Multipath optical thermometry realized in CaSc2O4: Yb3+/Er3+ with high sensitivity and superior resolution

Design and fabrication of contactless optical thermometer with rapid and accurate performance has become a research hotspot in recent years. Herein, CaSc₂O₄: Yb³⁺/Er³⁺ is employed as the intermediary for temperature sensing under the excitation of 980 nm, which is proven to afford an ultra-sensitive and high-resolution optical thermometry in multiple ways based on the fluorescence intensity ratio (FIR) technology. The optimal thermal sensing behaviors are realized by the FIR of Er³⁺:²H_11/2 → ⁴I_15/2 to ⁴S_3/2 → ⁴I_15/2 transition, which has a relative sensitivity of 1184/T² and a minimal resolution of 0.03 K along with a maximal absolute error of 0.96 K. Besides that, the FIR between the thermally coupled Stark sublevels of Er³⁺:⁴F_9/2 manifold (FIR_R) as well as that of Er³⁺: ⁴I_13/2 manifold (FIR_N) can also provide excellent optical thermometry. The relative sensitivity of FIR_R-based and FIR_N-based optical thermometers are calculated to be 402/T² and 366/T², respectively, with a same minimal resolution of 0.09 K, which possess the potential to be used for biomedicine due to the inherent advantage of their operating wavelengths located in the biological window. The results demonstrate that CaSc₂O₄: Yb³⁺/Er³⁺ is a promising candidate for temperature sensing with multipath, high sensitivity, and superior resolution.     

Influence of Cr3+ on yellowish-green UC emission and energy transfer of Er3+/Cr3+/Yb3+ tri-doped zinc silicate glasses

In this paper, we study the influence of Cr³⁺ on yellowish-green upconversion (UC) emission and the energy transfer (ET) of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ (SZNL) zinc silicate glasses under excitation of the 980 nm laser diode (LD). The influence of Cr³⁺ on enhancing the red UC emission of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ zinc silicate glasses under the excitation of 980nm LD was also investigated. The ET processes between Yb³⁺, Cr^3+, and Er³⁺, together with the combination of Yb³⁺-Cr³⁺-Er³⁺, which led to the green UC emission intensity of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ zinc silicate glasses bands centered at ~546 nm have been significantly enhanced. By increasing the concentration of Cr³⁺ from 0 up to 5 mol.%, we can locate the Commission Internationale de l'éclairage (CIE) 1931 (x; y) chromaticity coordinates for UC emissions of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in the central position of the yellowish-green color region of CIE 1931 chromaticity diagram. Besides, the ET processes between the Yb³⁺, Cr³⁺, and Er³⁺ are also proposed and discussed.     

Dual-mode optical thermometry and multicolor anti-counterfeiting based on Bi3+/Er3+ co-activated BaGd2O4 phosphor

Here, Bi³⁺, Er³⁺ co-activated gadolinium phosphors with multimode emission properties are prepared, which can emits blue, green, and orange light under the excitation of ultraviolet, 980 and 1550 nm, respectively. Moreover, BaGd₂O₄:Bi³⁺, Er³⁺ can show multicolor luminescence under different excitation conditions, such as pump light source, ambient temperature, working current, and other factors. Based on the dynamic luminescence characteristics, the dynamic anti-counterfeiting experiments are designed based on the phosphor. At the same time, the material also shows multimode temperature sensing characteristics. Under the excitation of 980 nm laser, three strong up-conversion signals Er³⁺ ions are generated at 528 nm (²H_11/2), 555 nm (⁴S_3/2), and 668 nm (⁴F_9/2), which have different temperature dependences. Based on the fluorescence intensity ratio between thermal-coupled energy levels (²H_11/2/⁴S_3/2) and nonthermal-coupled energy levels (²H_11/2/⁴F_9/2) of Er³⁺ ions, respectively, the dual-mode temperature thermometer was constructed with high-temperature sensitivity. In addition, the fluorescence lifetime of Bi³⁺ ions also has a strong temperature dependence, which can be used as another temperature detection signal, greatly improving the stability of thermometers under harsh conditions. Therefore, the material has a bright prospect in the field of anti-counterfeiting and temperature sensing.     

Improved photoluminescence and multi-mode optical thermometry of Er3+/Yb3+ co-doped (Ba,Sr)3Lu4O9 phosphors

Contactless optical thermometers have attracted extensive attentions for applications in scientific research and technological fields due to their apparent advantages. Herein, a novel sequence of Ba_3-xSr_xLu₄O₉ (B_3-xS_xLO):Er³⁺/Yb³⁺ phosphors were successfully prepared to investigate the temperature sensing property. By establishing energy transfer from Yb³⁺ to Er³⁺ and regulating the local lattice environment, up-conversion luminescence of Er³⁺ is dramatically improved when excited by 980 nm laser. This can effectively promote signal-noise ratio and reduce the errors in temperature detection. Furthermore, a multi-mode optical thermometry, which includes the fluorescence intensity ratio (FIR) from two thermally coupled levels of ²H_11/2/⁴S_3/2, FIR based on non-thermally coupled system of ²H_11/2/⁴F_9/2 and fluorescence lifetime of ⁴S_3/2 state of Er³⁺, was explored systematically. The fabricated samples exhibit the superior temperature measurement performances containing wide temperature-sensing range, superior signal discriminability, high sensitivity and favorable repeatability, indicative of the enormous utilization prospects of B_3-xS_xLO:Er³⁺/Yb³⁺ for thermometry.     

Dual-activator luminescence of LuAG:Mn4+/Tb3+ phosphor for optical thermometry

Mn⁴⁺ and Tb³⁺ singly doped and Mn⁴⁺/Tb³⁺ codoped lutetium aluminum garnet (Lu₃Al₅O₁₂, or simply LuAG) phosphors were synthesized and investigated for the application of optical thermometry. X-ray powder diffraction and luminescence spectroscopy measurements were performed on all samples to analyze their crystal phases and optical properties. In particular, temperature-dependent luminescence of the LuAG:Mn⁴⁺/Tb³⁺ sample was measured at the temperature range of 270–420 K. The results showed that the luminescence intensity of Mn⁴⁺ has gone through a remarkable decline while the luminescence of Tb³⁺ has an only insignificant change with the rise of temperature which leads to a dramatic decrease in the fluorescence intensity ratio (FIR) between the two activator Mn⁴⁺ and Tb³⁺. Further analysis showed that the LuAG:Mn⁴⁺/Tb³⁺ sample used for temperature sensing has a high relative sensitivity with maximum value of 4.3% K⁻¹ at 333 K. Our research indicated that this LuAG:Mn⁴⁺/Tb³⁺ material is a promising candidate for FIR-type optical temperature sensing.     

Broad-scope dual-mode modulation thermometry based on up-conversion phosphor GaNbO4: Yb3+/Er3+

Fluorescence temperature measurement technology has set off another upsurge in non-contact temperature measurement, but still suffers from the large error for single-mode thermometry. Herein, in a broad temperature range of 93–633 K, a dual-mode modulation thermometry based on up-conversion phosphor of GaNbO₄:Yb³⁺/Er³⁺ is realized with the maximum relative sensitivity (S_r) of 11.7% K⁻¹ (93 K) and 13.1% K⁻¹ (123 K), respectively. GaNbO₄:Yb³⁺/Er³⁺ phosphors were synthesized by high temperature solid-state method. The structure, surface morphology and the optical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The fluorescence intensity ratio (FIR) readout method based on Er³⁺ thermal-coupled energy level (TCL) and non-thermal-coupled energy level (NTCL) was used to achieve the dual-mode temperature measurement with high temperature resolution and good repeatability in GaNbO₄:5 mol% Yb³⁺ and 5 mol% Er³⁺ phosphors. All the results show that GaNbO₄:Yb³⁺/Er³⁺ phosphors have great application potential in high sensitivity broadband thermometry.     

Morphology control and temperature sensing properties of micro-rods NaLa(WO4)2:Yb3+,Er3+ phosphors

Uniform spindle-like micro-rods NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors are prepared by the solvothermal method in the text. Controllable morphology of NaLa(WO₄)₂ crystal can be obtained by adjusting the prepared temperature, PH value, complexing agent content, and solvent ratio. Uniform NaLa(WO₄)₂:Yb³⁺,Er³⁺ micro-rods of 1.8 μm in length and 0.5 μm in width are synthesized at a low temperature of 120°C. The prepared NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors present green upconversion luminescence under 980 nm excitation, luminescence intensity reaches to maximum at the Yb³⁺ and Er³⁺ concentration of 6 and 2 mol%. The temperature performance of the NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors are evaluated based on thermal coupling technology. Temperature dependence of the two green emissions ratio of Er³⁺ ion is obtained, and the sensitivity of the sample can be calculated, the maximum sensitivity of NaLa(WO₄)₂:Yb³⁺,Er³⁺ is up to 0.019 K⁻¹ at the sample temperature of 564 K.     

BiLaWO6: Er3+/Tm3+/Yb3+ phosphor: Study of multiple fluorescence intensity ratiometric thermometry at cryogenic temperatures

Highly thermally stable Er³⁺/Tm³⁺/Yb³⁺ tri-doped bismuth lanthanum tungstate phosphors were prepared by high temperature solid-state reaction method. The structural and morphological properties of the prepared phosphors were analysed by X-ray diffraction (XRD), Raman spectroscopy and Scanning electron microscopy (SEM) coupled with energy dispersion spectrum (EDS). Visible upconversion (UC) luminescence was measured by exciting the phosphors with 980 nm laser radiation. The dependence of the UC intensity of each emission band of Er³⁺ and Tm³⁺ ions as a function of temperature in the range from 30 to 300 K was monitored. Fluorescence intensity ratios (FIR) of thermally coupled levels (TCL) and non-thermally coupled levels (NTCL) were analysed and verified with appropriate theoretical validation. The absolute (S_A) and relative sensitivities (S_R) were estimated and compared with the reported systems. In the present case of BiLaWO₆: Er³⁺/Tm³⁺/Yb³⁺, S_R (0.43 % K^?1) related to TCL of Er³⁺ UC is found to have maximum sensitivity compared to any of the NTCL combinations at 300 K. From this study we inferred that the S_R values estimated from NTCL are smaller than that of TCL involved in BLW: Er³⁺/Tm³⁺/Yb³⁺ phosphor. The temperature dependent CIE color coordinates were also evaluated in the cryogenic temperature region.     

Near infrared light-induced photocurrent in NaYF4:Yb3+, Er3+/WO2.72 composite film

Spectral conversion technology based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanoparticles was extensively used to improve photovoltaic conversion efficiency of solar cells. However, the response mismatch between absorption of semiconductors and upconversion luminescence (UCL) limits the application of spectral conversion technology. Nonstoichiometric WO_2.72 nanoparticles display the broad absorption from visible to near-infrared region due to the presence of oxygen vacancy, which is overlapped with the UCL of NaYF₄:Yb³⁺, Er³⁺ nanoparticles. Thus, the combination between NaYF₄:Yb³⁺, Er³⁺ nanoparticles, and nonstoichiometric WO_2.72 provides a possibility for designing a novel UCL spectral converted solar cells. In this work, composite film consisted of NaYF₄:Yb³⁺, Er³⁺ nanoparticles, and WO_2.72 nanofibers was prepared. The UCL of NaYF₄:Yb³⁺, Er³⁺/WO_2.72 film was decreased in contrast to pure NaYF₄:Yb³⁺, Er³⁺ nanoparticles due to energy transfer from NaYF₄:Yb³⁺, Er³⁺ nanoparticles to WO_2.72 nanofibers. The NaYF₄:Yb³⁺, E³⁺/WO_2.72film exhibits the photocurrent generation upon the 980 nm excitation. This novel UCL spectral converted solar cells based on the broad absorption of defects in the WO_2.72 host will provide a novel view for photovoltaic devices.     

Dual-mode optical thermometry based on intervalence charge transfer excitations in Tb3+/Pr3+ co-doped CaNb2O6 phosphors

Self-calibrated temperature measurements combined with luminescence intensity ratio (LIR) and luminescence lifetime are more accurate. A dual-mode self-calibration optical thermometer was designed based on CaNb₂O₆: Tb³⁺/Pr³⁺ phosphor. The obtained sample has excellent sensitivity, with the maximum values of absolute sensitivity (S_a) and relative sensitivity (S_r) being 0.69 K^-1 at 612 K and 2.50% K^-1 at 532 K for LIR mode, and 0.0059 K^-1 at 475 K and 2.62% K^-1 at 535 K for luminescence lifetime mode, respectively. These results indicate that CaNb₂O₆: Tb³⁺/Pr³⁺ phosphor has valuable potential application for self-calibration optical temperature measurement.     

Enhanced up-conversion luminescence and optical thermometry characteristics of Er3+/Yb3+ co-doped Sr10(PO4)6O transparent glass-ceramics

In this paper, the Yb³⁺/Er³⁺ co-doped parent glass (PG) with composition (in mol%) of 30P₂O₅-10B₂O₃-38SrO-22K₂O and transparent glass-ceramics (GCs) containing hexagonal Sr₁₀(PO₄)₆O nanocrystals (NCs) were synthesized for the first time by melt-quenching method and subsequent heating treatment in air. Under 980 nm laser prompting, the GCs samples showed intense red and green up-conversion emissions compared to those characteristics for the PG sample. The emission intensities varied with Er³⁺ concentration and heat treatment conditions. Furthermore, in Yb³⁺/Er³⁺ co-doped GCs specimens, the optical thermometry was researched by means of fluorescence intensity ratio (FIR) of ⁴S_3/2 and ²H_11/2 levels. The GC sample heated at 620°C for 5 hours possessed a high relative temperature sensitivity (S_r) of 0.769% K⁻¹ at 303 K and the maximal absolute temperature sensitivity (S_a) of 5.951 × 10⁻³ K⁻¹ at 663 K, respectively. It is expected that the as-fabricated GC materials with Sr₁₀(PO₄)₆O NCs are promising efficient up-conversion materials for optical temperature sensor.     

Luminescence and optical thermometry based on silico-carnotite Ca3Y2Si3O12: Pr3+ phosphor

The photoluminescence and temperature sensitivities of Ca₃Y₂Si₃O₁₂:Pr³⁺ thermo-phosphors with silico-carnotite structure obtained by solid state reaction method were investigated. Pr³⁺ ions were accommodated in the A sites having coordination number of 9 in AB₂C₂(SiO₄)₃ to replace Y³⁺ ions. The typical sample consisted of microcrystals with an irregular structure and the surface of particles was smooth, which could enhance the luminescence due to reducing the scattering and non-radiation produced by rough surfaces. The band gap value of typical sample was about 4.01 eV. Dipole-dipole interaction could account for concentration quenching. The two thermometry strategies including normalized intensities from ³P₀→³H₄ transition and Fluorescence intensity ration (FIR) of ³P₀→³H₄/³P₁→³H₅ transitions were employed for temperature sensing in 298–573 K. The results revealed that Ca₃Y₂Si₃O₁₂:Pr³⁺ thermo-phosphors had good temperature sensitivity performance with maximum S_r of 0.59% K^?1@573 K and 0.762% K^?1@298 K in the above two methods, respectively. Hence, Ca₃Y₂Si₃O₁₂:Pr³⁺ would be a promising candidate in the field of optical thermometry.     

Simultaneous enhancement of emission and thermal sensitivity via phase transition in Gd2(MoO4)3:Yb3+/Er3+ crystals

The effects of site symmetric distortion induced by the phase transition on up-conversion emission and thermal sensing performance of Gd₂(MoO₄)₃:Yb³⁺/Er³⁺ (GMO) crystals were elaborately studied by minimizing interference from many factors. Monoclinic GMO showed a much stronger fluorescence intensity and larger fluorescence intensity ratio under the irradiation of 980 nm laser in comparison to the orthorhombic counterpart. These remarkable up-conversion properties stemmed from the low site symmetry with large site symmetric distortion in monoclinic GMO. Moreover, the thermal sensing property of the samples was assessed based on the fluorescence intensity ratio technique, where monoclinic GMO exhibited much higher maximum absolute sensitivity (S_a = 0.0257 K⁻¹ at 510 K) due to the site symmetric distortion, which was further explained by the Judd–Ofelt theory and polarizability of the chemical bond volume model. Results opened an efficient avenue for achieving highly sensitive thermometry in many daily scenarios via finely tailoring the local site symmetry.     

Synthesis and up-conversion of Er3+ and Yb3+ Co-doped LiY(MoO4)2@SiO2 for optical thermometry applications

Non-contact temperature sensors based on the fluorescence intensity ratio (FIR) have been widely investigated owing to their high sensitivity and reliable real-time monitoring. Herein, the SiO₂-coated LiY(MoO₄)₂@SiO₂:Er³⁺,Yb³⁺ phosphor was investigated as an optical thermometry material, which was synthesized using the conventional solid state reaction and coated by a facile wet chemical route. The effect of surface modification on FIR was systematically characterized by structural analyses and spectral measurements and the temperature-dependent up-conversion FIR was investigated from 303 to 603 K under a 980 nm laser excitation. The results showed that the FIR value was thermally stable and the SiO₂ coating led to a higher FIR sensitivity as well as a higher saturation threshold. This work would pave a way to design interesting optical thermometry materials in up-conversion phosphors with better properties.     

Up-conversion luminescence and optical thermometry properties of transparent glass ceramics containing CaF2:Yb3+/Er3+ nanocrystals

A series of Yb³⁺/Er³⁺ codoped transparent oxyfluoride glass ceramics with various amounts of Yb³⁺ have been successfully fabricated and characterized. Under 980 nm laser prompting, the samples produce intense red, green and blue up-conversion emissions, and the emission intensities increase with Yb³⁺ concentration and heat treatment temperature. Before losing good transparency in the visible region, optimum emission intensities are obtained for the sample with 25 mol% of Yb³⁺ at a heat treatment temperature of 680 °C. A possible up-conversion mechanism is proposed from the dependence of emission intensities on pumping power. The fluorescence intensity ratio between the two thermally coupled levels ²H_11/2 versus ⁴S_3/2 was measured with the laser output power of 57 mW to avoid the possible laser induced heating effect. The fluorescence intensity ratio values in the temperature range from 295 K to 723 K can be well fitted with the equation: A exp (−∆E/k_BT), where A = 6.79 and ∆E=876 cm⁻¹. The relative temperature sensitivity at 300 K was evaluated to be 1.4% K⁻¹. All the results suggest that the Yb³⁺/Er³⁺ codoped CaF₂ glass ceramics is an efficient up-conversion material with potential in optical fiber temperature sensing.     

Effect of B2O3 addition on structure and properties of Yb3+/Al3+/B3+-co-doped silica glasses

The homogeneous Yb³⁺/Al³⁺/B³⁺-co-doped silica glasses were prepared via a sol-gel method. The impact of B₂O₃ addition on the physical and optical properties and network structure was systematically studied. The network structure was investigated by the Fourier Transform Infrared (FT-IR), Raman spectra, and Solid State Nuclear Magnetic Resonance (SSNMR). Herein, B₂O₃ addition can continuously decrease the refractive index and density. When B₂O₃ is lower than 2 mol%, B₂O₃ addition can obviously decrease the scalar crystal field parameters, Yb³⁺ asymmetry degree, Yb³⁺ cross-sections, due to the generation of Yb–O–B bonds at the cost of partial Yb–O–Al/Si ones. When B₂O₃ is more than 2 mol%, FT-IR, Raman spectra, and SSNMR results indicate that further increased B atoms prefer to connect with Si and Al rather than Yb. Consequently, the above parameters are basically unchanged. Based on the results, an intuitive model of structure and properties evolution during the substitution of SiO₂ by B₂O₃ has been established.     

High-accuracy dual-mode optical thermometry based on up-conversion luminescence in Er3+/Ho3+-Yb3+ doped LaNbO4 phosphors

Due to the non-contact and high sensitivity, optical thermometry based on rare earth doped phosphors has been paid much attention to. Herein, dual-mode optical thermometers are designed using up-conversion luminescence of Er³⁺/Ho³⁺-Yb³⁺ doped LaNbO₄ phosphors, which were synthesized for the first time by high-temperature solid-state reaction method. The LaNbO₄:1Er³⁺:10Yb³⁺ and LaNbO₄:1Ho³⁺:10Yb³⁺ phosphors exhibit reliable and excellent thermometric performance by combining fluorescence intensity ratio and decay lifetime for self-calibration. Specifically, the maximal relative sensitivities based on fluorescence lifetime were 0.27 %K⁻¹ and 0.33 %K⁻¹ for LaNbO₄:1Er³⁺:10Yb³⁺ and LaNbO₄:1Ho³⁺:10Yb³⁺ phosphors, respectively. The maximal relative sensitivity is 1.12 %K⁻¹ when using intensity ratio between thermal coupling energy levels in LaNbO₄:1Er³⁺:10Yb³⁺ as a detecting signal. Furthermore, the maximal relative sensitivity reaches as high as 0.98 %K⁻¹ when taking advantage of special non-thermal coupling energy levels in LaNbO₄:1Ho³⁺:10Yb³⁺. These results indicate that Er³⁺/Ho³⁺-Yb³⁺ doped LaNbO₄ phosphors possess great potential in self-calibrated optical thermometric techniques.     

NaSr2Nb5O15:Yb3+, Ho3+, Tm3+ transparent glass ceramics: Up-conversion optical thermometry and energy storage property

Rare earth tri-doped precursor glasses (PGs) were prepared by traditional high-temperature melting method, and NaSr₂Nb₅O₁₅ transparent glass–ceramic (GC) was obtained by subsequent heat treatment. Results exhibit that the up-conversion emission intensity of GC is greatly enhanced compared to PG. Benefiting from the multiple emission bands from Ho³⁺ and Tm³⁺ and their different temperature dependence, multi-ratio optical temperature measurement is realized. The ultimate relative sensitivity (S_r-max) can reach 2.00% K⁻¹ between 298 and 598 K. It provides a possibility for self-reference temperature measurement. Furthermore, under the actual charging and discharge conditions, the GC heated at 750°C has great energy density (W_d = 1.15 J/cm³@600 kV/cm) and high-power density (P_d = 290.4 MW/cm³@600 kV/cm) with ultrafast discharge time (<15.8 ns). The previous results indicate that the obtained GC with good multifunctional properties is expected to be applied in the field of photoelectric conversion.     

Optical temperature sensor based on upconversion luminescence of Er3+ doped GdTaO4 phosphors

For the development of optical temperature sensor, a series of GdTaO₄ phosphors with various Er³⁺-doping concentrations (0, 1, 5, 10, 25, 35, 50 mol%) were synthesized by a solid-state reaction method. The monoclinic crystalline structure of the prepared samples was determined by X-ray diffraction (XRD). Under excitations of 980 and 1550 nm lasers, the multi-photon-excited green and red upconversion (UC) luminescence emissions of Er³⁺ were studied, and the critical quenching concentration of Er³⁺-doped GdTaO₄ phosphor was derived to be 25 mol%. By changing the pump power of laser, it was found that the two-photon and three-photon population processes happened for the UC emissions of Er³⁺-doped GdTaO₄ phosphors excited by 980 and 1550 nm lasers, respectively. Furthermore, based on the change of thermo-responsive green UC luminescence intensity corresponding to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions of Er³⁺ with temperature, the optical temperature sensing properties of Er³⁺-doped GdTaO₄ phosphor were investigated under excitations of 980 and 1550 nm lasers by using the fluorescence intensity ratio (FIR) technique. It was obtained that the maximum absolute sensitivity (S_A) and relative sensitivity (S_R) of Er³⁺-doped GdTaO₄ phosphors are as high as 0.0041 K⁻¹ at 475 K and 0.0112 K⁻¹ at 293 K, respectively. These significant results suggest that the Er³⁺-doped GdTaO₄ phosphors are a promising candidate for optical temperature sensor.     

Multi-phase glass-ceramics containing CaF2: Er3+ and ZnAl2O4:Cr3+ nanocrystals for optical temperature sensing

Oxyfluoride transparent glass-ceramics (GC) containing CaF₂ and ZnAl₂O₄ nanocrystals have been fabricated with melt-quenching method. By carrying out the heat treatment of the precursor glass (PG), Er³⁺ and Cr³⁺ were selectively partitioned into CaF₂ and ZnAl₂O₄ nanocrystals, respectively. The obtained multi-phase GC exhibited strong upconversion (UC) fluorescence of Er³⁺ as well as intense down-conversion (DC) fluorescence of Cr³⁺. Under 980 nm excitation, the green UC fluorescence of Er³⁺ due to ²H_11/2,⁴S_3/2 → ⁴I_15/2 transition and the red DC fluorescence lifetime of Cr³⁺ due to ²E, ⁴T₂ → ⁴A₂ transition were found to be highly dependent on the temperature and makes them possibly suitable for Optical Thermometry. With least-square fitting methods, the FIR of Er³⁺ from thermally coupled energy states (²H_11/2 and ⁴S_3/2) produced maximum temperature sensing sensitivity values of 0.33% K⁻¹ at 437 K and 0.36% K⁻¹ at 267 K, respectively. Similarly, fluorescence lifetime of Cr³⁺ attributed to the parity forbidden (²E → ⁴A₂) and spin allowed (⁴T₂ → ⁴A₂) produced the maximum temperature sensor sensitivity value equal to 0.67% K⁻¹ at 535 K.