Electrospinning,optical properties and white LED applications of one-dimensional CaAl12O19:Mn4+ nanofiber phosphors

Non-rare-earth, red-emitting CaAl₁₂O₁₉:Mn⁴⁺ nanofiber phosphors have been successfully prepared by an electrospinning technique followed by an annealing process. The as-prepared precursor fibers have smooth surfaces with an average diameter of 5 µm. After annealing at high temperature, the diameter of the fibers gradually reduces due to the decomposition of the organic polymers. The photoluminescence and crystalline properties of the fibers were investigated as a function of Mn⁴⁺ concentration and the annealing temperature. Under ultraviolet and blue light excitation, CaAl₁₂O₁₉:Mn⁴⁺ exhibits a characteristic red emission at 655 nm with three satellite peaks due to the ²E→⁴A₂ transition of Mn⁴⁺. The highest PL intensity is achieved at a 0.5% Mn⁴⁺ concentration and a firing temperature of 1400 °C. In comparison to CaAl₁₂O₁₉:Mn⁴⁺ prepared by a usual solid-state reaction, the luminescence of the as-prepared nanofiber phosphors in the present work has been strongly enhanced by optimizing the morphology and improving the crystallinity and phase purity. The absorption band in the blue region and a bright emission in the red region make the CaAl₁₂O₁₉:Mn⁴⁺ nanofiber phosphor a candidate for achieving high color rendering in YAG:Ce-based WLEDs. A warm WLED with a high CRI of 88.5 at a CCT of 4553 K has been successfully achieved by coating YAG:Ce with CaAl₁₂O₁₉:Mn⁴⁺ nanofiber phosphors on blue InGaN chips.     

A universal HF-free synthetic method to highly efficient narrow-band red-emitting A2XF6:Mn4+ (A = K,Na, Rb,Cs; X = Si,Ge, Ti) phosphors

Mn⁴⁺-activated fluoride red-emitting narrow-band phosphors have been successfully used in wide color-gamut white LEDs for liquid crystal display (LCD) backlights. However, highly concentrated and toxic HF is usually used in their synthesis, causing environment and safety issues. In this work, we proposed a HF-free green method, that is, using NH₄F/HCl instead of HF, to synthesize a series of A₂XF₆:Mn⁴⁺ (A = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. The microstructure, photoluminescence (PL) properties, thermal quenching, and applications of the synthesized phosphors were investigated. Using the proposed approach, the phosphors generally showed a pure phase, a particle size ranging from 5 to 45 μm, and some characteristic sharp emission lines of Mn⁴⁺ in the red spectral range. The internal quantum efficiency was varied in a broad range of 69%-94% under the 460 nm excitation, depending on the composition of the fluoride host. Among these compositions, K₂XF₆:Mn⁴⁺ (X = Ge and Ti) phosphors even had a similar external quantum efficiency (>60%) with commercial ones. By combining K₂GeF₆:Mn⁴⁺ (narrow-band red) and β-sialon:Eu²⁺ (narrow-band green) with a blue LED, a white light-emitting diode (wLED) backlight with a color gamut of 87.7% National Television System Committee Standard, color temperature of 8423 K, and a luminous efficacy of 110.8 lm/W was demonstrated. These results indicate that the synthetic method proposed in this work is universal for preparing highly efficient fluoride phosphors used in wLEDs.     

A novel scheelite-type LiCaGd(WO4)3:Eu3+ red phosphors with prominent thermal stability and high quantum efficiency

A series of LiCaGd(WO4)3 : xEu³⁺ (0 ≤ x ≤ 1.0) red phosphors with tetragonal scheelite structure were synthesized via the conventional solid-state reaction. Their crystal structure, photoluminescence excitation (PLE), and photoluminescence (PL) spectra, thermal stability and quantum efficiency were investigated. The phosphors exhibit a typical red light upon 395 nm near ultraviolet excitation, and the strongest emission peak at 617 nm is dominated by the ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The PL intensity of the phosphors gradually increases with the increase of Eu³⁺ doping concentration, and the concentration quenching phenomenon is hardly observed. The quantum efficiency and the color purity of the phosphor reach maximum values of about 94.2 and 96.6% at x = 1.0, respectively. More importantly, LiCaGd(WO₄)₃:xEu³⁺ phosphors have prominent thermal stability. The temperature-dependent PL intensity of the phosphors at 423 K is only reduced to 89.1% of the PL intensity at 303 K, which is superior to that of commercial red phosphors Y₂O₃:Eu³⁺. Finally, LiCaGd(WO₄)₃:Eu³⁺ phosphor is packaged with near ultraviolet InGaN chips to fabricate white light emitting diodes, which has a low color temperature (CCT = 4622 K) and a high color rendering index (CRI= 89.6).     

The red-emitting phosphors of Mn4+-activated A2MgWO6 (A = Ba,Sr, Ca) for light emitting diodes

A series of Mn⁴⁺ ions activated A₂MgWO₆ (A = Ba, Sr, Ca) phosphors, showing bright red emission peaks appeared around 700 nm under the excitation of 355 nm, were synthesized by the solid-state reaction. The crystal structures and photo-luminescent (PL) properties of these synthesized phosphors were deeply investigated with the aids of X-ray diffraction measurement (XRD), and the temperature dependent PL/decay curves in detail. The optimum doping concentration of Mn⁴⁺ ions in A₂MgWO₆ (A = Ba, Sr, Ca) lattices were studied through the relationship between the Mn⁴⁺ ions doping concentrations and the luminescent intensities. The thermal stability of the synthesized red-emitting phosphors was checked based on the temperature-dependent PL intensities ranging from 7 to 510 K. Comparative studies of the luminescent properties for Mn⁴⁺ ions in isostructural A₂MgWO₆ (A = Ba, Sr, Ca) lattice with double perovskite structure were studied. The results indicate that the synthesized red-emitting phosphors are the ideal choice for white light emitting diodes (W-LEDs).     

Synthesis,Structure, and Performance of Efficient Red Phosphor LiNaGe4O9:Mn4+ and Its Application in Warm WLEDs

For phosphor‐converted warm white light‐emitting diodes (WLEDs), it is essential to find highly efficient red oxide phosphors, which are better chemically stable and benign to environment and can be prepared in a much milder condition. Here, we report a red phosphor LiNaGe₄O₉:Mn⁴⁺ with a quantum yield up to 78% after systematic optimization in synthesis temperature, dopant concentration of Mn⁴⁺, and sintering time. Best performance of the phosphor can be reached when it is synthesized in a mild reaction condition, that is, at 850°C for 3 h in air. The integrated emission intensity is more than four times stronger than commercial red phosphor 3.5MgO·0.5MgF₂·GeO₂:Mn⁴⁺ (MFG:Mn⁴⁺) under a blue light excitation at 470 nm. Crystal structural analysis reveals that the high efficiency Mn⁴⁺ exhibits in the compound is mainly due to the well separation of GeO₆ groups from each other by GeO₄ tetrahedra in the neighborhood and the ideal substitution of octahedral Ge⁴⁺ site by Mn⁴⁺ in view of both size and charge matches. The high performance of the phosphor encourages us to apply the blue absorbing red phosphor to WLED, which is based on combination of a blue LED chip and YAG:Ce³⁺, and the warm perception WLED is therefore achieved with a color temperature of 3353 K.     

HF-free molten salt route for synthesis of highly efficient and water-resistant K2SiF6:Mn4+ for warm white LED

It has been one of the hot issues to prepare the red-emitting Mn⁴⁺-doped fluoride phosphors with highly efficient and waterproofness for warm white-light-emitting diodes (WLEDs) by the green and environmentally friendly method. Herein, we design a novel green molten salt route to synthesize K₂SiF₆:Mn⁴⁺ red powder using molten NH₄HF₂ salt instead of HF liquor as the reaction medium. The results show that KMnO₄ and MnF₂ could produce Mn⁴⁺ in NH₄HF₂ molten salt through a reduction reaction, and the resulting Mn⁴⁺-doped K₂SiF₆ exhibited a bright red emission peaked at 632 nm under blue light excitation. The luminescence intensity of the as-obtained product after immersing into water for 24 hours maintain nearly 100% of that before soaking and emission peak shape remains unchanged. The thermal stability of the sample was evaluated by temperature-dependent luminescence spectral intensity during heating and cooling. Furthermore, a warm white-light-emitting diodes (WLEDs) with an excellent color rendering index (Ra = 87.1), lower correlated color temperature (CCT = 3536K), and high luminous efficacy (116.99 lm·W⁻¹) was fabricated based on blue chip and K₂SiF₆:Mn⁴⁺ and commercial yellow phosphor (Y₃Al₅O₁₂:Ce³⁺).     

Characteristics of nano-sized ZnGa2O4 phosphor prepared by solution combustion method and solid state reaction method

ZnGa₂O₄ phosphors were prepared by both SCM (solution combustion method) and SSRM (solid state reaction method). The properties of the both ZnGa₂O₄ phosphors were investigated by TGA (Thermogravimetric analysis), SEM (scanning electron microscope), BET (Brunauer Emmett Teller), PL (photoluminescence) and XRD (X-ray diffraction). The particle size of SCM phosphor was about one-hundredth of SSRM phosphor. The PL intensity of SCM phosphor was about 1.5-fold higher than that of SSRM phosphor. The SCM phosphor was also tried to be doped with Mn²⁺ ions. The highest PL peak was observed with Mn²⁺ ions of 0.003 mol fraction. The peak was shifted from blue (470 nm) to green (513 nm) color. These results might be very useful for high efficiency phosphors for displays such as field emission displays and plasma display panels.     

pH dependent hydrothermal synthesis of Ca14Al10Zn6O35:0.15Mn4+ phosphor with enhanced photoluminescence performance and high thermal resistance for indoor plant growth lighting

Artificial light source for indoor cultivation has been vastly impeded by the lack of high far red emitting phosphors. Recently, Mn⁴⁺ activated phosphors were reported to be promising luminescent materials to solve above matter. In this study, controllable design of Ca₁₄Al₁₀Zn₆O₃₅:0.15Mn⁴⁺ (CAZO:0.15Mn⁴⁺) far red emitting phosphors was realized via pH assisted hydrothermal approach. The pure CAZO:0.15Mn⁴⁺ phosphors were obtained merely when the reaction pH was 1 or 2. Meanwhile, by adjusting the pH value of the reaction solution, far red emission CAZO:0.15Mn⁴⁺ phosphors with grains, sphere-like as well as aggregated bulk particles can be achieved at pH =?4, pH =?6 and pH =?10, respectively. Furthermore, the structures and morphologies depended photoluminescence (PL) performances of CAZO:0.15Mn⁴⁺ were checked. The best PL performance was found for the phosphor produced at pH =?6, while over acidic or alkaline conditions would lower the emission intensity. In addition, this phosphor also exhibit good thermal resistance which can maintain 78% initial intensity at 150?°C. The practical indoor tobacco cultivation demonstrated that CAZO:0.15Mn⁴⁺ obtained through this pH adjusted hydrothermal route is a promising phosphor for indoor plant growth lighting.     

Luminescence enhancement of Mn4+-activated double-perovskite phosphors for LEDs through a co-replacement strategy

Phosphors doped with Mn⁴⁺ ions have strong emission in the red and far-red light regions and are therefore used as red phosphors for indoor plant cultivation light-emitting diodes (LEDs) and white LEDs (w-LEDs). This paper introduces La₂Mg(Mg_1/3Ta_2/3)O₆: Mn⁴⁺ (Mg₂La₃TaO₉: Mn⁴⁺) red phosphors prepared by conventional high-temperature solid-phase method. The broad excitation band of Mg₂La₃TaO₉: Mn⁴⁺ phosphor is effectively excited by ultraviolet and blue light in the range of 250–600 nm, with the emission of 707 nm centered on far-red light. The phosphor has a high color purity of 99.07% and an internal quantum efficiency of 59.87%. To further enhance the performance of the phosphor, a cation substitution method was adopted in this paper to synthesize La₂Mg(Al_1/2Ta_1/2)O₆: Mn⁴⁺ phosphor by replacing [1/3Mg²⁺–2/3Ta⁵⁺] in La₂Mg(Mg_1/3Ta_2/3)O₆: Mn⁴⁺ with [1/2Al³⁺–1/2Ta⁵⁺]. The luminescence intensity and thermal stability of the samples were enhanced. The emission spectrum of the Mg₂La₃TaO₉: Mn⁴⁺ samples matched well with the phytochrome P_FR (phytochrome that absorbs far-red light) and is suitable for the preparation of LEDs for indoor plant cultivation. The concentration quenching effect of the samples was investigated, the main mechanism of which is the electric dipole–dipole interaction. Red LEDs and w-LEDs devices were prepared with the synthesized phosphors that produce light stably at different currents. The w-LEDs have a correlated color temperature of 5310 K and a color rendering index of 80.1. Therefore, these samples are expected to be used as red components for w-LEDs.     

Mn4+ activated dodec-fluoride red phosphor Na3Li3In2F12:Mn4+ with excellent waterproof stability for WLEDs

Mn⁴⁺ activated fluoride red phosphors, as candidate red materials in white light-emitting diodes (WLEDs), have received widespread attention. However, the poor water stability limits their application. Herein, a novel dodec-fluoride red phosphor Na₃Li₃In₂F₁₂:Mn⁴⁺ with good waterproof stability was successfully synthesized by solvothermal method. The crystal structure, optical property, micro-morphology, element composition, waterproof property and thermal behavior of Na₃Li₃In₂F₁₂:Mn⁴⁺ phosphor were analyzed. Under the 468 nm blue light excitation, the Na₃Li₃In₂F₁₂:Mn⁴⁺ phosphor has narrow emission bands in the area of 590–680 nm. Compared with commercial red phosphor K₂SiF₆:Mn⁴⁺, the Na₃Li₃In₂F₁₂:Mn⁴⁺ phosphor possesses better waterproof stability. When soaked in water for 360 min, the PL intensity of the Na₃Li₃In₂F₁₂:Mn⁴⁺ phosphor remains at initial 80%. Finally, warm WLEDs with CRI of 87 and CCT of 3386 K have been fabricated using blue InGaN chip, YAG:Ce³⁺ yellow phosphor and Na₃Li₃In₂F₁₂:Mn⁴⁺ red phosphor.     

A novel dazzling Eu3+‐doped whitlockite‐type phosphate red‐emitting phosphor for white light‐emitting diodes

A series of novel red‐emitting Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors were successfully synthesized using the high‐temperature solid‐state reaction method. The crystal structure, photoluminescence spectra, thermal stability, and quantum efficiency of the phosphors were investigated as a function of Eu³⁺ concentration. Detailed analysis of their structural properties revealed that all the phosphors could be assigned as whitlockite‐type β‐Ca₃(PO₄)₂ structures. Both the PL emission spectra and decay curves suggest that emission intensity is largely dependent on Eu³⁺ concentration, with no quenching as the Eu³⁺ concentration approaches 100%. A dominant red emission band centered at 611 nm indicates that Eu³⁺ occupies a low symmetry sites within the Ca₈ZnLa(PO₄)₇ host lattice, which was confirm by Judd‐Ofelt theory. Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors exhibited good color coordinates (0.6516, 0.3480), high color purity (~96.3%), and high quantum efficiency (~78%). Temperature‐dependent emission spectra showed that the phosphors possessed good thermal stability. A white light‐emitting diode (LED) device were fabricated by integrating a mixture of obtained phosphors, commercial green‐emitting and blue‐emitting phosphors into a near‐ultraviolet LED chip. The fabricated white LED device emits glaring white light with high color rendering index (83.9) and proper correlated color temperature (5570 K). These results demonstrate that the Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors are a promising candidate for solid‐state lighting.     

Development of red-emitting Ba2LaSbO6:Mn4+ phosphors for latent fingerprint detection

Latent fingerprints provide crucial affirmations of identity in forensic science. However, they are microscopic. In this study, novel fluorescence materials, Ba₂LaSbO₆:Mn⁴⁺ (BLSO:Mn⁴⁺) phosphors, were developed by a sol–gel method for the fluorescence imaging of latent fingerprints. The structural properties of the phosphors were investigated by powder X-ray diffraction (XRD) and its Rietveld refinement analyses, and transmission electron microscopy and scanning electron microscopy techniques. The photoluminescence properties of the BLSO:Mn⁴⁺ phosphors were evaluated comprehensively by recording the emission, excitation, and decay curves. The BLSO:Mn⁴⁺ phosphors provide a high-intensity red emission at 677 nm under 350 nm excitation caused by the ²E_g→⁴A_2g transition of Mn⁴⁺. The optimum concentration of Mn⁴⁺ in the BLSO host was determined to be ~0.2 mol%. The calculated Commission International de L'Eclairage (CIE) chromaticity coordinates (0.716, 0.283) of the emission from the BLSO:Mn⁴⁺ phosphor are located in the pure red region of the CIE 1931 diagram. The red-emitting BLSO:0.2Mn⁴⁺ phosphor was used as a fluorescence imaging powder for visualizing latent fingerprints on various substrates with high resolution, high contrast, and high efficiency, as well as good selectivity.     

Deep-red-emitting Ca2ScSbO6:Mn4+ phosphors with a double perovskite structure: Synthesis,characterization and potential in plant growth lighting

Mn⁴⁺-activated double-perovskite type Ca₂ScSbO₆ (CSS) phosphors were synthesized via a high-temperature solid-state reaction. The phase purity and crystal structure of obtained samples were investigated by powder X-ray diffraction (XRD). The successful incorporation of Mn⁴⁺ ions into CSS lattice was confirmed by the combination of energy-dispersive X-ray spectra (EDX) and X-ray photoelectron spectra (XPS) results. The luminescent properties of the CSS phosphors, including the photoluminescence (PL) and PL excitation (PLE) spectra, commission international de l'clairage (CIE) chromaticity coordinates, fluorescence decay curves, quantum yields and temperature-dependent PL spectra, were investigated in detail. Under 310-nm excitation, the optimized CSS:0.3%Mn⁴⁺ phosphor exhibited bright deep-red emission covering a narrow band from 640 nm to 720 nm, which overlaps with the absorbance of phytochromes. The Racah parameters B, C, and local crystal strength Dq were calculated to be 870, 2703, and 1984 cm^–1, respectively. Particularly, the emission intensity of CSS:0.3%Mn⁴⁺ still remained 61.4% at 423 K compared with that at room temperature. Therefore, all these outstanding luminescent properties provided the as-synthesized phosphors a great potential in plant growth lighting.     

Luminescence properties of Eu2+ and Mn2+ doped Sr1.7Mg0.3SiO4 phosphors

Eu²⁺, Mn²⁺ doped Sr_1.7Mg_0.3SiO₄ phosphors were prepared by high temperature solid-state reaction method. Their luminescence properties were studied. The emission spectra of Eu²⁺ singly doped Sr_1.7Mg_0.3SiO₄ consist of a blue band (455 nm) and a green band (550 nm). The relative intensities of two emissions varied with Eu²⁺ concentration. Eu²⁺ and Mn²⁺ co-doped Sr_1.7Mg_0.3SiO₄ phosphors emit three color lights and present whitish color. The blue (455 nm) and green (550 nm) emissions are attributed to the transitions of Eu²⁺, while the red (670 nm) emission is originated from the transition of Mn²⁺ ion. The results indicate the energy transfer from Eu²⁺ to Mn²⁺. The mechanism of the energy transfer is resonance-type energy transfer due to the spectral overlap between the emission of Eu²⁺and the absorption of Mn²⁺.     

Key role of Nb5+ in achieving water-resistant red emission in K2Ta1-xNbxF7:Mn4+ phosphors

Mn⁴⁺-activated fluoride is one of the most important red phosphors for white light-emitting diodes (WLEDs) with high color rendering index (CRI). Due to a lack of water resistance, their potential applications are limited. Although surface coating strategies improve the waterproof stability of fluoride red phosphors, they have downsides. It was found that Nb⁵⁺ plays an important role in improving the water resistance of Mn⁴⁺-activated oxyfluorides by preventing the hydrolysis of [MnF₆]^2-. In this work, the influence of Nb⁵⁺ on the waterproof stability of Mn⁴⁺-activated fluorides was explored. A set of synthesized K₂Ta_1-xNb_xF₇:Mn⁴⁺ phosphors exhibit tunable and superior water resistance. The photoluminescence (PL) intensity of the representative sample K₂Ta_0.6Nb_0.4F₇:5%Mn⁴⁺ remains nearly 100% of its initial value even after being immersed in water for 60 min, which is significantly higher than the commercial K₂SiF₆:Mn⁴⁺ red phosphor (8.7%). Our findings open up new possibilities for the development of waterproof fluoride red phosphors.     

Novel Mn4+ doped Ca2GdSbO6 red–emitting phosphor: A potential color converter for light-emitting diodes

As potential color converter towards white/red light–emitting diodes, novel Ca₂GdSbO₆:Mn⁴⁺ phosphors with excellent optical performances were prepared by a conventional solid–state reaction route. The as–prepared phosphors with monoclinic crystal system had abundant [SbO₆] octahedrons for Mn⁴⁺ ions to occupy and stably exist. With an excitation of 356 nm, an intense red emission peaking at 676 nm attributed to ²E_g→⁴A_2g transition of Mn⁴⁺ ions can be observed in the emission spectrum. The critical concentration of Mn⁴⁺ ions was found to be 0.6 mol% and the concentration quenching mechanism was also discussed in detail. Importantly, the Ca₂GdSbO₆:0.6%Mn⁴⁺ phosphors exhibited a high internal quantum efficiency of 38.9%.     

Blue-red dual color emitting phosphor Cs2NaLuCl6: Sb3+, Ho3+ for plant growth LEDs

The phosphor-converted light emitting diode (pc-LED) is an efficient light source to adjust growth rhythm and raise yield of plant. Blue and red light play the dominant role in the process of plant growth, thus it is meaningful to search the blue-red dual emission phosphors with high quantum field and better thermal stability for developing plant growth LED. Herein, the blue-red dual emission phosphors were synthesized by co-doping Sb³⁺ and Ho³⁺ into the Cs₂NaLuCl₆, which emitted blue (454 nm) to red (657 nm) light with increasing the content of Ho³⁺ to 25% and their relative intensity could be tuned through adjusting the concentration of Ho³⁺ due to the efficient energy transfer from Sb³⁺ to Ho³⁺. The intensity of blue emission from Sb³⁺ and red emission from Ho³⁺ could maintain 78.4 and 75.8% of the room temperature at 150 °C, respectively. Furthermore, the spectra of fabricated blue and red LEDs match well with the absorption of carotenoid, Phytochrome and Chlorophyll b, implying the samples possess great application potential in plant growth LED.     

Deep‐red photoluminescence and long persistent luminescence in double perovstkite‐type La2MgGeO6:Mn4+

A novel non‐rare‐earth doped phosphor La₂MgGeO₆:Mn⁴⁺ (LMG:Mn⁴⁺) with near‐infrared (NIR) long persistent luminescence (LPL) was successfully synthesized by solid‐state reaction. The phosphors can be effectively excited using ultraviolet light, followed by a sharp deep‐red emission peaking at 708 nm, which is originated from ²E_g → ⁴A_2g transition of Mn⁴⁺ ions. The luminescent performance was analyzed by photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The crystal field parameters were calculated to describe the environment of Mn⁴⁺ in LMG host. The LPL behaviors as well as the mechanisms were systematically discussed. This study suggests that the phosphors will broaden new horizons in designing and fabricating novel NIR long phosphorescent materials.     

Zero-thermal-quenching of LiAl5O8: Eu2+, Mn2+ phosphors by energy transfer and defects engineering

The photoluminescence behavior of inorganic phosphors is generally influenced by thermal stability, which determines the luminescence efficiency of the corresponding devices. Here, a series of Eu²⁺, Mn²⁺ co-doped LiAl₅O₈ blue-green-emitting phosphors with thermal robust are successfully fabricated. The concentration-dependent emission spectra and the decay curves of the as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ samples manifest the occurrence of the energy transfer from Eu²⁺ to Mn²⁺ ions via dipole-dipole interaction, and the corresponding emitted colors are gradually modulated from blue to green under the excitation of 310 nm. Moreover, the zero-thermal-quenching luminescence is observed when the operation temperature is up to 423 K, which is attributed to the energy release from the trapping centers to emitting centers (Eu²⁺ and Mn²⁺) at high temperature. Furthermore, a warm white light-emitting diodes (WLEDs) device with correlated color temperature of 5061 K, a color rendering index of 80.6 and long-term stability is fabricated by combining UV LED chip (λ_ex = 310 nm), as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ phosphor, commercially available red phosphor and green phosphor. These results prove the potential application of the as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ phosphor for UV-pumped WLEDs devices.     

Enhanced luminescence and energy transfer performance of double perovskite structure Gd2MgTiO6:Bi3+, Mn4+ phosphor for indoor plant growth LED lighting

Deep-red light emitting phosphors are widely used in LEDs for indoor plant growth because of the critical role played by red light in plant growth. The luminescence properties of deep-red phosphors are still not well understood at present. An energy transfer strategy is a common and effective method to improve luminescence properties. In principle, the energy transfer process may occur when the sensitizer's emission spectra overlap with the activator's excitation spectra. In this work, Bi³⁺ and Mn⁴⁺ were incorporated into the matrix of Gd₂MgTiO₆ as sensitisers and activators, respectively. Mn⁴⁺ ions tend to occupy the [TiO₆] octahedral site and the Bi³⁺ ions are expected to substituted in the site of Gd³⁺. The energy transfer process from Bi³⁺ to Mn⁴⁺ was realised and the photoluminescence (PL) intensity of Mn⁴⁺ increased with the doping content of Bi³⁺. Upon excitation at 375 nm, the PL intensity of Mn⁴⁺ increased to 116.4% when the doping concentration of Bi³⁺ reached 0.3%. Finally, the pc-LED devices were prepared by a Gd₂MgTiO₆:Bi³⁺, Mn⁴⁺ phosphor. The high red luminescence indicated that this phosphor has potential applications in indoor LED lighting.