A potential Eu-activated Ca10K(PO4)7 red phosphor for white light-emitting diodes

New red Ca₁₀K(PO₄)₇:Eu³⁺, K⁺ phosphors were synthesized by solid state reaction and their photoluminescence properties as well as those by co-doping Mo⁶⁺ under near ultraviolet excitation were investigated. From the excitation spectra monitored at 611 nm, it can be seen that the strongest excitation peak is situated at 393 nm, well matching with the emission wavelength of near-ultraviolet chips for white LEDs. Upon 393 nm excitation, the brightness of Ca₉K(PO₄)₇:0.5Eu³⁺, 0.5 K⁺ with the optimal Eu³⁺-doping concentration is about 2.3 times stronger than that of the commercial red Y₂O₃:Eu³⁺ phosphor. The introducing of Mo⁶⁺, which results in a possible variety for the excited energy level of the host, can enhance the brightness of Eu³⁺ to be maximized by about 15%. The CIE chromaticity coordinates of Ca₉K(PO₄)₇:0.5Eu³⁺, 0.5 K⁺ are calculated to (0.654, 0.345), which are close to the (0.67, 0.33) standard of the National Television System Committee. All the above results indicate Eu³⁺-activated Ca₁₀K(PO₄)₇ is a potential candidate for white LEDs.     

Luminescent properties of Sr2P2O7:Eu,Mn phosphor under near UV excitation

The phosphors in the system Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have strong absorption in the near UV region, which is suitable for excitation of ultraviolet light emitting diodes (UVLEDs). The orange-reddish emission of Mn²⁺ in these phosphors can be used as a red component in the tri-color system and may be enhanced by adjusting the Mn²⁺/Eu²⁺ ratio. The energy transfer from Eu²⁺ to Mn²⁺ is observed with a transfer efficiency of ∼0.45 and a critical distance of ∼10 Å. The results reveal that Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ phosphors could be used in white light UVLEDs.     

Luminescent properties of Na3YSi3O9 doped with Eu under UV-VUV excitation

The luminescent properties of Na₃Y_1−xSi₃O₉:xEu³⁺ (0.05 ≦ x ≦ 0.80) powder crystals were investigated in UV-VUV region. The Eu³⁺-O²⁻ charge transfer band (CTB) was observed to be located at around 233 nm and the environmental parameter (h_e) was estimated to be about 0.730. The excitation spectrum monitoring the 613 nm red emission from Eu³⁺ ions reveals the host absorption band (HAB) to be around 145 nm. The calculated Commission Internationale de l’Eclairage (CIE) chromaticity coordinates indicate the emission by 233 nm rather than by 147 nm excitation has the better color purity and the possible mechanisms have been proposed. The Eu³⁺-emission showed high quenching concentration due to the isolated YO₆ octahedra in the host and the small h_e for the Eu³⁺ ions and the optimum concentration was determined to be as high as x = 0.65 and 0.30 with 233 and 147 nm excitation, respectively.     

Luminescence of SrGdGa3O7:RE(RE = Eu, Tb) phosphors and energy transfer from Gd to RE

Eu³⁺- and Tb³⁺-activated SrGdGa₃O₇ phosphors were synthesized by the solid-state reaction and their luminescence properties were investigated. Sr(Gd_1 − xEu_x)Ga₃O₇ and Sr(Gd_1 − xTb_x)Ga₃O₇ formed continuous solid solution in the range of x = 0-1.0. Unactivated SrGdGa₃O₇ exhibited a typical characteristic excitation and emission of Gd ion. The SrGdGa₃O₇:xEu³⁺ and SrGdGa₃O₇:xTb³⁺ phosphors also showed the well-known Eu³⁺ and Tb³⁺ excitation and emission. The energy transfer from Gd³⁺ to Eu³⁺ and Tb³⁺ were verified by photoluminescence spectra. The dependence of photoluminescence intensity on Eu³⁺ and Tb³⁺ concentration were also studied in detail and the photoluminescence (PL) intensity of SrGdGa₃O₇:Eu and SrGdGa₃O₇:Tb were compared with commercial phosphors, Y₂O₃:Eu and LaPO₄:Ce,Tb. The luminescence decay measurements showed that the lifetimes of Eu³⁺ and Tb³⁺ were in the range of microsecond. The energy transfer from Gd³⁺ to Tb³⁺ was also observed in decay curve.     

A promising red phosphor MgMoO4:Eu for white light emitting diodes

Motivated by the need for new red phosphors for solid-state lighting applications Eu³⁺-doped MgMoO₄ was prepared by solid-state reaction and its excitation and emission spectra were measured at room temperature. In addition, the effects of firing temperature and Eu³⁺ doping concentration on the PL intensities were also investigated. Compared with Y₂O₂S:0.05Eu³⁺, the obtained Mg_0.80MoO₄:Eu³⁺_0.20 phosphor shows a stronger excitation band near 400 nm and intensely red-emission lines at 616 nm correspond to the forced electric dipole ⁵D₀ → ⁷F₂ transitions on Eu³⁺ under 394 nm light excitation. The CIE chromaticity coordinates (x = 0.651, y = 0.348) of Mg_0.80MoO₄:Eu³⁺_0.20 close to the NTSC (National Television Standard Committee) standard values, and therefore may find application on near UV InGaN chip-based white light emitting diodes.     

Luminescent properties of long lasting phosphor Ca2MgSi2O7:Eu

Long afterglow phosphors (Ca_1−xEu_x)₂MgSi₂O₇ (0.002 ≤ x ≤ 0.02) were prepared by solid-state reactions under a weak reductive atmosphere. X-ray diffraction pattern, photoluminescence spectra, decay curve, afterglow spectra and thermoluminescence curves were investigated. The phosphors showed two emission peaks when they were excited by 343 nm, due to two types of Eu²⁺ centers existing in the Ca₂MgSi₂O₇ lattice. However, only one emission peak can be found in their afterglow spectra. Energy transfer between Eu²⁺ ions in inequivalent sites was found. A possible mechanism was presented and discussed. The afterglow decay time of Ca_1.998MgSi₂O₇:Eu_0.002 was nearly 12.5 h which means it was a good long lasting phosphor.     

Photoluminescence investigation of rare-earth activated GdCa3(GaO)3(BO3)4 phosphors under UV excitation

A borate compound was adopted as a new host material of Eu³⁺ and Tb³⁺ activators to fabricate efficient luminescence materials. The phosphor compositions, Gd_1−xEu_xCa₃(GaO)₃(BO₃)₄ and Gd_1−xTb_xCa₃(GaO)₃(BO₃)₄, were synthesized by conventional solid-state reactions. The crystalline phases of the resulting powders were identified using an X-ray diffraction system. Their photoluminescence properties were investigated under long-wavelength UV excitation. The Eu³⁺-doped and Tb³⁺-doped GdCa₃(GaO)₃(BO₃)₄ phosphors efficiently emitted red and green light, respectively. The temperature dependency of emission intensity was measured in a range from room temperature to 150 °C. The emission intensities of the red and green phosphors at 150 °C are 87% and 91% of those at room temperature, respectively. In addition, the decay times of both the red and green phosphors are shorter than 3 ms.     

Luminescence characterization of (Ca1−xSrx)(S1−ySey):Eu,M (M = Sc and Y) for high color rendering white LED

The highly efficient red phosphors (Ca_1−xSr_x)(S_1−ySe_y):Eu²⁺,M³⁺ (M = Sc and Y) were prepared, starting from CaCO₃, SrCO₃, Eu₂O₃, Sc₂O₃, Y₂O₃, S, and SeO₂ with a flux, by a conventional solid-state reaction. The optimized red phosphors converted 11.8% (Sc³⁺) and 11.7% (Y³⁺) of the absorbed blue light into luminescence. These quantum values are much higher than Q = 3.0% of CaS:Eu²⁺. For the fabrication of light-emitting diodes (LEDs), the prepared phosphors were coated with MgO from non-aqueous solution to overcome their weakness against moisture. White LEDs were fabricated by pasting the prepared red phosphors and the yellow YAG:Ce³⁺ phosphor on an InGaN blue chip (λ_ems = 446.5 nm). The incorporation of the red phosphor to the YAG:Ce³⁺ phosphor resulted in an improved color rendering index (Ra) from 70 to 80.     

Photoluminescence properties of NaGd(MoO4)2:Eu nanophosphors prepared by sol-gel method

NaGd(MoO₄)₂:Eu³⁺ (hereafter NGM:Eu) phosphors have been prepared by sol-gel method. The properties of the resulting phosphors are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curve. The excitation spectra of NGM:Eu phosphors are mainly attributed to O → Mo charge-transfer (CT) band at about 282 nm and some sharp lines of Eu³⁺ f-f transitions in near-UV and visible regions with two strong peaks at 395 and 465 nm, respectively. Under the 395 and 465 nm excitation, intense red emission peaked at 616 nm corresponding to ⁵D₀ → ⁷F₂ transition of Eu³⁺ are observed for 35 at.% NGM:Eu phosphors as the optimal doping concentration. The luminescence properties suggest that NGM:Eu phosphor may be regarded as a potential red phosphor candidate for near-UV and blue light-emitting diodes (LEDs).     

Synthesis and optical properties of (Gd1−x,Eux)2O2SO4 nano-phosphors by a novel co-precipitation method

(Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphors were synthesized by a novel co-precipitation method from commercially available Gd₂O₃, Eu₂O₃, H₂SO₄ and NaOH starting materials. Composition of the precursor is greatly influenced by the molar ratio of NaOH to (Gd_1−x,Eu_x)₂(SO₄)₃ (the m value), and the optimal m value was found to be 4. Fourier transform infrared spectrum (FT-IR) and thermal analysis show that the precursor (m = 4) can be transformed into pure (Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphor by calcining at 900 °C for 2 h in air. Transmission electron microscope (TEM) observation shows that the Gd₂O₂SO₄ phosphor particles (m = 4) are quasi-spherical in shape and well dispersed, with a mean particle size of about 30-50 nm. Photoluminescence (PL) spectroscopy reveals that the strongest emission peak is located at 617 nm under 271 nm light excitation, which corresponds to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. The quenching concentration of Eu³⁺ ions is 10 mol% and the concentration quenching mechanism is exchange interaction among the Eu³⁺ ions. Decay study reveals that the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions has a single exponential decay behavior.     

A red-emitting heavy doped phosphor Li6Y(BO3)3:Eu for white light-emitting diodes

A series of Eu³⁺ activated Li₆Y_1−xEu_x(BO₃)₃ (0.05 ? x ? 1) phosphors were synthesized by solid-state reaction method. The structures and photoluminescent properties of the phosphors were investigated at room temperature. The results of XRD patterns indicate that these phosphors are isotypic to the monoclinic Li₆Gd(BO₃)₃. The excitation spectra indicate that these phosphors can be effectively excited by near UV (370-410 nm) light. The red emission from transition ⁵D₀→⁷F₂ is dominant. The emission spectra exhibit strong red performance (CIE chromaticity coordinates: x = 0.65, y = 0.35), which is due to the ⁵D₀−⁷F_J transitions of Eu³⁺ ions. The relationship between the structure and the photoluminescent properties of the phosphors was studied. The concentration quenching occurs at x ≈ 0.85 under near UV excitation. Li₆Y(BO₃)₃:Eu³⁺ has potential application as a phosphor for white light-emitting diodes.     

Investigation of Na3GdP2O8:Tb as a potential green-emitting phosphor for plasma display panels

The photoluminescent properties of a series of Tb³⁺-doped Na₃GdP₂O₈ phosphors excitable by vacuum ultraviolet and ultraviolet light are reported. The host related absorption, f-f and f-d transitions of Gd³⁺ and Tb³⁺, and charge transfer of O²⁻ → Gd³⁺ and O²⁻ → Tb³⁺ are assigned. Under 147 nm light excitation, Na₃GdP₂O₈:Tb³⁺ phosphors show efficient green emissions with a dominant peak at 545 nm. The optimal sample Na₃Gd_0.4Tb_0.6P₂O₈ shows a shorter decay time and a comparable brightness when compared with the commercial Zn₂SiO₄:Mn²⁺ green phosphor. These results demonstrate that it is a potential candidate for plasma display panels application.     

Preparation, characterization and luminescence of La2TeO6 phosphor doped with Eu

Phosphors of La₂TeO₆ doped with Eu³⁺ ions have been synthesized by the oxidation of the corresponding rare-earths oxytellurides of formula La_2−xEu_xO₂Te (x = 0.02, 0.06, and 0.1) at 1050 K. Powder X-ray diffraction confirms that the as prepared materials consist of the orthorhombic La₂TeO₆ as main phase. The photoluminescence (PL) of red-emitting La_2−xEu_xTeO₆ powder phosphors is reported. The emission spectrum, exhibits an intense emission peak due to ⁵D₀ → ⁷F₂ transition at 616 nm, which indicates that the Eu³⁺ ion occupies a non-centrosymmetric site in the host lattice. These materials could find application for use as lamp phosphors in the red region.     

Intense red-emitting phosphors for LED solid-state lighting

The phosphors Gd_2−xEu_x(MoO₄)₃ (x = 0.20, 0.40, 0.60, 0.80, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0), Gd_0.8−xY_xEu_1.2(MoO₄)₃ (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8) and Gd_0.2Y_0.6−xEu_1.2Sm_x(MoO₄)₃ (x = 0.02, 0.024, 0.028, 0.032, 0.036, 0.04) were prepared by solid-state reaction technique at 950 °C. The presence of the Y³⁺ and Sm³⁺ ions strengthen and broaden the absorption of the phosphors at ∼400 nm. The intense red-emitting phosphor Gd_0.2Y_0.572Eu_1.2Sm_0.028(MoO₄)₃ with orthorhombic structure was obtained. Both Eu³⁺ and Sm³⁺ f-f transition absorptions are observed in the excitation spectra, the main emission line is at 616 nm (⁵D₀ → ⁷F₂ transition of Eu³⁺) and the chromaticity coordinates (x = 0.66, y = 0.33) is very close to the NTSC standard values (x = 0.67, y = 0.33). It is considered to be an efficient red-emitting phosphor for GaN-based light emitting diode (LED).     

A yellow-emitting Ca3Si2O7: Eu phosphor for white LEDs

A series of yellow-emitting phosphors based on a silicate host matrix, Ca_3 − xSi₂O₇: xEu²⁺, was prepared by solid-state reaction method. The structure and photoluminescent properties of the phosphors were investigated. The XRD results show that the Eu²⁺ substitution of Ca²⁺ does not change the structure of Ca₃Si₂O₇ host and there is no impurity phase for x < 0.12. The SEM images display that phosphors aggregate obviously and the shape of the phosphor particle is irregular. The EDX results reveal that the phosphors consist of Ca, Si, O, Eu and the concentration of these elements is close to the stoichiometric composition. The Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be excited at a wavelength of 300-490 nm, which is suitable for the emission band of near ultraviolet or blue light-emitting-diode (LED) chips. The phosphors exhibit a broad emission region from 520 to 650 nm and the emission peak centered at 568 nm. In addition, the shape and the position of the emission peak are not influenced by the Eu²⁺ concentration and excitation wavelength. The phosphor for x = 0.045 has the strongest excitation and emission intensity, and the Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be used as candidates for the white LEDs.     

The photoluminescence properties of Y2O3:Eu prepared by surfactant assisted co-precipitation-molten salt synthesis

Y₂O₃:Eu³⁺ red phosphors were prepared by surfactant assisted co-precipitation-molten salt synthesis method. The effects of surfactant content and annealing temperature on the structure and luminescence were investigated by X-ray diffraction and fluorescence spectrophotometer. The use of surfactant reduces the impurities on the surface of particles and promotes the reaction. The color purity of as-prepared Y₂O₃:Eu³⁺ red phosphors is improved with the presence of surfactant. In the excitation spectra, two strong bands at 394 and 466 nm are attributed to ⁷F_0,1-⁵L₆, ⁷F_0,1-⁵D₂ transitions of Eu³⁺ ions respectively. With the excitation of 394 or 466 nm, the as-fabricated samples reveal excellent red emission as high as that of samples monitored by 254 nm. Thus, the Y₂O₃:Eu³⁺ is a promising red phosphor for ultraviolet-visible light-emitting diodes.     

Hydrothermal synthesis and vacuum ultraviolet-excited luminescence properties of novel Dy-doped LaPO4 white light phosphors

Novel LaPO₄:Dy³⁺ white light phosphors with monoclinic system were successfully synthesized by hydrothermal method at 240 °C. The strong absorption at around 147 nm in excitation spectrum was assigned to the host absorption which suggested that the vacuum ultraviolet-excited energy was efficiently transferred from the host to the Dy³⁺ ion. The f-d transition of Dy³⁺ ion was observed locating at 182 nm. Under 147 nm excitation, La_1−xPO₄:xDy³⁺ phosphor exhibited two emission bands locating at 571 nm (yellow) and 478 nm (blue) which corresponded to the hypersensitive transitions ⁴F_9/2-⁶H_13/2 and ⁴F_9/2-⁶H_15/2. It was the two emission bands that lead to the white light.     

A novel single-phased white light emitting phosphor of Eu ions-doped Ca2LaTaO6

A novel single-phased white light emitting phosphor, Ca₂(La_1−xEu_x)TaO₆ (x = 0.001–0.7), was synthesized using a vibrating milled solid state reaction. The results indicate that the emission spectra of Ca₂LaTaO₆:Eu³⁺ samples exhibit a series of shaped peaks assigned to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions under an excitation of 395 nm. The characteristic peaks of Eu³⁺ ion intra-4f transitions from excited states to lower levels include ⁵D₃ → ⁷F_J (J = 1, 2, 3), ⁵D₂ → ⁷F_J (J = 0, 1, 2, 3), ⁵D₁ → ⁷F_J (J = 1,2,3), and ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions. The higher level ⁵D_J (J = 1, 2, 3) emission depends on the concentration of Eu³⁺ ions. The emission spectra shows a completely different ratio between the ⁵D_3,2,1 blue-green emission and ⁵D₀ red emission for lower and higher Eu³⁺ concentrations. For lower Eu³⁺ ion concentrations, the dominant transition of Ca₂(La_1−xEu_x)TaO₆ phosphors are ⁵D_3,2,1,0 → ⁷F_J emissions, whereas the dominant transitions are ⁵D₀ → ⁷F_J emissions for higher Eu³⁺ ion concentrations. The chromaticity coordinate of the Ca₂(La_1−xEu_x)TaO₆ phosphor varies with the Eu³⁺-doped concentrations from white, to reddish orange, and red. Thus, this type of phosphor may be potentially applicable as a white light emitting phosphor for ultraviolet light-emitting diodes.     

Novel Dy-doped Ca2Gd8(SiO4)6O2 white light phosphors for Hg-free lamps application

The luminescent properties of Ca₂Gd_8(1−x)(SiO₄)₆O₂:xDy³⁺ (1% ≤ x ≤ 5%) powder crystals with oxyapatite structure were investigated under vacuum ultraviolet excitation. In the excitation spectrum, the peaks at 166 nm and 191 nm of the vacuum ultraviolet region can be assigned to the O²⁻ → Gd³⁺, and O²⁻ → Dy³⁺ charge transfer band respectively, which is consistent with the theoretical calculated value using Jφrgensen's empirical formula. While the peaks at 183 nm and 289 nm are attributed to the f-d spin-allowed transitions and the f-d spin-forbidden transitions of Dy³⁺ in the host lattice with Dorenbos's expression. According to the emission spectra, all the samples exhibited excellent white emission under 172 nm excitation and the best calculated chromaticity coordinate was 0.335, 0.338, which indicates that the Ca₂Gd₈(SiO₄)₆O₂:Dy³⁺ phosphor could be considered as a potential candidate for Hg-free lamps application.     

Luminescence investigation of Eu activated molybdates red phosphors and their applications in near-UV light-emitting diodes

The red phosphors, Na₅La_1−xSm_x(MoO₄)₄ and Na₅Eu_1−xSm_x(MoO₄)₄, were prepared by solid-state reaction technique at high temperature. Their structure and photo-luminescent properties were investigated. The excitation bands around 400 nm of these phosphors are broadened by Sm³⁺-Eu³⁺ co-doping. And the possible energy transfer process from Sm³⁺ to Eu³⁺ in these compounds is also discussed briefly. The phosphor Na₅Eu_0.90Sm_0.10(MoO₄)₄ exhibits efficient red-emitting with broadened absorption around 400 nm and appropriate CIE chromaticity coordinates (x = 0.66, y = 0.34), bright red light can be observed from the red LED based Na₅Eu_0.90Sm_0.10(MoO₄)₄.