Synthesis of biodegradable amino‐acid‐based poly(ester amide)s and poly(ether ester amide)s with pendant functional groups

A new family of biodegradable amino‐acid‐based poly(ester amide)s (AA–PEAs) and amino‐acid‐based poly(ether ester amide)s (AA–PEEAs) consisting of reactive pendant functional groups (? COOH or ? NH₂) were synthesized from unsaturated AA–PEAs and AA–PEEAs via a thiol–ene reaction in the presence of a radical initiator (2,2′‐azobisisobutyronitrile). The synthetic method was a one‐step reaction with near 100% yields under mild reaction conditions. The resulting functional AA–PEA and AA–PEEA polymers were characterized by Fourier transform infrared spectroscopy, NMR, and differential scanning calorimetry. These new functional AA–PEA and AA–PEEA derivatives had lower glass‐transition temperatures than the original unsaturated AA–PEA and AA–PEEA polymers, and their solubility in some organic solvents also improved. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(ether amide ether ketone)/poly(ether ketone ketone) copolymers

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐m‐phenylenediamine (BPPD), was prepared by condensation of m‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). A series of novel poly(ether amide ether ketone) (PEAEK)/poly(ether ketone ketone) (PEKK) copolymers were synthesized by the electrophilic Friedel‐Crafts solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of diphenyl ether (DPE) and BPPD, over a wide range of DPE/BPPD molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influence of reaction conditions on the preparation of copolymers was examined. The copolymers obtained were characterized by different physicochemical techniques. The copolymers with 10–25 mol % BPPD were semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide linkages in the main chains. The copolymers III and IV with 20–25 mol % BPPD had not only high T_gs of 184–188°C, but also moderate T_ms of 323–344°C, having good potential for the melt processing. The copolymers III and IV had tensile strengths of 103.7–105.3 MPa, Young's moduli of 3.04–3.11 GPa, and elongations at break of 8–9% and exhibited outstanding thermal stability and good resistance to organic solvents. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on the biodegradation and biocompatibility of a new poly(ester amide) derived from L-alanine

A new poly(ester amide) derived from L -alanine has been synthesized and characterized. The polymer has good fiber- and film-forming properties, as well as other characteristics like thermal stability and solubility in chloroform, which enhance its processing facilities. Degradation studies show that both pH and temperature influence in the hydrolisis rate that takes mainly place through the ester linkages. Degradation was also studied by using different enzymes. Results indicated that papain was the most efficient of these, and that the hydrolysis to water-soluble products could be attained in a few days. Basal cytotoxicity was assayed using a mouse L929 fibroblast permanent cell line. The MTT viability test was performed with liquid extract of the material (50 days, 37°C). An attachment and proliferation screening study with intact material was also carried out. No cytotoxic responses were detected, in either assay, after a 24- and 48-h incubation period with the cells. After 72 h a slight cytotoxicity was detected in the polymer material, while a more significant one was detected in the material extract. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1537–1549, 1998     

Synthesis and properties of copolymers of poly(ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

Poly(aryl ether ketone)s (PAEKs) are a class of high‐performance engineering thermoplastics known for their excellent combination of chemical, physical and mechanical properties, and the synthesis of semicrystalline PAEKs with increased glass transition temperatures (T_g) is of much interest. In the work reported, a series of novel copolymers of poly(ether ketone ketone) (PEKK) and poly(ether amide ether amide ether ketone ketone) were synthesized by electrophilic solution polycondensation of terephthaloyl chloride with a mixture of diphenyl ether and N,N′‐bis(4‐phenoxybenzoyl)‐4,4′‐diaminodiphenyl ether (BPBDAE) under mild conditions. The copolymers obtained were characterized using various physicochemical techniques. The copolymers with 10–35 mol% BPBDAE are semicrystalline and have markedly increased T_g over commercially available poly(ether ether ketone) and PEKK due to the incorporation of amide linkages in the main chain. The copolymers with 30–35 mol% BPBDAE not only have high T_g of 178–186 °C, but also moderate melting temperatures of 335–339 °C, having good potential for melt processing. The copolymers with 30–35 mol% BPBDAE have tensile strengths of 102.4–103.8 MPa, Young's moduli of 2.33–2.45 GPa and elongations at break of 11.7–13.2%, and exhibit high thermal stability and good resistance to organic solvents. Copyright © 2010 Society of Chemical Industry     

Synthesis, characterization and biodegradation of poly(ester amide)s based hydrogels

A series of new biodegradable hybrid hydrogels were designed and fabricated from a new family of amino acid-based functional poly(ester amide) (PEA-AG) and commercial poly(ethylene glycol) diacrylate (PEG-DA) or Pluronic diacrylate (Pluronic-DA) by UV photocrosslinking. These biodegradable hybrid hydrogels were characterized in terms of equilibrium swelling ratio (Q_eq), compression modulus by dynamic mechanical analysis (DMA), and interior morphology by scanning electron microscope (SEM). Both the precursors’ chemical structures and feed ratio had significant effect on the properties of the hybrid hydrogels. All these hybrid hydrogels had a three-dimensional porous network structure. The hydrophobicity, crosslinking density and mechanical strength of the hybrid hydrogels increased with an increase in allylglycine (AG) content in the PEA-AG, but the swelling and pore size of the hybrid hydrogels decreased. The biodegradation rate of these hybrid hydrogels in an enzyme (α-chymotrypsin) solution was faster than in a pure PBS buffer control, and the biodegradation rate increased with an increase in α-chymotrypsin concentration and allylglycine content.     

含醚基及氰侧基的聚芳酰胺的合成与表征

以二甲基乙酰胺为溶剂,叔胺为盐酸吸收剂,将4,4′-二氨基二苯醚与2,6-二(4-氯甲酰苯氧基)苯甲腈进行低温缩聚反应,合成含氰侧基及醚基结构的聚芳酰胺。结果表明:当反应体系摩尔浓度为0.45～0.55mol/L,初始反应温度为0℃,以2-甲基吡啶为盐酸吸收剂时,制得的聚芳酰胺相对分子质量较高,该聚合物热分解温度(失重5%)为419℃。     

Synthesis of poly(ether amide)s from p‐xylylene glycol and bis(ether nitrile)s

BACKGROUND: Poly(ether amide)s have been well studied in terms of improving the physical and thermal properties of aromatic polyamides. Poly(ether amide)s of high enough molecular weight to be useful for industrial purposes are generally difficult to prepare. The objective of this project was to introduce a simple and commercially feasible process to prepare poly(ether amide)s by a polymerization reaction at relatively low temperature. RESULTS: A series of poly(ether amide)s were prepared by direct polyamidation of p‐xylylene glycol with bis(ether nitrile)s via the Ritter reaction using concentrated H₂SO₄ in acetic acid. The synthesized poly(ether amide)s showed good solubility in polar aprotic solvents. The resultant poly(ether amide)s had inherent viscosities in the range 0.36–1.03 dL g^?1. The glass transition temperatures of the poly(ether amide)s were determined using differential scanning calorimetry to be in the range 190–258 °C. Thermogravimetric analysis data for these polymers indicated the 10% weight loss temperatures to be in the range 290–390 °C in nitrogen atmosphere. CONCLUSION: The Ritter reaction was applied for the synthesis of a variety of poly(ether amide)s with moderate to high molecular weights. This procedure provides a simple polymerization process for the convenient preparation of poly(ether amide)s in high yield at room temperature. Copyright © 2009 Society of Chemical Industry     

聚丙烯/聚醚酯酰胺共混纤维的研制

用聚乙二醇与己二酸反应合成聚醚酯,再用聚醚酯与己内酰胺反应得到聚醚酯酰胺。将聚醚酯酰胺与聚丙烯共混并纺丝得到聚丙烯/聚醚酯酰胺共混纤维;研究了聚醚酯与聚醚酯酰胺的结构和热性质;考察了共混纤维性能。结果表明:聚醚酯含量增加,聚醚酯酰胺的熔点下降,结晶温度升高;共混纤维的抗静电性和回潮率随聚醚酯酰胺含量和聚醚酯含量的增加而增强;共混纤维有很好的可染性,但强度略低。     

Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments

High molecular weight segmented poly(ester amide)s were prepared by melt polycondensation of 1,4-butanediol, dimethyl adipate and a preformed bisamide-diol based on 1,4-diaminobutane and ε-caprolactone. By varying the ratio of the bisamide-diol and 1,4-butanediol, a series of polymers was obtained with a hard segment content between 10 and 85 mol%. FT-IR and WAXD analysis revealed that the poly(ester amide)s crystallize in an α-type phase similar to the α-phase of even-even nylons. These polymers all have a micro-phase separated structure with an amide-rich hard phase and an ester-rich flexible soft phase. The polymers have a low and a high melt transition, corresponding with the melting of crystals comprising single ester amide sequences and two or more ester amide sequences, respectively. The low melt transition is between 58 and 70 °C and is independent of polymer composition. By increasing the hard segment content from 10 to 85 mol% the high melt transition increased from 83 to 140 °C while the glass transition temperature increased from −45 to −5 °C. Likewise, the elastic modulus increased from 70 to 524 MPa, the stress at break increased from 8 to 28 MPa while the strain at break decreased from 820 to 370%. Thermal and mechanical properties can thus be tuned for specific applications by varying the hard segment content in these segmented polymers.     

Biodegradable polymers based on renewable resources. V. Synthesis and biodegradation behavior of poly(ester amide)s composed of 1,4:3,6‐dianhydro‐D‐glucitol, α‐amino acid,and aliphatic dicarboxylic acid units

A series of poly(ester amide)s were synthesized by solution polycondensations of various combinations of p‐toluenesulfonic acid salts of O,O′‐bis(α‐aminoacyl)‐1,4:3,6‐dianhydro‐D ‐glucitol and bis(p‐nitrophenyl) esters of aliphatic dicarboxylic acids with the methylene chain lengths of 4–10. The p‐toluenesulfonic acid salts were obtained by the reactions of 1,4:3,6‐dianhydro‐D ‐glucitol with alanine, glycine, and glycylglycine, respectively, in the presence of p‐toluenesulfonic acid. The polycondensations were carried out in N‐methylpyrrolidone at 40°C in the presence of triethylamine, giving poly(ester amide)s having number‐average molecular weights up to 3.8 × 10⁴. Their structures were confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Most of these poly(ester amide)s are amorphous, except those containing sebacic acid and glycine or glycylglycine units, which are semicrystalline. All these poly(ester amide)s are soluble in a variety of polar solvents such as dimethyl sulfoxide, N,N‐dimethylformamide, 2,2,2‐trifluoroethanol, m‐cresol, pyridine, and trifluoroacetic acid. Soil burial degradation tests, BOD measurements in an activated sludge, and enzymatic degradation tests using Porcine pancreas lipase and papain indicated that these poly(ester amide)s are biodegradable, and that their biodegradability markedly depends on the molecular structure. The poly(ester amide)s were, in general, degraded more slowly than the corresponding polyesters having the same aliphatic dicarboxylic acid units, both in composted soil and in an activated sludge. In the enzymatic degradation, some poly(ester amide)s containing dicarboxylic acid components with shorter methylene chain lengths were degraded more readily than the corresponding polyesters with Porcine pancreas lipase, whereas most of the poly(ester amide)s were degraded more rapidly than the corresponding polyesters with papain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2721–2734, 2001     

含锌聚醚酯酰胺的热性能研究

以氧化锌、脂肪族二羧酸、聚乙二醇为原料合成含锌聚醚酯(PEEM),再将PEEM与聚己内酰胺低聚合物反应,制备含锌聚醚酯酰胺(PEEAM),借助差示扫描量热法(DSC)、热重(TG)分析,研究了PEEAM的热性能。结果表明:PEEAM呈双熔融和双结晶峰,随PEEM含量增加,PEEAM中PEEM链段的熔融温度降低,熔融热焓增大,聚酰胺链段的熔融温度略有下降,结晶放热和结晶温度随PEEM含量变化有最小值;PEEAM中含脂肪族二羧酸种类不同,其相应的熔融温度、熔融热焓、结晶温度及结晶放热不同,没有明显规律可循。脂肪族二羧酸种类对PEEAM的初始降解温度和最大质量损失温度没有明显影响。PEEM含量增大,PEEAM的热失重速率增大。     

Synthesis and characterization of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups

A new diamine monomer, 1,4-bis(4-aminophenoxycarbonyl)-2-(4-trifluoromethylphenoxy)benzene containing the trifluoromethyl and ester groups, was prepared from 2-(4-trifluoromethylphenoxy)terephthalyol chloride and 4-nitrophenol in two steps. Then, a series of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups with inherent viscosities of 0.51–1.14 dL/g have been prepared by low-temperature solution polycondensation from this diamine with various aromatic diacid chlorides. All the poly(ester amide)s are amorphous and readily soluble in many organic solvents such as N,N-dimethylacetamide (DMAC) and dimethyl sulfoxide. Tough and flexible polymer films cast from DMAc solutions have tensile strengths of 89–114 MPa, elongations at break of 5.8–8.8%, and initial moduli of 2.2–3.2 GPa. These poly(ester amide)s show glass transition temperatures between 166 and 256°C, 10% weight loss temperatures ranging from 395 to 445°C, and char yields higher of 46–56% at 800°C in nitrogen, and also exhibit low dielectric constants ranging from 3.31 to 3.52 (1 MHz), and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 362–380 nm range. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and properties of new thermally stable poly(ether imide amide)s

2,6‐Bis(4‐aminophenoxy)pyridine was prepared via reaction of 4‐aminophenol with 2,6‐dichloropyridine in the presence of potassium carbonate. Reaction of the diamine with two mol of trimellitic anhydride afforded a diacid with preformed imide structures. Poly(ether imide amide)s were prepared by polycondensation reactions of the diacid with different diamines in the presence of triphenyl phosphite. All the monomers and polymers were fully characterized and the physical properties of the polymers including solution viscosity, thermal stability, thermal behavior and solubility were studied. Thermal analysis data showed the polymers to have high thermal stability. Copyright © 2004 Society of Chemical Industry     

Synthesis of unsaturated poly(ether amide)s based on amine‐terminated poly(ethylene glycol)

Novel water‐soluble unsaturated poly(ether amide)s (PEAs) were synthesized by low‐temperature polycondensation of fumaryl chloride and amine‐terminated poly(ethylene glycol) (Jeffamine®). The unsaturated copolymers were further chemically modified with thiols to provide reactive pendant functional groups. Hydrogels based on these copolymers were prepared by copolymerization of the PEA with N‐vinyl pyrrolidone exposure to ultraviolet (UV) irradiation. The resulting hydrogels exhibited a high swelling ratio, and the magnitude of swelling depended on the molecular weight of Jeffamine®. The swelling ratio and equilibrium water content tended to increase with increasing chain length of the Jeffamine® used in copolymer synthesis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 913–920, 1999     

以季戊四醇为核的超支化不饱和聚酰胺酯的合成

以顺丁烯二酸酐（MA）和二乙醇胺（DEA）为原料合成超支化不饱和聚酰胺酯AB2型单体。通过季戊四醇和AB2型单体进行酯化反应合成支化不饱和聚酰胺酯HBP。考查了反应温度、催化剂用量、反应时间对反应产率的影响。最佳工艺条件为：温度140℃,反应时间5h,催化剂对甲苯磺酸用量为反应物量的1.5%。     

Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and characterization of a new family of cationic amino acid‐based poly(ester amide)s and their biological properties

A new family of positively charged and water soluble amino acid‐based poly(ester amide)s (PEAs) consisting of nontoxic L ‐arginine, diols, and aliphatic dicarboxylic acids building blocks was synthesized and characterized. The L ‐arginine based PEAs (Arg‐PEAs) were prepared by a solution polycondensation of two monomers: tetra‐p‐toluenesulfonic acids salts or hydrochloride acid salts of bis‐(L ‐arginine) α, ω‐alkylene diesters (monomer II ), and di‐p‐nitrophenyl esters of saturated or unsaturated dicarboxylic acids (monomer I ). Optimal reaction conditions were studied as functions of type of solvents and acid acceptors, concentrations of reactants. The molecular weights (M_n and M_w) of Arg‐PEAs measured by GPC ranged from 20,000 to 60,000 g mol^?1 with a rather narrow molecular weight distribution below 1.5. The chemical structures were confirmed by IR and NMR spectra. Arg‐PEAs obtained were all amorphous materials with T_g from 33 to 125°C, depending on the number and the type (saturated vs. unsaturated) of methylene groups in diols or diacids, and the type of counter‐ions attached to the guanidine group of the Arg‐based PEAs. The Arg‐PEAs had a high solubility in all polar solvents, including water. Preliminary studies of cell morphology and DNA capture capability of Arg‐PEAs indicated that this new family of cationic PEAs was nontoxic and more biocompatible than a commercial transfection agent (Superfect®), and can successfully capture plasma DNA. The strong positive charge of Arg‐PEAs as well as their good water solubility could provide unique characteristics for potential gene transfection or other charge preferred biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and evaluation of biodegradable segmented multiblock poly(ether ester) copolymers for biomaterial applications

Based on 1,4‐succinic acid, 1,4‐butanediol, poly(ethylene glycol)s and dimethyl terephthalate, biodegradable segmented multiblock copolymers of poly[(butylene terephthalate)‐co‐poly(butylene succinate)‐block‐poly(ethylene glycol)] (PTSG) were synthesized with different poly(butylene succinate) (PBS) molar fractions and varying the poly(ethylene glycol) (PEG) segment length, and were evaluated as biomedical materials. The copolymer extracts showed no in vitro cytotoxicity. However, sterilization of the copolymers by gamma irradiation had some limited effect on the cytotoxicity and mechanical properties. A copolymer consisting of PEG‐1000 and 20 mol% PBS, assigned as 1000PBS20 after SO₂ gas plasma treatment, sustained the adhesion and growth of dog vascular smooth muscle cells. The in vivo biocompatibility of this sample was also measured subcutaneously in rats for 4 weeks. The assessments indicated that these poly(ether ester) copolymers are good candidates for anti‐adhesion barrier and drug controlled‐release applications. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of poly(ester ether siloxane)s

A series of novel thermoplastic elastomers based on ABA‐type triblock prepolymers, poly[(propylene oxide)–(dimethylsiloxane)–(propylene oxide)] (PPO‐PDMS‐PPO), as the soft segments, and poly(butylene terephthalate) (PBT), as the hard segments, was synthesized by catalyzed two‐step melt transesterification of dimethyl terephthalate (DMT) with 1,4‐butanediol (BD) and α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) (M?_n = 2930 g mol^?1). Several copolymers with a content of hard PBT segments between 40 and 60 mass% and a constant length of the soft PPO‐PDMS‐PPO segments were prepared. The siloxane‐containing triblock prepolymer with hydrophilic terminal PPO blocks was used to improve the compatibility between the polar comonomers, i.e. DMT and BD, and the non‐polar PDMS segments. The structure and composition of the copolymers were examined using ¹H NMR spectroscopy, while the effectiveness of the incorporation of α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) prepolymer into the copolyester chains was controlled by chloroform extraction. The effect of the structure and composition of the copolymers on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as on the degree of crystallinity, and some rheological properties, were studied. Copyright © 2006 Society of Chemical Industry     

Blends of poly(ether imide) and an aromatic poly(ether amide): Phase behavior and CO2 transport properties

Blends of poly(ether imide) (PEI, Ultem 1000) and an aromatic poly(ether amide) were studied. Although homogeneous or heterogeneous blends can be obtained depending on the blend preparation method, the inherent miscibility of the mixture was finally established. The so-called enthalpy relaxation method was used to detect one or two glass transition temperatures in the blends in spite of the similarity of the pure component transitions. Fourier transform infrared analysis provided additional evidence of the specific interactions, which could be in the origin of the miscibility. A preliminary study of the influence of the homogeneity level in the transport properties of the blend films was also undertaken. Carbon dioxide at 1 bar was used as a penetrant. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 2141–2149, 1998