethyl‐3‐methylbenzamide from modified CAGBDs was slower than that from unmodified CAGBDs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4850–4855, 2006  相似文献   

11.
In the present article, the graft copolymerization of 4‐vinyl pyridine onto guar gum initiated by potassium peroxymonosulphate/ascorbic acid redox pair in an aqueous medium was studied gravimetrically under a nitrogen atmosphere. Grafting ratio, grafting efficiency, and add on increased on increasing the concentration of potassium peroxymonosulphate from 5.0 × 10?4 to 10 × 10?4 mol/L and ascorbic acid concentration from 0.4 × 10?3 to 2.0 × 10?3 mol/L. On increasing the hydrogen ion concentration from 2.5 × 10?3 to 10.0 × 10?3 mol/L, grafting ratio, efficiency, add on and conversion were increased. Maximum grafting was obtained when guar gum and monomer concentration were 1.0 g/L and 20.0 × 10?2 mol/L, respectively. An increase in temperature from 30 to 35°C increased the grafting ratio, but conversion and homopolymer decreased. The graft copolymers were characterized by IR spectroscopy and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007  相似文献   

12.
The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H2O2/Fe+2 redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H2O2 concentration in the range of (10.0–15.0) × 10?2 mol dm?3. Thereafter, these parameters decrease with the H2O2 concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10?2 mol dm?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006  相似文献   

13.
The graft copolymer of xanthan gum with methacrylic acid was synthesized in inert atmosphere by using Fentos reagent as a redox initiator. The effect of reaction conditions on grafting parameters [G(%), E(%), C(%), A(%), H(%), and Rg] was investigated. Similar trend was observed on increasing the concentration of ferrous ion and hydrogen peroxide from 4.0 to 20.0 × 10?3 mol dm?3 and 2.5 to 10 × 10?3 mol dm?3 respectively, i.e., initially grafting parameters increased and after a certain range of concentration grafting parameters showed decreasing trend. Hydrogen ion shows influenced result i.e., small increment of concentration in hydrogen ion presents much increment in percent of grafting. It was observed that the [G(%), E(%), C(%), A(%), and Rg] increased upto 6.67 × 10?2 mol dm?3 concentration of methacylic acid after that it decreased. Maximum G(%) was obtained at minimum concentration of xanthan gum i.e., at 40 × 10?2 g dm?3. The optimum temperature and time duration of reaction for maximum percentage of grafting were found to be 45°C and 150 min respectively. Thermogravimetric analysis showed that the xanthan gum‐g‐methacrylic acid is thermally more stable than pure gum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007  相似文献   

14.
Graft copolymers of sodium carboxymethylcellulose with N‐vinyl‐2‐pyrrolidone were prepared in aqueous solutions with azobisisobutyronitrile as the initiator. The graft copolymers [sodium carboxymethylcellulose‐g‐poly(N‐vinyl‐2‐pyrrolidone)] were characterized with Fourier transform infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The grafting parameters, including the graft yield of the graft copolymer and the grafting efficiency of the reaction, were evaluated comparatively. The effects of reaction variables such as the time, temperature, and monomer and initiator concentrations on these parameters were studied. The graft yield and grafting efficiency increased and then decreased with increasing concentrations of N‐vinyl‐2‐pyrrolidone and azobisisobutyronitrile and increasing polymerization temperatures. The optimum temperature and polymerization time were 70°C and 4.30 h, respectively. Further changes in the properties of grafted sodium carboxymethylcellulose, such as the intrinsic viscosity, were determined. The overall activation energy for the grafting was also calculated to be 10.5 kcal/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 936–943, 2007  相似文献   

15.
The grafting of 4‐vinyl pyridine (4‐VP) onto konjac glucomannan (KGM) by ammonium persulfate (APS) as the initiator was studied in an acid aqueous solution under an inert atmosphere. The grafting ratio (G%) and grafting efficiency (E%) were evaluated comparatively. The dependence of these parameters on the initiator concentration, sulfuric acid concentration, ratio of monomer to KGM, temperature, and reaction time was also investigated. Under conditions of [KGM] = 1.00 g/L, [APS] = 1.00 × 10?2 mol/L, [4‐VP] = 9.32 × 10?2 mol/L, [H+] = 5.00 × 10?2 mol/L, temperature = 35°C, and time = 120 min, the optimum G% and E% were 307.27 and 52.75%, respectively. The proof of grafting was obtained from thermogravimetric analysis and infrared spectra. Preliminary research of the graft's adsorption capacity for heavy‐metal ions [Cr(VI), Cu(II), Pb(II), and Cd(II)] was done. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009  相似文献   

16.
Poly(methyl methacrylate) has been grafted onto mulberry silk in an aqueous medium by using potassium peroxydiphosphate–cysteine (PP–Cys) redox initiator. Various effects upon grafting such as concentration of cysteine, concentration of peroxydiphosphate, concentration of monomer, concentration of sulfuric acid, and temperature were studied. At a low range of cysteine concentration (6.25 × 10?4 mol/L), the rate of polymerization Rp (%/s) is proportional to cysteine concentration and the exponent is calculated to be 0.8. The monomer exponent is calculated to be unity up to the concentration of 65.72 × 10?2 mol/L. From the Arrhenius plot of log Rp vs. 1/T (T = absolute temperature) the overall activation energy is computed to be 15.19 kcal/mol. A suitable kinetic path has been pictured and a rate expression has been derived.  相似文献   

17.
A previously unreported graft copolymer of xanthan gum (XOH) with acrylic acid was synthesized and the reaction conditions were optimized using a potassium monopersulfate (PMS)/Fe2+ redox pair. Grafting ratio, add on, and conversion increase with an increase in the ferrous ion concentration (2.0 × 10?3 to 5.0 × 10?3 mol dm?3) and PMS concentration (1.0 × 10?3 to 4.0 × 10?3 mol dm?3). It was observed that grafting takes place efficiently when the acrylic acid concentration and temperature were 5.0 × 10?2 mol dm?3 and 35°C, respectively. Samples of xanthan gum and xanthan gum–g–acrylic acid were subjected to thermogravimetric analysis with the objective of studying the effect of grafting of acrylic acid on the thermal stability of xanthan gum. The graft copolymer was found to be more thermally stable than xanthan gum. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1341–1346, 2003  相似文献   

18.
Graft copolymerization of methyl methacrylate onto silk was investigated in aqueous solution using potassium peroxydiphosphate as initiator. The rate of grafting was determined by varying monomer, peroxydiphosphate ion, temperature, and solvent. The graft yield increased with increasing peroxydiphosphate ion upto 8 × 10?3 mol/1 and with further increase of peroxydiphosphate ion the graft yield decreased. The graft yield increased with increasing monomer concentration upto 9 wt.-% and with further increase of monomer the graft yield decreased. The rate of grafting increased with the increase of temperature. The effect of acid and water soluble solvents and salts on graft yield was investigated and a suitable rate expression was derived.  相似文献   

19.
The results of adiabatic compressibility measurements for two copolymers, acrylic acid-vinyl pyrrolidone (AA—VP) and N-dimethylaminoethyl methacrylate-vinyl pyrrolidone (DAM—VP), in three different solvents, namely, water, methanol, and dioxane, have been described. The molecular weight of copolymers was determined by the light scattering method and the IR and NMR spectra of the polymers and copolymers were examined to establish that the alternating acrylic acid–vinyl pyrrolidone and N-dimethylaminoethyl methacrylate–vinyl pyrrolidone structure exists in the copolymers. The AA—VP copolymer behaves as a slightly weaker acid than the homopolymer of acrylic acid, while DAM—VP copolymer is very feebly basic and has the same strength as that of the homopolymer of N-dimethylaminoethyl methacrylate. The reduced viscosity for the two copolymers in aqueous solution is very low (~0.08 dL/g for AA—VP copolymer). In methanol solution AA—VP and DAM—VP copolymers show a decrease of øK°2 and øV°2 by 61.6 × 10?4 cc/bar/mol and 8.0 cc/mol, and 191.0 × 10?4 cc/bar/mol and 20.0 cc/mol, respectively, over that of the values of aqueous solution. The void space around the solute is smaller in methanol than in water, and accordingly this decrease has been attributed to geometric effect. Only one copolymer, DAM—VP is soluble in dioxane, and the values are seen to have increased in this solution by 71.0 × 10?4 cc/bar/mol and 18.7 cc/mol, respectively, compared to the values obtained from aqueous solution. The experimentally determined øK°2 and øV°2 for AA—VP and DAM—VP copolymer are 0.6 × 10?4 cc/bar/mol, and 102.4 cc/mol and ?61.0 × 10?4 cc/bar/mol, 94.4 cc/mol, respectively, in aqueous solution, and ?12.0 × 10?4 cc/bar/mol, 211.0 cc/mol and ?203.0 × 10?4 cc/bar/mol, 191.0 cc/mol, respectively, in methanol solution. In dioxane solution the values for DAM—VP copolymer are 59.0 × 10?4 cc/bar/mol and 229.7 cc/mol, respectively. These experimentally determined values for AA—VP copolymer show an increase by 0.04 × 10?4 cc/bar/mol, 4.4 cc/mol and 28.3 × 10?4 cc/bar/mol, 8.0 cc/mol in aqueous and methanol solution, respectively, compared to calculated values determined on the basis of no interaction between acid and the pyrrolidone group. In contrast, the DAM—VP copolymer shows a decrease of 27.6 × 10?4 cc/bar/mol and 10.3 cc/mol, 149.3 × 10?4 cc/bar/mol and 20.2 cc/mol, and 23.0 × 10?4 cc/bar/mol and 4.1 cc/mol in aqueous, methanol, and dioxane solutions, respectively. In aqueous solution these differences between calculated and observed values have been attributed to a change of water structure around the copolymer chain. A similar effect is responsible for the difference of the values in the methanol solution also. In the dioxane solution the difference is rather small, and the solvent structure has probably not altered much due to the presence of the DAM unit in the chain.  相似文献   

20.
Alginate‐g‐vinyl sulfonic acid graft copolymer was synthesized through the graft copolymerization of vinyl sulfonic acid (VSA) onto alginate with an efficient system, i.e., potassium peroxydiphosphate (PDP)/thiourea in an aqueous medium. The effects of the concentration of thiourea, PDP, hydrogen ion, alginate, and VSA along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer). The synthesized graft copolymer was characterized by FTIR analysis. Thermogravimetric analysis showed that the alginate‐g‐vinyl sulfonic acid is thermally more stable than alginate. Water swelling capacity, metal ion sorption, flocculation, and resistance to biodegradability studies of synthesized graft copolymer have been performed with respect to the parent polymer. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号