Calibration and validation of a dynamic model for water quality in combined sewer retention tanks

As the integrated management of urban wastewater systems becomes more and more popular, the development of wastewater management subsystem models appears essential to improve the understanding of the pollutant dynamics and their interactions. In such a context, a review of the literature reveals a lack of efficient models describing the dynamics of the water quality stored in off-line retention tanks. A model has thus been proposed based on the fractionation of suspended solids into three classes according to the particle settling velocity distribution measured in the field using the ViCAs settling test. In this paper, a calibration methodology is developed and full-scale field data sets from three different events are used for 1) calibrating this new dynamic retention tank model (two data sets); and 2) validating that model on the last data set. The results show a good agreement between observed and simulated data both for the total suspended solids and the total chemical oxygen demand.     

Organic matter transport and degradation in the river Seine (France) after a combined sewer overflow

The impact of a combined sewer overflow (CSO) upon receiving waters has been studied in the river Seine during Summers 1995 and 1996. Three main events have been monitored with special attention paid to the computation of oxygen, carbon and suspended solids budgets. Bacterial biomass and bacterial production rates have been measured to provide a more accurate understanding of the carbon cycle of the river Seine. Oxygen consumption inside the polluted water masses was totally due to the activity of large bacteria discharged into the river by the CSO, the activity of native small bacteria did not significantly increase after CSOs. Suspended solids issued from the CSO very quickly settles in this deep, slowly flowing river. However, discharged dissolved organic carbon (DOC) cannot account for the observed oxygen depletions, the additional carbon source could be phytoplankton or deflocculated/degraded particulate organic matter.     

Assessing methods for predicting green roof rainfall capture: A comparison between full-scale observations and four hydrologic models

To optimize the application of green roof technology, there is a need to quantify stormwater mitigation in advance of green roof construction. This study contributes toward meeting this need by assessing the utility of four hydrologic models for predicting green roof rainfall capture, including the: (1) curve number method, (2) characteristic runoff equation, (3) Hydrological Evaluation of Landfill Performance (HELP V3.9D) model, and (4) Storm Water Management Model (SWMM V5.1). Modeling results were compared to over twenty-four months of observed runoff data, collected between June 2011 and December 2013, from two full-scale green roofs in New York City (NYC). Both the curve number method and characteristic runoff equation had the highest Nash-Sutcliffe efficiency index (NSEI) between modeled and observed cumulative runoff depth per event (NSEI = 0.97) due to parameter calibration requirements, where error was mainly due to variations in green roof antecedent moisture conditions. The HELP model was originally intended for evaluation of a continuous landfill cover. As a result, HELP's inability to account for the non-vegetated areas on green roofs caused underestimation of runoff depth for most events (NSEI = 0.84). Alternatively, the SWMM model tended to overestimate event runoff depth (NSEI = 0.94), thought to be the result of its storage term parameterization. Model assessments point to the need for more robust parameter estimation methods, particularly for inputs that are statistical or difficult to measure directly, to improve pre-development accuracy of green roof performance models.     

Landfill side slope lining system performance: A comparison of field measurements and numerical modelling analyses

Low permeability engineered landfill barriers often consist of a combination of geosynthetics and mineral layers. Even though numerical modelling software is applied during the landfill design process, a lack of data about mechanical performance of landfill barriers is available to validate and calibrate those models. Instrumentation has been installed on a landfill site to monitor multilayer landfill lining system physical performance. The lining system comprises of a compacted clay layer overlaid by high density polyethylene geomembrane, geotextile and sand. Data recorded on the site includes: geosynthetic displacements (extensometers), strains (fibre optics, Demec strain gauges, extensometers) and stresses imposed on the liner (pressure cells). In addition, temperature readings were collected by a logger installed at the surface of the geomembrane, at the clay surface using pressure cell thermistors and air temperature using a thermometer. This paper presents readings collected throughout a period of three years and compares this measured performance with the corresponding numerical modelling of the lining system for stages during construction. Numerical modelling predictions of lining system behaviour during construction are comparable with the measurements when the geosynthetics are covered soon after placement, however, where the geosynthetics are left exposed to the sun for an extended period of time, in situ behaviour of the geosynthetics cannot be replicated by the numerical analysis. This study highlights the significant influence of the effect of temperature on geosynthetics displacements. A simple thermal analysis of the exposed geosynthetics is used to support the explanation for observed behaviour.     

Numerical modelling of industrial indoor environments: A comparison between different turbulence models and supply systems supported by field measurements

Ventilation, heating and cooling systems in industrial premises are important issues as they are related to both energy cost and indoor climate management and the health of the premises’ occupants. The present paper has two aims: (1) to evaluate the performance of Computational Fluid Dynamics (CFD) for planning new or renovating existing industrial ventilation systems, and (2) to evaluate the performance of two different supply principles in a contaminant-intensive process with temperature and density stratification.     

Interaction between surface structures and tunnelling in sand: Centrifuge and computational modelling

Tunnelling in urban areas requires a careful estimation of the consequence of soil settlements on existing buildings. In this paper the interaction between the excavation of a tunnel in sand and surface structures is investigated. A two dimensional finite element model is presented and validated through comparison with centrifuge test results, both with and without structures. The model is then used to perform a sensitivity study on the effect of building weight on soil movements and structural deformations. The results of the validation indicate that assuming a no-tension interface between the soil and the structure is essential to capture the soil–structure interaction that was experimentally observed. The parametric analyses show that the relation between the building stiffness and the tunnelling-induced deformations depends on the building weight.     

Evaluation of Po River water quality in Torino (Italy): Effects of diffuse and local point loads

The aim of this paper is to examine the Po River water quality in a small stretch in Piedmont (northern Italy). In this stretch a large pollution load, derived from the wastewater treatment plant of Torino area (more than 2 million inhabitants), is discharged and diluted in the water. In this study this load has been quantified and modeled in order to understand the sources, destinations and effects of the emitted pollutants. The objective was to determine the impact produced by the Torino Wastewater Treatment Plant on the quality of the water, based on various hydrological conditions and the possible intervention on the point and diffuse loads.     

Lead isotopic signatures in Antarctic marine sediment cores: A comparison between 1 M HCl partial extraction and HF total digestion pre-treatments for discerning anthropogenic inputs

Sensitive analytical techniques are typically required when dealing with samples from Antarctica as even low concentrations of contaminants can have detrimental environmental effects. Magnetic Sector ICP-MS is an ideal technique for environmental assessment as it offers high sensitivity, multi-element capability and the opportunity to determine isotope ratios. Here we consider the Pb isotope record of five marine sediment cores collected from three sites in the Windmill Islands area of East Antarctica: Brown Bay adjacent to the current Australian station Casey, Wilkes near the abandoned US/Australian Station and McGrady Cove lying midway between the two. Two sediment pre-treatment approaches were considered, namely partial extraction with 1 M HCl and total dissolution involving HF. Lead isotope ratio measurements made following sediment partial extraction provided a more sensitive indication of Pb contamination than either Pb concentrations alone (irrespective of sample pre-treatment method) or isotope ratios made after HF digestion, offering greater opportunity for discrimination between impacted and natural/geogenic samples and sites. Over 90% of the easily extractable Pb from sediments near Casey was anthropogenic in origin, consisting of Pb from major Australian deposits. At Wilkes impact from discarded batteries with a unique isotopic signature was found to be a key source of Pb contamination to the marine environment with ~ 70-80% of Pb being anthropogenic in origin. The country and source of origin of these batteries remain unknown. Little evidence was found suggesting contamination at Wilkes by Pb originating from the major US source, Missouri. No definitive assessment could be made regarding Pb impact at McGrady Cove as the collected sediment core was of insufficient depth. Although Pb isotope ratio signatures may indicate anthropogenic input, spatial concentration gradients at nearby Brown Bay suggest contamination at McGrady Cove is unlikely. We recommend Pb isotopic analysis following 1 M HCl partial extraction pre-treatment as a powerful and sensitive method for tracing Pb contamination in marine sediments.     

Relationship between landscape visual attributes and spatial pattern indices: A test study in Mediterranean-climate landscapes

The analysis of the relationships between landscape visual quality and landscape structural properties is an active area of environmental perception research. The aim of this study was to determine the relationship between landscape spatial pattern and the rating of visual aesthetic quality. Eight landscape photographs were evaluated for 11 visual attributes by 98 respondents. The scores obtained for these 11 attributes were subjected to principal components analysis in order to summarize the qualities used by the respondents and thus determine their visual preferences. For each photograph, three window sizes were defined (with respect to a landcover map) to cover the different areas corresponding to the visual field (foreground, mid-ground and background). The landscape spatial structure for each window was analyzed using spatial metrics. The correlation between each dimension and the spatial pattern indices of the landscape were then calculated. Positive correlations were obtained between visual aesthetic quality and a number of landscape pattern indices. The results suggest that landscape heterogeneity might be an important factor in determining visual aesthetic quality.     

Correlation between Negotiated Rents and Neighbourhood Quality: A Case Study of Two Cities in Sweden

The aim of this paper is to analyse whether or not differentiated rents reflect differences in neighbourhood quality in housing of similar quality and age in two target cities in Sweden. The system for rent setting in Sweden is partly based on a process of negotiation in which the annual change in actual rents is an outcome of negotiations between the local branch of the Swedish Union of Tenants and local municipal housing companies. One possible outcome of these negotiations could be change to the rental structure in the different neighbourhoods within the municipality. By allowing differences in negotiated rent outcomes in different neighbourhoods, a better relationship of rent level to tenant perception of neighbourhood quality can be achieved. It is the understanding of the authors that in a number of local-housing-market rent negotiations over the last decade, the parties involved have agreed on the need for and have consciously aimed towards making such adjustments. In this paper, regression analysis has been used to analyse data about rent levels for residential units from two cities in Sweden, namely Gothenburg and Luleå. It can be concluded that differentiated rents are indeed present, hence the existing rent-setting system in Sweden can be used to improve the relationship between rental structure and neighbourhood quality.     

Associations between household renovation and rhinitis among preschool children in China: A cross-sectional study

During 2010-2012, we surveyed 40,010 3- to 6-year-old children in seven Chinese cities (Beijing, Taiyuan, Urumqi, Shanghai, Nanjing, Changsha, and Chongqing). Their parents reported information on household renovation, including the timing of renovation and the choice of materials for walls and floors in the child's room, and the incidence of their child's rhinitis. Multivariate and two-level (city-child) logistic regression analyses yielding adjusted odds ratios (AOR) with 95% confidence intervals were performed. Sensitivity analyses stratifying data for location and economic level were also performed. About 48.0% of the children had ever had allergic rhinitis, 41.2% had current allergic rhinitis, and 9.0% had had doctor-diagnosed rhinitis. Exposure to household renovation during early lifetime (birth to 1-year-old) had an AOR of 1.43 (1.04-1.9) for allergic rhinitis. The incidence of allergic rhinitis was significantly different in children exposed to different floor and wall covering materials. Floor or wall covering material composed of organic materials significantly increased the risk of childhood allergic rhinitis compared with tile flooring or lime wall covering. Oil paint had an AOR of 1.66 (1.28-2.14) for diagnosed rhinitis compared with lime wall covering. Adding new furniture the year before pregnancy was associated with an AOR of 1.18 (1.10-1.27) and 1.18 (1.11-1.25) for lifetime and current rhinitis. Solid wood or tiles/ceramic as floor materials, and using wallpaper, oil paint, or emulsion panels as wall materials were risk factors for doctor-diagnosed rhinitis. Sensitivity analyses showed that children living in southern or higher economic level China cities were more likely to have allergic rhinitis with household renovation.     

Exploring the relationship between viscous bulking and ammonia-oxidiser abundance in activated sludge: A comparison of conventional and IFAS systems

This study investigated the nature of viscous sludge bulking within a molasses-fed integrated fixed-film activated sludge (IFAS) and conventional activated sludge (AS) plant by routinely measuring the total carbohydrate and protein fractions of the mixed liquor (ML). The impacts of sludge settleability and plant performance on the relative abundance of ammonia-oxidising bacteria (AOB) (Nitrosomonas oligotropha-cluster) were also investigated using quantitative polymerase chain reaction (qPCR). Results showed that sludge volume index (SVI) correlated positively with the amount of ML total carbohydrate in both the IFAS and traditional AS plants, highlighting the influential role that ML polysaccharide concentration plays on sludge settleability in these reactors. Results also revealed a negative relationship between the AOB/total Bacteria ratio and SVI, demonstrating that a poor settling sludge generally coincided with periods of relatively low AOB abundance. The existence of these relationships suggests that readily available organic carbon (molasses) was likely to have been present in excess in these systems. Our qPCR results also showed that concentrations of both AOB and total Bacteria genomic copies detected within the ML of the IFAS and conventional AS plants were remarkably similar. For the IFAS system, results showed that the ML supported an equivalent number of AOB (per gram of biomass) to that detected on the plastic IFAS media carriers, suggesting that the suspended biomass fraction plays an equally important role in the overall nitrification performance of these systems. Interestingly, large observed variations in AOB and AOB/total Bacteria ratio measured within both the ML and IFAS media carriers had no measurable impact on the apparent nitrification performance of these systems; indicating the presence of some excess or ‘reserve’ nitrifying capacity above that which is required for effective plant performance. Results presented here also constitute the first known side-by-side comparison of the distribution of AOB in IFAS and conventional racetrack-like AS plants at the full-scale level.     

Associations between daily cooking duration and the prevalence of diabetes and prediabetes in a middle‐aged and elderly Chinese population: A cross‐sectional study

Experimental and epidemiological studies indicated that ambient air pollution was positively associated with diabetes. Few studies investigated the associations between household air pollution, for example, daily cooking duration and diabetes or prediabetes. We conducted a cross‐sectional study to investigate the associations of daily cooking duration with the prevalence of diabetes and prediabetes among a middle‐aged and elderly population. A total of 26 089 individuals (11 250 males and 14 839 females) derived from the Dongfeng‐Tongji cohort study were included. Daily cooking duration was assessed by questionnaire. Diabetes and prediabetes were identified according to the criterion of American Diabetes Association. No significant association was observed between daily cooking duration and the prevalence risk of diabetes (odds ratio[OR] = 0.97, 95% confidence interval[CI]: [0.81‐1.16], P for trend = .74); however, longer daily cooking duration was associated with higher prevalence risk of prediabetes (OR = 1.26, 95% CI: 1.07‐1.47; P for trend = .003) and hyperglycemia (OR = 1.21, 95% CI: 1.05‐1.41; P for trend = .005). Our study suggested that daily cooking duration was not associated with diabetes but with higher prevalence risk of prediabetes/hyperglycemia in a middle‐aged and elderly Chinese population.     

Heat and cold stresses in different climate zones across China: A comparison between the 20th and 21st centuries

Summer and winter discomfort in terms of heat and cold stresses in the nine major architectural climate zones and sub-zones across China in the 21st century were investigated using predictions from general circulation models for the low and medium emissions scenarios. For the six severe cold and cold climate zones in the north, reductions in cumulative cold stress outweighed the increase in cumulative heat stress resulting in an overall decreasing trend in the annual cumulative stress, and vice versa for the other three warmer climate zones in the south. Compared with the 20th century, significant reduction in the cumulative cold stress was observed across the six zones in severe cold and cold climates, ranging from 15.8 in cold-III to 42.3 in severe cold-II. There were modest increases in the cumulative heat stress from 0.3 in cold-II to 12.3 in cold-III. For the warmer climates in the south, reduction in cumulative cold stress ranged from 7.6 in hot summer and warm winter (HSWW) to 10.3 in hot summer and cold winter, while cumulative heat stress increased from 9.9 in the mild zone to 30.6 in HSWW. A reduction in cold stress would result in less winter heating and an increase in heat stress more cooling requirement.     

The social benefits of restoring water quality in the context of the Water Framework Directive: A comparison of willingness to pay and willingness to accept

The Water Framework Directive (WFD) is by far the most important piece of water legislation in Europe for the coming decades. Its main aim is to achieve “good ecological status” for all water resources by 2015. The economic valuation of the non-market benefits derived from improving water quality is an important input in assisting the design and implementation of efficient and effective water management policies. In this study, the contingent valuation method has been applied with a double purpose. On the one hand, we have estimated the value of a hypothetical improvement in water quality of a river asking individuals about their willingness to pay, and on the other hand, the issue of exemptions contemplated in the WFD has been addressed surveying people on their willingness to accept compensation if projected improvements were not carried out. Finally, a comparison of costs and benefits in a cost-benefit framework shows that the net present value of the water quality policy is positive both if we consider willingness to pay estimates as willingness to accept estimates, therefore this policy appears desirable from a social perspective.