Flammability and thermal degradation of intumescent flame‐retardant polypropylene composites

The flammability of polypropylene (PP) composites containing intumescent flame‐retardant additives, i.e., melamine pyrophosphate (MPP) and 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA) was characterized by limiting oxygen index (LOI), UL 94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TG) and real‐time Fourier transform infrared (RTFTIR). It has been found that the PP composite only containing MPP (or PEPA) does not show good flame retardancy even at 30% additive level. Compared with the PP/MPP binary composite, the LOI values of the PP/MPP/PEPA ternary composites at the same additive loading are all increased, and UL 94 rating of the ternary composite (PP3) studied is raised to V‐0 rating from no rating (PP/MPP). The cone calorimeter results show that the heat release rate of some ternary composites decreases in comparison with the binary composite. It is noted from the TG data that initial decomposition temperatures of ternary composites are lower than that of the binary composites. The RTFTIR study indicates that the PP/MPP/PEPA composites have higher thermal oxidative stability than the pure PP. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Study on effect of polydimethylsiloxane in intumescent flame retardant polypropylene

The effect of polydimethylsiloxane (PDMS) in intumescent flame retarded polypropylene (PP) containing melamine phosphate (MP) was studied using limiting oxygen index (LOI), UL-94 test, thermogravimetric analysis (TG), real time Fourier transform infrared (FTIR) and pyrolysis/gas chromatogram/mass spectrometry (Py–GC/MS). It was found that the addition of PDMS into the PP/MP composites leads to a decrease in the LOI values of the PP/MP/PDMS composites, and the values increase gradually with the increase of the PDMS content. The UL-94 test results indicate that the PP/MP/PDMS composite with 30% PDMS reaches the V-0 rating compared with no rating of the PP/MP composite at the same MP loading. The water resistance of the PP/MP/PDMS composites was investigated, and the improved water leaching of MP was observed. The TG and RTFTIR results illustrate the thermal stability of the PP/MP composites containing PDMS is improved. Moreover, the pyrolysis of the PP/MP/PDMS composites was studied by the Py–GC/MS method.     

Role of caged bicyclic pentaerythritol phosphate alcohol in flame retardancy of PA6 and mechanism study

A series of PA6/PEPA composites were prepared by mixing caged bicyclic pentaerythritol phosphate alcohol (PEPA) and polyamide 6 (PA6) at different feed ratios by the melt‐blending method in a twin‐screw extruder. The influence of PEPA on the flame‐retardant properties of PA6 was investigated using the limiting oxygen index (LOI), the Underwriters Laboratories UL‐94 test, and the cone calorimeter method. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, X‐ray photoelectron spectroscopy, thermogravimetry (TG), and TG‐FTIR were conducted to study the influence of PEPA on the thermal decomposition and the mechanism of performance of PA6 from products of condensed and gaseous phases. The results show that the LOI value and the content of residual char of PA6/PEPA composites increased with increasing PEPA content, and an LOI value of 38% could be reached when the feed ratio of PEPA was 30 wt %. The average heat release rate and total heat release drastically decreased with increasing content of PEPA, and the amount of carbon residue increased by 52.9% over neat PA6 after TG tests. The inorganic acid produced by PEPA during combustion can be used as an acid source to promote the dehydration of PA6 and the processes of esterification crosslinking, arylation, and carbonization. Moreover, there was less CO₂ released than by PA6, and more carbon‐containing compound remained in the composites so that a stable carbon layer structure was formed. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46236.     

Preparation and characterization of double shell microencapsulated ammonium polyphosphate and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MUFAPP) with a double shell is prepared by in situ polymerization, and is characterized by FTIR, XPS and SEM, etc. The microencapsulation of APP can increase its flame retardance and water resistance in PP. The flame retardant action of MUFAPP and APP in PP are studied using LOI and UL 94 test, and their thermal stability is evaluated by TG. The LOI value of the PP/MUFAPP composite at the same loading is higher than that of PP/APP composite. The LOI values of the PP/MUFAPP/ dipentaerythritol are higher than that of the PP/MUFAPP, and UL 94 ratings of most ternary composites are raised to V-0 at 30 wt.% loading. The results of the cone calorimeter also indicate that MUFAPP is an effective flame retardant in PP. The thermal degradation behaviors of APP and MUFAPP are studied using TG and dynamic FTIR.     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

膨胀型阻燃剂/二乙基次磷酸铝阻燃改性不饱和树脂基复合材料

采用密胺包覆聚磷酸铵（APP）、季戊四醇（PER）和三聚氰胺（MEL）作为膨胀型阻燃剂（IFR）对不饱和树脂（UP）进行改性,研究了APP、PER和MEL不同复配比例及用量对不饱和树脂基复合材料阻燃性能和力学性能的影响。基于IFR最佳用量,以二乙基次磷酸铝（ADP）为协效剂,研究了ADP用量对IFR/UP阻燃复合材料阻燃性能、力学性能及热稳定性的影响。结果表明,当APP∶PER∶MEL复配比例为4∶1∶1,IFR添加量为15 %（质量分数,下同）时,复合材料综合性能最佳,其极限氧指数为27.4 %,UL 94垂直燃烧达到V?1等级,弯曲强度和冲击韧性分别为100.3 MPa和6.3 kJ/m²;ADP的引入能够进一步提高IFR/UP复合材料阻燃性能,且随着ADP质量分数的增加而增强;当ADP质量分数为2 %时,IFR?ADP/UP复合材料极限氧指数为28.5 %并达到V?0阻燃等级,弯曲强度和冲击韧性分别为110 MPa和7.8 kJ/m²,与IFR/UP复合材料相比,分别提高了9.7 %和23.8 %;ADP能够促进IFR/UP复合材料表面成炭,缓解基体的热降解。     

An easy‐to‐obtain silicone‐containing flame retardant and its effects on the combustion of polycarbonate

A novel silicone‐containing flame retardant (HSOBA) synthesized from hydrogen‐containing silicone oil and Bisphenol A via a simple approach has been incorporated into polycarbonate (PC) matrix to study its effects on the flame retardancy. The flame retardancy of PC/HSOBA composites is investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter measurement. The LOI value of the composites is 31.7 and the UL‐94 rating reaches V‐0, when the content of HSOBA is 3 wt %. Cone calorimeter data confirm that the HSOBA acts as an effective additive functioning both as flame retardants and as smoke suppressant. Evolution of the thermal behaviors of the composites tested by TGA, the morphological structures, and the constituent of char residue after LOI tests characterized by scanning electronic microscopy‐energy‐dispersive X‐ray analysis were used to explain the possible flame‐retardant mode. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Synergistic effect of expandable graphite and melamine phosphate on flame‐retardant polystyrene

The halogen‐free flame‐retardant polystyrene (PS) composites containing expandable graphite (EG) and melamine phosphate (MP) were prepared successfully, and the thermal degradation behavior and fire performance were investigated by various measurements. The experimental results show that EG and MP have a synergistic effect on flame‐retardant PS, which can catalyze the char formation from PS. PS/MP/EG_(1:2) composite achieves limited oxygen index value of 28.0% and UL‐94V‐0 (1.6 mm) rate. The mass retention at high temperature (800 °C) under air atmosphere of PS composites have a large increase by the introduction of EG and MP. Microscale combustion calorimeter (MCC) and cone calorimetric analysis indicate that the heat release rate and total heat release of PS/MP/EG_(1:2) composite are reduced significantly, because the formed thick char layer has a notable barrier property. The study on the char residue of PS/MP/EG_(1:2) composite by X‐ray photoelectron spectroscopy (XPS) analysis confirms the formation of the stable structures containing P? O? C. Furthermore, the mechanical properties of PS composites were also investigated; compared with neat PS, the addition of flame retardants leads to the decrease of tensile strength and flexural strength, but the impact strength of PS/MP/EG_(1:2) has increased by 44.2%. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45474.     

新型含氮阻燃剂/PEPA协同阻燃PP的性能

以三聚氯氰、对羟基苯甲酸甲酯、水合肼为原料经两步反应合成了一种新型含氮阻燃剂4,4′,4″–(1,3,5–三嗪–2,4,6–三取代)三氧三苯甲酰肼(TNTN),并通过核磁共振等对其进行表征。将合成的含氮阻燃剂TNTN与1–氧–4–羟甲基–2,6,7–三氧杂–1–磷杂双环[2.2.2]辛烷(PEPA)以不同配比制备膨胀型阻燃聚丙烯(PP)材料(IFR–PP)。通过极限氧指数(LOI)、垂直燃烧(UL–94)、热重(TG)分析、锥形量热(CCT)法以及扫描电子显微镜(SEM)对阻燃PP燃烧及热稳定性能进行表征。结果表明,IFR–PP同时具有良好的阻燃性及抗熔滴能力,当PEPA∶TNTN=2∶1时,UL–94达到V–0级,LOI值达到了33.7%,表现出良好的阻燃性能。TG测试表明:阻燃剂的加入使IFR–PP材料提前降解,同时提高了材料的成炭性能,当PEPA∶TNTN=5∶1时,600℃时IFR–PP材料的残炭量由空白样的0.07%提高到了20.6%。CCT测试表明:相对于纯PP,经阻燃剂改性后的PP热释放率和总热释放量均显著减少。SEM测试表明:不同配比阻燃剂的加入使PP在燃烧过程中形成膨胀、致密的炭层,很好地保护了下层材料,提高了PP材料的阻燃性能。     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Influence of polyamide 6 as a charring agent on the flame retardancy,thermal, and mechanical properties of polypropylene composites

In this work, polyamide 6 (PA6) as a charring agent has been used in combination with thermoplastic polyurethane (TPU)‐microencapsulated ammonium polyphosphate (MTAPP) forming intumescent flame retardants (IFRs) which applies in polypropylene (PP). The effects of the IFRs on the flame retardancy, morphology of char layers, water resistance, thermal properties and mechanical properties of flame‐retardant PP composites are investigated by limiting oxygen index (LOI), UL‐94 test, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and mechanical properties test. The results show that the PP/MTAPP/PA6 composites exhibit much better flame‐retardant performances than the PP/MTAPP composites. The higher LOI values and UL‐94 V‐2 of the PP/MTAPP composites with suitable amount of PA6 are obtained, which is attributed to the thick and compact char layer structure evidenced by SEM. The results from TGA and DSC demonstrate that the introduction of PA6 into PP/MTAPP composites has a great effect on the thermal stability and crystallization behaviors of the composites. Furthermore, the mechanical properties of PP/MTAPP/PA6 composites are also improved greatly due to the presence of PA6 as a charring agent. POLYM. ENG. SCI., 55:1355–1360, 2015. © 2015 Society of Plastics Engineers     

Component ratio effects of hyperbranched triazine compound and ammonium polyphosphate in flame‐retardant polypropylene composites

A hyperbranched derivative of triazine group (EA) was synthesized by elimination reaction between ethylenediamine and cyanuric chloride. The different‐mass‐ratio EA and ammonium polyphosphate (APP) were mixed and blended with polypropylene (PP) in a constant amount (25%) to prepare a series of EA/APP/PP composites. The component ratio effect of EA/APP on the flame‐retardant property of the EA/APP/PP composites was investigated using the limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimetry tests. Results indicated that the EA/APP/PP (7.50/17.50/75.00) composite with the appropriate EA/APP mass ratio had the highest LOI, UL94 V‐0 rating, lowest heat release rate, and highest residue yield. These results implied that the appropriate EA/APP mass ratio formed a better intumescent flame‐retardant system and adequately exerted their synergistic effects. Furthermore, average effective combustion heat values revealed that EA/APP flame retardant possessed the gaseous‐phase flame‐retardant effect on PP. Residues of the EA/APP/PP composites were also investigated by scanning electron microscopy, Fourier‐transform infrared, and X‐ray photoelectron spectroscopy. Results demonstrated that the appropriate EA/APP mass ratio can fully interact and lock more chemical constituents containing carbon and nitrogen in the residue, thereby resulting in the formation of a dense, compact, and intumescent char layer. This char layer exerted a condensed‐phase flame‐retardant effect on EA/APP/PP composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41006.     

Synergistic flame retardant effects of ammonium polyphosphate in ethylene‐vinyl acetate/layered double hydroxides composites

Mg–Al–Fe ternary layered double hydroxides (LDH) were synthesized based on bayer red mud by calcination‐rehydration method, and characterized using X‐ray diffraction and thermogravimetric analysis (TGA). The synergistic flame retardant effects of ammonium polyphosphate (APP) with LDH in ethylene‐vinyl acetate (EVA) composites were studied using limiting oxygen index (LOI), UL 94 test, cone calorimeter test (CCT), and smoke density test (SDT). The thermal degradation behavior of EVA/LDH/APP composites was examined by thermal gravimetric analysis‐fourier transform infrared spectrometry (TG‐FTIR). The results showed that LOI values decreased by incorporation of APP together with LDH; and, a suitable amount of APP in EVA/LDH composites can apparently improve UL 94 rating. The CCT results indicated that heat release rate (HRR) of the EVA/LDH/APP composites with APP decreased in comparison with that of the EVA/LDH composites. The SDT results showed that APP was helpful to suppress smoke. The TG‐FTIR data showed that the composites with APP had a higher thermal stability than the EVA/LDH composites at high temperature. POLYM. ENG. SCI., 54:766–776, 2014. © 2013 Society of Plastics Engineers     

Smoke suppression,flame retardancy,and fire toxicity of polypropylene containing melamine salt of pentaerythritol phosphate halloysite

Polypropylene (PP) was melt blended with a new mono molecular intumescent flame retardant, melamine salt of pentaerythritol phosphate halloysite (MPPH) to enhance its thermal stability, flame retardancy, and smoke suppression properties. The structure of MPPH was elucidated by Fourier transform infrared (FTIR), ¹H NMR, X-ray diffraction (XRD), and energy dispersive X-ray (EDX) analysis. PP composites results showed that MPPH increased the thermal stability of PP at high temperatures in all PP composites. The horizontal flammability test (UL94H) showed that MPPH stopped flame propagation in PP composites. Vertical burning rate test (UL94V) revealed that PP composites can attain V₀ rating at loading levels 25, 30, and 35 wt.% of MPPH. Limiting oxygen index (LOI) data indicated that adding 20, 25, 30, and 35 wt.% of MPPH to PP increased the LOI value of PP (19.2%) to 27.1%, 32.5%, 35.4%, and 38.7%. MPPH succeeded in reducing the maximum specific optical density (Ds_max), mass specific optical density (MOD), and rate of smoke generation during the first 4 min (VOF4) of PP composites compared to PP alone. FTIR gas analyzer results revealed that MPPH decreased the emission of CO and CO₂ in the gas phase during the combustion process. Digital photos and scanning electron microscope (SEM) images of char residues remained after the smoke density test revealed that MPPH succeeded in forming a cellular and cohesive char layer on the PP surface. The new data is expected to increase the use of PP in rigid packaging applications.     

Microencapsulation of ammonium polyphosphate: Preparation,characterization, and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MCAPP) with a melamine–formaldehyde (MF) resin coating layer was prepared by in situ polymerization. MCAPP was characterized by Fourier transform infrared, X‐ray photoelectron spectroscopy, and so on. The results show that the microencapsulation with MF resin leads to a decrease in the particles' size and water absorption. The flame retardant action and mechanism of MCAPP and ammonium polyphosphate (APP) in polypropylene are studied using limiting oxygen index (LOI) and UL 94 test, and their thermal stability is evaluated by thermogravimetric analysis. The LOI value of the PP/MCAPP composite at 30 wt% loading is 30.5%, whereas the corresponding value of the PP/APP composite is only 20%. Moreover, the LOI values of the PP/MCAPP/PER composites are higher than the ones of the PP/APP/PER composites. In the UL 94 test, the PP/MCAPP/PER composites with suitable ratios of MCAPP to PER can reach the V‐0 rating, and the best rating of the PP/APP/PER composites is V‐1. V‐1. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

The flame retardant effect of aluminum phosphinate in combination with zinc borate,borophosphate, and nanoclay in polyamide‐6

The effect of zinc borate (ZnB), borophosphate (BPO₄), and organoclay were studied to improve the flame retardancy of polyamide‐6 composites containing organic phosphinates. The flame retardancy of polyamide‐6 composites was investigated using limiting oxygen index (LOI), Underwriters Laboratories (UL‐94) standard, thermogravimetric analysis, Fourier transform infrared spectroscopy, and mass loss calorimeter. The addition of 15 wt% aluminum phosphinate (AlPi) increased the LOI value from 22.5 to 29.5, and V0 rating was obtained from UL‐94 test. The addition of organoclay, ZnB, and borophosphate does not change the predominant gas phase mechanism of AlPi during LOI and UL‐94 tests. The addition of organoclay increased the condensed phase mechanism of AlPi physically by the protective effect of layered silicate, whereas the addition of ZnB increased the condensed phase mechanism of AlPi chemically by the formation of boron aluminum phosphate species deducted from mass loss calorimeter studies. Copyright © 2012 John Wiley & Sons, Ltd.     

Flammability and mechanical properties of wood flour‐filled polypropylene composites

Polypropylene (PP) composites filled with wood flour (WF) were prepared with a twin‐screw extruder and an injection‐molding machine. Three types of ecologically friendly flame retardants (FRs) based on ammonium polyphosphate were used to improve the FR properties of the composites. The flame retardancy of the PP/WF composites was characterized with thermogravimetric analysis (TGA), vertical burn testing (UL94‐V), and limiting oxygen index (LOI) measurements. The TGA data showed that all three types of FRs could enhance the thermal stability of the PP/WF/FR systems at high temperatures and effectively increase the char residue formation. The FRs could effectively reduce the flammability of the PP/WF/FR composites by achieving V‐0 UL94‐V classification. The increased LOI also showed that the flammability of the PP/WF/FR composites was reduced with the addition of FRs. The mechanical property study revealed that, with the incorporation of FRs, the tensile strength and flexural strength were decreased, but the tensile and flexural moduli were increased in all cases. The presence of maleic anhydride grafted polypropylene (MAPP) resulted in an improvement of the filler–matrix bonding between the WF/intumescent FR and PP, and this consequently enhanced the overall mechanical properties of the composites. Morphological studies carried out with scanning electron microscopy revealed clear evidence that the adhesion at the interfacial region was enhanced with the addition of MAPP to the PP/WF/FR composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Flammability and thermal degradation of epoxy acrylate modified with phosphorus‐containing compounds

A series of UV‐curable flame‐retardant resins was obtained by blending phosphate acrylate (BTP) in different ratios with epoxy acrylate resin (EA). The flammability was characterized by limiting oxygen index (LOI), UL 94 flammability rating and cone calorimeter, and the thermal degradation of the flame‐retardant resins was studied using thermo gravimetric analysis (TGA), and real‐time Fourier transform infrared (RTFTIR). The results indicated that the flame‐retardant efficiency increases with the addition of BTP. The heat release rate with the addition of BTP decreases greatly. The TGA data showed that EA/BTP blends have lower initial decomposition temperatures and higher char residues than pure EA, whereas BTP has the lowest initial decomposition temperature and the highest char residue. The RTFTIR study indicates that the EA/BTP blends have lower thermal oxidative stability than the pure EA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synergistic effect of kaolinite/halloysite on the flammability and thermostability of polypropylene

Kaolinite (Kaol) and halloysite nanotubes (HNT) are both aluminosilicate clays with similar chemical formulation and different microshapes. In this article, nanotubular HNT and nanoplate Kaol together were introduced into polypropylene (PP) containing intumescent flame retardant (IFR). The flammability of the PP composites was characterized by limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimeter tests (CCT). The results showed that for the composite with 75 wt % PP and 25 wt % IFR, its LOI was 31.0% and it obtained a UL‐94 grade of V‐2. For the composite of 75 wt % PP, 23.5 wt % IFR, and 1.5 wt % (Kaol/HNT = 9/1), its LOI increased to 36.9 and it obtained a UL‐94 grade of V‐0; at the same time, its peak heat release rate value in CCT decreased by 82.2% compared to neat PP. The thermostability analysis indicated that the mixture of Kaol/HNT could improve the thermostability and final char yield. The char residues were comprehensively analyzed by scanning electron microscopy and Fourier transform infrared spectroscopy. The results illustrated that the Kaol/HNT combination was beneficial to forming a crosslinked network and promoting formation of a compact char with higher strength. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46507.