建筑结构基于能量抗震设计方法研究

该文系统总结了建筑结构基于能量抗震设计方法的相关研究成果, 指出结构损伤耗能机制控制是确定结构累积耗能分布和实现基于能量抗震设计的关键. 分别针对钢支撑框架结构、RC框架结构和RC框-剪结构的合理耗能机制控制进行了研究. 在此基础上, 建立了基于能量抗震设计方法的实施框架, 并分别针对钢支撑框架结构、RC框架结构和RC框-剪结构给出了具体的基于能量抗震设计方法.     

Isogeometric FEM‐BEM coupled structural‐acoustic analysis of shells using subdivision surfaces

We introduce a coupled finite and boundary element formulation for acoustic scattering analysis over thin‐shell structures. A triangular Loop subdivision surface discretisation is used for both geometry and analysis fields. The Kirchhoff‐Love shell equation is discretised with the finite element method and the Helmholtz equation for the acoustic field with the boundary element method. The use of the boundary element formulation allows the elegant handling of infinite domains and precludes the need for volumetric meshing. In the present work, the subdivision control meshes for the shell displacements and the acoustic pressures have the same resolution. The corresponding smooth subdivision basis functions have the C¹ continuity property required for the Kirchhoff‐Love formulation and are highly efficient for the acoustic field computations. We verify the proposed isogeometric formulation through a closed‐form solution of acoustic scattering over a thin‐shell sphere. Furthermore, we demonstrate the ability of the proposed approach to handle complex geometries with arbitrary topology that provides an integrated isogeometric design and analysis workflow for coupled structural‐acoustic analysis of shells.     

Micromechanics of Amorphous Metal/Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects,Buckling Behavior,and Energy Absorption Capability

By designing advantageous cellular geometries and combining the material size effects at the nanometer scale, lightweight hybrid microarchitectured materials with tailored structural properties are achieved. Prior studies reported the mechanical properties of high strength cellular ceramic composites, obtained by atomic layer deposition. However, few studies have examined the properties of similar structures with metal coatings. To determine the mechanical performance of polymer cellular structures reinforced with a metal coating, 3D laser lithography and electroless deposition of an amorphous layer of nickel‐boron (NiB) is used for the first time to produce metal/polymer hybrid structures. In this work, the mechanical response of microarchitectured structures is investigated with an emphasis on the effects of the architecture and the amorphous NiB thickness on their deformation mechanisms and energy absorption capability. Microcompression experiments show an enhancement of the mechanical properties with the NiB thickness, suggesting that the deformation mechanism and the buckling behavior are controlled by the brittle‐to‐ductile transition in the NiB layer. In addition, the energy absorption properties demonstrate the possibility of tuning the energy absorption efficiency with adequate designs. These findings suggest that microarchitectured metal/polymer hybrid structures are effective in producing materials with unique property combinations.     

Materials Nanoarchitecturing via Cation‐Mediated Protein Assembly: Making Limpet Teeth without Mineral

Teeth are designed to deliver high forces while withstanding the generated stresses. Aside from isolated mineral‐free exception (e.g., marine polychaetes and squids), minerals are thought to be indispensable for tooth‐hardening and durability. Here, the unmineralized teeth of the giant keyhole limpet (Megathura crenulata) are shown to attain a stiffness, which is twofold higher than any known organic biogenic structures. In these teeth, protein and chitin fibers establish a stiff compact outer shell enclosing a less compact core. The stiffness and its gradients emerge from a concerted interaction across multiple length‐scales: packing of hydrophobic proteins and folding into secondary structures mediated by Ca²⁺ and Mg²⁺ together with a strong spatial control in the local fiber orientation. These results integrating nanoindentation, acoustic microscopy, and finite‐element modeling for probing the tooth's mechanical properties, spatially resolved small‐ and wide‐angle X‐ray scattering for probing the material ordering on the micrometer scale, and energy‐dispersive X‐ray scattering combined with confocal Raman microscopy to study structural features on the molecular scale, reveal a nanocomposite structure hierarchically assembled to form a versatile damage‐tolerant protein‐based tooth, with a stiffness similar to mineralized mammalian bone, but without any mineral.     

Atomic Layer Deposition for Membranes,Metamaterials, and Mechanisms

Bending and folding techniques such as origami and kirigami enable the scale‐invariant design of 3D structures, metamaterials, and robots from 2D starting materials. These design principles are especially valuable for small systems because most micro‐ and nanofabrication involves lithographic patterning of planar materials. Ultrathin films of inorganic materials serve as an ideal substrate for the fabrication of flexible microsystems because they possess high intrinsic strength, are not susceptible to plasticity, and are easily integrated into microfabrication processes. Here, atomic layer deposition (ALD) is employed to synthesize films down to 2 nm thickness to create membranes, metamaterials, and machines with micrometer‐scale dimensions. Two materials are studied as model systems: ultrathin SiO₂ and Pt. In this thickness limit, ALD films of these materials behave elastically and can be fabricated with fJ‐scale bending stiffnesses. Further, ALD membranes are utilized to design micrometer‐scale mechanical metamaterials and magnetically actuated 3D devices. These results establish thin ALD films as a scalable basis for micrometer‐scale actuators and robotics.     

The Application of Hollow Structured Anodes for Sodium‐Ion Batteries: From Simple to Complex Systems

Hollow structures exhibit fascinating and important properties for energy‐related applications, such as lithium‐ion batteries, supercapacitors, and electrocatalysts. Sodium‐ion batteries, as analogs of lithium‐ion batteries, are considered as promising devices for large‐scale electrical energy storage. Inspired by applications of hollow structures as anodes for lithium‐ion batteries, the application of these structures in sodium‐ion batteries has attracted great attention in recent years. However, due to the difference in lithium and sodium‐ion batteries, there are several issues that need to be addressed toward rational design of hollow structured sodium anodes. Herein, this research news article presents the recent developments in the synthesis of hollow structured anodes for sodium‐ion batteries. The main strategies for rational design of materials for sodium‐ion batteries are presented to provide an overview and perspectives for the future developments of this research area.     

敷设声学覆盖层的板架结构抗冲击性能数值计算研究

为提高潜艇的隐身性能,通常在潜艇非耐压壳板外表面敷设消声瓦,在耐压壳体的外表面敷设隔声去耦瓦,在耐压壳体内表面敷设"阻尼层"(以上三种结构统称为多种声学覆盖层);由于声学覆盖层含有空腔的特殊结构形式,该空腔结构形式在受到爆炸冲击波时,腔体将产生变形并吸收能量,这将严重影响潜艇的抗冲击性能。因此,针对敷设声学覆盖层的板架结构的吸能性能进行研究,找出了覆盖层空腔结构变形、速度及加速度与冲击波能量吸收之间的关系,得到敷设声学覆盖层板架结构的抗冲性能;并对声学覆盖层结构进行优化,在此基础上,给出兼具抗冲和隔振功能的声学覆盖层结构设计及性能参数的优化建议。     

A generalized frequency separation–strain energy damage function model for low cycle fatigue–creep life prediction

Fatigue–creep interaction is a key factor for the failures of many engineering components and structures under high temperature and cyclic loading. These fatigue–creep life prediction issues are significant in selection, design and safety assessments of those components. Based on the frequency‐modified Manson–Coffin equation and Ostergren's model, a new model for high temperature low cycle fatigue (HTLCF), a generalized frequency separation–strain energy damage function model is developed. The approach used in this model to reflect the effects of time‐dependent damaging mechanisms on HTLCF life is different from those used in all the earlier models. A new strain energy damage function is used to reduce the difference between the approximate strain energy and real strain energy absorbed during the damage process. This proposed model can describe the effects of different time‐dependent damaging mechanisms on HTLCF life more accurately than others. Comparing traditional frequency separation technique (FS) and strain energy frequency‐modified approach (SEFS), the proposed model is widely applicable and more precise in predicting the life of fatigue–creep interaction. Experimental data from existing literature are used to demonstrate the feasibility and applicability of the proposed model. A good agreement is found between the predicted results and experimental data.     

Parametric design sensitivity analysis of high‐frequency structural–acoustic problems using energy finite element method

A design sensitivity analysis of high‐frequency structural–acoustic problems is formulated and presented. The energy finite element method (EFEM) is used to predict structural–acoustic responses in the high frequency range, where the coupling between structural junctions and the structural–acoustic interface are modelled using power transfer coefficients. The continuum design sensitivity formulation is derived from the governing equation of EFEM and the discrete method is applied in the variation of the structural–structural and structural–acoustic coupling matrices. The direct differentiation and adjoint variable method are both developed for the sensitivity analysis, where the difficulty of the adjoint variable method is overcome by solving a transposed system equation. Parametric design variables such as panel thickness and material damping are considered for sensitivity analysis, and numerical sensitivity results show excellent agreement as compared to analytical finite difference results. Copyright © 2004 John Wiley & Sons, Ltd.     

Deep‐Subwavelength Holey Acoustic Second‐Order Topological Insulators

Higher‐order topological insulators (HOTIs) belong to a new class of materials with unusual topological phases. They have garnered considerable attention due to their capabilities in confining energy at the hinges and corners, which is entirely protected by the topology, and have thus become attractive structures for acoustic wave studies and control. However, for most practical applications at audible and low frequencies, compact and subwavelength implementations are desirable in addition to providing robust guiding of sound beyond a single‐frequency operation. Here, a holey HOTI capable of sustaining deeply confined corner states 50 times smaller than the wavelength is proposed. A remarkable resilience of these surface‐confined acoustic states against defects is experimentally observed, and topologically protected sound is demonstrated in three different frequency regimes. Concerning this matter, the findings will thus have the capability to push forward exciting applications for robust acoustic imaging way beyond the diffraction limit.     

Acoustic shape optimization using cut finite elements

Fictitious domain methods are attractive for shape optimization applications, since they do not require deformed or regenerated meshes. A recently developed such method is the CutFEM approach, which allows crisp boundary representations and for which uniformly well‐conditioned system matrices can be guaranteed. Here, we investigate the use of the CutFEM approach for acoustic shape optimization, using as test problem the design of an acoustic horn for favorable impedance‐matching properties. The CutFEM approach is used to solve the Helmholtz equation, and the geometry of the horn is implicitly described by a level‐set function. To promote smooth algorithmic updates of the geometry, we propose to use the nodal values of the Laplacian of the level‐set function as design variables. This strategy also improves the algorithm's convergence rate, counteracts mesh dependence, and, in combination with Tikhonov regularization, controls small details in the optimized designs. An advantage with the proposed method is that the exact derivatives of the discrete objective function can be expressed as boundary integrals, as opposed to when using a traditional method that uses mesh deformations. The resulting horns possess excellent impedance‐matching properties and exhibit surprising subwavelength structures, not previously seen, which are possible to capture due to the fixed mesh approach.     

Interface‐reduction for the Craig–Bampton and Rubin method applied to FE–BE coupling with a large fluid–structure interface

Component mode‐based model‐order reduction (MOR) methods like the Craig–Bampton method or the Rubin method are known to be limited to structures with small coupling interfaces. This paper investigates two interface‐reduction methods for application of MOR to systems with large coupling interfaces: for the Craig–Bampton method a direct reduction method based on strain energy considerations is investigated. Additionally, for the Rubin method an iterative reduction scheme is proposed, which incrementally constructs the reduction basis. Hereby, attachment modes are tested if they sufficiently enlarge the spanned subspace of the current reduction basis. If so, the m‐orthogonal part is used to augment the basis. The methods are applied to FE–BE coupled systems in order to predict the vibro‐acoustic behavior of structures, which are partly immersed in water. Hereby, a strong coupling scheme is employed, since for dense fluids the feedback of the acoustic pressure onto the structure is not negligible. For two example structures, the efficiency of the reduction methods with respect to numerical effort, memory consumption and computation time is compared with the exact full‐order solution. Copyright © 2008 John Wiley & Sons, Ltd.     

A numerical study on the generation of impulsive noise by complex flows discharging from a muzzle

A numerical study on impulsive noise generation produced by complex flows discharging from a muzzle is achieved and the basic structures generating impulsive noise are analyzed. Complex flow features by a muzzle flow and noise generation mechanisms by several sources of noise are discussed from numerical simulations. Two‐dimensional axisymmetric Euler equations are used for governing equations. High‐order dispersion relation preserving finite difference method and an optimized four‐level marching method are used for spatial discretization and time integration, respectively. In order to show the capability of this method to capture blast waves and to examine the basic generation mechanism of acoustic waves from a muzzle, the interaction between a shock/blast wave and a vortex ring is implemented. From the numerical simulation of the 7.62‐mm NATO rifle G3 with a DM‐41 round in the near field, complex blast waves, jet flow, various vortices and their interaction phenomena are described and noise generation mechanism due to the interaction of complex flow structures is observed. The present results demonstrate that numerical simulation using computational aeroacoustic methods provides not only a reliable way to determine the blast wave dynamics of the muzzle flow but also allows an opportunity to study the physics and detailed mechanisms of the noise generation and propagation due to the interaction of complex flow structures generated from a muzzle system. Copyright © 2008 John Wiley & Sons, Ltd.     

Computational structural and material stability analysis in finite electro‐elasto‐statics of electro‐active materials

Dielectric materials like electro‐active polymers (EAPs) exhibit coupled electro‐mechanical behavior at large strains. They respond by a deformation to an applied electrical field and are used in advanced industrial environments as sensors and actuators, for example, in robotics, biomimetics and smart structures. In field‐activated or electronic EAPs, the electric activation is driven by Coulomb‐type electrostatic forces, resulting in Maxwell stresses. These materials are able to provide finite actuation strains, which can even be improved by optimizing their composite microstructure. However, EAPs suffer from different types of instabilities. This concerns global structural instabilities, such as buckling and wrinkling of EAP devices, as well as local material instabilities, such as limit‐points and bifurcation‐points in the constitutive response, which induce snap‐through and fine scale localization of local states. In this work, we outline variational‐based definitions for structural and material stability, and design algorithms for accompanying stability checks in typical finite element computations. The formulation starts from stability criteria for a canonical energy minimization principle of electro‐elasto‐statics, and then shifts them over to representations related to an enthalpy‐based saddle point principle that is considered as the most convenient setting for numerical implementation. Here, global structural stability is analyzed based on a perturbation of the total electro‐mechanical energy, and related to statements of positive definiteness of incremental finite element tangent arrays. We base the local material stability on an incremental quasi‐convexity condition of the electro‐mechanical energy, inducing the positive definiteness of both the incremental electro‐mechanical moduli as well as a generalized acoustic tensor. It is shown that the incremental arrays to be analyzed in the stability criteria appear within the enthalpy‐based setting in a distinct diagonal form, with pure mechanical and pure electrical partitions. Applications of accompanying stability analyses in finite element computations are demonstrated by means of representative model problems. Copyright © 2015 John Wiley & Sons, Ltd.     

Scale‐related topology optimization of cellular materials and structures

The integrated optimization of lightweight cellular materials and structures are discussed in this paper. By analysing the basic features of such a two‐scale problem, it is shown that the optimal solution strongly depends upon the scale effect modelling of the periodic microstructure of material unit cell (MUC), i.e. the so‐called representative volume element (RVE). However, with the asymptotic homogenization method used widely in actual topology optimization procedure, effective material properties predicted can give rise to limit values depending upon only volume fractions of solid phases, properties and spatial distribution of constituents in the microstructure regardless of scale effect. From this consideration, we propose the design element (DE) concept being able to deal with conventional designs of materials and structures in a unified way. By changing the scale and aspect ratio of the DE, scale‐related effects of materials and structures are well revealed and distinguished in the final results of optimal design patterns. To illustrate the proposed approach, numerical design problems of 2D layered structures with cellular core are investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

How Does Graphene Grow? Easy Access to Well‐Ordered Graphene Films

The selective formation of large‐scale graphene layers on a Rh‐YSZ‐Si(111) multilayer substrate by a surface‐induced chemical growth mechanism is investigated using low‐energy electron diffraction, X‐ray photoelectron spectroscopy, X‐ray photoelectron diffraction, and scanning tunneling microscopy. It is shown that well‐ordered graphene layers can be grown using simple and controllable procedures. In addition, temperature‐dependent experiments provide insight into the details of the growth mechanisms. A comparison of different precursors shows that a mobile dicarbon species (e.g., C₂H₂ or C₂) acts as a common intermediate for graphene formation. These new approaches offer scalable methods for the large‐scale production of high‐quality graphene layers on silicon‐based multilayer substrates.     

Monitoring of scaling in dilute phase pneumatic conveying systems using non-intrusive acoustic sensors – A feasibility study

Scale formation in pneumatic conveying systems is a major industrial challenge. The underlying scale formation mechanisms can be intricate as they often involve a combination of several mutually enhancing binding forces and can be affected by a number of different factors. A non-intrusive monitoring technique capable of measuring scale growth would be a valuable tool to investigate different scaling mechanisms. In this study, the feasibility of an active acoustic sensor technique for monitoring of scale growth in a pneumatic conveying system is evaluated. Tests are performed in a pilot scale pneumatic conveying system transporting sand in dilute phase. The acoustic sensors conducts measurements on test pipes which are coated with a primer/powder mixture, one layer after the other, to simulate scale progression. Reference measurements of the coating layer thickness in the test pipes are obtained by a laser imaging technique for each added coating layer. A multivariate method is used to calibrate prediction models of the scale thickness using acoustic measurements as independent variables and the reference measurements as the dependent variable. Results show that the active monitoring method is capable of monitoring scale growth in pneumatic conveying systems and that dilute phase conveying of sand does not affect the precision of predictions made by the method.     

Qualitative properties of optimum acoustic structures

Problems of optimum synthesis of layered structures exposed to acoustic waves are investigated. Qualitative laws governing the interrelationship between the parameters in structures that realize the limiting possibilities for control of the energy characteristics of acoustic waves are established. A numerical example is given. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 71, No. 5, pp. 902–905, September–October, 1998.     

Joint Charge Storage for High‐Rate Aqueous Zinc–Manganese Dioxide Batteries

Aqueous rechargeable zinc–manganese dioxide batteries show great promise for large‐scale energy storage due to their use of environmentally friendly, abundant, and rechargeable Zn metal anodes and MnO₂ cathodes. In the literature various intercalation and conversion reaction mechanisms in MnO₂ have been reported, but it is not clear how these mechanisms can be simultaneously manipulated to improve the charge storage and transport properties. A systematical study to understand the charge storage mechanisms in a layered δ‐MnO₂ cathode is reported. An electrolyte‐dependent reaction mechanism in δ‐MnO₂ is identified. Nondiffusion controlled Zn²⁺ intercalation in bulky δ‐MnO₂ and control of H⁺ conversion reaction pathways over a wide C‐rate charge–discharge range facilitate high rate performance of the δ‐MnO₂ cathode without sacrificing the energy density in optimal electrolytes. The Zn‐δ‐MnO₂ system delivers a discharge capacity of 136.9 mAh g^?1 at 20 C and capacity retention of 93% over 4000 cycles with this joint charge storage mechanism. This study opens a new gateway for the design of high‐rate electrode materials by manipulating the effective redox reactions in electrode materials for rechargeable batteries.