Investigation of BiFeO3 modified PbTiO3-Bi(MgZr)O3-based complex perovskite ceramics

Bismuth containing crystalline solutions of (1 − x)Bi(MgZr)_0.5O₃-xPbTiO₃ (BMZ-PT) and [(BiFeO₃)_y − (BiMg_0.5Zr_0.5)_1−y]_x − [PbTiO₃]_1−x (BMZ-BF-PT) have been developed using conventional ceramic technology. X-ray diffraction analysis reveals that both the systems possess a perovskite structure, in which tetragonal to rhombohedral phase transformation appears for x = 0.55 in BMZ-PT and y = 0.20 in BMZ-BF-PT systems. SEM photographs reveal a uniform grain size distribution in the solid solution matrix with the presence of ferroelectric domains in few of the compositions. Ferroelectric hysteresis (polarization-electric field, P-E) loops reveal that increase in BiFeO₃ in BMZ-PT systems results in a decrease in residual polarization of the system with change and distortion in the shape of the (P-E) loops.     

Microstructure and electrical properties of Ba0.7Sr0.3(Ti1 − xZrx)O3 thin films prepared on copper foils with sol-gel method

Ba_0.7Sr_0.3(Ti_1 − xZr_x)O₃ (x = 0, 0.1, 0.2) (BSZT) thin films have been prepared on copper foils using sol-gel method. The films were annealed in an atmosphere with low oxygen pressure so that the substrate oxidation was avoided and the formation of the perovskite phase was allowed. The X-ray diffraction results show a stable polycrystalline perovskite phase, with the diffraction peaks of the BSZT films shifting toward the smaller 2θ with increasing Zr content. Scanning electron microscopy images show that the grain size of the BSZT thin films decreases with increasing Zr content. High resolution transmission electron microscopy shows the clear lattice and domain structure in the film. The dielectric peaks of the BSZT thin films broaden with increasing Zr content. Leakage current density of Ba_0.7Sr_0.3(Ti_1 − xZr_x)O₃ (x = 0.1) thin film is the lowest over the whole applied voltage.     

Effect of the Mn ion on electrical and magnetic properties of orthorhombic perovskite-type Ca(Mn1−xTix)O3−δ

Orthorhombic perovskite-type Ca(Mn_1−xTi_x)O_3−δ (0 ≤ x ≤ 0.7) was synthesized at 1173 K for 12 h in a flow of oxygen from a precursor gel prepared using citric acid and ethylene glycol. The Mn³⁺ ion was generated by substituting a Ti⁴⁺ ion in CaMnO₃. The average particle size was 100-300 nm and did not depend on x. The lattice constants and the (Mn, Ti)-O distance increased linearly with increasing x. The variation in global instability index (GII) indicated that the instability of the structure increases monotonically with increasing x. Ca(Mn_1−xTi_x)O_3−δ was an n-type semiconductor that had its minimum values of electrical resistivity (ρ) and activation energy (E_a) at x = 0.1. Ca(Mn_1−xTi_x)O_3−δ (x = 0 and 0.1) exhibited a weak ferromagnetic behavior. The variation in μ_eff indicated that the spin state of the Mn³⁺ ion changes from low to high at x = 0.1, then reverts to low in the range of 0.2 ≤ x ≤ 0.7. The variations in ρ and E_a are explained by the number of electrons according to the change in the spin state of the Mn³⁺ ion.     

Structural, magnetic and dielectric properties of Bi1−ySryFe(1−y)(1−x)Sc(1−y)xTiyO3 (x = 0-0.2, y = 0.1-0.3) ceramics

In this study, bulk ceramics with general formula Bi_1−ySr_yFe_{(1−y)(1−x)}Sc_(1−y)xTi_yO₃ (x = 0-0.2, y = 0.1-0.3 mol%) were prepared by traditional solid-state reaction method. As a comparison, bulk BiFeO₃ (BF) was also sintered by rapid sintering method. Their structural, magnetic, dielectric properties were investigated. X-ray diffraction analysis indicated that apart from a small amount of secondary phase detected in BF, all other samples crystallized in pure perovskite structure and maintained original R3c space group. The room temperature M-H curves were obtained. While BF had a coercive magnetic field (H_c) of 150 Oe, Bi_1−ySr_yFe_1−yTi_yO₃ solid solutions had a much larger value (for y = 0.1, 0.2, 0.3, H_c were 4537, 5230 and 3578 Oe, respectively). Sc³⁺ substitution decreased the H_c values of these solid solutions remarkably, and resulted in soft magnetic properties, as well as a decrease of the dielectric loss. At 1 MHz, the tan δ of Bi_0.7Sr_0.3Fe_0.7(1−x)Sc_0.7xTi_0.3O₃ with x = 0.05, 0.1, 0.15, 0.2 were 0.1545, 0.1078, 0.1046 and 0.1701, respectively.     

Novel Dy-doped Ca2Gd8(SiO4)6O2 white light phosphors for Hg-free lamps application

The luminescent properties of Ca₂Gd_8(1−x)(SiO₄)₆O₂:xDy³⁺ (1% ≤ x ≤ 5%) powder crystals with oxyapatite structure were investigated under vacuum ultraviolet excitation. In the excitation spectrum, the peaks at 166 nm and 191 nm of the vacuum ultraviolet region can be assigned to the O²⁻ → Gd³⁺, and O²⁻ → Dy³⁺ charge transfer band respectively, which is consistent with the theoretical calculated value using Jφrgensen's empirical formula. While the peaks at 183 nm and 289 nm are attributed to the f-d spin-allowed transitions and the f-d spin-forbidden transitions of Dy³⁺ in the host lattice with Dorenbos's expression. According to the emission spectra, all the samples exhibited excellent white emission under 172 nm excitation and the best calculated chromaticity coordinate was 0.335, 0.338, which indicates that the Ca₂Gd₈(SiO₄)₆O₂:Dy³⁺ phosphor could be considered as a potential candidate for Hg-free lamps application.     

Microstructure and microwave dielectric characteristics of (1 − x)Ba(Zn1/3Ta2/3)O3-xBaTi4O9 ceramics

(1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ (0.1 ≤ x ≤ 0.85) composites are prepared by mixing 1150 °C-calcined BaTi₄O₉ with 1150 °C-calcined Ba(Zn_1/3Ta_2/3)O₃ powders. The crystal structure, microwave dielectric properties and sinterabilites of the (1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ ceramics have been investigated. X-ray diffraction patterns reveal that BaTi₄O₉, ordered and disordered Ba(Zn_1/3Ta_2/3)O₃ phases exist independently over the whole compositional range. The sintering temperatures of (1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ ceramics are about 1240 - 1320 °C and obviously lower than those of Ba(Zn_1/3Ta_2/3)O₃ ceramics. The dielectric constants (?_r) and the temperature coefficient of resonant frequency (τ_f) of (1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ ceramics increase with the increase of BaTi₄O₉ content. Nevertheless, the bulk densities and the quality values (Q × f) of (1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ ceramics increase with the increase of Ba(Zn_1/3Ta_2/3)O₃ content. The results are attributed to the higher density and quality value of Ba(Zn_1/3Ta_2/3)O₃ ceramics, the better grain growth, and the densification of sintered specimens added a small BaTi₄O₉ content. The (1 − x)Ba(Zn_1/3Ta_2/3)O₃-xBaTi₄O₉ ceramic with x = 0.1 sintered at 1320 °C exhibits a ?_r value of 31.5, a maximum Q × f value of 68500 GHz and a minimum τ_f value of 4.1 ppm/°C.     

Dielectric and pyroelectric anisotropy in melt-quenched BaBi2(Nb1 − xVx)2O9 ceramics

The (0 0 l) textured BaBi₂(Nb_1 − xV_x)₂O₉ (where x = 0, 0.03, 0.07, 0.1 and 0.13) ceramics were fabricated via the conventional melt-quenching technique followed by high temperature heat-treatment (800-1000 °C range). The influence of vanadium content and sintering temperature on the texture development and relative density were investigated. The samples corresponding to the composition x = 0.1 sintered at 1000 °C for 10 h exhibited the maximum orientation of about 67%. The Scanning electron microscopic studies revealed the presence of platy grains having the a-b planes perpendicular the pressing axis. The dielectric constant and the pyroelectric co-efficient values in the direction perpendicular to the pressing axis were higher. The anisotropy in the dielectric constant is about 100 (at 100 kHz) at the dielectric maximum temperature and anisotropy in the pyroelectric co-efficient is about 50 μC cm⁻² °C⁻¹ in the vicinity of pyroelectric anomaly for the sample corresponding to the composition x = 0.1 sintered at 1000 °C. Higher values of the dielectric loss and electrical conductivity were observed in the direction perpendicular to the pressing axis which is attributed to the high oxygen ion conduction in the a-b planes.     

Larger Ba(NO3)2/Sr(NO3)2 crystal growth and solubility determination

The solubility of Ba(NO₃)₂ and Sr(NO₃)₂ crystals in aqueous solution from 25 to 65 °C has been determined by both an optical interferometer and a weight technique. A Mach-Zehnder interferometer was used for measuring the concentration distribution of Ba(NO₃)₂ and Sr(NO₃)₂ near the solid/liquid interface during crystal growth and dissolution. A fringe carrier technique was introduced to visualize more clearly the boundary layer and to solve the concentration distribution. Crystals were successfully grown with sizes larger than  mm by a temperature cooling method. The Ba_xSr_1−x(NO₃)₂ crystal was also nucleated and grown. The Raman spectra of Ba_xSr_1−x(NO₃)₂ indicate that the barium ions probably degrade the properties of Sr(NO₃)₂.     

Synthesis and characterization of Sr(10−x)Cdx(PO4)6Y2 (Y = OH and F): A comparison of apatites containing two divalent cations

Cadmium substituted strontium hydroxy- and fluoro-apatites, Sr_(10−x)Cd_x(PO₄)₆Y₂ (Y = OH and F), have been prepared as single phases in the 0 ≤ x ≤ 4 interval for the former and 0 ≤ x ≤ 6 for the latter compound, respectively. The refinements of the X-ray full powder patterns allowed the structure determination of nine samples, and showed a preference of cadmium atoms for the M(1) site in fluoroapatite samples. IR investigation gave information about the nature of the metal oxygen interactions. The obtained results are used for a comparative discussion about the factors which drive the mutual substitution of Ca, Sr, Cd and Pb in apatites. The important role of electronegativity and polarisability, as well as of ionic radii, is evidenced.     

Thermal, spectroscopic and magnetic properties of the CoxNi1−x(SeO3)·2H2O (x = 0, 0.4, 1) phases: Crystal structure of Co0.4Ni0.6(SeO3)·2H2O

The Co_xNi_1−x(SeO₃)·2H₂O (x = 0, 0.4, 1) family of compounds has been hydrothermally synthesized under autogeneous pressure and characterized by elemental analysis, infrared and UV-vis spectroscopies and thermogravimetric and thermodiffractometric techniques. The crystal structure of Co_0.4Ni_0.6(SeO₃)·2H₂O has been solved from single-crystal X-ray diffraction data. This phase is isostructural with the M(SeO₃)·2H₂O (M = Co and Ni) minerals and crystallizes in the P2₁/n space group, with a = 6.4681(7), b = 8.7816(7), c = 7.5668(7) Å, β = 98.927(9)° and Z = 4. The crystal structure of this series of compounds consists of a three-dimensional framework formed by (SeO₃)²⁻ selenite oxoanions and edge-sharing M₂O₁₀ dimeric octahedra in which the metallic cations are coordinated by the oxygens belonging to both the selenite groups and water molecules. The diffuse reflectance spectra show the essential characteristics of Co(II) and Ni(II) cations in slightly distorted octahedral environments. The calculated values of the Dq and Racah (B and C) parameters are those habitually found for the 3d⁷ and 3d⁸ cations in octahedral coordination. The magnetic measurements indicate the existence of antiferromagnetic interactions in all the compounds. The magnetic exchange pathways involve the metal orbitals from edge-sharing dimeric octahedra and the (SeO₃)²⁻ anions which are linked to the M₂O₁₀ polyhedra in three dimensions.     

Synthesis and luminescence properties of color-tunable Ba1−ySryLa4−xTbx(WO4)7 (x = 0.02-1.2, y = 0-0.4) phosphors

Ba_1−ySr_yLa_4−xTb_x(WO₄)₇ (x = 0.02-1.2, y = 0-0.4) phosphors were prepared via a solid-state reaction and their photoluminescence properties were investigated. An analysis of the decay behavior indicates that the energy migration between Tb³⁺ ions is conspicuous in the ⁵D₃ → ⁷F₄ transition due to the cross-relaxation in BaLa₄(WO₄)₇. A partial substitution of Ba²⁺ by Sr²⁺ can not only enhance the emission intensity but also increase the solid solubility of Tb³⁺ in Ba_1−ySr_yLa_4−xTb_x(WO₄)₇. The emission intensity of the ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions can be enhanced by increasing Sr²⁺ and Tb³⁺ concentrations, with the optimal conditions being x = 1.2, y = 0.4 (Ba_0.6Sr_0.4La_2.8Tb_1.2(WO₄)₇). Under near-UV excitation at 379 nm, the CIE color coordinates of Ba_1−ySr_yLa_4−xTb_x(WO₄)₇ vary from blue (0.212, 0.181) at x = 0.04, y = 0, to green (0.245, 0.607) at x = 1.2, y = 0.4.     

Yb-doped NaBi(WO4)2 fibre single crystals grown by the micro-pulling down technique and emission spectroscopic characterization

NaBi_1−xYb_x(WO₄)₂ fibres single crystals were successfully grown by micro-pulling down technology (MPD). The Yb³⁺-doped NaBi(WO₄)₂ fibres single crystals have been pulled using MPD technique with controlled diameter and stationary stable growth conditions corresponding to flat crystallization interface with meniscus length equal to the fibre radii and pulling rate range [6-48 mm h⁻¹]. We have determined the monophased field of NaBi_1−xYb_x(WO₄)₂ for x ≤ 0.3. The lattices parameters decrease as a function of Yb³⁺ substitution in Bi³⁺ sites. The melt behaviour has been study by DTA/TG analysis. We have found that the stoichiometric compounds NaBi(WO₄)₂ melt congruently at 935 °C. The fibre diameters varied from 0.5 to 1 mm depending on the capillary die diameter, pulling rate and the molten zone temperature. Complementary Yb³⁺ spectroscopic characterization in the NaBi(WO₄)₂ lattice has been done by IR emission measurements under laser pumping at room temperature.     

Electrical properties of Pb0.97La0.02(Zr0.95Ti0.05)O3 antiferroelectric thin films on TiO2 buffer layer

Pb_0.97La_0.02(Zr_0.95Ti_0.05)O₃ antiferroelectric thin films with thickness of 500 nm were successfully deposited on TiO₂ buffered Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) and Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates via sol-gel process. Microstructure of Pb_0.97La_0.02(Zr_0.95Ti_0.05)O₃ thin films was studied by X-ray diffraction analyses. The antiferroelectric nature of the Pb_0.97La_0.02(Zr_0.95Ti_0.05)O₃ thin films was confirmed by the double hysteresis behaviors of polarization and double buffer fly response of dielectric constant versus applied voltage at room temperature. The capacitance-voltage behaviors of the Pb_0.97La_0.02(Zr_0.95Ti_0.05)O₃ films with and without TiO₂ buffer layer were studied, as a function of temperature. The temperature dependence of dielectric constant displayed a similar behavior and the Curie temperature (T_c) was 193 °C for films on both substrates. The current caused by the polarization and depolarization of polar in the Pb_0.97La_0.02(Zr_0.95Ti_0.05)O₃ films was detected by current density-electric field measurement.     

Synthesis and optical properties of (Gd1−x,Eux)2O2SO4 nano-phosphors by a novel co-precipitation method

(Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphors were synthesized by a novel co-precipitation method from commercially available Gd₂O₃, Eu₂O₃, H₂SO₄ and NaOH starting materials. Composition of the precursor is greatly influenced by the molar ratio of NaOH to (Gd_1−x,Eu_x)₂(SO₄)₃ (the m value), and the optimal m value was found to be 4. Fourier transform infrared spectrum (FT-IR) and thermal analysis show that the precursor (m = 4) can be transformed into pure (Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphor by calcining at 900 °C for 2 h in air. Transmission electron microscope (TEM) observation shows that the Gd₂O₂SO₄ phosphor particles (m = 4) are quasi-spherical in shape and well dispersed, with a mean particle size of about 30-50 nm. Photoluminescence (PL) spectroscopy reveals that the strongest emission peak is located at 617 nm under 271 nm light excitation, which corresponds to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. The quenching concentration of Eu³⁺ ions is 10 mol% and the concentration quenching mechanism is exchange interaction among the Eu³⁺ ions. Decay study reveals that the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions has a single exponential decay behavior.     

Synthesis, low-temperature sintering and the dielectric properties of the ZnO-(1 − x)TiO2-xSnO2 (x = 0.04-0.2)

ZnO-(1 − x)TiO₂-xSnO₂ (x = 0.04-0.2) ceramics were prepared by conventional mixed-oxide method combined with a chemical processing. Fine particle powders were prepared by chemical processing to activate the formation of compound and to improve the sinterability. One wt.% of V₂O₅ and B₂O₃ with the mole ratios of 3:1 were used to lower the sintering temperature of ceramics. The effect of Sn content on phase structure and dielectric properties were investigated. The results show that the substituting Sn for Ti accelerates the hexagonal phase transition to cubic phase, and an inverse spinel structure Zn₂(Ti_1−xSn_x)O₄ solid solution forms. The best dielectric properties obtained at x = 0.12. The ZnO-0.88TiO₂-0.12SnO₂ ceramics sintered at 900 °C exhibit a good dielectric property: ?_r = 29 and tan δ = 9.86 × 10⁻⁵. Due to their good dielectric properties, low firing characteristics, ZnO-(1 − x)TiO₂-xSnO₂ (x = 0.04-0.2) can serve as the promising microwave dielectric capacitor.     

Synthesis and photoluminescent properties of mesoporous (MgO)x(ZnO)1−x materials

(MgO)_x(ZnO)_1−x materials have been synthesized using mesoporous carbon as template. By increasing the MgO content in the materials greater than 25%, the (MgO)_x(ZnO)_1−x materials began to form the mesoporous structure. Pore size distribution curves indicated that the BJH pore diameter decreased with increasing MgO content. In photoluminescence spectra, all the samples except pure ZnO showed both the band-edge emission and the deep-level emission (green band). It was interesting to note that the UV emission peak energy (E_UV) had a red-shift of about 48 meV at the low MgO content range of 0-25%, while when the MgO content varied from 25 to 75%, the E_UV displayed a blue-shift of about 36 meV to the higher energy direction. The optical band gap (E_g) of the (MgO)_x(ZnO)_1−x calculated from the absorption spectra was far smaller than that in literature, and this may be related to the formation of mesoporous structure.     

Effect of Pb(Fe1/2Nb1/2)O3 modification on dielectric and piezoelectric properties of Pb(Mg1/3Nb2/3)O3-PbZr0.52Ti0.48O3 ceramics

10 mol% Pb(Fe_1/2Nb_1/2)O₃ (PFN) modified Pb(Mg_1/3Nb_2/3)O₃-PbZr_0.52Ti_0.48O₃ (PMN-PZT) relaxor ferroelectric ceramics with compositions of (0.9 − x)PMN-0.1PFN-xPZT (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 and 0.9) were prepared. X-ray diffraction investigations indicated that as-prepared ceramics were of pure perovskite phase and the sample with composition of x = 0.8 was close to morphotropic phase boundary (MPB) between rhombohedral and tetragonal phase. Dielectric properties of the as-prepared ceramics were measured, and the Curie temperature (T_c) increased sharply with increasing PZT content and could be higher than 300 °C around morphotropic phase boundary (MPB) area. At 1 kHz, the sample with composition of x = 0.1 had the largest room temperature dielectric constant ?_r = 3519 and maximum dielectric constant ?_m = 20,475 at T_m, while the sample with composition of x = 0.3 possessed the maximum dielectric relaxor factor of γ = 1.94. The largest d₃₃ = 318 pC/N could be obtained from as-prepared ceramics at x = 0.9. The maximum remnant polarization (P_r = 28.3 μC/cm²) was obtained from as-prepared ceramics at x = 0.4.     

Formation, sintering, and electrical conductivity of (Nd1−xCax)CrO3 (0≤x≤0.25) using citric acid as a gelling agent

In Ca²⁺-substituted NdCrO₃, single-phase perovskite compounds (Nd_1−xCa_x)CrO₃, where x=0-0.25, have been formed by a citric acid processing. (Nd_1−xCa_x)CrO₃ powders consisting of submicrometer-size particles are sinterable; dense materials can be fabricated by sintering for 2 h at 1700°C under atmospheric pressure. The relative densities, grain sizes, and electrical conductivities increase with increased Ca²⁺ content. (Nd_0.75Ca_0.25)CrO₃ materials show an excellent electrical conductivity of 1.9×10 S m⁻¹ at 1000°C.     

Pechini sol-gel deposition and luminescent properties of SrLa1−xRExGa3O7 (RE = Eu, Tb) phosphor films

SrLa_1−xRE_xGa₃O₇ (RE = Eu³⁺, Tb³⁺) phosphor films were deposited on quartz glass substrates by a simple Pechini sol-gel method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy, field-emission scanning electron microscopy, photoluminescence spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 700 °C and crystallized fully at 900 °C. The results of FT-IR spectra were in agreement with those of XRD. Uniform and crack-free films annealed at 900 °C were obtained with average grain size of 80 nm, root mean square roughness of 46 nm and thickness of 130 nm. The RE ions showed their characteristic emission in crystalline SrLa_1−xRE_xGa₃O₇ films, i.e., Eu³⁺⁵D₀-⁷F_J (J = 0, 1, 2, 3, 4), Tb³⁺⁵D₄-⁷F_J (J = 6, 5, 4, 3) emissions, respectively. The optimum concentrations (x) of Eu³⁺ and Tb³⁺ were determined to be 50, and 80 mol% in SrLa_1−xRE_xGa₃O₇ films, respectively.     

Synthesis of perovskite-type (La1−xCax)FeO3 (0 ≤ x ≤ 0.2) at low temperature

Gel formation was realized by adding citric acid to a solution of La(NO₃)₃·5H₂O, Ca(NO₃)₂·4H₂O, and Fe(NO₃)₂·9H₂O. Perovskite-type (La_1−xCa_x)FeO₃ (0 ≤ x ≤ 0.2) was synthesized by firing the gel at 500 °C in air for 1 h. The crystallite size (D_1 2 1) decreased with increasing x, while the specific surface area was 6.8-9.4 m²/g and independent of x. The XPS measurement of the (La_1−xCa_x)FeO₃ surface indicated that the Ca²⁺ ion content increased with increasing x, while the Fe ion content was independent of x. Catalytic activity for CO oxidation increased with increasing x.