直播流媒体传输系统的冗余优化

摘 要: 对HTTP Live Streaming深入研究之后,发现该协议在直播流媒体传输过程中存在视频流索引文件重复传送的问题。详细阐述了服务器与客户端之间的交互过程,并通过对网络监控软件的使用,检测到交互过程中服务器传输给客户端的视频流索引文件存在较大的冗余,造成网络带宽开销增大。提出一种可行的改进方案,在.M3U8文件中添加一个#EXT-X-MEDIA-SEQUENCE-LAST标签,并使服务器和客户端都对该标签进行识别。通过对网络占用率的对比分析,改进后的方案对网络带宽的占用率明显减小,进而验证了该改进方案的可行性。     

HLS直播流媒体传输系统的冗余优化

对HTTP Live Streaming深入研究之后,发现该协议在直播流媒体传输过程中存在视频流索引文件重复传送的问题。详细阐述了服务器与客户端之间的交互过程,并通过对网络监控软件的使用,检测到交互过程中服务器传输给客户端的视频流索引文件存在较大的冗余,造成网络带宽开销增大。提出一种可行的改进方案,在.m3u8文件中添加一个#EXT-X-MEDIA-SEQUENCE-LAST标签,并使服务器和客户端都对该标签进行识别。通过对网络占用率的对比分析,改进后的方案对网络带宽的占用率明显减小,进而验证了该改进方案的可行性。     

基于OpenCV与Socket的网络视频监控系统设计与实现

为了降低开发视频监控系统的成本与时间,提出一种新的、可行的网络视频监控系统方案。该系统使用OpenCV与Socket编程实现,采用的是客户机/服务器(C/S)模型。客户端请求进行视频监控并对视频流图像接收、显示;服务器端采用多进程编程满足多客户的监控请求并将采集到的视频图像以视频流的方式发送到客户端。实验结果表明该系统设计极大降低了视频监控系统的开发时间与开销。     

一种基于SoPC技术的HDTV台标机设计

介绍了一种可通过网络进行控制的HDTV台标机设计方案,该方案在FPGA平台上实现,主控制器为NiosⅡCPU,视频输入和输出接口为HDMI,最高支持1 080p分辨力的非压缩视频流,用户可通过网络协议传输需要叠加的图像.     

端到端实时视频流发送与接收方案实现

视频流具有边下载边播放的特点,其发送与接收也有多种方法和技术。基于实时传输协议RTP/RTCP协议和网络编程接口WinSock技术,提出了一种实时视频流发送与接收方案,该方案利用IP网络的分层结构和RTP/RTCP协议的反馈机制实现传输包的封装、控制视频流的发送与接收速率。本文对方案进行了描述,并阐述了该方案的实现方法。     

一种基于Android手机的移动视频直播系统的设计与实现

无线网络及移动计算技术的发展为面向新型网络环境的在线视频直播提供了机遇,但网络的动态性及流服务的实时性也对系统实现带来挑战.针对上述问题,本文设计并实现了一个基于Android手机的移动视频直播系统,该系统支.持用户通过智能手机内嵌摄像头实时采集现场视频信息,并通过Wi-Fi或3G等上传视频流至服务器,提供在线直播或点播服务.文中详细描述了视频采集、视频发布处理和视频播放等核心功能的设计与实现机制,并从视频编码和网络传输两个方面对系统性能进行了分析.     

基于IP网络音、视频流式传输的实现

提出了基于IP网络的音、视频流式传输的实现方案,对其相关技术作了分析;阐述了该方案的实现过程,并对音、视频流式传输的网络应用作了介绍.     

一个基于速率控制的Internet视频流服务方案

由于视频流服务对于网络服务质量有着较高的要求,而现有的Internet所提供的是尽力而为的服务,无法保证数据的实时传输。该文设计了一个用于Internet上视频流的端到端传输方案.整个方案设计的目的是在网络本身缺乏服务质量保证的条件下尽可能达到最好的视频传输质量。根据可用带宽估计和网络信息反馈,系统对发送速率进行调整,并提供两种视频流服务:存储视频和实时视频。仿真结果表明方案的性能良好,能满足Internet视频流的需求。     

面向裸眼3D显示的实时多视角视频采集系统设计

针对裸眼3D显示屏研究了一种实时多视角视频采集系统。该系统使用高清网络摄像头阵列进行多视点原始画面拍摄,通过网络传输视频流,视频数据经过解码、矫正、合成等处理后变为具有多个视点(水平方向)的实时视频图像。实验结果表明,该系统较好地解决了实际拍摄中存在的畸变、图像对齐等问题,实现了实时4个视点(水平方向)的全高清视频输出,能直接在特定的裸眼3D显示器上观看。     

基于多流三音素DBN模型的音视频语音识别和音素切分

为实现音视频语音识别和同时对音频视频流进行准确的音素切分,该文提出一个新的多流异步三音素动态贝叶斯网络(MM-ADBN-TRI)模型,在词级别上描述了音频视频流的异步性,音频流和视频流都采用了词-三音素-状态-观测向量的层次结构,识别基元是三音素,描述了连续语音中的协同发音现象.实验结果表明:该模型在音视频语音识别和对音频视频流的音素切分方面,以及在确定音视频流的异步关系上,都具备较好的性能.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.