一种基于AND-LUT的混合FPGA结构

提出了一种混合FPGA新结构--新颖的AND-LUT阵列结构.其创新之处在于由可编程逻辑簇(Cluster)和相关的连接盒(CB)组成的可编程逻辑单元片(Tile)可以根据应用需要灵活地配置成PLA或LUT,前者较适合于高扇入逻辑,后者较适合于低扇入逻辑.因此,结合两者优点的新颖AND-LUT阵列结构在实现各种输入的用户逻辑时都能保持很好的逻辑利用率.MCNC电路测试结果进一步表明,同一逻辑电路在文中提出的混合FPGA新结构中实现与在基于LUT的对称FPGA结构中实现相比,面积平均可节省46%,因而大大提高了FPGA器件的逻辑利用率.     

一种基于AND-LUT的混合FPGA结构

提出了一种混合FPGA新结构--新颖的AND-LUT阵列结构.其创新之处在于由可编程逻辑簇(Cluster)和相关的连接盒(CB)组成的可编程逻辑单元片(Tile)可以根据应用需要灵活地配置成PLA或LUT,前者较适合于高扇入逻辑,后者较适合于低扇入逻辑.因此,结合两者优点的新颖AND-LUT阵列结构在实现各种输入的用户逻辑时都能保持很好的逻辑利用率.MCNC电路测试结果进一步表明,同一逻辑电路在文中提出的混合FPGA新结构中实现与在基于LUT的对称FPGA结构中实现相比,面积平均可节省46%,因而大大提高了FPGA器件的逻辑利用率.     

A reconfigurable 8 GOP ASIC architecture for high-speed datacommunications

A flexible and reconfigurable signal processing ASIC architecture has been developed, simulated, and synthesized. The proposed architecture compares favorably to classical DSP and FPGA solutions. It differs from general-purpose reconfigurable computing (RC) platforms by emphasizing high-speed application-specific computations over general-purpose flexibility. The proposed architecture can he used to realize any one of several functional blocks needed for the physical layer implementation of data communication systems operating at symbol rates in excess of 125 Msymbols/s. Multiple instances of a chip based on this architecture, each operating in a different mode, can be used to realize the entire physical layer of high-speed data communication systems. The architecture features the following modes (functions): real and complex FIR/IIR filtering, least mean square (LMS)-based adaptive filtering, discrete Fourier transforms (DFT), and direct digital frequency synthesis (DDFS) at up to 125 Msamples/s. All of the modes are mapped onto a common, regular data path with minimal configuration logic and routing. Multiple chips operating in the same mode can be cascaded to allow for larger blocks     

Low energy and area efficient quaternary multiplier with carbon nanotube field effect transistors

In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current best-performing techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.     

Configurable memristive logic block for memristive-based FPGA architectures

This article proposes a Configurable Memristive Logic Block (CMLB) that comprises of novel memristive logic cells. The memristive logic cells are constructed from memristive D flip-flop, 6-bit non-volatile look-up table (NVLUT), and multiplexers. The memristive logic cells are interconnected using memristive switch matrix cells to form the CMLB. The CMLB is then used to construct a memristor-based FPGA architecture. The proposed CMLB shows a reduction of 8.6% of device area and 1.094 times lesser critical path delay against the SRAM-based FPGA architecture. Against similar CMOS-based circuits, the memristive D flip-flop provides switching speed of 1.08 times faster, the NVLUT reduces power consumption by 6.25 nW, and the memristive logic cells reduce device area by 60.416 µm². In this research work also, various memristor-based FPGA architectures found in the literature are compared against the SRAM-based FPGA architecture.     

Low Complexity Reconfigurable DSP Circuit Implementations Based on Common Sub-expression Elimination

A design technique based on a combination of Common Sub-Expression Elimination and Bit-Slice (CSE-BitSlice) arithmetic for hardware and performance optimization of multiplier designs with variable operands is presented in this paper. The CSE-BitSlice technique can be extended to hardware optimization of multiplier circuits operating on vectors or matrices of variables. The CSE-BitSlice technique has been applied to the design and implementation of 12 × 12 and 42 × 42 bit real multipliers, a complex multiplier, a 6-tap FIR filter, and a 5-point DFT circuit. For comparison purposes, circuit implementations of the same arithmetic and DSP functions have been carried out using Radix-4 Booth and CSA algorithms. Simulation results based on implementations using the Xilinx FPGA 5VLX330FF1760-2 device shows that the circuits based on the CSE-BitSlice techniques require fewer logic resources and yield higher throughput as compared to the CSA and Radix-4 Booth based circuits.     

一种基于多值RRAM的快速逻辑电路

针对移动物联网设备,提出一种基于多值RRAM的快速逻辑电路,以实现非易失性存储与快速逻辑运算。利用RRAM多值存储特性,采用Crossbar结构,实现了简单快速的译码器与高存储密度查找表,使逻辑电路具有较快的运算速度和较小的面积。基于该结构实现了4位、8位和16位的乘法器,其外围电路采用SMIC 65 nm CMOS工艺实现,而其核心多值RRAM则采用Verilog-A 模型模拟。仿真结果表明,与传统CMOS逻辑电路相比,基于多值RRAM的16位乘法器的速度提高了35.7%,面积减少了14%。     

Circuits and architectures for field programmable gate array with configurable supply voltage

Field programmable gate arrays (FPGAs) with supply voltage (Vdd) programmability have been proposed recently to reduce FPGA power, where the Vdd-level can be customized for FPGA circuit elements and unused circuit elements can be power-gated. In this paper, we first design novel Vdd-programmable and Vdd-gateable interconnect switches with minimal number of configuration SRAM cells. We then evaluate Vdd-programmable FPGA architectures using the new switches. The best architecture in our study uses Vdd-programmable logic blocks and Vdd-gateable interconnects. Compared to the baseline architecture similar to the leading commercial architecture, our best architecture reduces the minimal energy-delay product by 54.39% with 17% more area and 3% more configuration SRAM cells. Our evaluation results also show that LUT size 4 gives the lowest energy consumption, and LUT size 7 leads to the highest performance, both for all evaluated architectures.     

基于测试系统的FPGA逻辑资源的测试

FPGA在许多领域已经得到广泛应用,其测试问题也显得越来越突出。文章针对基于SRAM结构FPGA的特点,以Xilinx公司的XC4000系列芯片为例,利用检测可编程逻辑资源的多逻辑单元(CLB)混合故障的测试方法,阐述了如何在BC3192V50测试系统上实现FPGA的在线配置以及功能和参数测试。它是一种基于测试系统的通用的FPGA配置和测试方法。     

Functional Demonstration of a Memristive Arithmetic Logic Unit (MemALU) for In‐Memory Computing

The development of in‐memory computing has opened up possibilities to build next‐generation non‐von‐Neumann computing architecture. Implementation of logic functions within the memristors can significantly improve the energy efficiency and alleviate the bandwidth congestion issue. In this work, the demonstration of arithmetic logic unit functions is presented in a memristive crossbar with implemented non‐volatile Boolean logic and arithmetic computing. For logic implementation, a standard operating voltage mode is proposed for executing reconfigurable stateful IMP, destructive OR, NOR, and non‐destructive OR logic on both the word and bit lines. No additional voltages are needed beyond “V_P” and its negative component. With these basic logic functions, other Boolean functions are constructed within five devices in at most five steps. For arithmetic computing, the fundamental functions including an n‐bit full adder with high parallelism as well as efficient increment, decrement, and shift operations are demonstrated. Other arithmetic blocks, such as subtraction, multiplication, and division are further designed. This work provides solid evidence that memristors can be used as the building block for in‐memory computing, targeting various low‐power edge computing applications.     

适用于数据通路的可编程逻辑器件FDP100K

设计研制了一款适用于数据通路的10万门容量的FPGA器件FDP100K(FDP:FPGA for Data-Path),其主要特点为:可编程逻辑单元结构不同于国际上已有的可编程逻辑单元结构,是一种新颖的基于查询表LUT和多路选择器MUX的混合结构;连线资源结构采用新颖的层次式布线结构,提供高度灵活的布线能力.芯片采用SMIC 0.35 μm CMOS工艺,包含1024个可编程逻辑单元和128个可编程IO单元.芯片配合自主开发的软件系统FDE(FPGA Development Environment)进行测试,结果表明:FDP100K芯片的可编程逻辑单元功能正常;芯片的各种连线资源功能正常;可以准确地实现数据通路型电路和其他类型的电路的功能.     

FPGA vs. ASIC for low power applications

Field Programmable Gate Array (FPGA) are becoming more and more popular and are used in many applications. However, it is well known that the performance is limited comparing to full ASIC implementation, but for many applications the speed requirements fit the ones provided already by existing FPGA circuits. Power consumption seems to be one of the most important limiting factor and so far it is in favour of Application Specific Integrated Circuits (ASIC) [Varghese Georges, Jan M. Rabaey, Low-Energy FPGA, Architecture and Design, Kluwer Academic Publishers, 2001; Tadahiro Kuroda, Power-Aware Electronics: Challenges and Opportunities, Tutorial at FTFC 2003, Paris, May 2003]. In this paper, we will present results obtained by characterizing various circuits implemented using both FPGA and ASIC technologies in order to determine the power consumption ratio and evaluate the efficiency of the power optimization techniques such as clock gating [Amara AMARA, Philippe Royannez, VHDL for Low Power, (Chapter 11), Low Power Electronics Design, Edited by Christian Piguet, CRC Press 2005; Luca Benini, Giovanni De Micheli, Dynamic Power Management, Kluwer Academic Publishers, 1998].We have started a study in order to compare the power consumption of two Intellectual Property (IP), a counter circuit and an image transform circuit. Both circuits have been implemented using FPGA Family circuits from ALTERA and Hardware Copy of the circuits which are close to the ASIC implementation. A full ASIC implementation using UMC 0.13 μm have be also characterized in terms of power.FPGA power consumption estimation flow is based on ALTERA tools (QuartusII) that provide accurate overall power consumption for a set of input stimuli, on various targets: FPGA families and Hardware Copy. ASIC power consumption estimation flow is based on Synopsys Power tools.     

A Low Power 16‐Bit RISC Microprocessor Using ECRL Circuits

This paper presents a low power 16‐bit adiabatic reduced instruction set computer (RISC) microprocessor with efficient charge recovery logic (ECRL) registers. The processor consists of registers, a control block, a register file, a program counter, and an arithmetic and logical unit (ALU). Adiabatic circuits based on ECRL are designed using a 0.35 µm CMOS technology. An adiabatic latch based on ECRL is proposed for signal interfaces for the first time, and an efficient four‐phase supply clock generator is designed to provide power for the adiabatic processor. A static CMOS processor with the same architecture is designed to compare the energy consumption of adiabatic and non‐adiabatic microprocessors. Simulation results show that the power consumption of the adiabatic microprocessor is about 1/3 compared to that of the static CMOS microprocessor.     

Architecture of field-programmable gate arrays

A survey of field-programmable gate array (FPGA) architectures and the programming technologies used to customize them is presented. Programming technologies are compared on the basis of their volatility, size parasitic capacitance, resistance, and process technology complexity. FPGA architectures are divided into two constituents: logic block architectures and routing architectures. A classification of logic blocks based on their granularity is proposed, and several logic blocks used in commercially available FPGAs are described. A brief review of recent results on the effect of logic block granularity on logic density and performance of an FPGA is then presented. Several commercial routing architectures are described in the context of a general routing architecture model. Finally, recent results on the tradeoff between the flexibility of an FPGA routing architecture, its routability, and its density are reviewed     

Efficient Implementations for AES Encryption and Decryption

This paper proposes two efficient architectures for hardware implementation of the Advanced Encryption Standard (AES) algorithm. The composite field arithmetic for implementing SubBytes (S-box) and InvSubBytes (Inverse S-box) transformations investigated by several authors is used as the basis for deriving the proposed architectures. The first architecture for encryption is based on optimized S-box followed by bit-wise implementation of MixColumns and AddRoundKey and optimized Inverse S-box followed by bit-wise implementation of InvMixColumns and AddMixRoundKey for decryption. The proposed S-box and Inverse S-box used in this architecture are designed as a cascade of three blocks. In the second proposed architecture, the block III of the proposed S-box is combined with the MixColumns and AddRoundKey transformations forming an integrated unit for encryption. An integrated unit for decryption combining the block III of the proposed InvSubBytes with InvMixColumns and AddMixRoundKey is formed on similar lines. The delays of the proposed architectures for VLSI implementation are found to be the shortest compared to the state-of-the-art implementations of AES operating in non-feedback mode. Iterative and fully unrolled sub-pipelined designs including key schedule are implemented using FPGA and ASIC. The proposed designs are efficient in terms of Kgates/Giga-bits per second ratio compared with few recent state-of-the-art ASIC (0.18-μm CMOS standard cell) based designs and throughput per area (TPA) for FPGA implementations.     

Efficient logic architectures for CMOL nanoelectronic circuits

CMOS molecular (CMOL) circuits promise great opportunities for future hybrid nanoscale IC implementation. Two new CMOL building blocks using transmission gates have been introduced to obtain efficient combinational and sequential logic for CMOL designs. Compared with the existing CMOL circuits, the proposed CMOL designs based on these blocks can achieve more than 30% improvement in speed and up to 80% improvement in density and power consumption while providing similar fault tolerance capabilities. This work significantly advances the applications of CMOL to actual electronic circuits and systems     

Designing efficient FPGA tiles for power-constrained ultra-low-power applications

High power consumption of Field-Programmable Gate Arrays (FPGAs) makes them a less attractive choice for ultra-low-power applications. Depending on the power source, ultra-low-power systems could either be constrained by power (energy harvesting systems) or by energy (battery-powered systems). In this work, we are evaluating four different FPGA tiles to find the one that is better suited for both power-constrained and energy-constrained systems. Ultra-low-power systems apply voltage downscaling to reduce the power consumption. However, the operational limits of different blocks do not allow conventional FPGA to be operated at very low voltage. Therefore, their logic capacity can only be increased by 2–4 times by applying voltage downscaling. In this work, we identified the blocks in FPGA tiles that are vulnerable at low voltage and replace them with alternate circuits. The results indicate that, by slight modifications in the conventional FPGA tiles, logic capacity can be increased up to 8 times, whereas power-delay-product can be reduced up to 74%.     

A leakage reduction methodology for distributed MTCMOS

Multithreshold CMOS (MTCMOS) circuits reduce standby leakage power with low delay overhead. Most MTCMOS designs cut off the power to large blocks of logic using large sleep transistors. Locally distributing sleep devices has remained less popular even though it has several advantages described in this paper. However, locally placed sleep devices are only feasible if sneak leakage currents are prevented. This paper makes two contributions to leakage reduction. First, we examine the causes of sneak leakage paths and propose a design methodology that enables local insertion of sleep devices for sequential and combinational circuits. A set of design rules allows designers to prevent most sneak leakage paths. A fabricated 0.13-/spl mu/m, dual V/sub T/ test chip employs our methodology to implement a low-power FPGA architecture with gate-level sleep FETs and over 8/spl times/ measured standby current reduction. Second, we describe the implementation and benefits of local sleep regions in our design and examine the interfacing issues for this technique. Local sleep regions reduce leakage in unused circuit components at a local level while the surrounding circuits remain active. Measured results show that local sleep regions reduce leakage in active configurable logic blocks (CLBs) on our chip by up to 2.2/spl times/ (measured) based on configuration.     

High performance low power CMOS dynamic logic for arithmetic circuits

This paper presents the design of high performance and low power arithmetic circuits using a new CMOS dynamic logic family, and analyzes its sensitivity against technology parameters for practical applications. The proposed dynamic logic family allows for a partial evaluation in a computational block before its input signals are valid, and quickly performs a final evaluation as soon as the inputs arrive. The proposed dynamic logic family is well suited to arithmetic circuits where the critical path is made of a large cascade of inverting gates. Furthermore, circuits based on the proposed concept perform better in high fanout and high switching frequencies due to both lower delay and dynamic power consumption. Experimental results, for practical circuits, demonstrate that low power feature of the propose dynamic logic provides for smaller propagation time delay (3.5 times), lower energy consumption (55%), and similar combined delay, power consumption and active area product (only 8% higher), while exhibiting lower sensitivity to power supply, temperature, capacitive load and process variations than the dynamic domino CMOS technologies.     

A New Hybrid Fault-Tolerant Architecture for Digital CMOS Circuits and Systems

This paper presents a new hybrid fault-tolerant architecture for robustness improvement of digital CMOS circuits and systems. It targets all kinds of errors in combinational part of logic circuits and thus, can be combined with advanced SEU protection techniques for sequential elements while reducing the power consumption. The proposed architecture combines different types of redundancies: information redundancy for error detection, temporal redundancy for soft error correction and hardware redundancy for hard error correction. Moreover, it uses a pseudo-dynamic comparator for SET and timing errors detection. Besides, the proposed method also aims to reduce power consumption of fault-tolerant architectures while keeping a comparable area overhead compared to existing solutions. Results on the largest ISCAS’85 and ITC’99 benchmark circuits show that our approach has an area cost of about 3 % to 6 % with a power consumption saving of about 33 % compared to TMR architectures.