基于网络编码的无线单跳传输框架的研究与实现

为了解决无线链路易出错从而降低传输效率以及由于重传导致数据流间传输不公平,基于网络编码的思想,在无线单跳传输结构下,提出了基于编码组的传输模型,并根据中心站点的传输数据不同,分为内部数据传输模型和外部数据传输模型.基于上述传输模型,提出了一种基于编码组的数据传输框架.最后通过仿真实验,分析了ARQ单播策略、FEC单播策略和编码组传输框架的传输延迟,同时还对它们的传输吞吐量进行分析比较,并且在节点突发出错情景下分析ARQ单播策略、FEC单播策略和基于重传的编码组传输框架的吞叶量变化.实验表明:FTCG能够提高传输效率,并且在节点突发出错情景下能有效解决由于节点突发出错而造成的系统吞吐量急剧下降问题,保证了数据传输的公平性.     

中继协作无线网络中不完美反馈下基于网络编码的重传方案

无线广播网络传输过程中,目的节点反馈信息丢失或部分丢失导致发送节点不能了解目的节点的真实接收状态.为提高不完美反馈下无线网络的重传效率,本文提出中继协作无线网络中不完美反馈下基于网络编码的重传方案.本方案基于部分可观察马尔科夫决策过程对不完美反馈下的重传过程进行建模.发送节点根据系统观测状态和最大置信度更新系统估计状态,根据数据包发送顺序,优先选择最早丢失且能够恢复最多丢包的编码包重传.目的节点缓存不可解编码包以提升编解码机会.重传过程中源节点关注目的节点请求包需求,相同情况优先选择传输可靠性较高的中继节点,以提升传输有效性.仿真结果表明,在不完美反馈下相对于传统方案,本方案可有效提高重传效率.     

一种基于散列邻域搜索网络编码的机会中继重传方法

在无线多播网络中,传统的方法没有考虑某些接收节点与源节点及其他接收节点之间可能具有更好的链路质量.为此提出了一种基于散列邻域搜索网络编码的机会中继重传方法,该方法动态选择数据分组接收情况最好的且信道质量优于源节点的接收节点作为中继,并采用散列邻域搜索网络编码策略进行其他接收节点的丢失分组重传.仿真结果表明,相对于现有的其他网络编码重传方法,该方法能有效减少平均重传次数,提高重传效率,尤其当一些接收节点因受到干扰与源节点之间的信道质量变得很差时,该方法能取得很高的重传增益.     

WiNoC中EF-ACK容错无线接口设计

无线片上网络中的无线信道面临着严重的可靠性挑战,无线路由器的容错设计对整个片上网络的传输效率有着较大的影响.本文提出一种EF-ACK容错无线接口设计,将多条确认信息配置在一个数据包内,通过无线信道传递确认信息数据包;在无线接口处设立重传数据缓冲区,以更高效的方式确认数据以及控制错误数据包的重传;另外,提出了基于网络状态的编解码控制,在网络情况较差时用BCH编码的方式提高数据的鲁棒性.实验表明,本文方案使用了较小的额外面积和功耗开销,高效地完成了对于数据的无线确认反馈,且在错误率较高时,可以保证网络中较低的网络延迟和较高的饱和吞吐量,大大提高了网络的性能.     

基于二进制网络编码的无线广播重传方法

为了提高无线广播网络中数据包的传输效率,提出了一种新的基于二进制网络编码的高效无线广播重传方法(WBRBNC).法基于数据包分布矩阵(PDM),在广播重传过程中使用一种新的数据包算法选取编码包,对这些丢包采用二进制网络编码方法进行编码,然后再进行广播,使一次广播重传可以使多个具有不同丢包的接收机受益.分析和仿真表明,该方法能有效保证接收节点的编码可解性,使重传次数显著减少,更接近于理论值,从而大大提高了传输效率.另外,该方法计算开销小,很适合应用在卫星广播网和无线传感器网等资源受限的系统中.     

基于网络编码的无线网络广播重传方法

提出了一种适用于无线广播的基于网络编码的重传方法--NCWBR,通过网络编码组合不同的丢失包进行重传.理论分析表明,该方法能保证接收节点的编码可解性,同时重传次数较原方法更优;模拟测试结果表明,与逐个重传的方法相比,NCWBR有效地减少了信息包的平均传输次数,提高了传输效率.     

半速率可逆RS码在流星突发系统中的应用

在流星突发通信中,可以采用好的编码技术来提高系统的吞吐量性能.针对流星突发信道的特点,提出了一种基于半速率可逆RS码的混合Ⅱ型ARQ,并对其性能进行了分析,给出了吞吐量的性能公式.从仿真结果可以看出,同已有的基于传统RS码的混合Ⅱ型ARQ相比,这种应用半速率可逆码的混合Ⅱ型ARQ可以使吞吐量性能获得较大的提高.     

一种改进的不限重传次数的HARQ重传方案

为了保证数据在无线衰落信道条件下的可靠传输,产生了联合前向纠错编码(FEC)与自动请求重传(ARQ)的混合ARQ(HARQ)技术。HARQ有多种重传方案,本文针对HARQ的无限次重传方案进行了研究,提出了一种改进的基于RCPT码的HARQ重传方案,并分别与传统RCPT-HARQ方案在瑞利快衰落、慢衰落信道下进行仿真比较,仿真结果显示出改进方案在慢衰落信道条件下获得了更高的通过率。     

无线传感器网络中基于切换与保持节点选择的协同ARQ协议

提出了一种基于切换与保持节点选择的协同ARQ协议,该协议在确保无线传输可靠性的同时能获得较高的能量效率.建立了一种马尔科夫链模型,在此基础上分析了系统的吞吐量性能;基于无线传感器网络中一种广泛使用的能耗模型,以系统能效为指标分析比较了所提协议与传统ARQ协议的性能,并讨论了中继位置对系统能效的影响.基于Monte Carlo仿真,讨论了所提协议和传统ARQ协议的吞吐量和能效性能.数值和实际仿真结果证实了所给吞吐量模型的有效性;同时仿真比较表明所提协议能获得相比传统ARQ更优的吞吐量和能效性能.     

无线Mesh网中基于网络编码的多路径TCP研究

在无线多跳网络中,本地重传和网络编码已经被成功地应用到多路径技术上以增加吞吐量并减少丢包。然而,在提高UDP传输性能的同时,也产生了数据包重排序和延迟等副作用,严重影响了TCP性能。针对此问题,主要提出一种基于网络编码的多路径传输方案NC-MPTCP,即在无线mesh网络的多条路径中引入网络编码、执行拥塞控制以及使用一个基于信用的方法控制节点的传输速率,提高网络的吞吐量以及增加网络传输的可靠性。该方案使用一个简单的算法,评估丢包率以及发送线性组合数据包的速率,用来降低目的节点的数据包解码延迟和防止TCP的超时重传。仿真结果表明设计的NC-MPTCP有效。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.